aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-01-15powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREEFUJITA Tomonori
cc1: warnings being treated as errors arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_attach_node': arch/powerpc/platforms/pseries/dlpar.c:239: error: unused variable 'ent' arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_detach_node': arch/powerpc/platforms/pseries/dlpar.c:271: error: unused variable 'prop' arch/powerpc/platforms/pseries/dlpar.c:270: error: unused variable 'parent' make[3]: *** [arch/powerpc/platforms/pseries/dlpar.o] Error 1 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/pseries: Fix xics interrupt affinityAnton Blanchard
Commit 57b150cce8e004ddd36330490a68bfb59b7271e9 (irq: only update affinity if ->set_affinity() is sucessfull) broke xics irq affinity. We need to use the cpumask passed in, instead of accessing ->affinity directly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/swsusp_32: Fix TLB invalidationAnton Vorontsov
It seems there is a thinko in the TLB invalidation code that makes the tlbie in the loop executed just once. The intended check was probably 'gt', not 'lt'. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/8xx: Always pin kernel instruction TLBJoakim Tjernlund
Various kernel asm modifies SRR0/SRR1 just before executing a rfi. If such code crosses a page boundary you risk a TLB miss which will clobber SRR0/SRR1. Avoid this by always pinning kernel instruction TLB space. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulatorMark Brown
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15sh: mach-ecovec24: Add motion sensor driver support.NISHIMOTO Hiroki
This patch adds support for the lis3lv02d motion sensor connected via i2c on the Ecovec board. Tested with evtest. Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-14alpha: cpumask_of_node() should handle -1 as a nodeAnton Blanchard
CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Matt Turner <mattst88@gmail.com> CC: linux-alpha@vger.kernel.org CC: Rusty Russell <rusty@rustcorp.com.au> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Blanchard <anton@samba.org>
2010-01-14Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] tape_char: add missing compat_ptr conversion [S390] zcrypt: add sanity check before copy_from_user() [S390] unwire sys_recvmmsg again [S390] con3215: remove empty ioctl function [S390] dasd: add proper compat pointer conversion for symmetrix ioctl [S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls [S390] bug: implement arch specific __WARN macro [S390] Move __cpu_logical_map to smp.c [S390] tape_block: remove ioctl function [S390] smp: remove volatile type quilifier from __cpu_logical_map [S390] smp: setup smp_processor_id early [S390] use helpers for rlimits [S390] fs3270: add missing compat ptr conversion [S390] vmcp: add missing compat ptr conversion [S390] cio: add missing compat ptr conversion [S390] dasd: add missing compat ptr conversion [S390] remove superfluous TIF_USEDFPU bit [S390] duplicate SIGTRAP on signal delivery. [S390] clear TIF_SINGLE_STEP for new process. [S390] fix loading of PER control registers for utrace.
2010-01-14Unrot uml mconsole a bitAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-14ARM: S3C: NAND: Check the existence of nr_map before copyingRamax Lo
Since the structure field nr_map is optional, we need to check whether the chip number map is provided to avoid unexpected NULL pointer exception. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-13zlib: Fix build of powerpc boot wrapperBenjamin Herrenschmidt
Commit ac4c2a3bbe5db5fc570b1d0ee1e474db7cb22585 broke the build of all powerpc boot wrappers. It attempts to add an include of autoconf.h but used the wrong path for it. It also adds -D__KERNEL__ to our boot wrapper, both things that we pretty much didn't do on purpose so far. We want our boot wrapper to remain independent enough of the kernel for various reasons, one of them being that you can "wrap" an existing kernel at distro install time which allows to ship one kernel image and a set of boot wrappers for different platforms, the wrappers don't have to be built out of the same kernel build tree. It's also incorrect to do what the patch does in our boot environment since we may not have a proper alignment exception handler which means we may not be able to fixup the few cases where an unaligned access will need SW emulation (depends on the core variant, could be when crossing page or segment boundaries for example). This patch fixes it by putting the old code back in and using the new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set, which happens not to be set on powerpc since we don't include autoconf.h. It also reverts the changes to our boot wrapper Makefile. This means that x86 should, afaik, keep the optimisations since its boot wrapper does include autoconf.h and define __KERNEL__ (though I doubt they make that much different outside of slow embedded processors). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-13[S390] unwire sys_recvmmsg againHeiko Carstens
sys_recvmmsg is reachable via sys_socketcall. So unwire it again since there is no point in having two entry points for it. Also put it to the ignore list so we don't get reminded anymore in order to wire it up. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] mmap: add missing compat_ptr conversion to both mmap compat syscallsHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] bug: implement arch specific __WARN macroHeiko Carstens
This one will trap, generates shorter code and emits better debug data than the generic version. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] Move __cpu_logical_map to smp.cHeiko Carstens
Finally move it to the place where it belongs to and make get rid of it for !CONFIG_SMP. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] smp: remove volatile type quilifier from __cpu_logical_mapHeiko Carstens
Remove pointless qualifier. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] smp: setup smp_processor_id earlyHeiko Carstens
smp_processor_id() is supposed to work before setup_arch() gets called. Before that smp_processor_id() may return just an arbitrary value that is contained in the uninitialized boot lowcore. So provide the arch function which will override the weak function in init/main.c. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] use helpers for rlimitsJiri Slaby
Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd or ACCESS_ONCE if not applicable. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] remove superfluous TIF_USEDFPU bitMartin Schwidefsky
The TIF_USEDFPU bit is always 0 for s390 and it is not tested anywhere. Remove the bit. At the same time remove the calls to clear_used_math() as well. The PF_USED_MATH bit is never set for s390 either. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] duplicate SIGTRAP on signal delivery.Martin Schwidefsky
The code in do_signal sets the TIF_SINGLE_STEP bit and calls tracehook_signal_handler after the signal frame has been set up. This causes two SIGTRAP signals to be delivered to the tracer. Stop setting the TIF_SINGLE_STEP bit in do_signal to get the correct number of SIGTRAPs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] clear TIF_SINGLE_STEP for new process.Martin Schwidefsky
Clear the TIF_SINGLE_STEP bit in copy_thread. The new process did not get a PER event of its own. It is wrong deliver a SIGTRAP that was meant for the parent process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] fix loading of PER control registers for utrace.Martin Schwidefsky
If the current task enables / disables PER tracing for itself the PER control registers need to be loaded in FixPerRegisters. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13Makefile: do not override LC_CTYPEMichal Marek
Setting LC_CTYPE=C breaks localized messages in some setups. With only LC_COLLATE=C and LC_NUMERIC=C, we get almost all we need, except for not so defined character classes and tolower()/toupper(). The former is not a big issue, because we can assume that e.g. [:alpha:] will always include a-zA-Z and we only ever process ASCII input. The latter seems only affect arch/sh/tools/gen-mach-types, which we can handle separately. So after this patch the meaning of ranges like [a-z], the behavior of sort and join, etc. should be the same everywhere and at the same time gcc should be able to print localized waring and error messages. LC_NUMERIC=C might not be necessary, but setting it doesn't hurt. Reported-by: Simon Horman <horms@verge.net.au> Reported-by: Sergei Trofimovich <slyfox@inbox.ru> Acked-by: H. Peter Anvin <hpa@zytor.com> Tested-by: Simon Horman <horms@verge.net.au> Tested-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-01-13x86: xen: 64-bit kernel RPL should be 0Ian Campbell
Under Xen 64 bit guests actually run their kernel in ring 3, however the hypervisor takes care of squashing descriptor the RPLs transparently (in order to allow them to continue to differentiate between user and kernel space CS using the RPL). Therefore the Xen paravirt backend should use RPL==0 instead of 1 (or 3). Using RPL==1 causes generic arch code to take incorrect code paths because it uses "testl $3, <CS>, je foo" type tests for a userspace CS and this considers 1==userspace. This issue was previously masked because get_kernel_rpl() was omitted when setting CS in kernel_thread(). This was fixed when kernel_thread() was unified with 32 bit in f443ff4201dd25cd4dec183f9919ecba90c8edc2. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1263377768-19600-2-git-send-email-ian.campbell@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13x86: kernel_thread() -- initialize SS to a known stateCyrill Gorcunov
Before the kernel_thread was converted into "C" we had pt_regs::ss set to __KERNEL_DS (by SAVE_ALL asm macro). Though I must admit I didn't find any *explicit* load of %ss from this structure the better to be on a safe side and set it to a known value. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Cc: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1263377768-19600-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13x86/agp: Fix agp_amd64_init and agp_amd64_cleanupFUJITA Tomonori
This fixes the regression introduced by the commit f405d2c02395a74d3883bd03ded36457aa3697ad. The above commit fixes the following issue: http://marc.info/?l=linux-kernel&m=126192729110083&w=2 However, it doesn't work properly when you remove and insert the agp_amd64 module again. agp_amd64_init() and agp_amd64_cleanup should be called only when gart_iommu is not called earlier (that is, the GART IOMMU is not enabled). We need to use 'gart_iommu_aperture' to see if GART IOMMU is enabled or not. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: mitov@issp.bas.bg Cc: davej@redhat.com LKML-Reference: <20100104161603L.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13x86: SGI UV: Fix mapping of MMIO registersMike Travis
This fixes the problem of the initialization code not correctly mapping the entire MMIO space on a UV system. A side effect is the map_high() interface needed to be changed to accommodate different address and size shifts. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Mike Habeck <habeck@sgi.com> Cc: <stable@kernel.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4B479202.7080705@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13x86: mce.h: Fix warning in header checksAlan Cox
Someone isn't reading their build output: Move the definition out of the exported header. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: linux-kernel@vger.kernelorg Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13perf: Stop stack frame walking off kernel addresses boundariesFrederic Weisbecker
While processing kernel perf callchains, an bad entry can be considered as a valid stack pointer but not as a kernel address. In this case, we hang in an endless loop. This can happen in an x86-32 kernel after processing the last entry in a kernel stacktrace. Just stop the stack frame walking after we encounter an invalid kernel address. This fixes a hard lockup in x86-32. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1262227945-27014-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options ARM: Fix wrong dmb ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code" ARM: 5867/1: Update U300 defconfig ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs [ARM] pxa: fix strange characters in zaurus gpio .desc ARM: add missing recvmmsg syscall number [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*() [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *' [ARM] pxa: enable L2 if present in XSC3 [ARM] pxa: do not enable L2 after MMU is enabled
2010-01-12Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits) MIPS: Ignore vmlinux.* MIPS: Move vmlinux.ecoff to arch/mips/boot MIPS: cpumask_of_node() should handle -1 as a node MIPS: Octeon: Use non-overflowing arithmetic in sched_clock MIPS: Malta, PowerTV: Remove unnecessary "Linux started" MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE. MIPS: AR7: Remove unused prom_getchar() MIPS: PowerTV: Remove extra r4k_clockevent_init() call MIPS: Cobalt use strlcat() for the command line arguments MIPS: Octeon: Add sched_clock() to csrc-octeon.c MIPS: TXx9: Cleanup builtin-cmdline processing MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init() MIPS: PowerTV: Remove unused platform_die() MIPS: PowerTV: Remove mips_machine_halt() MIPS: PowerTV: Remove unused ptv_memsize MIPS: PowerTV: Remove unused prom_getcmdline() MIPS: AR7: Remove kgdb_enabled MIPS: Alchemy: Correct code taking the size of a pointer MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c MIPS: VR41xx: Use strlcat() for the command line arguments ...
2010-01-12m68knommu: fix definitions of __pa() and __va()Greg Ungerer
Fix compilation breakage of all m68knommu targets: CC arch/m68knommu/kernel/asm-offsets.s In file included from include/linux/sched.h:77, from arch/m68knommu/kernel/asm-offsets.c:12: include/linux/percpu.h: In function 'per_cpu_ptr_to_phys': include/linux/percpu.h:161: error: implicit declaration of function 'virt_to_phy This is broken in linux-2.6.33-rc3. Change the definitions of __pa() and __va() to not use virt_to_phys() and phys_to_virt(). Trivial 1:1 conversion required for the non-MMU case. A side effect if this is that the m68knommu can now use asm/virtconvert.h for the definition of virt_to_phys() and phys_to_virt(). Also cleaned up the definition of page_to_phys() when moving into virtconvert.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-12ARM: Ensure ARMv6/7 mm files are built using appropriate assembler optionsRussell King
A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12ARM: Fix wrong dmbRussell King
The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12MIPS: Ignore vmlinux.*Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Move vmlinux.ecoff to arch/mips/bootYoichi Yuasa
It moves to the same directory as the boot files in other formats. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/796/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: cpumask_of_node() should handle -1 as a nodeAnton Blanchard
pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard <anton@samba.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Patchwork: http://patchwork.linux-mips.org/patch/831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Octeon: Use non-overflowing arithmetic in sched_clockDavid Daney
With typical mult and shift values, the calculation for Octeon's sched_clock overflows when using 64-bit arithmetic. Use 128-bit calculations instead. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/849/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Malta, PowerTV: Remove unnecessary "Linux started"Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/813/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.Yoichi Yuasa
Builtin cmdline is copied by arch_mem_init(). Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: AR7: Remove unused prom_getchar()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove extra r4k_clockevent_init() callDavid VomLehn
A call to r4k_clocksource_init() was added to plat_time_init(), but when init_mips_clock_source() calls the same function, boot fails in clockevents_register_device(). This patch removes the extraneous call. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Patchwork: http://patchwork.linux-mips.org/patch/803/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Cobalt use strlcat() for the command line argumentsYoichi Yuasa
Tested with CoLo v1.22 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/807/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: Octeon: Add sched_clock() to csrc-octeon.cDavid Daney
With the advent of function graph tracing on MIPS, Octeon needs a high precision sched_clock() implementation. Without it, most timing numbers are reported as 0.000. This new sched_clock just uses the 64-bit cycle counter appropriately scaled. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/805/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: TXx9: Cleanup builtin-cmdline processingAtsushi Nemoto
Since commit 898d357b5262f9e26bc2418e01f8676e80d9867e (lmo) / 6acc7d485c24c00e111c61b2e6dff9180faebcae (kernel.org) ("Fix and enhance built-in kernel command line") arcs_cmdline[] does not contain built-in command line. The commit introduce CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE to control built-in command line, and now we can use them instead of platform-specific built-in command line processing. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Patchwork: http://patchwork.linux-mips.org/patch/802/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/801/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove unused platform_die()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/800/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove mips_machine_halt()Yoichi Yuasa
mips_machine_halt() is same as mips_machine_restart(). Also delete the registration of _machine_halt and pm_power_off because mips_machine_halt() is the restart function. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/798/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove unused ptv_memsizeYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/799/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: PowerTV: Remove unused prom_getcmdline()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/797/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 09:53:10 +0000