aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-10-15MIPS: IP22/28: Switch over to RTC class driverThomas Bogendoerfer
This patchset removes some dead code and creates a platform device for the RTC class driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: PCI: Scan busses when they are registeredAurelien Jarno
The patch below changes register_pci_controller() such that controllers being added after pcibios_init() has run are be scanned immediately. This is needed for example by the BCM47xx PCI controller, which is located on the SSB bus, which is now initialized after the PCI subsystem. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add reset button supportAurelien Jarno
This patch adds support for the reset button of WGT634U machine, using GPIO interrupts. Based on a patch from Michel Lespinasse. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Use the new SSB GPIO APIAurelien Jarno
This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO API, which does a lot things that were implemented directly in the BCM47xx code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Remove references to BCM947XXAurelien Jarno
This patch removes the remaining reference to the BCM947xx development board codename. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add machine detection messageAurelien Jarno
This adds a printk message when a WGT634U machine is detected. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Align .data.cacheline_aligned based on CONFIG_MIPS_L1_CACHE_SHIFTDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: show_cpuinfo prints the type of the calling CPUJohannes Dickgreber
It should print the type of the Nth processor. Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Fix wrong branch target in new spin_lock code.Johannes Dickgreber
Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Have a heart for a lonely, lost header file ...Ralf Baechle
... and move it to where all its brothers and sisters reside. Requested by Shane McDonald <mcdonald.shane@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-14Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-viapro: Add support for SMBus Process Call transactions i2c: Restore i2c_smbus_process_call function i2c: Do earlier driver model init i2c: Only build Tyan SMBus mux drivers on x86 i2c: Guard against oopses from bad init sequences i2c: Document the implementation details of the /dev interface i2c: Improve dev-interface documentation i2c-parport-light: Don't register a platform device resource hwmon: (dme1737) Convert to a new-style i2c driver hwmon: (dme1737) Be less i2c-centric i2c/tps65010: Vibrator hookup to gpiolib i2c-viapro: Add VX800/VX820 support i2c: Renesas Highlander FPGA SMBus support i2c-pca-isa: Don't grab arbitrary resources i2c/isp1301_omap: Convert to a new-style i2c driver, part 2 i2c/isp1301_omap: Convert to a new-style i2c driver, part 1
2008-10-14x86: register a platform RTC device if PNP doesn't describe itBjorn Helgaas
Most if not all x86 platforms have an RTC device, but sometimes the RTC is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI: http://bugzilla.kernel.org/show_bug.cgi?id=11580 https://bugzilla.redhat.com/show_bug.cgi?id=451188 It's best if we can discover the RTC via PNP because then we know which flavor of device it is, where it lives, and which IRQ it uses. But if we can't, we should register a platform device using the compiled-in RTC_PORT/RTC_IRQ resource assumptions. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Reported-by: Rik Theys <rik.theys@esat.kuleuven.be> Reported-by: shr_msn@yahoo.com.tw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14arch/m68k/mm/kmap.c: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); .. if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ..> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: init_irq_proc depends on CONFIG_PROC_FSGeert Uytterhoeven
If CONFIG_PROC_FS is not set, I get: | arch/m68k/kernel/ints.c:433: error: redefinition of 'init_irq_proc' | include/linux/interrupt.h:438: error: previous definition of 'init_irq_proc' was here This was introduced by commit 6168a702ab0be181e5e57a0b2d0e7376f7a47f0b ("Declare init_irq_proc before we use it."), which replaced the #ifdef protection of the init_irq_proc() call by a static inline dummy if CONFIG_PROC_FS is not set. Make init_irq_proc() depend on CONFIG_PROC_FS to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: remove the dead PCI codeAdrian Bunk
This patch removes the no longer used m68k PCI code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Remove the broken Hades supportAdrian Bunk
This patch removes the Hades support that was marked as BROKEN 5 years ago. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Add missing dma_sync_single_range_for_{cpu,device}()Geert Uytterhoeven
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_cpu': | include/linux/ssb/ssb.h:517: error: implicit declaration of function 'dma_sync_single_range_for_cpu' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_device': | include/linux/ssb/ssb.h:538: error: implicit declaration of function 'dma_sync_single_range_for_device' Add the missing dma_sync_single_range_for_{cpu,device}(), and remove the `inline' for the non-static function dma_sync_single_for_device(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Define rtc_lock on AtariGeert Uytterhoeven
The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt yet, the spinlock calls tend to get optimized away, but not for all configurations, causing in some rare cases: | ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined! | ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined! Add the spinlock to the Atari core code to avoid this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Remove unused atari_kbd_translate()Geert Uytterhoeven
If CONFIG_VT=n, I get: | arch/m68k/atari/built-in.o: In function `atari_kbd_translate': | arch/m68k/atari/atakeyb.c:640: undefined reference to `shift_state' Just remove atari_kbd_translate(), as it's unused. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Modular Amiga keyboard needs key_mapsGeert Uytterhoeven
| ERROR: "key_maps" [drivers/input/keyboard/amikbd.ko] undefined! Export key_maps in the Amiga core code, as its defined in an autogenerated file (drivers/char/defkeymap.c) Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Reverse platform MMU logic so Sun 3 is lastGeert Uytterhoeven
Currently Sun 3 support is the first platform option, as the Sun 3 MMU is incompatible with standard Motorola MMUs. However, this means that `allmodconfig' enables support for Sun 3, and thus disables support for all other platforms. Reverse the logic and move Sun 3 last, so `allmodconfig' enables all platforms except for Sun 3, increasing compile-coverage. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Add NOTES to init data so its discarded at bootRoman Zippel
Add .note.gnu.build-id to init data so it's discarded at boot. [Andreas Schwab] Use NOTES macro Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Put .bss at the end of the data sectionRoman Zippel
Put .bss at the end of the data section Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Use new printk() extension %pS to print symbolsGeert Uytterhoeven
This changes the oops and backtrace code to use the new `%pS' printk() extension to print out symbols rather than manually calling print_symbol. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: use bcd2bin/bin2bcdAdrian Bunk
This patch changes m68k to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. It also remove local bcd2bin/bin2bcd implementations in favor of the global ones. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14i2c/isp1301_omap: Convert to a new-style i2c driver, part 2Jean Delvare
Based on David Brownell's patch for tps65010 and previous work by Felipe Balbi, this patch finishes converting isp1301_omap to a new-style i2c driver. There's definitely room for further drivers cleanups, but these are out of the scope of this patch. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Tony Lindgren <tony@atomide.com>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits) ata: Add documentation for hard disk shock protection interface (v3) ide: Implement disk shock protection support (v4) ide-cd: fix printk format warning piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list ide-atapi: assign taskfile flags per device type ide-cd: move cdrom_info.dma to ide_drive_t.dma ide: add ide_drive_t.dma flag ide-cd: add a debug_mask module parameter ide-cd: convert driver to new ide debugging macro (v3) ide: move SFF DMA code to ide-dma-sff.c ide: cleanup ide-dma.c ide: cleanup ide_build_dmatable() ide: remove needless includes from ide-dma.c ide: switch to DMA-mapping API part #2 ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: __ide_dma_end() -> ide_dma_end() pmac: remove needless pmac_ide_destroy_dmatable() wrapper pmac: remove superfluous pmif == NULL checks ide: Two fixes regarding memory allocation ...
2008-10-13Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits) V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default. V4L/DVB (9183): S2API: Return error of the caller provides 0 commands. V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP V4L/DVB (9179): S2API: frontend.h cleanup V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO. V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16 V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator. V4L/DVB (9175): Remove NULL pointer in stb6000 driver. V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator. V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API. V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API. V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod. V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams. V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote V4L/DVB: v4l2-dev: remove duplicated #include ...
2008-10-13ide-generic: remove no longer needed ide_probe_legacy()Bartlomiej Zolnierkiewicz
There is now a generic solution [ide_generic_check_pci_legacy_iobases()] so MIPS-specific ide_probe_legacy() is no longer necessary. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13xtensa: remove dead CONFIG_BLK_DEV_IDE codeAdrian Bunk
I don't know why this was there, but it was dead code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: chris@zankel.net Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits) Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks Blackfin arch: Fix bogus str_ident check in gpio code Blackfin arch: AD7879 Touchscreen driver Blackfin arch: introducing bfin_addr_dcachable Blackfin arch: fix a typo in comments Blackfin arch: Remove useless head file Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542) Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible Blackfin arch: update anomaly headers to match the latest sheet Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart() Blackfin arch: print out error/warning if you are running on the incorrect CPU type Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts Blackfin arch: update board defconfigs Blackfin arch: Add optional verbose debug Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1) Blackfin arch: ptrace - fix off-by-one check on end of memory regions Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display Blackfin arch: flash memory map and dm9000 resources updating Blackfin arch: early prink code still use uart core console functions to parse and set configure option string ...
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: chmc: Mark %ver register inline asm with __volatile__ sparc64: Add missing notify_cpu_starting() call. sparc32: fix build errors
2008-10-13Merge branch 'proc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc * 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: proc: remove kernel.maps_protect proc: remove now unneeded ADDBUF macro [PATCH] proc: show personality via /proc/pid/personality [PATCH] signal, procfs: some lock_task_sighand() users do not need rcu_read_lock() proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig proc: make grab_header() static proc: remove unused get_dma_list() proc: remove dummy vmcore_open() proc: proc_sys_root tweak proc: fix return value of proc_reg_open() in "too late" case Fixed up trivial conflict in removed file arch/sparc/include/asm/dma_32.h
2008-10-13Merge git://git.infradead.org/users/dwmw2/random-2.6Linus Torvalds
* git://git.infradead.org/users/dwmw2/random-2.6: Fix autoloading of MacBook Pro backlight driver. Automatic MODULE_ALIAS() for DMI match tables. Remove asm/a.out.h files for all architectures without a.out support. Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUT Remove redundant CONFIG_ARCH_SUPPORTS_AOUT S390: Update comments about why we don't use <asm-generic/statfs.h> SPARC: Use <asm-generic/statfs.h> PowerPC: Use <asm-generic/statfs.h> PARISC: Use <asm-generic/statfs.h> x86_64: Use <asm-generic/statfs.h> IA64: Use <asm-generic/statfs.h> ARM: Use <asm-generic/statfs.h> Make <asm-generic/statfs.h> suitable for 64-bit platforms. Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver [MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE. EFS: Don't set f_fsid in statfs().
2008-10-13Merge phase #5 (misc) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip Merges oprofile, timers/hpet, x86/traps, x86/time, and x86/core misc items. * 'x86-core-v4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (132 commits) x86: change early_ioremap to use slots instead of nesting x86: adjust dependencies for CONFIG_X86_CMOV dumpstack: x86: various small unification steps, fix x86: remove additional_cpus x86: remove additional_cpus configurability x86: improve UP kernel when CPU-hotplug and SMP is enabled dumpstack: x86: various small unification steps dumpstack: i386: make kstack= an early boot-param and add oops=panic dumpstack: x86: use log_lvl and unify trace formatting dumptrace: x86: consistently include loglevel, print stack switch dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack dumpstack: x86: make printk_address equal dumpstack: x86: move die_nmi to dumpstack_32.c traps: x86: finalize unification of traps.c traps: x86: make traps_32.c and traps_64.c equal traps: x86: various noop-changes preparing for unification of traps_xx.c traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protection traps: i386: expand clear_mem_error and remove from mach_traps.h traps: x86_64: make io_check_error equal to the one on i386 traps: i386: use preempt_conditional_sti/cli in do_int3 ...
2008-10-13uml: small cleanups and note bugs to be dealt with by uml authors...Alan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13serial: allow 8250 to be used on sparcDavid Miller
This requires three changes: 1) Remove !SPARC restriction in Kconfig. 2) Move Sparc specific serial drivers before 8250, so that serial console devices don't change names on us, even if 8250 finds devices. 3) Since the Sparc specific serial drivers try to use the same major/minor device namespace as 8250, some coordination is necessary. Use the sunserial_*() layer routines to allocate minor number space within TTY_MAJOR when CONFIG_SPARC. This has no effect on other platforms. Thanks to Josip Rodin for bringing up this issue and testing plus debugging various revisions of this patch. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped ↵Sonic Zhang
interrupts in PIO mode Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UARTGraf Yang
We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework to monitor the TX status. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: move common variables out of serial headers and into ↵Mike Frysinger
the serial driver move common variables out of serial headers and into the serial driver and rename "nr_ports" to "nr_active_ports" so as to easily differentiate between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled) Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-13Merge branches 'oprofile-v2' and 'timers/hpet' into x86/core-v4Ingo Molnar
2008-10-13Merge branch 'linus' into oprofile-v2Ingo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/oprofile/nmi_int.c include/linux/pci_ids.h
2008-10-13x86: change early_ioremap to use slots instead of nestingYinghai Lu
so we could remove the requirement that one needs to call early_iounmap() in exactly reverse order of early_ioremap(). Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: adjust dependencies for CONFIG_X86_CMOVJan Beulich
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13dumpstack: x86: various small unification steps, fixAlexander van Heukelum
After "dumpstack: x86: various small unification steps", the assembler gives the following compile error. The error is in dumpstack_64.c. {standard input}: Assembler messages: {standard input}:720: Error: Incorrect register `%rbx' used with `l' suffix {standard input}:1340: Error: Incorrect register `%r12' used with `l' suffix Indeed the suffix in get_bp() was wrong. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: remove additional_cpusThomas Gleixner
remove remainder of additional_cpus logic. We now just listen to the disabled_cpus value like we did for years. disabled_cpus is always >= 0 so no need for an extra check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: remove additional_cpus configurabilityIngo Molnar
additional_cpus=<x> parameter is dangerous and broken: for example if we boot additional_cpus=-2 on a stock dual-core system it will crash the box on bootup. So reduce the maze of code a bit by removingthe user-configurability angle. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: improve UP kernel when CPU-hotplug and SMP is enabledThomas Gleixner
num_possible_cpus() can be > 1 when disabled CPUs have been accounted. Disabled CPUs are not in the cpu_present_map, so we can use num_present_cpus() as a safe indicator to switch to UP alternatives. Reported-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>