aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2006-06-19[MIPS] APM emu supportRodolfo Giometti
Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] SN: Rename SGI_SN0_N_MODE -> SGI_SN_N_MODE.Ralf Baechle
It's not SN0-specific. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Cleanup ARCH_DISCONTIGMEM_ENABLE and NUMA configuration.Ralf Baechle
IP27 configuration isn't the only NUMA system - it just happens to be the currently only supported MIPS NUMA system. So move the necessary options back into the main MIPS Kconfig file. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] C99-ify struct resource initialization.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove duplicate declarations from Alchemy code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] arch/mips/au1000/time.c cleanupSergei Shtylyov
Mark au1xxx_timer_setup() __init, just because it is. Get rid of unneeded extern's (note that (*do_gettimeoffset)() is already declared by <asm/time.c>) and an unused variable. Kill some whitespace... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove unused instances of prom_build_cpu_map.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Qemu system shutdown supportThiemo Seufer
Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Unify mips_fpu_soft_struct and mips_fpu_hard_structs.Atsushi Nemoto
The struct mips_fpu_soft_struct and mips_fpu_hard_struct are completely same now and the kernel fpu emulator assumes that. This patch unifies them to mips_fpu_struct and get rid of mips_fpu_union. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Remove prototype for non-existing function.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Wind River 4KC PPMC Eval Board SupportMark.Zhan
Support for the GT-64120-based Wind River 4KC PPMC Evaluation board. Signed-off-by: Rongkai.Zhan <Rongkai.zhan@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Au1xxx: board specific irq code cleanupHerbert Valerio Riedel
Convert sizeof/sizeof use to use of ARRAY_SIZE macro, and annotate irqmap structures as __initdata. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP27: Fix collision with hardcoded interrupt number.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[PATCH] Fix BCM1480 doubled process accounting times.[MIPS] James E Wilson
Running a UP kernel on a bcm1480 board, I get nonsensical timing results, like this: release@unknown:~/tmp$ time ./a.out real 0m22.906s user 0m45.792s sys 0m0.010s According to my watch, this program took 23 seconds to run, so the real time clock is OK. It is process accounting that is broken. I tracked this down to a problem with the function bcm1480_timer_interrupt in the file sibyte/bcm1480/time.c. This function calls ll_timer_interrupt for cpu0, and ll_local_timer_interrupt for all cpus. However, both of these functions do process accounting. Thus processes running on cpu0 end up with doubled times. This is very obvious in a UP kernel where all processes run on cpu0. The correct way to do this is to only call ll_local_timer interrupt if this is not cpu0. This can be seen in the mips-board/generic/time.c file, and also in the sibyte/sb1250/time.c file, both of which handle this correctly. I fixed the bcm1480/time.c file by copying over the correct code from the sb1250/time.c file. With this fix, I now get sensible results. release@unknown:~/tmp$ time ./a.out real 0m22.903s user 0m22.894s sys 0m0.006s Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Mark PNX8550 support broken.Ralf Baechle
Broken in too many way for me to fix it for 2.6.17. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Fix optimization for size build.Ralf Baechle
It took a while longer than on other architectures but gcc has finally started to strike us as well ... This also fixes the damage by 6edfba1b33c701108717f4e036320fc39abe1912. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] IP22: Fix ISA driver builds if CONFIG_EISA is selected.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Cobalt: Fix undefined reference to disable_early_printk.Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Fix fpu_save_double on 64-bit.Atsushi Nemoto
> Without this fix, _save_fp() in 64-bit kernel is seriously broken. > > ffffffff8010bec0 <_save_fp>: > ffffffff8010bec0: 400d6000 mfc0 t1,c0_status > ffffffff8010bec4: 000c7140 sll t2,t0,0x5 > ffffffff8010bec8: 05c10011 bgez t2,ffffffff8010bf10 <_save_fp+0x50> > ffffffff8010becc: 00000000 nop > ffffffff8010bed0: f4810328 sdc1 $f1,808(a0) > ... Fix register usage in fpu_save_double() and make fpu_restore_double() more symmetric with fpu_save_double(). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MIPS] Malta: Handle byteswapping hardare bug in big endian mode.Elizabeth Oldham
The SOC-it system controller running in big endian mode might forget byteswapping when DMAing to the last word of physical memory. Fixed by ignoring the last page of memory. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[ARM] 3588/1: AT91RM9200 CSB337/637 board updateAndrew Victor
Patch from Andrew Victor This patch updates the support for the Cogent CSB337 and CSB637 boards. The changes include: 1. Use the new at91_uart_config structure and device registration functions for the UARTs. 2. Registration of I2C and SPI platform devices. 3. The CSB337 board uses PB0 & PB1 (and not PB2) for the LEDs. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3585/1: AT91RM9200 Platform devicesAndrew Victor
Patch from Andrew Victor This patch updates the platform device support for the AT91RM9200. The changes include: 1. USB Host device renamed to "at91_ohci" since the driver is also usable on the AT91SAM9261 processor. 2. Enabling multidrive on the USB Device's pullup pin should not be done for all boards. Moved into board-specific files. [Patch from David Brownell] 3. Move enabling of PCMCIA/Compact Flash pins out of the driver. 4. Added SPI device and resources. 5. Added Watchdog device and resources. [Patch from David Brownell] 6. Added UART device and resources. 7. The simple devices (watchdog, rtc, i2c) are now automatically registered and don't have to be registered separately in each board-specific file. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3577/1: netX: Default config for netx based boardsSascha Hauer
Patch from Sascha Hauer This patch adds the default config file for netx based boards. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3576/1: netX: board support for NXEB500HMI development boardSascha Hauer
Patch from Sascha Hauer This patch adds the board specific code for the Hilscher NXEB500HMI development board. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3575/1: netX: board support for NXDB500 development boardSascha Hauer
Patch from Sascha Hauer This patch adds the board specific code for the Hilscher NXDB500 development board. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3574/1: netX: board support for NXDKN development boardSascha Hauer
Patch from Sascha Hauer This patch adds the board specific code for the Hilscher NXDKN development board. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3569/2: netX: driver for XMAC/XPEC enginesSascha Hauer
Patch from Sascha Hauer The netX processors have generic network bitstream engines (XMAC/XPEC). This driver adds support for firmware loading and start, stop, reset commands. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3568/2: netX: pointer fifo driverSascha Hauer
Patch from Sascha Hauer This patch adds support for the pointer FIFOs on netX. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3567/2: arm: base support for Hilscher netXSascha Hauer
Patch from Sascha Hauer This patch adds the base support for Hilscher's netX network processors. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3584/1: AT91RM9200 GPIO suspend/resume supportAndrew Victor
Patch from Andrew Victor This patch adds suspend/resume/set_wake support for the AT91RM9200's GPIO interrupts. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3583/1: AT91RM9200 IRQ suspend/resume supportAndrew Victor
Patch from Andrew Victor Added suspend/resume/set_wake support for the AT91RM9200's AIC interrupt controller. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3582/1: AT91RM9200 IRQ trigger typesAndrew Victor
Patch from Andrew Victor The AIC interrupt controller's set_irq_type() can also be used for internal interrupts. IRQT_LOW and IRQT_FALLING are the only options not supported for the internal interrupts. [Original patch from Karl Olsen] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3581/1: AT91RM9200 Internal SRAMAndrew Victor
Patch from Andrew Victor This patch maps the AT91RM9200's internal SRAM into the virtual memory address space - just below the internal peripheral registers. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3580/1: AT91RM9200 Timer suspend/resume supportAndrew Victor
Patch from Andrew Victor Added suspend/resume support for the AT91RM9200 timer. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3579/1: AT91RM9200 Timer simplificationAndrew Victor
Patch from Andrew Victor Use a global variable 'last_crtr' to store the time of the last timer tick instead of the ST_RTAR register. It's faster, frees up the ST_RTAR register for other uses, and hopefully makes the code more understandable. [Patch from Peter Menzebach] Also add the SA_TIMER flag to Timer IRQ. (It seems to be required for the realtime preempt patch). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3572/1: netX: framebuffer driver for Hilscher netXSascha Hauer
Patch from Sascha Hauer This patch adds framebuffer support for Hilscher's netX network processors. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3578/1: AT91RM9200 Clock updateAndrew Victor
Patch from Andrew Victor Some updates to the clock infrastructure for the AT91RM9200. 1. Hard-coded values replaced with names defined in at91rm9200_sys.h. 2. Added the four PIO clocks, which are enabled at startup. 3. At startup, disable all unused clocks. 4. Minor bugfix for usage counts associated with MCK. [Patch from David Brownell] 5. Added at91_clock_associate() function to associate device & function with a particular clock. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3559/1: S3C2442: core and serial portBen Dooks
Patch from Ben Dooks Core support for the Samsung S3C2442, and the serial port driver update to allow the serial port blocks to be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3557/1: S3C24XX: centralise and cleanup uart registrationBen Dooks
Patch from Ben Dooks All the S3C24XX based devices currently have similar uart blocks, in the same location. Make the process of adding new uart blocks easier by commonising the device definitions and adding a new init function for the cpu code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3558/1: SMDK24XX: LED platform devicesBen Dooks
Patch from Ben Dooks Platform devices for the LEDs on all the SMDK24XX boards Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3534/1: add spi support to lubbock platformDavid Brownell
Patch from David Brownell This adds the platform device for SSP/SPI controller, and declares the ads7846 device hooked up to it. Not all Lubbock boards appear to populate the connector needed to use this instead of the ucb1400 chip, but it can always be used as a temperature sensor. In short, this is probably most useful as an example of how to provide the configuration data used by the pxa2xx_spi driver. (Last tested against a slightly earlier version of that driver.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3554/1: ARM: Fix dyntick lockingTony Lindgren
Patch from Tony Lindgren This patch fixes some dyntick locking issues on ARM as pointed out by Russell King. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3553/1: S3C24XX: earlier print of cpu idcode infoBen Dooks
Patch from Ben Dooks Move the printk of the CPU information and IDCODE before the checking of the table entry validity to aide in debugging new cpu entries. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGHBen Dooks
Patch from Ben Dooks If CONFIG_CPU_DCACHE_WRITETHOUGH is set, then the S3C24XX PM code fails to compile, as there is no need to flush the D-cache, the flush function arm920_flush_kern_cache_all() is not compiled. Fix the code to not use this if the config is set. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3550/1: OSIRIS: fix serial port map for 1:1Ben Dooks
Patch from Ben Dooks The default serial port-mapping for the Osiris has the port 2 mapped onto the first serial port, and no port1. Correct this so port 1 is port. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.SCatalin Marinas
Patch from Catalin Marinas This code was still using the old format for the ARMv6 CPU id and it wasn't flushing the caches on the MPCore CPU (and other ARM1176 cores). The patch changes the mask bits to cope with the new id format. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3335/1: Old-abi Thumb sys_syscall brokenPaul Brook
Patch from Paul Brook The old-abi sys_syscall syscall is broken when called from Thumb mode. It assumes the syscall number is an Arm syscall number (ie. starts from __NR_OABI_SYSCALL_BASE). In thumb mode syscall numbers start from zero. The patch below fixes this by clearing the nigh bits of the syscall number instead of inverting them. Technically this means we accept some invalid syscall numbers, but I can't see how that could be a problem. The two sets of numbers far apart that unimplemented syscalls should still be rejected. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfigVitaly Wool
Patch from Vitaly Wool This patch adds default configuration file PNX4008 ARM platform. It\'s basically the same as the previos one. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip supportVitaly Wool
Patch from Vitaly Wool This patch adds basic chip support for PNX4008 ARM platform. It's basically the same as the previous one, but with the rmk's comments taken into account. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3405/1: lpd7a40x: CPLD ssp driverMarc Singer
Patch from Marc Singer Driver for operating SSP devices through LPD7A40X CPLD chip. This driver is used by the audio codecs. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>