aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-07-28sh: add SuperH Mobile I2C platform data to sh7343Magnus Damm
This patch adds platform data for two I2C channels to the sh7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add interrupt ack code to sh4aYoshihiro Shimoda
This patch is based on interrupt acknowledge code for external interrupt sources on sh3 processors and adds on sh4a processors. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Fix up link error on SH-2 zImage with older binutils.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Conditionally re-enable IRQs in fault path.Stuart Menefy
The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Record the major cut revision for probed SH-4A parts.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Optimized flush_icache_range() implementation.Chris Smith
Add implementation of flush_icache_range() suitable for signal handler and kprobes. Remove flush_cache_sigtramp() and change signal.c to use flush_icache_range(). Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Stub in silicon cut in CPU info.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Tidy up the SH-3 exception vector table.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28SH7619 add ethernet controler supportYoshinori Sato
- Add EtherC + PHY resource define. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Remove sh_pcic_io_xxx function from Solution Engine IO codeNobuhiro Iwamatsu
sh_pcic_io_xxx function are very old. In linux-2.4, mrshpc_ss socket driver used this function. But there is not this driver to the present kernel. I deleted these cords and checked operation. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Fix Kconfig of AP-325RXANobuhiro Iwamatsu
The CPU of AP-325RXA is SH7723, but a CPU becomes selectable. This patch fixes this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Clean up code of Solution Engine 770xNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Update Solution Enginge 7712 defconfigNobuhiro Iwamatsu
Enable SH-Ether support and NFS userland support. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Solution Enginge 7710/7712 SH-Ether supportNobuhiro Iwamatsu
Add support SH-Ether for Hitachi Solution Engine. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh/kernel/ cleanupsAdrian Bunk
This patch contains the following cleanups: - make the following needlessly global code static: - cf-enabler.c: cf_init() - cpu/clock.c: __clk_enable() - cpu/clock.c: __clk_disable() - process_32.c: default_idle() - time_32.c: struct clocksource_sh - timers/timer-tmu.c: struct tmu_timer_ops - remove the following unused functions (no CONFIG_BLK_DEV_FD on sh): - process_{32,64}.c: disable_hlt() - process_{32,64}.c: enable_hlt() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: make pcibios_max_latency staticAdrian Bunk
This patch makes the needlessly global pcibios_max_latency static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: make EARLY_PCI_OP's staticAdrian Bunk
This patch makes the needlessly global EARLY_PCI_OP's static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh/boards/dreamcast/rtc.c: make 2 functions staticAdrian Bunk
This patch makes the needlessly global aica_rtc_{get,set}timeofday() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Renesas Solutions SH7763RDP board supportNobuhiro Iwamatsu
This patch adds basic support for the SH7763RDP board. This supports a basic stuff provided in SH7763, like SCIF, NOR Flash and USB host. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SCIF2 support for SH7763.Nobuhiro Iwamatsu
SH7763 has 3 SCIF device. Current code supports SCIF0 and 1. SCIF0 and 1 are same register constitution, but only SCIF2 is different. I added support of SCIF2. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add support Renesas Solutions AP-325RXA boardYusuke Goda
This board is SH7723 base board. This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound, Ether and other. This patch supports SCIF, NOR Flash. Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add support for 16kB PAGE_SIZE.Paul Mundt
16kB is a useful size on nommu, while 64kB still tends to be too big to be useful. Newer MMUs are likely to support this as well, so plug it in in anticipation of those, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Support variable page sizes on nommu.Paul Mundt
PAGE_SIZE doesn't need to be fixed at 4096 on nommu, so stub in a !MMU case for the various PAGE_SIZE Kconfig options. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: RSK+ 7203 board support.Paul Mundt
This adds initial support for the RTE RSK+ SH7203 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Make dump_task dependent on ELF core.Paul Mundt
Currently this is only linked in for CONFIG_BINFMT_ELF, make it dependent on CONFIG_ELF_CORE, so it's both selectable there and also linked in for CONFIG_BINFMT_ELF_FDPIC. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Initial ELF FDPIC support.Paul Mundt
This adds initial support for ELF FDPIC on MMU-less SH, as per version 0.2 of the ABI definition at: http://www.codesourcery.com/public/docs/sh-fdpic/sh-fdpic-abi.txt Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28move arch/sh/lib/io.o to obj-yAdrian Bunk
EXPORT_SYMBOL's in lib-y considered harmful: <-- snip --> ... MODPOST 1837 modules ERROR: "__raw_readsl" [drivers/ssb/ssb.ko] undefined! ERROR: "__raw_writesl" [drivers/ssb/ssb.ko] undefined! ERROR: "__raw_writesl" [drivers/net/smc91x.ko] undefined! ERROR: "__raw_readsl" [drivers/net/smc91x.ko] undefined! ERROR: "__raw_writesl" [drivers/net/3c59x.ko] undefined! ERROR: "__raw_readsl" [drivers/net/3c59x.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh dreamcast: export board_pci_channelsAdrian Bunk
This patch fixes the following build error: <-- snip --> ... MODPOST 1837 modules ERROR: "board_pci_channels" [drivers/pcmcia/yenta_socket.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> I freely admit that it's a pathological configuration, but as long as it is allowed it should build. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: export get_cpu_subtypeAdrian Bunk
This patch fixes the following build error: <-- snip --> ... MODPOST 1837 modules ERROR: "get_cpu_subtype" [arch/sh/oprofile/oprofile.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: fix seq_file memory leakLi Zefan
When using single_open(), single_release() should be used instead of seq_release(), otherwise there is a memory leak. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28powerpc: Disable 64K hugetlb support when doing 64K SPU mappingsBenjamin Herrenschmidt
The 64K SPU local store mapping feature is incompatible with the 64K huge pages support due to the inability of some parts of the memory management to differenciate between them while they use a different page table format. For now, disable 64K huge pages when CONFIG_SPU_FS_64K_LS, in the long run, this can be fixed by making this feature use the hugetlb page table format. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/powermac: Fixup default serial port device for pmac_zilogBenjamin Herrenschmidt
This removes the non-working code in legacy_serial that tried to handle the powermac SCC ports, and instead add a (now working) function to the powermac platform code to find the default serial console if any. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/powermac: Use sane default baudrate for SCC debuggingBenjamin Herrenschmidt
When using the "sccdbg" option to route early kernel messages and xmon to the SCC serial port on PowerMacs, when this wasn't the configured output port of Open Firmware, we initialize the baudrate to 57600bps. This isn't a very good default on some powermacs where both the FW and pmac_zilog will default to 38400. This fixes it to use the same logic as pmac_zilog to pick a default speed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Show processor cache information in sysfsNathan Lynch
Collect cache information from the OF device tree and display it in the cpu hierarchy in sysfs. This is intended to be compatible at the userspace level with x86's implementation[1], hence some of the funny attribute names. The arrangement of cache info is not immediately intuitive, but (again) it's for compatibility's sake. The cache attributes exposed are: type (Data, Instruction, or Unified) level (1, 2, 3...) size coherency_line_size number_of_sets ways_of_associativity All of these can be derived on platforms that follow the OF PowerPC Processor binding. The code "publishes" only those attributes for which it is able to determine values; attributes for values which cannot be determined are not created at all. [1] arch/x86/kernel/cpu/intel_cacheinfo.c BenH: Turned some printk's into pr_debug, added better NULL checking in a couple of places. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Make core id information available to userspaceNathan Lynch
Existing Open Firmware practice is to report each processor core as a separate node in the device tree. Report the value of the "reg" OF property corresponding to a logical CPU's device node as the core_id attribute in /sys/devices/system/cpu/cpu*/topology/core_id. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Make core sibling information available to userspaceNathan Lynch
Implement the notion of "core siblings" for powerpc. This makes /sys/devices/system/cpu/cpu*/topology/core_siblings present sensible values, indicating online CPUs which share an L2 cache. BenH: Made cpu_to_l2cache() use of_find_node_by_phandle() instead of IBM-specific open coded search Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/vio: More fallout from dma_mapping_error API changeStephen Rothwell
arch/powerpc/kernel/vio.c:533: error: too few arguments to function 'dma_mapping_error' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/pseries: Fix CMO sysdev attribute API change falloutStephen Rothwell
Noticed due to these wanings: arch/powerpc/platforms/pseries/cmm.c:298: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:299: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:320: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:320: warning: initialization from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Enable tracehook for the architectureRoland McGrath
The powerpc arch code has all the prerequisites, so set HAVE_ARCH_TRACEHOOK. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Add TIF_NOTIFY_RESUME support for tracehookRoland McGrath
This adds TIF_NOTIFY_RESUME support for powerpc. When set, we call tracehook_notify_resume() on the way to user mode. This overloads do_signal() to do the work, but changes its arguments to it has the TIF_* bits handy in a register and drops the useless first argument that was always zero. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Make syscall tracing use tracehook.h helpersRoland McGrath
This changes powerpc syscall tracing to use the new tracehook.h entry points. There is no change, only cleanup. In addition, the assembly changes allow do_syscall_trace_enter() to abort the syscall without losing the information about the original r0 value. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Call tracehook_signal_handler() when setting up signal framesRoland McGrath
This makes the powerpc signal handling code call tracehook_signal_handler() after a handler is set up. This means that using PTRACE_SINGLESTEP to enter a signal handler will report to ptrace on the first instruction of the handler, instead of the second. This is consistent with what x86 and other machines do, and what users and debuggers want. BenH: Fixed up the test for the trap value. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Update cpu_sibling_maps dynamicallyNathan Lynch
Rather doing one initialization pass over all the per-cpu cpu_sibling_maps at boot, update the maps at cpu online/offline time. This is a behavior change -- the thread_siblings attribute now reflects only online siblings, whereas it would display offline siblings before. The new behavior matches that of x86, and is arguably more useful. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: register_cpu_online should be __cpuinitNathan Lynch
It is called only in cpu online paths. (caught by CONFIG_DEBUG_SECTION_MISMATCH=y) Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: kill useless SMT code in prom_hold_cpusNathan Lynch
This piece of code is broken for >2 threads, and possibly in some other subtle ways (such as comparing a value obtained from an "ibm,ppc-interrupt-server#s" property to a value obtained from a "reg" property) and doesn't seem to have any useful purpose in the first place other than a dubious warning in case NR_CPUS is too small, which probably isn't the right place to do so. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Fix vio build warningsNathan Lynch
arch/powerpc/kernel/vio.c:1034: warning: function declaration isn’t a prototype arch/powerpc/kernel/vio.c:1035: warning: function declaration isn’t a prototype Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc/booke: Clean up the hardware watchpoint supportKumar Gala
* CONFIG_BOOKE is selected by CONFIG_44x so we dont need both * Fixed a few comments * Go back to only using DBCR0_IDM to determine if we are using debug resources. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: Removed duplicated include in stacktrace.cHuang Weiyi
Removed duplicated include file <linux/module.h> in arch/powerpc/kernel/stacktrace.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28stop_machine: Wean existing callers off stop_machine_run()Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-27sparc: Set CONFIG_HAVE_ARCH_TRACEHOOKDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 03:54:19 +0000