aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-02-08pxa/h5000: Setup I2S pins for pxa2xx-i2sPhilipp Zabel
The iPAQ h5000 has an AK4535 codec connected as I2S slave, PXA I2S providing SYSCLK. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-19ASoC: machine support for Toshiba e740 PDAIan Molton
This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-16ASoC: machine driver for Toshiba e800Ian Molton
This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-16ASoC: machine driver for Toshiba e750Ian Molton
This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-12Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sparc64: Fix cpumask related build failure smp_call_function_single(): be slightly less stupid, fix smp_call_function_single(): be slightly less stupid rcu: fix bug in rcutorture system-shutdown code
2009-01-12Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (37 commits) MIPS: Only write c0_framemask on CPUs which have this register. MIPS: Alchemy: new userspace suspend interface for development boards. MIPS: Alchemy: dbdma suspend/resume support. MIPS: Alchemy: Fix up PM code on Au1550/Au1200 MIPS: Alchemy: move calc_clock function. MIPS: Alchemy: RTC counter clocksource / clockevent support. MIPS: make cp0 counter clocksource/event usable as fallback. MIPS: Alchemy: remove cpu_table. MIPS: Alchemy: remove get/set_au1x00_lcd_clock(). MIPS: Print irq handler description MIPS: Alchemy: pb1200: update CPLD cascade irq handler. MIPS: Alchemy: update core interrupt code. MIPS: Alchemy: move commandline mangling out of common code MIPS: Alchemy: devboards: consolidate files MIPS: Alchemy: Move development board code to common subdirectory MIPS: Add Cavium OCTEON to arch/mips/Kconfig MIPS: Add defconfig for Cavium OCTEON. MIPS: Adjust the dma-common.c platform hooks. MIPS: Add Cavium OCTEON slot into proper tlb category. MIPS: Compute branch returns for Cavium OCTEON specific branch instructions. ...
2009-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Fix asm/signal.h for 32-bit. sparc: Eliminate PROMLIB_INTERNAL as it does nothing sparc: Kill exports of prom internal functions sparc64: move EXPORT_SYMBOL to the symbols definition sparc: move EXPORT_SYMBOL to the symbols definition sparc: Create a new file lib/ksyms.c and add export of all symbols defined in assembler in lib/ to this file. sparc: Most unaligned_64.c tweaks for branch tracer warnings. sparc: Fix sun4d_irq.c build. sparc: Update 32-bit defconfig. sparc64: fix warnings in psycho_common after ull conversion
2009-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Pika Warp appliance watchdog timer [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610 [WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer [WATCHDOG] wm8350: Fix section annotations
2009-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (30 commits) m68k: Fix --build-id breakage for sun3 m68k: Wire up sys_restart_syscall fbdev: Kill Atari vblank cursor blinking m68k: zorro - Use %pR to print resources m68k: dio - Kill resource_size_t format warnings m68k: dmasound - Kill warn_unused_result warnings m68k: zorro - Kill warn_unused_result warnings m68k: dio - Kill warn_unused_result warnings m68k: atafb - Kill warn_unused_result warnings m68k: amiserial - Kill warn_unused_result warnings m68k: ser_a2232 - Kill warn_unused_result warnings m68k: vme_scc - Kill warn_unused_result warnings m68k: sun3 core - Kill warn_unused_result warnings m68k: mvme147 core - Kill warn_unused_result warnings m68k: mac core - Kill warn_unused_result warnings m68k: hp300 core - Kill warn_unused_result warnings m68k: atari core - Kill warn_unused_result warnings m68k: apollo core - Kill warn_unused_result warnings m68k: amiga core - Kill warn_unused_result warnings m68k: Kill several external declarations in source files ...
2009-01-12Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write" x86: fix apic.c build error on latest git x86: fix mpparse.c build error on latest git x86: avoid theoretical vmalloc fault loop x86, mtrr: fix types used in userspace exported header
2009-01-12[WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610Martyn Welch
Support for the FPGA based watchdog timer on GE Fanuc's SBC610. This patch enables one of the watchdog timers found on the SBC610. There are two identical watchdog timers at different offsets in the above mentioned boards, however the current driver is only capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12m68k: Fix --build-id breakage for sun3Al Viro
Counterpart of commit 08a3db94f2a36c28278922732bc281c1722ceb18 ("m68k: Add NOTES to init data so its discarded at boot") for sun3 build. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: Wire up sys_restart_syscallAndreas Schwab
Make restart blocks working, required for proper syscall restarting. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: sun3 core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: mvme147 core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: mac core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: hp300 core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: atari core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: apollo core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: amiga core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: Kill several external declarations in source filesGeert Uytterhoeven
- Replace external declarations by proper includes where availiable. The accesses to some symbols had to be modified, as before they were declared using e.g. "extern int _end", while asm-generic/sections.h uses e.g. "extern char _end[]" - Remove unused or superfluous external declarations Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: Add vmlinux.lds to .gitignoreKars de Jong
arch/m68k/kernel/.gitignore: Added vmlinux.lds to .gitignore file because it shouldn't be tracked. Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write"Ingo Molnar
This reverts commit 7503bfbae89eba07b46441a5d1594647f6b8ab7d. Dieter Ries reported bootup soft-hangs and bisected it back to this commit, and reverting this commit gave him a working system. The commit introduces work_on_cpu() use into the cpufreq code, but that is subtly problematic from a lock hierarchy POV: the hotplug-cpu lock is an highlevel lock that is taken before lowlevel locks, and in this codepath we are called with the policy lock taken. Dieter did not have lockdep enabled so we dont have a nice stack trace proof for this, but using work_on_cpu() in such a lowlevel place certainly looks wrong, so we revert the patch. work_on_cpu() needs to be reworked to be more generally usable. Reported-by: Dieter Ries <clip2@gmx.de> Tested-by: Dieter Ries <clip2@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12x86: fix apic.c build error on latest gitJaswinder Singh Rajput
Fix this by reintroducing asm/smp.h include in apic.c - later on I will fix this by removing non-smp data from smp.h Also fix the __inquire_remote_apic() prototype/inline. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12x86: fix mpparse.c build error on latest gitJaswinder Singh Rajput
Fix this by reintroducing asm/smp.h include in mpparse.c - later on I will fix this by removing non-smp data from smp.h. Reported-by: Petr Titera <P.Titera@century.cz> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12x86: avoid theoretical vmalloc fault loopAndi Kleen
Ajith Kumar noticed: I was going through the vmalloc fault handling for x86_64 and am unclear about the following lines in the vmalloc_fault() function. pgd = pgd_offset(current->mm ?: &init_mm, address); pgd_ref = pgd_offset_k(address); Here the intention is to get the pgd corresponding to the current process and sync it up with the pgd in init_mm(obtained from pgd_offset_k). However, for kernel threads current->mm is NULL and hence pgd = pgd_offset(init_mm, address) = pgd_ref which means the fault handler returns without setting the pgd entry in the MM structure in the context of which the kernel thread has faulted. This could lead to never-ending faults and busy looping of kernel threads like pdflush. So, shouldn't the pgd = pgd_offset(current->mm ?: &init_mm, address); be pgd = pgd_offset(current->active_mm ?: &init_mm, address); We can use active_mm unconditionally because it should be always set. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11powerpc: Fix cpufreq drivers after cpufreq core changesBenjamin Herrenschmidt
This updates the cpufreq drivers in arch/powerpc so they build again after the core cpufreq changes that broke them in commit in835481d9bcd65720b473db6b38746a74a3964218. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-11sparc64: Fix cpumask related build failureDavid Miller
cpumask_of_pcibus() was missing - this triggers on NUMA builds. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11MIPS: Only write c0_framemask on CPUs which have this register.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: new userspace suspend interface for development boards.Manuel Lauss
Replace the current sysctl-based suspend interface with a new sysfs- based one which also uses the Linux-2.6 suspend model. To configure wakeup sources, a subtree for the demoboards is created under /sys/power/db1x: sys/ `-- power `-- db1x |-- gpio0 |-- gpio1 |-- gpio2 |-- gpio3 |-- gpio4 |-- gpio5 |-- gpio6 |-- gpio7 |-- timer |-- timer_timeout |-- wakemsk `-- wakesrc The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2 bits of the SYS_WAKEMSK (wakeup source enable) register. Writing '1' enables a wakesource, 0 disables it. The 'timer_timeout' node holds the timeout in seconds after which the TOYMATCH2 event should wake the system. The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex), the 'wakemsk' node can be used to get/set the wakeup mask directly. For example, to have the timer wake the system after 10 seconds of sleep, the following must be done in userspace: echo 10 > /sys/power/db1x/timer_timeout echo 1 > /sys/power/db1x/timer echo mem > /sys/power/sleep This patch also removes the homebrew CPU frequency switching code. I don't understand how it could have ever worked reliably; it does not communicate the clock changes to peripheral devices other than uarts. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/alchemy/devboards/pm.c
2009-01-11MIPS: Alchemy: dbdma suspend/resume support.Manuel Lauss
Implement suspend/resume for DBDMA controller and its channels. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: Fix up PM code on Au1550/Au1200Manuel Lauss
Au1550/Au1200 have a different memory controller which requires additi- onal code to properly put memory to sleep (code taken from AMD/RMI's Linux-2.6.11 source package). Also fix up the remaining pm-related paths to compile on Au1200/Au1550 platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: move calc_clock function.Manuel Lauss
Now that nothing in time.c depends on calc_clock, it can be moved to clocks.c where it belongs. While at it, give it a better non-generic name and call it as soon as possible in plat_mem_init. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: RTC counter clocksource / clockevent support.Manuel Lauss
Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent device. As a nice side effect, this also enables use of the 'wait' instruction for runtime idle power savings. If the counters aren't enabled/working properly, fall back on the cp0 counter clock code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: make cp0 counter clocksource/event usable as fallback.Manuel Lauss
The current mips clock build infrastructure lets a system only use either the MIPS cp0 counter or a SoC specific timer as a clocksource / clockevent device. This patch renames the core cp0 counter clocksource / clockevent functions from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to call these renamed functions instead. Chips which can detect whether it is safe to use a chip-specific timer can now fall back on the cp0 counter if necessary and possible (e.g. Alchemy with a follow-on patch). Existing behaviour is not changed in any way. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: remove cpu_table.Manuel Lauss
Remove the cpu_table: - move detection of whether c0_config[OD] is read-only and should be set to fix various chip errata to au1000 headers. - move detection of write-only sys_cpupll to au1000 headers. - remove the BCLK switching code: Activation of this features should be left to the boards using the chips since it also affects external devices tied to BCLK, and only the board designers know whether it is safe to enable. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/cputable.c
2009-01-11MIPS: Alchemy: remove get/set_au1x00_lcd_clock().Manuel Lauss
There are no in-tree users, so remove them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Print irq handler descriptionManuel Lauss
Add the name set by set_irq_chip_and_handler_name() to the output of /proc/interrupts, like so: db1200 ~ # cat /proc/interrupts CPU0 8: 52 Alchemy-IC0-hilevel serial 10: 171 Alchemy-IC0-hilevel au1xxx-mmc 11: 47 Alchemy-IC0-hilevel Au1xxx dbdma 18: 1 Alchemy-IC0-hilevel au1550-spi 29: 1250997 Alchemy-IC0-riseedge timer 37: 211 Alchemy-IC0-hilevel ehci_hcd:usb1, ohci_hcd:usb2 38: 0 Alchemy-IC0-hilevel lcd 72: 2623 DB1200 CPLD-level ide0 73: 257 DB1200 CPLD-level eth0 84: 1 DB1200 CPLD-level sd_insert 85: 0 DB1200 CPLD-level sd_eject ERR: 0 Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: pb1200: update CPLD cascade irq handler.Manuel Lauss
Tested on Db1200. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: update core interrupt code.Manuel Lauss
This patch attempts to modernize core Alchemy interrupt handling code. - add irq_chips for irq controllers instead of irq type, - add a set_type() hook to change irq trigger type during runtime, - add a set_wake() hook to control GPIO0..7 based wakeup, - use linux' IRQF_TRIGGER_ constants instead of homebrew ones, - enable GENERIC_HARDIRQS_NO__DO_IRQ. - simplify plat_irq_dispatch - merge au1xxx_irqmap into irq.c file, the only place where its contents are referenced. - board_init_irq() is now mandatory for every board; use it to register the remaining (gpio-based) interrupt sources; update all boards accordingly. Run-tested on Db1200 and other Au1200 based platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
2009-01-11MIPS: Alchemy: move commandline mangling out of common codeManuel Lauss
Not every alchemy-based board might want these options forced on it, and most of this stuff seems to be intended for devboard code anyway. Remove commandline mangling code out of common chip code and instead add relevant sections to all in-tree boards to not change existing behaviour. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: devboards: consolidate filesManuel Lauss
Share some code and merge small files: - Extract the prom init code from all devboard files (they only differ in memory configuration). - Merge the irq configuration into board setup code. - Merge smaller files into board setup code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c create mode 100644 arch/mips/alchemy/devboards/prom.c
2009-01-11MIPS: Alchemy: Move development board code to common subdirectoryManuel Lauss
This should ease sharing of common devboard code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON to arch/mips/KconfigDavid Daney
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add defconfig for Cavium OCTEON.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Adjust the dma-common.c platform hooks.David Daney
We add a dev parameter to plat_unmap_dma_mem(), and hooks for plat_dma_supported() and plat_extra_sync_for_device() which should be nop changes for all existing targets. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON slot into proper tlb category.David Daney
Expand the case statement for build_tlb_write_entry so that it does the right thing on Cavium CPU variants. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Compute branch returns for Cavium OCTEON specific branch instructions.David Daney
For Cavium OCTEON, compute the return epc value for OCTEON specific branch instructions. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Cavium OCTEON multiplier state preservation.David Daney
For OCTEON, implement a save and restore of the multiplier state across context switches. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add SMP_ICACHE_FLUSH for the Cavium CPU family.David Daney
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 22:43:27 +0000