aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits) myri10ge: update driver version number to 1.4.3-1.369 r8169: add shutdown handler r8169: preliminary 8168d support r8169: support additional 8168cp chipset r8169: change default behavior for mildly identified 8168c chipsets r8169: add a new 8168cp flavor r8169: add a new 8168c flavor (bis) r8169: add a new 8168c flavor r8169: sync existing 8168 device hardware start sequences with vendor driver r8169: 8168b Tx performance tweak r8169: make room for more specific 8168 hardware start procedure r8169: shuffle some registers handling around (8168 operation only) r8169: new phy init parameters for the 8168b r8169: update phy init parameters r8169: wake up the PHY of the 8168 af_key: fix SADB_X_SPDDELETE response ath9k: Fix return code when ath9k_hw_setpower() fails on reset ath9k: remove nasty FAIL macro from ath9k_hw_reset() gre: minor cleanups in netlink interface gre: fix copy and paste error ...
2008-10-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits) MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq MIPS: Move ptrace prototypes to ptrace.h MIPS: Ptrace support for HARDWARE_WATCHPOINTS MIPS: Scheduler support for HARDWARE_WATCHPOINTS. MIPS: Watch exception handling for HARDWARE_WATCHPOINTS. MIPS: Probe watch registers and report configuration. MIPS: Add HARDWARE_WATCHPOINTS definitions and support code. MIPS: Add HARDWARE_WATCHPOINTS configure option. MIPS: Replace use of <asm-generic/uaccess.h> with native implementations. MIPS: TXx9: Add TX4939 ATA support (v2) MIPS: Rewrite spinlocks to ticket locks. MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment. MIPS: IP checksums: Remove unncessary .set pseudos MIPS: IP checksums: Remove unncessary folding of sum to 16 bit. MIPS: Move headfiles to new location below arch/mips/include MIPS: Alchemy: rename directory MIPS: Optimize get_user and put_user for 64-bit MIPS: TXx9: Implement prom_free_prom_memory MIPS: TXx9: Add RBTX4939 board support MIPS: TXx9: Add TX4939 SoC support ...
2008-10-11Merge branch 'for-linus' of git://git.alsa-project.org/alsa-kernelLinus Torvalds
* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits) ALSA: hda: VREF powerdown for headphones ALSA: hda: STAC_HP_M4 ALSA: ASoC: Check for machine type in GTA01 machine driver ALSA: mtpav - Fix race in probe ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk ALSA: Add a note on dependency of RTC stuff ALSA: ASoC: add new param mux to dapm_mux_update_power ALSA: Increase components array size ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver ALSA: hda: comment typo fix ALSA: hda: comment typo fix ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI ALSA: snd-usb-audio: support for Edirol UA-4FX device ALSA: usb - Fix possible Oops at USB-MIDI disconnection ALSA: hda - Fix another ALC889A (rev 0x100101) ALSA: hda: add more board-specific information for Realtek ALC662 rev1 ALSA: Correct Vladimir Barinov's e-mail address ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards ALSA: hda: SPDIF stream muting support ALSA: hda: appletv support ...
2008-10-11Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (27 commits) [S390] Fix checkstack for s390 [S390] fix initialization of stp [S390] 3215: Remove tasklet. [S390] console flush on panic / reboot [S390] introduce dirty bit for kvm live migration [S390] Add ioctl support for EMC Symmetrix Subsystem Control I/O [S390] xpram: per device block request queues. [S390] dasd: fix message flood for unsolicited interrupts [S390] Move private simple udelay function to arch/s390/lib/delay.c. [S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support. [S390] ptrace changes [S390] s390: use sys_pause for 31bit pause entry point [S390] qdio enhanced SIGA (iqdio) support. [S390] cio: fix cio_tpi. [S390] cio: Correct use of ! and & [S390] cio: inline assembly cleanup [S390] bus_id -> dev_set_name() for css and ccw busses [S390] bus_id ->dev_name() conversions in qdio [S390] Use s390_root_dev_* in kvm_virtio. [S390] more bus_id -> dev_name conversions ...
2008-10-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code [CPUFREQ] Don't export governors for default governor [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg() [CPUFREQ] use deferrable delayed work init in conservative governor [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put [CPUFREQ] add error handling for cpufreq_register_governor() error [CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c
2008-10-11MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irqFlorian Fainelli
This patchs defines the number of built-in the GPIOs present on the SoC as Documentation/gpio.txt recommends to do. Define irq_to_gpio/gpio_to_irq to return the right values so that it fixes a compilation error on drivers/gpio/gpiolib.c when enabling debugfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move ptrace prototypes to ptrace.hRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Ptrace support for HARDWARE_WATCHPOINTSDavid Daney
This is the final part of the watch register patch. Here we hook up ptrace so that the user space debugger (gdb), can set and read the registers. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Scheduler support for HARDWARE_WATCHPOINTS.David Daney
Here we hook up the scheduler. Whenever we switch to a new process, we check to see if the watch registers should be installed, and do it if needed. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.David Daney
Here we hook up the watch exception handler so that it sends SIGTRAP when the hardware watch registers are triggered. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Probe watch registers and report configuration.David Daney
Probe for watch register characteristics, and report them in /proc/cpuinfo. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.David Daney
This is the main support code for the patch. Here we just add the code, the following patches hook it up. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/include/asm/watch.h create mode 100644 arch/mips/kernel/watch.c
2008-10-11MIPS: Add HARDWARE_WATCHPOINTS configure option.David Daney
This is automatically set for all MIPS32 and MIPS64 processors. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add TX4939 ATA support (v2)Atsushi Nemoto
Add a helper routine to register tx4939ide driver and use it on RBTX4939 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Rewrite spinlocks to ticket locks.Ralf Baechle
Based on patch by Chad Reese of Cavium Networks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Remove unncessary .set pseudosRalf Baechle
They possibly silence meaningful warnings ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Alchemy: rename directoryRalf Baechle
It's more than the au1000 these days. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Implement prom_free_prom_memoryAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add RBTX4939 board supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-10-11MIPS: TXx9: Add TX4939 SoC supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11MIPS: TXx9: IOC LED supportAtsushi Nemoto
Add leds-gpio platform device for controlling LEDs connected to IOC on RBTX49XX and JMR3927 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Microoptimize interrupt handlersAtsushi Nemoto
The IOC interrupt status register on RBTX49XX only have 8 bits. Use 8-bit version of __fls() to optimize interrupt handlers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: stop_unused_modulesAtsushi Nemoto
TXx9 SoCs have pin multiplex. Stop some controller modules which can not be used due to pin configurations. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Convert to GPIO libFlorian Fainelli
This patch converts the rb532 code to use gpio library and register its gpio chip. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup the headers againFlorian Fainelli
This patch cleans up headers and regroups informations to where they should reside. While moving, try to have a consistant naming for defines. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove obsolute reference to setup_serial_portFlorian Fainelli
We are no longer using setup_serial_port. So just remove it from the prom code. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Fix id usage in platform devicesFlorian Fainelli
When there is only platform device of the same type, id = -1 should be used, fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: replace raw volatile read with a readlFlorian Fainelli
This patch replaces a raw read using volatiles with a readl. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove gpio bootup stateFlorian Fainelli
We are no longer using gpio bootup state, so do not export it and do not parse the kernel command line tag for it. Instead we provide gpio-keys for the button the gpio bootup state was checking. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Use physical addresses for gpio and device controller registersFlorian Fainelli
This patch fixes the misuse of virtual addresses for the GPIO and third device controller which would lead to problems while accessing ioremap'd registers. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup and group definitions to their right placesFlorian Fainelli
This patch moves GPIO related definitions to gpio.h and IRQ related to irq.h Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add board_be_init for TX4927/TX4938Atsushi Nemoto
Setup default board_be_handler for TX4927/TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Default machine_restart using watchdog resetAtsushi Nemoto
Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Make spi_eeprom.c more genericAtsushi Nemoto
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
2008-10-11MIPS: RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEPAtsushi Nemoto
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware. Also replace some printk with pr_info. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Raise priority of interrupts for errors, timers, SIOAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add mtd supportAtsushi Nemoto
Add helper routines to register physmap-flash platform devices for NOR flashes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Runtime configuration of timeout-errorAtsushi Nemoto
Add kernel options to control bus timeout error. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Cache fixupAtsushi Nemoto
TX39/TX49 can enable/disable I/D cache at runtime. Add kernel options to control them. This is useful to debug some cache-related issues, such as aliasing or I/D coherency. Also enable CWF bit for TX49 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Early command-line preprocessingAtsushi Nemoto
* Select board by command-line option or firmware environment variable. * Handle "masterclk=" option. * Add boards.h to centerize board_vec declaration. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 include/asm-mips/txx9/boards.h
2008-10-11MIPS: TXx9: Add prom_getenvAtsushi Nemoto
Add prom_getenv() which can be used for YAMON. This assumes other firmware should pass NULL for fw_arg2. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Improve handling of built-in and command-line argsAtsushi Nemoto
* Make prom_init_cmdline() static and be called from prom_init. * Append built-in args if the first character was '+'. * Drop command-line args if the first character of built-in was '-'. * Enclose args include spaces by quotes. * TX4938_NAND_BOOT is no longer needed. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RBTX4927: More explicit initializationAtsushi Nemoto
* Make sure all interrupts cleared on startup * Initialize some GPIOs Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: PMC MSP71XX gpio driversPatrick Glass
This new gpio driver for PMC-Sierra's MSP71xx SoC allows standard api calls for access to the general and extended gpio's. Signed-off-by: Patrick Glass <patrickglass@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
2008-10-11MIPS: Use compat_sys_ptraceThomas Bogendoerfer
This replaces mips's sys_ptrace32 with a compat_arch_ptrace and enables the new generic definition of compat_sys_ptrace instead. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 16:07:53 +0000