aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2006-01-06[PATCH] Alpha: convert to generic irq framework (alpha part)Ivan Kokshaysky
Kconfig tweaks and tons of deletions. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Christoph Hellwig <hch@lst.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] cpu hotplug/x86_64: disable interrupt in play_deadShaohua Li
With physical CPU hotplug, the CPU is hot removed and it should not receive any interrupts. Disabling interrupt is much safer. This basically is what we do in ia64 & x86. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] i386: Handle HP laptop rebooting properly.Ben Collins
Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] i386: ioapic virtual wire mode fixVivek Goyal
o Currently, during kexec reboot, IOAPIC is re-programmed back to virtual wire mode if there was an i8259 connected to it. This enables getting timer interrupts in second kernel in legacy mode. o After putting into virtual wire mode, IOAPIC delivers the i8259 interrupts to CPU0. This works well for kexec but not for kdump as we might crash on a different CPU and second kernel will not see timer interrupts. o This patch modifies the redirection table entry to deliver the timer interrupts to the cpu we are rebooting (instead of hardcoding to zero). This ensures that second kernel receives timer interrupts even on a non-boot cpu. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] fix cpu frequency detection in ↵Larry Finger
arch/i386/kernel/timers/timer_tsc.c::recalibrate_cpu_khz() When we re-calibrate the frequency, it is likely that an interrupt (as for example the main system clock) will be triggered by the system. Therefore the calibration may not be accurate. This will also provide a fix to bug #5266. Many thanks to Larry Finger for helping resolving this issue. Signed-off-by: Bruno Ducrot <ducrot@poupinou.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] APM Screen Blanking fixJordan Crouse
- Fix screen blanking on BIOSes that return APM_NOT_ENGAGED when APM enabled screen blanking is not turned on. The original code only tried to set the state on device 0x100, and then 0x1FF, and I added 0x101 to the mix too. - Clean up logic in apm_console_blank(). - Prevent the error message from printing out twice. Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] Base support for AMD Geode GX/LX processorsJordan Crouse
Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] arch/i386/kernel/cpuid.c: unused variableDaniel Marjamaki
Removed the unused variable "rv". Signed-off-by: Daniel Marjamaki <daniel.marjamaki@comhem.se> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] arch/i386/kernel/msr.c: removed unused variableDaniel Marjamaki
Removed the unused variable "rv". Signed-off-by: Daniel Marjamaki <daniel.marjamaki@comhem.se> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: missing printk newline in apic boot option parserDave Jones
Missing newline in printk. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: change_page_attr() fixDave Jones
The 'make rodata read-only' patch in -mm exposes a latent bug in the 32-bit change_page_attr() function, which causes certain CPUs (Those with NX basically) to reboot instantly after pages are marked read-only. The same bug got fixed a while back on x86-64, but never got propagated to i386. Stuart Hayes from Dell also picked up on this last June, but it never got fixed, as the only thing affected by it aparently was the nvidia driver. Blatantly stealing description from his post.. "It doesn't appear to be fixed (in the i386 arch). The change_page_attr()/split_large_page() code will still still set all the 4K PTEs to PAGE_KERNEL (setting the _PAGE_NX bit) when a large page needs to be split. This wouldn't be a problem for the bulk of the kernel memory, but there are pages in the lower 4MB of memory that's free, and are part of large executable pages that also contain kernel code. If change_page_attr() is called on these, it will set the _PAGE_NX bit on the whole 2MB region that was covered by the large page, causing a large chunk of kernel code to be non-executable." Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Dave Jones <davej@redhat.com> Cc: <Stuart_Hayes@Dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] make bigsmp the default mode if CONFIG_HOTPLUG_CPUAshok Raj
If we are using hotplug enabled kernel, then make bigsmp the default mode. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] i386 sparsemem for single node systemsAndy Whitcroft
Allow SPARSEMEM to be enabled on non-numa x86 systems. This is made dependant on EXPERIMENTAL also being set. When an in-tree user (such as simulated numa) exists it should be made dependant on that. The plan is to have no options and no selector as normal when !EXPERIMENTAL. When EXPERIMENTAL we enable the FLATMEM and SPARSEMEM options for X86_PC whilst maintaining DISCONTIGMEM and SPARSEMEM for NUMA. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86/x86_64: mark rodata section read-only: make some datastructures ↵Arjan van de Ven
const Mark some key kernel datastructures readonly. This patch was previously posted on Jun 28th but was back then not merged because nothing was enforcing rodata anyway.. well that changed now :) Patch by Christoph Lameter <christoph@lameter.com> and Dave Jones <davej@redhat.com> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86/x86_64: mark rodata section read-only: x86-64 supportArjan van de Ven
x86-64 specific parts to make the .rodata section read only Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86/x86_64: mark rodata section read only: generic x86-64 bugfixArjan van de Ven
Bug fix required for the .rodata work on x86-64: when change_page_attr() and friends need to break up a 2Mb page into 4Kb pages, it always set the NX bit on the PMD, which causes the cpu to consider the entire 2Mb region to be NX regardless of the actual PTE perms. This is fine in general, with one big exception: the 2Mb page that covers the last part of the kernel .text! The fix is to not invent a new permission for the new PMD entry, but to just inherit the existing one minus the PSE bit. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86/x86_64: mark rodata section read only: x86 partsArjan van de Ven
x86 specific parts to make the .rodata section read only Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Deprecate useless bugZachary Amsden
Remove the "temporary debugging check" which has managed to live for quite some time, and is clearly unneeded. The mm can never be live at this point, so clearly checking the LDT in the mm->context is redundant as well. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Apm is on cpu zero onlyZachary Amsden
APM BIOS code has a protective wrapper that runs it only on CPU zero. Thus, no need to set APM BIOS segments in the GDT for other CPUs. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Stop deleting ntZachary Amsden
Stop deleting NT bit from EFLAGS. See arch/i386/kernel/head.S line 223, which does something even better. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Fixed pnp bios limitsZachary Amsden
PnP BIOS data, code, and 32-bit entry segments all have fixed limits as well; set them in the GDT rather than adding more code. It would be nice to add these fixups to the boot GDT rather than setting the GDT for each CPU; perhaps I can wiggle this in later, but getting it in before the subsys init looks tricky. Also, make some progress on deprecating the ugly Q_SET_SEL macros. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Pnp byte granularityZachary Amsden
The one remaining caller of set_limit, the PnP BIOS code, calls into the PnP BIOS, passing kernel parameters in and out. These parameteres may be passed from arbitrary kernel virtual memory, so they deserve strict protection to stop a bad BIOS from smashing beyond the object size. Unfortunately, the use of set_limit was badly botching this by setting the limit in terms of pages, when it really should have byte granularity. When doing this, I discovered my BIOS had the buggy code during the "get system device node" call: mov ax, es:[bx] Which is harmless, but has a trivial workaround. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Apm seg in gdtZachary Amsden
Since APM BIOS segment limits are now fixed, set them in head.S GDT and don't use the complicated _set_limit() macro expansion. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Always relax segmentsZachary Amsden
APM BIOSes have many bugs regarding proper representation of the appropriate segment limits for calling the BIOS. By default, APM_RELAX_SEGMENTS is always turned on to support running the APM BIOS on these buggy machines. Keeping 64k limits poses very little danger to the kernel, because the pages where the APM BIOS is located will always be in low physical memory BIOS areas, which should already be marked reserved, and only buggy BIOSes would possibly overstep the segment bounds with writes to data anyway. Since forcing stricter limits breaks many machines and is not default behavior, it seems reasonable to deprecate the older code which may cause APM BIOS to fault. If you really have a badly enough broken APM BIOS that you have to turn off APM_RELAX_SEGMENTS, seems like the best recourse here would be to disable the APM BIOS and / or not compile it into your kernel to begin with, and / or add your system to the known bad list. The reason I want to deprecate this code is there is underlying brokenness with the set_limit macros, and getting rid of many of the call sites rather than rewriting them seems to be the simplest and most correct course of action. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: Cr4 is valid on some 486sZachary Amsden
So some 486 processors do have CR4 register. Allow them to present it in register dumps by using the old fault technique rather than testing processor family. Thanks to Maciej for noticing this. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] i386: fix bound check IDT gateJan Beulich
Other than apparently commonly assumed, the bound instruction does not require the corresponding IDT entry to have DPL 3. Acked-by: "Seth, Rohit" <rohit.seth@intel.com> Acked-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] i386: move SIMD initializationJan Beulich
Move some code unrelated to any dealing with hardware bugs from i386's bugs.h to a more logical place. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] i386: don't blindly enable interrupts in die()Jan Beulich
Rather than blindly re-enabling interrupts in die(), save their state upon entry and then restore that state. If the kernel is in really bad condition and faults with interrupts disabled, re-enabling them in die() may cause even more trouble, implying more chances of data corruption. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: GDT alignment fixZachary Amsden
Make GDT page aligned and page padded to support running inside of a hypervisor. This prevents false sharing of the GDT page with other hot data, which is not allowed in Xen, and causes performance problems in VMware. Rather than go back to the old method of statically allocating the GDT (which wastes unneded space for non-present CPUs), the GDT for APs is allocated dynamically. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] frv: improve signal handlingDavid Howells
The attached patch improves the signal handling: (1) It makes do_signal() static as it isn't called from anywhere outside of the arch code. (2) It removes the regs argument to all the static functions within that file, using __frame instead (which is the same thing held in a global register). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] frv: fix signal handlingDavid Howells
The attached patch makes FRV signal handling work properly: (1) After do_notify_resume() has been called, the work flags must be checked again (there may be another signal to deliver or the process might require rescheduling for instance). (2) After the signal frame is set up on the userspace stack, ptrace() should be given an opportunity to single-step into the signal handler. (3) The error state from setting up a signal frame should be passed back up the call chain. (4) The segfault handler shouldn't be preemptively reset in the arch if we fail to deliver a SEGV signal: force_sig() will take care of that. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] FRV: Implement futex operations for FRVDavid Howells
The attached patch implements futex operations for the FRV architecture. The operations are applicable to both MMU and no-MMU modes; though the EFAULT handling will be a little bit of wasted space on the latter. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Re-add embed_config.c to ml300/ep405Peter Korsgaard
Commit 3e9e7c1d0b7a36fb8affb973a054c5098e27baa8 (ppc32: cleanup AMCC PPC40x eval boards to support U-Boot) broke the kernel for ML300 / EP405. It still compiles as there's a weak definition of the function in misc-embedded.c, but the kernel crashes as the bd_t fixup isn't performed. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Allows compilation of a MPC52xx kernel without PCISylvain Munaut
Some custom cards might not need PCI, without this patch, compilation fails. Signed-off-by: Roger Blofeld <blofeldus@yahoo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Fix MPC52xx PCI init in cas the bootloader didn't do itSylvain Munaut
We were counting on the bootloader to init some stuff, like get the bus out of reset and enable accesses. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Fix MPC52xx configuration space accessSylvain Munaut
This patch takes care of an errata of the MPC5200 by avoiding 32 bits access in type 1 configuration accesses. All others accesses are still 32 bits wide. It also adds some mb() since the simple out_be(...) are not sufficient in this case. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Remove __init qualifier from mpc52xx pci resources fixupsSylvain Munaut
The mpc52xx_pci_fixup_resources is not only called at init but also when there is a pci hotplug like when a cardbus card is plugged in. So that function is needed after init too. Thanks to Asier Llano Palacios for reporting this. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Fix static IO mapping for Freescale MPC52xxSylvain Munaut
The current iomapping used MBAR_SIZE for the size argument of io_block_mapping, resulting in a call to setbat with a size argument of 64k which is invalid. This patch correct this and maps the whole 0xf0000000->0xffffffff range so that devices on the local bus are also included in the BAT mapping. Thanks to Bernhard Kuhn from Metrowerks for pointing this out. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Remove useless file arch/ppc/platforms/mpc5200.cSylvain Munaut
That file is a left-over of the 'old' OCP model that should have been erased during the change to platform model but I forgot it ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] arch/ppc/kernel/idle.c: don't declare cpu variable in non-SMP kernelsOtavio Salvador
Disable declaration of cpu variable in default_idle function when building non-SMP kernels. Signed-off-by: Otavio Salvador <otavio@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: remove "jumbo" member from ocp_func_emac_dataEugene Surovegin
Remove the not needed anymore "jumbo" member from ocp_func_emac_data. Jumbo frame support is handled by PPC4xx EMAC driver internally now. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-05[PATCH] i386: PTRACE_POKEUSR: allow changing RF bit in EFLAGS register.Chuck Ebbert
Setting RF (resume flag) allows a debugger to resume execution after a code breakpoint without tripping the breakpoint again. It is reset by the CPU after execution of one instruction. Requested by Stephane Eranian: "I am trying to the user HW debug registers on i386 and I am running into a problem with ptrace() not allowing access to EFLAGS_RF for POKEUSER (see FLAG_MASK). [ ... ] It avoids the need to remove the breakpoint, single step, and reinstall. The equivalent functionality exists on IA-64 and is allowed by ptrace()" Cc: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-05[IA64] Fix compile warnings in setup.cTony Luck
arch/ia64/kernel/setup.c: In function `show_cpuinfo': arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 12) arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 13) Introduced by 95235ca2c20ac0b31a8eb39e2d599bcc3e9c9a10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-05Auto-update from upstreamTony Luck
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04[PATCH] i386: "invalid operand" -> "invalid opcode"Chuck Ebbert
According to the manual, INT 6 is "invalid opcode", not "invalid operand". Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
2006-01-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds