aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-10-17x86: return correct error code from child_rip in x86_64 entry.SAndrey Mirkin
Right now register edi is just cleared before calling do_exit. That is wrong because correct return value will be ignored. Value from rax should be copied to rdi instead of clearing edi. AK: changed to 32bit move because it's strictly an int [ tglx: arch/x86 adaptation ] Signed-off-by: Andrey Mirkin <major@openvz.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17i386: avoid temporarily inconsistent pte-sJan Beulich
One more of these issues (which were considered fixed a few releases back): other than on x86-64, i386 allows set_fixmap() to replace already present mappings. Consequently, on PAE, care must be taken to not update the high half of a pte while the low half is still holding the old value. [ tglx: arch/x86 adaptation ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> arch/x86/mm/pgtable_32.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
2007-10-17i386: fix section mismatch warning in intel.cSam Ravnborg
Fix following section mismatch warning: WARNING: vmlinux.o(.text+0xc88c): Section mismatch: reference to .init.text:trap_init_f00f_bug (between 'init_intel' and 'cpuid4_cache_lookup') init_intel are __cpuint where trap_init_f00f_bug is __init. Fixed by declaring trap_init_f00f_bug __cpuinit. Moved the defintion of trap_init_f00f_bug to the sole user in init.c so the ugly prototype in intel.c could get killed. Frank van Maarseveen <frankvm@frankvm.com> supplied the .config used to reproduce the warning. [ tglx: arch/x86 adaptation ] Cc: Frank van Maarseveen <frankvm@frankvm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17i386: Fix section mismatchSatyam Sharma
Fix bugzilla #8679 WARNING: arch/i386/kernel/built-in.o(.data+0x2148): Section mismatch: reference to .init.text: (between 'thermal_throttle_cpu_notifier' and 'mtrr_mutex') comes because struct notifier_block thermal_throttle_cpu_notifier in arch/i386/kernel/cpu/mcheck/therm_throt.c goes in .data section but the notifier callback function itself has been marked __cpuinit which becomes __init == .init.text when HOTPLUG_CPU=n. The warning is bogus because the callback will never be called out if HOTPLUG_CPU=n in the first place (as one can see from kernel/cpu.c, the cpu_chain itself is __cpuinitdata :-) So, let's mark thermal_throttle_cpu_notifier as __cpuinitdata to fix the section mismatch warning. [ tglx: arch/x86 adaptation ] Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17x86: fix off-by-one in find_next_zero_stringAndrew Hastings
Fix an off-by-one error in find_next_zero_string which prevents allocating the last bit. [ tglx: arch/x86 adaptation ] Signed-off-by: Andrew Hastings <abh@cray.com> on behalf of Cray Inc. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17i386: export i386 smp_call_function_mask() to modulesLaurent Vivier
This patch export i386 smp_call_function_mask() with EXPORT_SYMBOL(). This function is needed by KVM to call a function on a set of CPUs. [ tglx: arch/x86 adaptation ] Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17x86: Install unstripped copy of 64bit vdso to diskRoland McGrath
This keeps an unstripped copy of the 64bit vDSO images built before they are stripped and embedded in the kernel. The unstripped copies get installed in $(MODLIB)/vdso/ by "make install" (or you can explicitly use the subtarget "make vdso_install"). These files can be useful when they contain source-level debugging information. [ tglx: arch/x86 adaptation ] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17x86_64: install unstripped copies of compat vdso on diskRoland McGrath
This keeps an unstripped copy of the vDSO images built before they are stripped and embedded in the kernel. The unstripped copies get installed in $(MODLIB)/vdso/ by "make install" (or you can explicitly use the subtarget "make vdso_install"). These files can be useful when they contain source-level debugging information. [ tglx: arch/x86 adaptation ] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17i386: setup_trampoline() must be __cpuinitAdrian Bunk
WARNING: arch/i386/kernel/built-in.o(.text+0xf201): Section mismatch: reference to .init.data:trampoline_end (between 'setup_trampoline' and 'cpu_coregroup_map') WARNING: arch/i386/kernel/built-in.o(.text+0xf207): Section mismatch: reference to .init.data:trampoline_data (between 'setup_trampoline' and 'cpu_coregroup_map') WARNING: arch/i386/kernel/built-in.o(.text+0xf21a): Section mismatch: reference to .init.data:trampoline_data (between 'setup_trampoline' and 'cpu_coregroup_map') Harmless but annoying warnings present when building an i386 SMP kernel with CONFIG_HOTPLUG_CPU=n and gcc < 4.0 . [ tglx: arch/x86 adaptation ] Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17i386: make Oprofile call shutdown() only once per sessionStephane Eranian
Oprofile: call model->shutdown() only once to avoid calling release_ev*() multiple times [ tglx: arch/x86 adaptation ] Signed-off-by: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17x86: C1E late detection fix. Really switch off lapic timerThomas Gleixner
Doh, I completely missed that devices marked DUMMY are not running the set_mode function. So we force broadcasting, but we keep the local APIC timer running. Let the clock event layer mark the device _after_ switching it off. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-17Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [SCSI] Remove full sg table memset() [SCSI] ide-scsi: remove usage of sg_last() Fix loop terminating conditions in fill_sg(). [BLOCK] Clear sg entry before filling in blk_rq_map_sg() IA64: iommu uses sg_next with an invalid sg element cciss: disable DMA refetch on Smart Array P600 swiotlb: fix map_sg failure handling SPARC64: fix iommu sg chaining [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits) [POWERPC] Fix vmemmap warning in init_64.c [POWERPC] Fix 64 bits vDSO DWARF info for CR register [POWERPC] Add 1TB workaround for PA6T [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs [POWERPC] Quieten cache information at boot [POWERPC] Quieten clockevent printk [POWERPC] Enable SLUB in *_defconfig [POWERPC] Fix 1TB segment detection [POWERPC] Fix iSeries_hpte_insert prototype [POWERPC] Fix copyright symbol [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers [POWERPC] ibmebus: Add device creation and bus probing based on of_device [POWERPC] ibmebus: Remove bus match/probe/remove functions [POWERPC] Move of_device allocation into of_device.[ch] [POWERPC] mpc52xx: device tree changes for FEC and MDIO [POWERPC] bestcomm: GenBD task support [POWERPC] bestcomm: FEC task support [POWERPC] bestcomm: ATA task support [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200 [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes ...
2007-10-17Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: Remove magic macros for screen_info structure members [x86] remove uses of magic macros for boot_params access
2007-10-17Update help text for CONFIG_CRASH_DUMPRandy Dunlap
Fix typos in CONFIG_RELOCATABLE. Use tab + 2 spaces for indentation on all lines. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Bernhard Walle <bwalle@suse.de> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Haren Myneni <hbabu@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17spin_lock_unlocked cleanupsRoel Kluin
Replace some SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lk201: remove obsolete driverMaciej W. Rozycki
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be used by the old dz.c and zs.c drivers, which is now orphan code referred to from nowhere and does not build anymore. A modern replacement is available as drivers/input/keyboard/lkkbd.c. There are no plans to do anything about this piece of code and it does not fit anywhere anymore, so it is not just a matter of maintenance or the lack of. There are still some bits that might be added to the new lkkbd.c driver based on the old code, and the embedded hardware documentation which is otherwise quite hard to get hold of might be useful to keep too. Both of these can be done separately though. RIP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove dma_cache_(wback|inv|wback_inv) functionsRalf Baechle
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17remove include/asm-*/ipc.hAdrian Bunk
All asm/ipc.h files do only #include <asm-generic/ipc.h>. This patch therefore removes all include/asm-*/ipc.h files and moves the contents of include/asm-generic/ipc.h to include/linux/ipc.h. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17add-vmcore: add a prefix "VMCOREINFO_" to the vmcoreinfo macrosKen'ichi Ohmichi
Add a prefix "VMCOREINFO_" to the vmcoreinfo macros. Old vmcoreinfo macros were defined as generic names SYMBOL/SIZE/OFFSET /LENGTH/CONFIG, and it is impossible to grep for them. So these names should be changed. This discussion is the following: http://www.ussg.iu.edu/hypermail/linux/kernel/0709.1/0415.html Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17add-vmcore: use the existing ia64_tpa() instead of asm codeKen'ichi Ohmichi
Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Add vmcoreinfoKen'ichi Ohmichi
This patch set frees the restriction that makedumpfile users should install a vmlinux file (including the debugging information) into each system. makedumpfile command is the dump filtering feature for kdump. It creates a small dumpfile by filtering unnecessary pages for the analysis. To distinguish unnecessary pages, it needs a vmlinux file including the debugging information. These days, the debugging package becomes a huge file, and it is hard to install it into each system. To solve the problem, kdump developers discussed it at lkml and kexec-ml. As the result, we reached the conclusion that necessary information for dump filtering (called "vmcoreinfo") should be embedded into the first kernel file and it should be accessed through /proc/vmcore during the second kernel. (http://www.uwsg.iu.edu/hypermail/linux/kernel/0707.0/1806.html) Dan Aloni created the patch set for the above implementation. (http://www.uwsg.iu.edu/hypermail/linux/kernel/0707.1/1053.html) And I updated it for multi architectures and memory models. (http://lists.infradead.org/pipermail/kexec/2007-August/000479.html) Signed-off-by: Dan Aloni <da-x@monatomic.org> Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17powerpc: Use linux/elfcore-compat.hRoland McGrath
This makes powerpc64's compat code use the new linux/elfcore-compat.h, reducing some hand-copied duplication. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17core_pattern: ignore RLIMIT_CORE if core_pattern is a pipeNeil Horman
For some time /proc/sys/kernel/core_pattern has been able to set its output destination as a pipe, allowing a user space helper to receive and intellegently process a core. This infrastructure however has some shortcommings which can be enhanced. Specifically: 1) The coredump code in the kernel should ignore RLIMIT_CORE limitation when core_pattern is a pipe, since file system resources are not being consumed in this case, unless the user application wishes to save the core, at which point the app is restricted by usual file system limits and restrictions. 2) The core_pattern code should be able to parse and pass options to the user space helper as an argv array. The real core limit of the uid of the crashing proces should also be passable to the user space helper (since it is overridden to zero when called). 3) Some miscellaneous bugs need to be cleaned up (specifically the recognition of a recursive core dump, should the user mode helper itself crash. Also, the core dump code in the kernel should not wait for the user mode helper to exit, since the same context is responsible for writing to the pipe, and a read of the pipe by the user mode helper will result in a deadlock. This patch: Remove the check of RLIMIT_CORE if core_pattern is a pipe. In the event that core_pattern is a pipe, the entire core will be fed to the user mode helper. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: <martin.pitt@ubuntu.com> Cc: <wwoods@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17pcmcia: CompactFlash driver for PA Semi Electra boardsOlof Johansson
Driver for the CompactFlash slot on the PA Semi Electra eval board. It's a simple device sitting on localbus, with interrupts and detect/voltage control over GPIO. The driver is implemented as an of_platform driver, and adds localbus as a bus being probed by the of_platform framework. [akpm@linux-foundation.org: cleanups] [olof@lixom.net: fix build] Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@infradead.org> Cc: Milton Miller <miltonm@bga.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17KCONFIG: Make "Instrumentation support" non-EXPERIMENTALRobert P. J. Day
It makes more sense to make instrumentation support experimental on a case-by-case basis. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove workaround for unimmunized rcu_dereference from mce_log()Paul E. McKenney
Remove the rmb() from mce_log(), since the immunized version of rcu_dereference() makes it unnecessary. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Make unregister_binfmt() return voidAlexey Dobriyan
list_del() hardly can fail, so checking for return value is pointless (and current code always return 0). Nobody really cared that return value anyway. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Use list_head in binfmt handlingAlexey Dobriyan
Switch single-linked binfmt formats list to usual list_head's. This leads to one-liners in register_binfmt() and unregister_binfmt(). The downside is one pointer more in struct linux_binfmt. This is not a problem, since the set of registered binfmts on typical box is very small -- (ELF + something distro enabled for you). Test-booted, played with executable .txt files, modprobe/rmmod binfmt_misc. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17oom: move prototypes to appropriate header fileDavid Rientjes
Move the OOM killer's extern function prototypes to include/linux/oom.h and include it where necessary. [clg@fr.ibm.com: build fix] Cc: Andrea Arcangeli <andrea@suse.de> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17powerpc: add Altivec/VMX state to coredumpsMark Nelson
Update dump_task_altivec() (which has so far never been put to use) so that it dumps the Altivec/VMX registers (VR[0] - VR[31], VSCR and VRSAVE) in the same format as the ptrace get_vrregs(), and add the appropriate glue typedef and #defines to make it work. A new note type of NT_PPC_VMX was chosen to be 0x100 (arbitrarily) because it allows the low range values to be used for more generic purposes and 0x100 seems an adequate starting point for PowerPC extensions. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17x86: replace NT_PRXFPREG with ELF_CORE_XFPREG_TYPE #defineMark Nelson
Replace NT_PRXFPREG with ELF_CORE_XFPREG_TYPE in the coredump code which allows for more flexibility in the note type for the state of 'extended floating point' implementations in coredumps. New note types can now be added with an appropriate #define. This does #define ELF_CORE_XFPREG_TYPE to be NT_PRXFPREG in all current users so there's are no change in behaviour. This will let us use different note types on powerpc for the Altivec/VMX state that some PowerPC cpus have (G4, PPC970, POWER6) and for the SPE (signal processing extension) state that some embedded PowerPC cpus from Freescale have. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Merge branch 'for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-mpc52xx ↵Paul Mackerras
into merge
2007-10-17Merge branch 'fixes-2.6.24' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2007-10-17[POWERPC] Fix vmemmap warning in init_64.cTony Breeds
Use the right printk format to silence the following warning. CC arch/powerpc/mm/init_64.o arch/powerpc/mm/init_64.c: In function 'vmemmap_populate': arch/powerpc/mm/init_64.c:243: warning: format '%p' expects type 'void *', but argument 4 has type 'long unsigned int' Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Fix 64 bits vDSO DWARF info for CR registerBenjamin Herrenschmidt
The current DWARF info for CR are incorrect, causing the gcc unwinder to go to lunch if we take a segfault in the vdso. This fixes it. Problem identified by Andrew Haley, and fix provided by Jakub Jelinek (thanks !). Unfortunately, a bug in gcc cause it to not quite work either, but that is being fixed separately with something around the lines of: linux-unwind.h: fs->regs.reg[R_CR2].loc.offset = (long) &regs->ccr - new_cfa; + /* CR? regs are just 32-bit and PPC is big-endian. */ + fs->regs.reg[R_CR2].loc.offset += sizeof (long) - 4; (According to Jakub) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Add 1TB workaround for PA6TOlof Johansson
PA6T has a bug where the slbie instruction does not honor the large segment bit. As a result, we have to always use slbia when switching context. We don't have to worry about changing the slbie's during fault processing, since they should never be replacing one VSID with another using the same ESID. I.e. there's no risk for inserting duplicate entries due to a failed slbie of the old entry. So as long as we clear it out on context switch we should be fine. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configsAnton Blanchard
Enable NO_HZ and high res timers for the ppc64 and pseries defconfigs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Quieten cache information at bootAnton Blanchard
After 6 years the ppc64 kernel still thinks its important to tell me my cache line size is 0x80 bytes. I think most people who care know that by now. The rest probably cant even understand the hex output. Since we might have misconfigured firmware or cpus that have a linesize that isnt 128 bytes, I still print it out for those cases. If people would prefer to remove it completely, lets do it. Also for lpar remove the htab_address printout since its not used. Anton ppc64 boot log usability expert Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Quieten clockevent printkAnton Blanchard
The clockevent bootup message only needs to be KERN_INFO. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Enable SLUB in *_defconfigAnton Blanchard
When checking out the new NO_HZ support in powerpc, I noticed we never slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu timer that causes this. After switching to SLUB I see some nice 4 second sleeps which is the limit on this POWER6 box (the decrementer ticks at 512MHz): slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 3.96 sec slept 3.80 sec slept 2.99 sec Since SLUB is now the default and some powerpc defconfigs already enable it, lets enable SLUB across the board for consistency. While doing this I also noticed that the maple defconfig has SLAB debugging enabled which is sure to make your box nice and slow. Fix that too. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Fix 1TB segment detectionOlof Johansson
Buglet in the 1TB detection makes it return after checking the first property word, even if it's not a match. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Fix iSeries_hpte_insert prototypeStephen Rothwell
Commit 1189be6508d45183013ddb82b18f4934193de274 ([POWERPC] Use 1TB segments) added an argument to hpte_insert. Also make iSeries_hpte_insert static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Fix copyright symbolStephen Rothwell
It seems to have been munged by patchwork. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and ↵Joachim Fenkes
eHEA drivers Replace struct ibmebus_dev and struct ibmebus_driver with struct of_device and struct of_platform_driver, respectively. Match the external ibmebus interface and drivers using it. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] ibmebus: Add device creation and bus probing based on of_deviceJoachim Fenkes
The devtree root is now searched for devices matching a built-in whitelist during boot, so these devices appear on the bus from the beginning. It is still possible to manually add/remove devices to/from the bus by using the probe/remove sysfs interface. Also, when a device driver registers itself, the devtree is matched against its matchlist. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] ibmebus: Remove bus match/probe/remove functionsJoachim Fenkes
Remove old code that will be replaced by rewritten and shorter functions in the next patch. Keep struct ibmebus_dev and struct ibmebus_driver for now, but replace ibmebus_{,un}register_driver() by dummy functions. This way, the kernel will still compile and run during the transition and git bisect will be happy. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Move of_device allocation into of_device.[ch]Joachim Fenkes
Extract generic of_device allocation code from of_platform_device_create() and move it into of_device.[ch], called of_device_alloc(). Also, there's now of_device_free() which puts the device node. This way, bus drivers that build on of_platform (like ibmebus will) can build upon this code instead of reinventing the wheel. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17Fix loop terminating conditions in fill_sg().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 03:04:27 +0000