Age | Commit message (Collapse) | Author |
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Minimal set of kernel changes to support Android operation.
Note arch/arm/configs/gta02-android-defconfig
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Try to make sure about no compiler malarky by volatile. Change hdq busy
detect. Change error handling path in hdq interface to fiq.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
This large patch removes motion sensor from Linux SPI bitbang driver.
Previously, some access was done through Linux SPI protected
by a mutex, and the ISR access was done by platform bitbang code due
to inability of Linux SPI driver to work in the interrupt context.
Now all access is done by bitbang callbacks in mach_gta02.c and are
protected by single scheme of interrupt lockout for the duration --
I line-by-line'd the driver to confirm that best I could, adding
protection and taking more care on several /sys related paths.
Because this is no longer a Linux SPI bus driver, the path for various
/sys things have changed. They can now be found down, eg,
/sys/devices/platform/lis302dl.1/sample_rate
lis302dl.1 is the top sensor and .2 the bottom. The names of the input
susbsytem paths remain the same as before.
Not working in interrupt context made trouble using interrupt lockout as
locking
[21474615.495000] BUG: sleeping function called from invalid context at kernel/sched.c:4684
[21474615.495000] in_atomic():0, irqs_disabled():128
[21474615.495000] 2 locks held by bash/779:
[21474615.495000] #0: (&buffer->mutex){....}, at: [<c00ec1b0>] sysfs_write_file+0x30/0x80
[21474615.495000] #1: (pm_mutex){....}, at: [<c007a34c>] enter_state+0xd4/0x10c
[21474615.495000] [<c0032a14>] (dump_stack+0x0/0x14) from [<c0049410>] (__might_sleep+0xdc/0xf8)
[21474615.495000] [<c0049334>] (__might_sleep+0x0/0xf8) from [<c0316c38>] (wait_for_common+0x28/0x190)
[21474615.495000] r5:c79ffd00 r4:c79ffd4c
[21474615.495000] [<c0316c10>] (wait_for_common+0x0/0x190) from [<c0316e30>] (wait_for_completion+0x18/0x1c)
[21474615.495000] r8:c79ffd84 r7:c79c4800 r6:c79ffd00 r5:c79ffd20 r4:c79ffd4c
[21474615.495000] [<c0316e18>] (wait_for_completion+0x0/0x1c) from [<c01d28ec>] (spi_sync+0xa0/0xb8)
[21474615.495000] [<c01d284c>] (spi_sync+0x0/0xb8) from [<c020ca10>] (__reg_write+0x88/0x94)
[21474615.495000] [<c020c988>] (__reg_write+0x0/0x94) from [<c020cc30>] (lis302dl_resume+0x54/0x198)
[21474615.495000] r6:60000013 r5:c79c4800 r4:c79bc9c0
[21474615.495000] [<c020cbdc>] (lis302dl_resume+0x0/0x198) from [<c01d2fb0>] (spi_resume+0x38/0x44)
[21474615.495000] r6:00000010 r5:c79c4800 r4:c79c4974
[21474615.495000] [<c01d2f78>] (spi_resume+0x0/0x44) from [<c0198f34>] (resume_device+0x8c/0x1b0)
[21474615.495000] [<c0198ea8>] (resume_device+0x0/0x1b0) from [<c01990c0>] (dpm_resume+0x68/0x134)
[21474615.495000] r7:00000003 r6:00000010 r5:c79c4800 r4:c79c4974
[21474615.495000] [<c0199058>] (dpm_resume+0x0/0x134) from [<c01991b4>] (device_resume+0x28/0x38)
[21474615.495000] r6:00000003 r5:c08b7188 r4:00000010
[21474615.495000] [<c019918c>] (device_resume+0x0/0x38) from [<c007a0f8>] (suspend_devices_and_enter+0x110/0x180)
[21474615.495000] r4:00000000
[21474615.495000] [<c0079fe8>] (suspend_devices_and_enter+0x0/0x180) from [<c007a320>] (enter_state+0xa8/0x10c)
[21474615.495000] r6:00000003 r5:c03aa414 r4:00000000
[21474615.495000] [<c007a278>] (enter_state+0x0/0x10c) from [<c007a430>] (state_store+0xac/0xc0)
[21474615.495000] r6:c7b80000 r5:00000003 r4:c03aa414
[21474615.495000] [<c007a384>] (state_store+0x0/0xc0) from [<c014dfb4>] (kobj_attr_store+0x24/0x30)
[21474615.495000] [<c014df90>] (kobj_attr_store+0x0/0x30) from [<c00ebe58>] (flush_write_buffer+0x54/0x68)
[21474615.495000] [<c00ebe04>] (flush_write_buffer+0x0/0x68) from [<c00ec1d8>] (sysfs_write_file+0x58/0x80)
[21474615.495000] r8:c7acca80 r7:c79fff78 r6:000be408 r5:00000004 r4:c7a19ea0
[21474615.495000] [<c00ec180>] (sysfs_write_file+0x0/0x80) from [<c00a91b8>] (vfs_write+0xbc/0x14c)
[21474615.495000] [<c00a90fc>] (vfs_write+0x0/0x14c) from [<c00a9774>] (sys_write+0x4c/0x7c)
[21474615.495000] r7:00000004 r6:00000000 r5:00000000 r4:c7acca80
[21474615.495000] [<c00a9728>] (sys_write+0x0/0x7c) from [<c002dc20>] (ret_fast_syscall+0x0/0x2c)
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Last rebase to stable-2.6.26 left some trash from rebasing the patches on top of this,
clean it back out
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Weeks of frantic effort to control Glamo, traced the issue to two outcomes:
nWAIT is forced down and the device is hard locked, or we survive immediate
Glamo resume and die again with nWAIT forced down when the framebuffer driver
tries to flash the soft cursor.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Light an LED in the dark crashing hell of dead resume... the problems come from
Glamo it turns out
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
All that stuff should be enforced by device tree now, out with it
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Oooh it's a lot cleaner now and explained in the comments
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Simplify it now we have Glamo as child of pcf50633
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Well dependencies of pcf50633 are getting a bit much, let's break them
out into an array
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Vibrator relies on FIQ, represent that in device tree
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Things can depend on PWM being up, allow device tree to show that
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
GPS power control device is obviously a child of pcf50633 since it
wants to meddle with regulators. Define it to be so in the device tree.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This is an early start on populating pcf50633 device tree callback, later
we convert the guys here and some additional ones to an array.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
HDQ secretly depends on FIQ, bq27000 depends on HDQ, this patch uses the
new callbacks to make that explicit in both cases for our device
Here's what can happen without it:
[ 2.680000] Bad mode in data abort handler detected
[ 2.680000] Internal error: Oops - bad mode: 0 [#1] PREEMPT
[ 2.680000] Modules linked in:
[ 2.680000] CPU: 0 Not tainted (2.6.24 #791)
[ 2.680000] PC is at trace_hardirqs_off+0x28/0xfc
[ 2.680000] LR is at fiq_kick+0x90/0xa8
[ 2.680000] pc : [<c006759c>] lr : [<c0035000>] psr: 200000d1
[ 2.680000] sp : c7c2dd98 ip : c7c2dde0 fp : c7c2ddf4
[ 2.680000] r10: 00000008 r9 : c7d70e00 r8 : 00000002
[ 2.680000] r7 : 00000009 r6 : 200000d1 r5 : 00000000 r4 : 0000006e
[ 2.680000] r3 : c03ec000 r2 : 00000000 r1 : 00000000 r0 : 0000006e
[ 2.680000] Flags: nzCv IRQs off FIQs off Mode FIQ_32 ISA ARM Segment kernel
[ 2.680000] Control: c000717f Table: 30004000 DAC: 00000017
[ 2.680000] Process events/0 (pid: 5, stack limit = 0xc7c2c268)
[ 2.680000] Stack: (0xc7c2dd98 to 0xc7c2e000)
[ 2.680000] dd80: 0000006e 00000000
[ 2.680000] dda0: 00000000 c03ec000 0000006e 00000000 200000d1 00000009 00000002 c7d70e00
[ 2.680000] ddc0: 00000008 c7c2ddf4 c7c2dde0 c7c2dd98 c0035000 c006759c 200000d1 ffffffff
[ 2.680000] dde0: 00000009 00000004 c7c2de0c c7c2ddf8 c01f87d0 c0034f80 c7d49260 c7d49260
[ 2.680000] de00: c7c2de34 c7c2de10 c01f80dc c01f87a8 c7d49260 00000007 c7c2de5c c7d8e000
[ 2.680000] de20: c03e2908 c7d6b000 c7c2de54 c7c2de38 c01f82d0 c01f80c0 c7c2de64 00000000
[ 2.680000] de40: 00000007 c7d70e00 c7c2de84 c7c2de58 c01f79d4 c01f8154 c7c2de84 c7c2de68
[ 2.680000] de60: c0098c28 00000000 0000008c c7d8e000 c7d49264 00000001 c7c2deb4 c7c2de88
[ 2.680000] de80: c01f7d4c c01f799c c038c450 c7d70e00 c7d6b000 00000000 c7d6b000 c03da064
[ 2.680000] dea0: c038c450 c7d70ee8 c7c2decc c7c2deb8 c01aa924 c01f7c6c 00000002 c03d9fe0
[ 2.680000] dec0: c7c2df24 c7c2ded0 c016c828 c01aa864 c7c2def4 c7c2dee0 c02eb438 00000000
[ 2.680000] dee0: c0380680 c7d867e0 c7c2df14 c7c2def8 c0227888 c02eb414 c7d49264 00000002
[ 2.680000] df00: c7c03d40 c7d49264 00000000 c7c2df68 00000000 c01f7844 c7c2df34 c7c2df28
[ 2.680000] df20: c016caa8 c016c6b8 c7c2df5c c7c2df38 c01f794c c016caa4 c7c03d40 00000002
[ 2.680000] df40: c7c03d40 c7c2c000 c7d4928c c7c2df68 c7c2df9c c7c2df60 c005a30c c01f7854
[ 2.680000] df60: 00000002 c005a2a4 c0664458 c044c148 c038c460 00000000 c7c2dfb0 c7c03d40
[ 2.680000] df80: c7c2c000 00000000 00000000 00000000 c7c2dfd4 c7c2dfa0 c005b094 c005a218
[ 2.680000] dfa0: c02e8e68 00000000 c7c2ab60 c005ecb0 c7c2dfb0 c7c2dfb0 00000000 c7c2c000
[ 2.680000] dfc0: c7c03d40 c005afb0 c7c2dff4 c7c2dfd8 c005ebac c005afc0 00000000 00000000
[ 2.680000] dfe0: 00000000 00000000 00000000 c7c2dff8 c004c138 c005eb5c 00000000 00000000
[ 2.680000] Backtrace:
[ 2.680000] [<c0034f70>] (fiq_kick+0x0/0xa8) from [<c01f87d0>] (gta02hdq_read+0x38/0x90)
[ 2.680000] r5:00000004 r4:00000009
[ 2.680000] [<c01f8798>] (gta02hdq_read+0x0/0x90) from [<c01f80dc>] (hdq_read16+0x2c/0x84)
[ 2.680000] r5:c7d49260 r4:c7d49260
[ 2.680000] [<c01f80b0>] (hdq_read16+0x0/0x84) from [<c01f82d0>] (bq27000_battery_get_property+0x18c/0x304)
[ 2.680000] [<c01f8144>] (bq27000_battery_get_property+0x0/0x304) from [<c01f79d4>] (power_supply_show_property+0x48/0x124)
[ 2.680000] r6:c7d70e00 r5:00000007 r4:00000000
[ 2.680000] [<c01f798c>] (power_supply_show_property+0x0/0x124) from [<c01f7d4c>] (power_supply_uevent+0xf0/0x1a4)
[ 2.680000] r8:00000001 r7:c7d49264 r6:c7d8e000 r5:0000008c r4:00000000
[ 2.680000] [<c01f7c5c>] (power_supply_uevent+0x0/0x1a4) from [<c01aa924>] (dev_uevent+0xd0/0x10c)
[ 2.680000] [<c01aa854>] (dev_uevent+0x0/0x10c) from [<c016c828>] (kobject_uevent_env+0x180/0x3ec)
[ 2.680000] r5:c03d9fe0 r4:00000002
[ 2.680000] [<c016c6a8>] (kobject_uevent_env+0x0/0x3ec) from [<c016caa8>] (kobject_uevent+0x14/0x18)
[ 2.680000] [<c016ca94>] (kobject_uevent+0x0/0x18) from [<c01f794c>] (power_supply_changed_work+0x108/0x114)
[ 2.680000] [<c01f7844>] (power_supply_changed_work+0x0/0x114) from [<c005a30c>] (run_workqueue+0x104/0x208)
[ 2.680000] r8:c7c2df68 r7:c7d4928c r6:c7c2c000 r5:c7c03d40 r4:00000002
[ 2.680000] [<c005a208>] (run_workqueue+0x0/0x208) from [<c005b094>] (worker_thread+0xe4/0xf8)
[ 2.680000] [<c005afb0>] (worker_thread+0x0/0xf8) from [<c005ebac>] (kthread+0x60/0x94)
[ 2.680000] r6:c005afb0 r5:c7c03d40 r4:c7c2c000
[ 2.680000] [<c005eb4c>] (kthread+0x0/0x94) from [<c004c138>] (do_exit+0x0/0x6f0)
[ 2.680000] r6:00000000 r5:00000000 r4:00000000
[ 2.680000] Code: e3c3303f e3520000 e593200c 089da800 (e5923a68)
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
As part of the device tree stuff, some things are basically children of FIQ. Allow
a callback in the machine-specific code to attach the children when the FIQ device has
been instantiated
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add missing initialization for the touchscreen driver for the
gta01 platform.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Rather than using conservative default timings for the NAND flash,
use the timings as specified in the S3C2442B MCP data sheet.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
By adding missing #include <linux/module.h> we fix 6 warnings that we
care about (in our patchset).
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
These functions are undefined at first use which causes the build to
fail. Just push the definitions forward, for now. This file needs to
be cleaned up a good bit, in general, so we'll put in a better fix at
that time. For now, this builds, at least...
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This patch carries over the OpenMoko modifications at
include/asm-arm/arch-s3c2410/spi-gpio.h to
arch/arm/mach-s3c2410/include/mach/spi-gpio.h
Note: board_size and board_info have been removed upstream, but as we
still rely on them we'll just put them back for now. These will need to
be removed (and the corresponding driver changes made, of course) before
this can go upstream.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This pulls the Moko changes to regs-sdi.h that were in
include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and
deletes the file at include/asm-arm.
Note: we have been using a mix of regs-sdi.h from the two different
locations. The unification of these two files may have some unknown
consequences... keep your eyes open for oddities after applying this.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This "move" is not so much a file move as just carrying over the current
status of the irqs.h file from include/asm-arm/arch-s3c2410 to the file
at arch/arm/mach-s3c2410/include/mach. For some reason both files
existed and had become out of sync.
NOTE: Some of these changes look fishy... please check these properly.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file was moved in the big file move, but some OpenMoko specific
changes did not make it. This patch peels out the relevant bits and
adds them to the gpio.h file in the upstream location.
The only OpenMoko specific change is the definition of gpio_to_irq and
irq_to_gpio. These functions should really be defined in gpio_chip and
asm-generic/gpio.h; this is coming soon, but until then we'll just use
the Moko definitions that we've been using up until now.
This is not strictly correct for the GTA02 case, but it works given
the configuration that's currently in use. This can be fixed (and
should become evident) when the configuration options are cleaned up.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This patch removes a large number of #ifdefs that switch on machine
model. Where applicable, the machine_is_* idiom is favoured; this
mainly makes the code easier to read, but it does have some other
advantages, too.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Problems building with GTA01 disabled in config come down to not selecting the
common CONFIG for GTAXX with GTA02, and GTA01-specific gps stuff.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Delete old configs in stable-tracking, move defconfig-2.6.27 to the common config site
arch/arm/configs/gta02-moredrivers-defconfig
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Don't change bt regulator at all if already at requested state, and
turn it to opposite on | off state before changing regulator voltage
and setting final state.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|