aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-09-16Blackfin: punt dead cache locking codeMike Frysinger
No one uses these functions, and some are duplicate of existing C code. So just punt the whole thing. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: drop board resources for dead devices (pbx/ad9960)Mike Frysinger
These hardware devices are dead and the drivers never cleaned up/merged, so punt the useless board resource info. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: do not trace the exception handlerYi Li
Since the exception handler cannot cause exceptions, we cannot trace it without easily causing double faults and crashing the system. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix BF522/BF523 max VCO mixupMike Frysinger
The BF522 and BF523 had their real max VCO values swapped. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: SMP port does not yet support cpu frequency scalingGraf Yang
We have an item to get this fixed, but in the mean time, disable selection via Kconfig dependencies. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cleanup sync handling when enabling/disabling cplbsYi Li
The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper sync procedures as laid out in the Blackfin programming manual. So rather than audit/fix every call location, create helper functions that do the right things in order to safely update these MMRs. Then convert all call sites to use these new helper functions. While we're fixing the code, drop the workaround for anomaly 05000125 as that anomaly applies to old versions of silicon that we do not support. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf537-stamp: update ad1836 resourcesBarry Song
Update the ad1836 resources for the new ASoC driver. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: update anomaly listsYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf538-ezkit: add resources for parallel flashBarry Song
The board has some parallel flash hooked up to the async banks, so add appropriate physmap resources for it. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf548-ezkit: fix incorrect LCD size parametersStefan Pledl
I think we have to use the physical dimensions [mm] of the display for .width and .heigth in struct bfin_bf54xfb_mach_info bf54x_lq043_data which are copied to fbinfo->var.height/.width in bf54x-lq043fb.c. linux/fb.h describes this values as 'height/weight of picture in mm' Otherwise QT calcs the wrong dpi value and the displayed fonts are very small. Signed-off-by: Stefan Pledl <stefan.pledl@mesutronic.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cm-bf527/bf537-stamp: fix dm9000 resourcesBarry Song
The dm9000 driver expects two IORESOURCE_MEM to get at the device, so make sure we declare things properly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: drop unused MMR defines that only cause bad code to be writtenMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: convert boards to use platform data with smc91xMichael Hennerich
Latest smc91x driver allows you to specify settings in board resources rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf537-stamp: drop ATA interrupt probe workaroundBarry Song
The interrupt probe workaround doesn't work without hacks to common code, and the add-on card only needs a simple resistor to fix the problem, so drop the board-specific hack. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: improve double fault debug handlingGraf Yang
Since the hardware only provides reporting for the last exception handled, and the values are valid only when executing the exception handler, we need to save the context for reporting at a later point. While we do this for one exception, it doesn't work properly when handling a second one as the original exception is clobbered by the double fault. So when double fault debugging is enabled, create a dedicated shadow of these values and save/restore out of there. Now the crash report properly displays the first exception as well as the second one. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf533-stamp: fix typo in SPI frequency for ad1836 codecCliff Cai
One too many zeros means we run way faster than the codec can handle. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix MPU handling of invalid memory accessesGraf Yang
The protect_page() function was incorrectly setting up the hardware tables based on possible access capabilities rather than the actual requested values. This means we would grant more access to mmap-ed pages than we should have. Once we fix this, we need to tweak the signal generated by such accesses to aline ourselves with other ports. This allows the LTP mmap0{5,6,7} cases to run properly. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: clean up duplicate I2C device type definitionsJean Delvare
I2C_BOARD_INFO() already sets .type, no need to set it again. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf537-stamp: update AD714x resourcesBarry Song
Push the device table to the board resources as data interpretation can be changed on a per-board basis. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: do not try displaying the end of the stackSonic Zhang
The end of the stack may not be valid (and that could be OK), so do not attempt to parse it. If we do, we might use a bad pointer in kernel space which makes things panic(). Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf533-stamp: add resources for mmc_spi cardYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf538: add bfin_clear_PPI_STATUS() helperBarry Song
Add the bf538 version of bfin_clear_PPI_STATUS() to match all other ports. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix BF548 UART0 DMA IRQ translationStefan Pledl
The initial BF54x port included some defines to keep code simple across different processors, but it just ended up causing the UART0 DMA IRQs to be set to the UART1 channels. Signed-off-by: Stefan Pledl <stefan.pledl@mesutronic.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: catch hardware errors earlier during bootingRobin Getz
Allow hardware errors to be caught during early portions of booting, and leave something in the shadow console that people can use to debug their system with (to be printed out by the bootloader on next reset). This enables the hardare error interrupts in head.S, allowing us to find hardware errors when they happen (well, as much as you can with a hardware error) and prints out the trace if it is enabled. This will catch errors (like booting the wrong image on a 533) which previously resulted in a infinite loop/hang, as well as random hardware errors before before setup_arch(). To disable this debug only feature - turn off EARLY_PRINTK. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: add an early shadow consoleRobin Getz
Add a memory based shadow console to keep a copy of the printk buffer in a location which can be found externally. This allows bootloaders to locate and utilize the log buffer in case of silent (early/resume/etc...) crashes. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: add support for common FDPIC ptrace requestsMike Frysinger
The FDPIC arches support a standard set of ptrace requests so rather than define our own custom API, hook up those requests for common code to leverage. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: push SRAM locks down into related ifdefsMike Frysinger
Rather than defining the locks and initializing them all the time, only do so when we actually need them (i.e. the SRAM regions exist). This avoids dead data and code bloat during runtime. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: unify duplicated SMP checks in L2 cache kconfigSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: rename PCF8574 driver configMichael Hennerich
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the defines in the board resources accordingly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: clean up early memory setup codeRobin Getz
Remove code duplication, and only print out memory warnings when they are an actual problem. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix module reloc handling for all memory regionsMike Frysinger
The current module relocation code has spotty handling wrt different memory regions (like L1 instruction). Rather than try to fix each little spot, use the new common memory functions to greatly simplify everything and make sure it is always correct. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cleanup module section checkingMike Frysinger
The current module section handling code has a lot of verbose statements copied and pasted throughout which makes it pretty hard to digest at a glance. By unifying all of these up front, it is a lot easier to quickly get an idea of what is actually going on. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: convert malloc()/memset() to zalloc() in module codeMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cleanup printk() usage in module codeMike Frysinger
Convert all printk() statements to use the common pr_xxx() funcs and use the new pr_fmt() function to standardize all of the output. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: reject outdated/unused/wrong relocation typesRobin Getz
All kernel modules are required to be built with -mlong-calls and thus should not generate any of these relocations. If they do, it means the module has not been compiled properly, so rather than trying to handle them (and running into random run time errors) just error out on module load to force the module to be compiled correctly. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: convert ptrace to new memory functionsMike Frysinger
Now that we have a Blackfin memory function to figure out how to properly access the different regions, drop the custom memory range checks in our ptrace code and use that. It makes the code nicer and fixes bugs where the ptrace logic wasn't handling all the different regions. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cleanup traps decode_address() a bitMike Frysinger
Unify the address display to shrink the code, and add missing decoding of a few special Blackfin-specific regions (L1 ROM and MMRs). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: inline I-pipe bypass code in ret_from_exceptionPhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: sanitize manual control of IPEND[4]Philippe Gerum
Cleanup is performed in two ways: - remove extraneous updates of IPEND[4] w/ CONFIG_IPIPE, and document remaining use. - substitute pop-reg-from-stack instructions with plain SP fixups in all save-RETI-then-discard patterns. Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: document __ipipe_call_irqtailPhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: allow EVT5 to preempt irqtail prologue (CONFIG_DEBUG_HWERR)Philippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: reuse evt_evt14 handler to perform irqtail epiloguePhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: use generic name for EVT14 handlerPhilippe Gerum
The purpose of the EVT14 handler may depend on whether CONFIG_IPIPE is enabled, albeit its implementation can be the same in both cases. When the interrupt pipeline is enabled, EVT14 can be used to raise the core priority level for the running code; when CONFIG_IPIPE is off, EVT14 can be used to lower this level before running softirq handlers. Rename evt14_softirq to evt_evt14 to pick an identifier that fits both, which allows to reuse the same vector setup code as well. Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: allow high priority domains to preempt schedule_tail()Philippe Gerum
ret_from_fork is always entered with hw interrupts off, which prevents real-time domains to preempt the Linux kernel during part of the initial context switch to the new task, which could in turn raise the worst-case latency figures. To avoid this, stall the root domain stage in the interrupt pipeline to keep the scheduling tail code free from Linux-handled IRQs, then enable hardware interrupts again. Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: export show_stack() to modulesPhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix misnomer of some I-pipe helpersPhilippe Gerum
__ipipe_{stall, unstall}_root_raw() identifiers may leave the reader under the impression that only the virtual state is affected by these operations, which is wrong. Pick names following the convention used throughout the interrupt pipeline code. Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: checkpatch --file arch/blackfin/kernel/ipipe.cPhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4]Robin Getz
We handle many exceptions at EVT5 (hardware error level) so that we can catch exceptions in our exception handling code. Today - if the global interrupt enable bit (IPEND[4]) is set (interrupts disabled) our trap handling code goes into a infinite loop, since we need interrupts to be on to defer things to EVT5. Normal kernel code should not trigger this for any reason as IPEND[4] gets cleared early (when doing an interrupt context save) and the kernel stack there should be sane (or something much worse is happening in the system). But there have been a few times where this has happened, so this change makes sure we dump a proper crash message even when things have gone south. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf537-stamp: add resources for AD1938 audio cardBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 05:34:52 +0000