aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-11-08[POWERPC] Include udbg.h when using udbg_printfwill schmidt
This fixes the error error: implicit declaration of function "udbg_printf" We have a few spots where we reference udbg_printf() without #including udbg.h. These are within #ifdef DEBUG blocks, so unnoticed until we do a #define DEBUG or #define DEBUG_LOW nearby. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] Fix cache line vs. block size confusionBenjamin Herrenschmidt
We had an historical confusion in the kernel between cache line and cache block size. The former is an implementation detail of the L1 cache which can be useful for performance optimisations, the later is the actual size on which the cache control instructions operate, which can be different. For some reason, we had a weird hack reading the right property on powermac and the wrong one on any other 64 bits (32 bits is unaffected as it only uses the cputable for cache block size infos at this stage). This fixes the booting-without-of.txt documentation to mention the right properties, and fixes the 64 bits initialization code to look for the block size first, with a fallback to the line size if the property is missing. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] Fix sysctl table check failure on PowerMacAlexey Dobriyan
kernel was marked with 0755. Everywhere else it's 0555. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] Fix CONFIG_SMP=n build breakOlof Johansson
Fix two build errors on powerpc allyesconfig + CONFIG_SMP=n: arch/powerpc/platforms/built-in.o: In function `cpu_affinity_set': arch/powerpc/platforms/cell/spu_priv1_mmio.c:78: undefined reference to `.iic_get_target_id' arch/powerpc/platforms/built-in.o: In function `iic_init_IRQ': arch/powerpc/platforms/cell/interrupt.c:397: undefined reference to `.iic_setup_cpu' Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] bootwrapper: Revert ps3 binary flag usage, and remove .bin suffixScott Wood
The ps3 target produces two images, and the binary one is not the "primary" image that corresponds to the -o flag; thus, it no longer uses the generic binary flag. On platforms which do use the binary flag, it no longer produces a .bin suffix, so that the output file matches what was passed to the -o flag. This should fix the zImage ln problems for the ps3 target. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] Fix mv643xx_pci sysfs .read and .write functionsDale Farnsworth
Commit 91a69029 introduced an additional parameter to the .read and .write methods for sysfs binary attributes. Two mv64x60_pci functions were missed in that patch, resulting in these errors: /cache/git/linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c:77: warning: initialization from incompatible pointer type /cache/git/linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c:78: warning: initialization from incompatible pointer type Add the missing "struct bin_attribute *" parameter. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] i8259: Add disable methodAurelien Jarno
Since commit 76d2160147f43f982dfe881404cfde9fd0a9da21, the NE2000 card is not working anymore on PPC and POWERPC and produces WATCHDOG timeouts. The patch below fixes that the same way it has been done on x86, x86_64 and MIPS. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] Read back MSI message in rtas_setup_msi_irqs() so restore worksMichael Ellerman
There are plans afoot to use pci_restore_msi_state() to restore MSI state after a device reset. In order for this to work for the RTAS MSI backend, we need to read back the MSI message from config space after it has been setup by firmware. This should be sufficient for restoring the MSI state after a device reset, however we will need to revisit this for suspend to disk if that is ever implemented on pseries. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08[POWERPC] Fix build break in arch/ppc/syslib/m8260_setup.cOlof Johansson
Fix build break and warnings in current mainline git: arch/ppc/syslib/m8260_setup.c: In function 'm8260_setup_arch': arch/ppc/syslib/m8260_setup.c:63: error: implicit declaration of function 'identify_ppc_sys_by_name_and_id' arch/ppc/syslib/m8260_setup.c:64: warning: passing argument 1 of 'in_be32' makes pointer from integer without a cast arch/ppc/syslib/m8260_setup.c: In function 'm8260_show_cpuinfo': arch/ppc/syslib/m8260_setup.c:158: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'long unsigned int' arch/ppc/syslib/m8260_setup.c:158: warning: format '%d' expects type 'int', but argument 6 has type 'long unsigned int' arch/ppc/syslib/m8260_setup.c:158: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'long unsigned int' arch/ppc/syslib/m8260_setup.c:158: warning: format '%u' expects type 'unsigned int', but argument 8 has type 'long unsigned int' arch/ppc/syslib/m8260_setup.c:158: warning: format '%u' expects type 'unsigned int', but argument 9 has type 'long unsigned int' make[1]: *** [arch/ppc/syslib/m8260_setup.o] Error 1 make[1]: *** Waiting for unfinished jobs.... Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08sh: Kill off broken snapgear ds1302 code.Paul Mundt
This will force the snapgear boards to use the on-chip SH RTC instead, until the rtc-ds1302 driver is merged. The current code is broken and hasn't built in some time, so just kill it off and get the board working again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07[ARM] Allow watchdog drivers to be selected againRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-07sh: Fix heartbeart on Solution Engine seriesNobuhiro Iwamatsu
Access size to LED is not added on Solution Engine series. LED doesn't work. Fixed this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-06[SPARC]: Remove duplicate includes.Lucas Woods
Signed-off-by: Lucas Woods <woodzy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07sh: hs7751rvoip: Kill off dead IPR IRQ mappings.Paul Mundt
This is dead code, and doesn't build anyways. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: hs7751rvoip: irq.c needs linux/interrupt.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off __{copy,clear}_user_page().Paul Mundt
Now that copy_to_user_page()/copy_from_user_page() are wired up, we can drop the old __copy_xxx() implementations. Now that the page colouring scheme has changed via kmap_coherent(), we can avoid the flush in these specific helpers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Optimized copy_{to,from}_user_page() for SH-4.Paul Mundt
This moves copy_{to,from}_user_page() out-of-line on SH-4 and converts for the kmap_coherent() API. Based on the MIPS implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Wire up clear_user_highpage().Paul Mundt
With the kmap_coherent() API in place, this is trivial to implement, and lets us avoid the cache flush in certain cases. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: kgdb sysrq depends on magic sysrq.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Add -Werror for clean directories.Paul Mundt
Follow the MIPS and sparc64 changes for -Werror instrumentation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Fix up kgdb build with modular sh-sci.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Export __{s,u}divsi3_i4i on all CPUs.Paul Mundt
Currently these are only being exported for CONFIG_CPU_SH4. This invariably breaks when building for an SH-3 that includes multiple targets in multilib. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Fix up kgdb-on-NMI branch target.Paul Mundt
This was all reworked some time ago, the old debug_enter was ripped out with everything going through a debug trap jump table instead. Kill off the debug_enter target and reference kgdb_handle_exception directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: ubc wakeup for SH-4 only.Paul Mundt
SH-4A parts generally don't have any use for this, and it requires an alternate implementation anyways. Leave this as an SH-4 only option, as that's the only place this has been needed in the past. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Fix compression method when making uImage.Nobuhiro Iwamatsu
When uImage is made by using 'make uImage', zImage is used. If zImage is used, the compression method need not be set. However, it is set for "gzip" for a compression method. I corrected to set "none". Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off duplicate includes.Paul Mundt
Caught by the surprisingly not-entirely-useless 'includecheck'. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Add SH7705 and other to the support of Solution Engine.Nobuhiro Iwamatsu
This patch supports Hitachi Solution Engine (SuperH) of SH7705, SH7710, SH7712, SH7750S and SH7750R. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-06[IA64] Clean up /proc/interrupts outputKenji Kaneshige
Clean up /proc/interrupts output on the system that has 10 or more CPUs. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] Disable/re-enable CPE interrupts on AltixRuss Anderson
When the CPE handler encounters too many CPEs (such as a solid single bit memory error), it sets up a polling timer and disables the CPE interrupt (to avoid excessive overhead logging the stream of single bit errors). disable_irq_nosync() calls chip->disable() to provide a chipset specifiec interface for disabling the interrupt. This patch adds the Altix specific support to disable and re-enable the CPE interrupt. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] Clean-up McKinley Errata messageRuss Anderson
No need to print "McKinley Errata 9 workaround not needed; disabling it" on every non-McKinley Itanium, which at this point is almost all of them. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] Add gate.lds to list of files ignored by GitPeter Chubb
If you build the kernel `in-place' then do a git update, git complains about arch/ia64/kernel/gate.lds being modified and untracked. Add that (generated) file to a .gitignore file. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] Fix section mismatch in contig.c version of per_cpu_init()Tony Luck
There is a section mismatch when building CONFIG_FLATMEM=y kernels that also have CONFIG_HOTPLUG_CPU=y WARNING: vmlinux.o(.text+0x5a902): Section mismatch: reference to \ .init.text:__alloc_bootmem (between 'per_cpu_init' and 'count_pages') The issue occurs because per_cpu_init() in mm/contig.c is marked __cpuinit (which is #define'd to nothing on a hot plug cpu configuration) call __alloc_bootmem() (which is an __init function). The usage is actually safe because the __alloc_bootmem() is inside an "if (first_time)" test so that the call is only made while it is still legal to do so. But the warning is irritating. Move the allocation to find_memory(). Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06UML: fix defconfig build againJeff Dike
Reported by Al Viro. This fixes it: [AC]FLAGS -> KBUILD_[AC]FLAGS conversion in Makefile-i386. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-06[IA64] Wrong args to memset in efi_gettimeofday()Li Zefan
Not sizeof(ptr) ... we meant to say sizeof(*ptr). Also moved the memset to the error path (the normal path overwrites every field in the structure anyway) -Tony Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] Remove duplicate includes from ia32priv.hLucas Woods
Don't need asm/processor.h twice Signed-off-by: Lucas Woods <woodzy@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] fix number of bytes zeroed by sys_fw_init() in ↵Roel Kluin
arch/ia64/hp/sim/boot/fw-emu.c The sizeof a pointer is constant, we want the sizeof what is pointed to. Zero out 'sizeof(*efi_systab)' bytes of the efi_system_table_t pointer 'efi_systab' instead. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] Fix perfmon sysctl directory modesTony Luck
New sanity checks in sysctl_check_table() complain about a couple of mode 0755 that should be 0555 in the perfmon code: sysctl table check failed: /kernel .1 Writable sysctl directory sysctl table check failed: /kernel/perfmon Writable sysctl directory Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-05uml: correctly strip kernel defines from userspace CFLAGSJeff Dike
KERNEL_DEFINES needs whitespace trimmed, otherwise the whitespace crunching done by make fools the patsubst which is used to remove KERNEL_DEFINES from USER_CFLAGS. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05uml: fix incompatible types warning in previous SG fixWANG Cong
Fix an incompatible-pointer warning. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05[ARM] 4633/1: omap build fix when FB enabledDavid Brownell
This fixes a section error on OMAP when the framebuffer is enabled. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-05Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] tod clock: announce clocksource as perfect [S390] Rename "idle_time" attribute to "idle_time_us". [S390] Fix priority mistakes in drivers/s390/cio/cmf.c [S390] Fix memory detection. [S390] Fix compile on !CONFIG_SMP. [S390] device_schedule_callback() for dcssblk. [S390] Fix smsgiucv init on no iucv machines [S390] cio: use INIT_WORK to initialize struct work.
2007-11-05Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: tidy up documentation kernel/futex.c: make 3 functions static unexport access_process_vm lguest: make async_hcall() static
2007-11-05[ARM] 4641/2: netX: fix kobject_name typeRobert Schwebel
With commit 5984a2fc7e7c9ab118e78ae9799e98fc4ade40f9 kobject_name() is correctly being used to access the name field of kobj, but that function needs a pointer to a kobject, not the kobject itself. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-05lguest: tidy up documentationRusty Russell
After Adrian Bunk's "make async_hcall static" moved things around, update comments to match (aka "make Guest"). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05lguest: make async_hcall() staticAdrian Bunk
async_hcall() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05[S390] tod clock: announce clocksource as perfectChristian Borntraeger
The Time of Day clock is the standard time source for s390. It is - monotonic - allows very fast reading - architecture guarantees at least microsecond stepping - available as part of the architecture We should announce the rate of tod as 400 to be in sync with the description found in clocksource.h: "400-499:Perfect The ideal clocksource. A must-use where available." This change will prefer tod over less reliable clock sources. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Rename "idle_time" attribute to "idle_time_us".Heiko Carstens
Seems that people prefer to have the unit encoded in the attribute name. Also makes parsing easier. Now we have: # cat /sys/devices/system/cpu/cpu0/idle_time_us 131473592 instead of # cat /sys/devices/system/cpu/cpu0/idle_time 131473592 us Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Fix memory detection.Heiko Carstens
Yet another patch in the countless series of memory detection fixes: if the last area of the reported storage size is a hole the detection loop will loop forever. Just break chunk detection loop if its end is going to be larger than reported storage size. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Fix compile on !CONFIG_SMP.Heiko Carstens
Commit fae8b22d3e3e3a3d317a7746493997af02a3f35c "[S390] Add per-cpu idle time / idle count sysfs attributes" causes a link error on !CONFIG_SMP. Fix this by adding some #ifdef's. Real fix would be to cleanup the code since we don't register a cpu on !CONFIG_SMP. But that would be quite a big patch. For the time being this is good enough. arch/s390/kernel/built-in.o: In function `do_monitor_call': (.text+0x50d4): undefined reference to `per_cpu__s390_idle' arch/s390/kernel/built-in.o: In function `cpu_idle': (.text+0x518c): undefined reference to `per_cpu__s390_idle' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 03:16:38 +0000