| Age | Commit message (Collapse) | Author |
|---|
|
After suspending with GPS powered on power_on sysfs node reports 0 and GPS
is actually unpowered but "echo 1 > power_on" has no effect. This patch
fixes it.
Reported and analised by Timo Juhani Lindfors <timo.lindfors@iki.fi>,
ticket #2293.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
This option is meant for debugging and is not any more of interest to
ordinary users.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
Enabling wakelocks leads to immediate suspend after resume. See
ce6840da7184043a09dd57d4c201a32ef7b6c083 for clarifications.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
Without this jbt6k74 is not seen by the system and consequently
display doesn't work with Qi.
Rebasing to .28 introduced a regression (probably in
a6af63e826b79ae1ba2d8cbfa66805cc2dfe367c) resulting in jbt6k74 no longer
manageable by the kernel. This was unnoticed before because u-boot does its
own LCM initialization. With Qi it resulted in a white screen.
This patch is fixing it by making spi host bus number (unspecified,
defaults to 0) and spi device (jbt6k74) bus number match.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Machines that do not route the USB vbus signal to a GPIO can use this
mechanism as an alternate way for the udc driver to detect the usb
connect/disconnect state, which is useful (for example) to enable the
link up/down state to be determined for the g_ether gadget.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Distributions that use Xorg will not need the workaround at
all and now they can disable it.
Updated configurations to enable it by default.
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
|
|
Disable EXT4 in gta02_moredrivers_defconfig.
Enable reiserfs3 in gta02_moredrivers_defconfig and gta02_packaging_defconfig.
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
Reported-by: W.Kenworthy <billk@iinet.net.au>
|
|
Removes ext4 support from the packaging defconfig; there is little
value in having this built into the kernel, and a bug in the current
2.6.29-rc3 kernel results in the kernel attempting to mount an ext2
rootfs as ext4, which fails.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
This reverts commit 962780e3631255fc5423192d0762f30a1fa45239.
Nothing really wrong with it but the resulting kernel was
too big for the GTA01 NAND flash.
GTA01 boots.
|
|
If brightness value was set to anything less than 12, the backlight wasn't
re-enabled after unblanking the display. Closes ticket #2262.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
|
|
this affects gta01 and gta02, now we can enable both in the .config
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
|
|
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
|
|
Not sure what is the correct naming scheme and if MODULE_ALIAS in
drivers/usb/host/ohci-s3c2410.c is needed at all (if yes, probably it
should be modified too).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
|
|
An S3C2442B would be detected as S3C2440 by the cpu_is_s3cxxxx()
macros. This patch fixes it.
Signed-off-by: Rask Ingeman Lambertsen <rask@sygehus.dk>
|
|
Signed-off-by: Tim Niemeyer <reddog@mastersword.de>
|
|
added bus link from neo1973-pm-gps.0 to gta01-pm-gps.0
added pwron attr wich is the same as power_on
also one typo fixed (3V instead of 3V3 in gps_power_3v_set)
[ Werner: Documentation/CodingStyle line 83, don't ignore the error if
sysfs_create_group fails. ]
Signed-off-by: Tim Niemeyer <reddog@mastersword.de>
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Change RTS and TXD pins on UART 0 to be inputs only on GTA02.
On GTA01 the UART 0 maybe used otherwise.
[ Werner: removed unexplained addition of DEBUG, Documentation/CodingStyle
lines 105, 224, and 448. ]
Signed-off-by: Tim Niemeyer <reddog@mastersword.de>
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Signed-off-by: Tim Niemeyer <reddog@mastersword.de>
|
|
Hello,
this patch adds "force-shutdown" feature for GTA02. When the power button is
held pressed for 8 seconds, the power is turned off. No need to remove the
battery anymore. Patch is against andy-tracking.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@gmail.com>
|
|
Add to_irq method to convert gpio to irq
for external interrupt group (GPN).
Signed-off-by: Matt Hsu <matt_hsu@openmoko.org>
|
|
This patch adds the real "camif" clock (off HCLK.)
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Identifiers related to the "camera" clock were mis-named as camif.
This patch renames them.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
This dirty hack adds camera activation/deactivation on open/close.
This code will have to move to a machine/platform area later. The
general driver is the wrong place for it.
It also removes the unconditional activation and moves the domain
setting to the rest of the power control code. (Thanks, Andy !)
Note that opening the camera now always takes about 20 seconds
until the settings are downloaded, not just on the first open.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Filter chains should be completely opaque to the drivers that use it.
We fix this with this patch.
~ Make the "filter chain" a new object.
~ We can build with CONFIG_TOUCHSCREEN_FILTER=n with no problems in
a cleaner way.
~ Update s3c2410_ts.c to use the filter_chain object.
~ Cleanups.
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
|
|
~ Make a few symbols constant.
~ Export symbols explicitly.
~ Move ts_filter.c to ts_filter_chain.c (this will make sense later).
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
|
|
This patch defines a ts_filter_configuration structure to
avoid using void* in the filter initialization, fixing another
upstream correction. This also makes the initialization more readable.
Tested in GTA02/rev6.
Other changes:
~ Comment filter configuration structures.
~ ts_filter.c:ts_filter_chain_create improved.
~ Small cleanups.
~ More TODOs/FIXMEs.
~ Updated GTA02 filter configuration.
~ Updated GTA01 filter configuration.
~ Updated mach-s3c2410/include/mach/ts.h for the new ts. configuration
structure.
~ Updated all the filters to use the new configuration structure.
~ Removed MAX_TS_FILTER_CHAIN constant that is no longer needed.
No more evil casts left it seems.
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
|
|
This patch turns upstream feedback into API modifications and code
improvements. There will be more patches implementing upstream
corrections but this one is the that will make most of the invasive
changes and make the most important improvements to the API.
Tested in a GTA02/rev06.
The goals of this patch are:
* Replace recursive calls with iteration.
* General code improvements.
* Make ts_filter_mean.c a reference for the rest of the filters.
* Make the (almost)minimum number of changes to the other filters so
that they compile and work, patches for cleaning these up will
come next.
* Filters should do what they were doing before.
Some important changes:
* Move "struct ts_filter tsf" in the private structures to force
a crash (or break things) if we forget to remove an open-coded cast.
* ts_filter.c/ts_filter.h
~ API modifications.
* s3c2410_ts.c:
~ Use the new API.
~ Cleanups.
* ts_filter_mean.c
~ Replace with a simple mean.
~ Use as a reference for the new API.
~ Move private structure from the .h to the .c.
* ts_filter_group.c
~ Update to use the new API.
* ts_filter_median.c
~ Update to use the new API.
* ts_filter_linear.c
~ Remove functions that are no longer needed.
Note:
I might leave some TODOs and FIXMEs with this patch. Most of them
will be removed shortly.
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This lets us turn off CONFIG_S3C_DEV_CAMIF and suppress it
turning on power (still seemed to issue clock though).
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
s3c64xx_setrate_clksrc used the clock selection shift sclk->shift instead
of the divider shift sclk->divider_shift, causing clocks to be clobbered.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
s3c64xx_roundrate_clksrc got the rate vs. parent order wrong.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
[ Resending it. Seems that commit 9e723603e46500e2c9fbf09ac823de210bf05d31
used one of the empty mails I got with formail :-( ]
Add camera interface clock to S3C6410.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
The current version of CPU detection patch from Mark Brown and
Kyungmin Park takes a dump on system_rev. This patch changes it
to retain the low 16 of system_rev from the bootloader ATAG, and
adds access #defines and changes to use them.
No doubt they'll issue a better version of the CPU detection
patch and then this can be reverted.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Use the regulator framework to provide optional support for DVFS in
the S3C64XX cpufreq driver. When a software controllable regulator
is configured the driver will use it to lower the supply voltage when
running at a lower frequency, giving improved power saving.
When regulator support is disabled or no regulator can be obtained
for VDDARM the driver will fall back to scaling only the frequency.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
This patch provides initial support for CPU frequency scaling on the
Samsung S3C64XX series processors. Currently only S3C6410 processors
are supported, though addition of another data table with supported
clock rates should be sufficient to enable support for further CPUs.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Add support for reconfiguring the clock for the ARM core, enabling
CPUfreq support. Currently only the divider for ARMCLK may be changed,
ARMPLL is left static.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Stroe the CPU ID to system_rev and use it to detect the CPU architecture.
Even though s3c64xx has almost same IPs, some IPs such as OneNAND are different.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
X-Git-Url: http://git.openmoko.org/?p=kernel.git;a=commitdiff_plain;h=d9235e3a8bdcef02865eed27c0d6012d253f11e7
om3d7k: Add support for s3c_ohci device.
Adds s3c_ohci support to om3d7k.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
|
|
X-Git-Url: http://git.openmoko.org/?p=kernel.git;a=commitdiff_plain;h=b55b8e56a4a7e43b7243be48f77a326236a37c68
USB: Change s3c2410_ohci into s3c_ohci and change gta02 to use it
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
|
|
Give the regulator supplies names corresponding to the names their
supplies are given in the schematic, making it easier to tie the
software up with the schematic.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Matt Hsu <matt_hsu@openmoko.org>
|
