aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-02-08Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (116 commits) [POWERPC] Add export of vgacon_remap_base [POWERPC] Remove bogus comment about page_is_ram [POWERPC] windfarm: don't die on suspend thread signal [POWERPC] Fix comment in kernel/irq.c [POWERPC] ppc: Fix booke watchdog initialization [POWERPC] PPC: Use ARRAY_SIZE macro when appropriate [POWERPC] Use ARRAY_SIZE macro when appropriate [POWERPC] Fix ppc64's writing to struct file_operations [POWERPC] ppc: use syslog macro for the printk log level [POWERPC] ppc: cs4218_tdm remove extra brace [POWERPC] Add mpc52xx/lite5200 PCI support [POWERPC] Only use H_BULK_REMOVE if the firmware supports it [POWERPC] Fixup error handling when emulating a floating point instruction [POWERPC] Enable interrupts if we are doing fp math emulation [POWERPC] Added kprobes support to ppc32 [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace [POWERPC] Fix performance monitor exception [POWERPC] Compile fixes for arch/powerpc dcr code [POWERPC] Maple: use mmio nvram ...
2007-02-08[POWERPC] Add export of vgacon_remap_baseMathieu Desnoyers
The following macro : include/asm-powerpc/vga.h:#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) is used by drivers/video/console/vgacon.c which can be compiled as a module (drivers/video/vga16fb.ko). Therefore, vgacon_remap_base should be exported. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] Remove bogus comment about page_is_ramJohannes Berg
arch/powerpc/mm/mem.c states that page_is_ram is called by the code that implements /dev/mem, which isn't true. Remove the comment. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] Fix comment in kernel/irq.cJohannes Berg
kernel/irq.c contains a comment that speaks of -1 and -2 as interrupt numbers, but this is actually dependent on configuration options now. Replace by NO_IRQ and NO_IRQ_ENABLED. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] PPC: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] Fix ppc64's writing to struct file_operationsStephen Rothwell
In preparation for marking file_operations as const. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] ppc: use syslog macro for the printk log levelRobert P. J. Day
Use the appropriate logging macro for the priority level for that printk call. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] ppc: cs4218_tdm remove extra braceMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] Add mpc52xx/lite5200 PCI supportGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08Merge branch 'for_paulus' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.21
2007-02-08[POWERPC] Only use H_BULK_REMOVE if the firmware supports itPaul Mackerras
The previous patch changing pSeries to use H_BULK_REMOVE broke the JS20 blade, where the firmware doesn't support H_BULK_REMOVE. This adds a firmware check so that on machines that don't have H_BULK_REMOVE, we just use the H_REMOVE call as before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (41 commits) Revert "PCI: remove duplicate device id from ata_piix" msi: Make MSI useable more architectures msi: Kill the msi_desc array. msi: Remove attach_msi_entry. msi: Fix msi_remove_pci_irq_vectors. msi: Remove msi_lock. msi: Kill msi_lookup_irq MSI: Combine pci_(save|restore)_msi/msix_state MSI: Remove pci_scan_msi_device() MSI: Replace pci_msi_quirk with calls to pci_no_msi() PCI: remove duplicate device id from ipr PCI: remove duplicate device id from ata_piix PCI: power management: remove noise on non-manageable hw PCI: cleanup MSI code PCI: make isa_bridge Alpha-only PCI: remove quirk_sis_96x_compatible() PCI: Speed up the Intel SMBus unhiding quirk PCI Quirk: 1k I/O space IOBL_ADR fix on P64H2 shpchp: delete trailing whitespace shpchp: remove DBG_XXX_ROUTINE ...
2007-02-07Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (70 commits) USB: remove duplicate device id from zc0301 USB: remove duplicate device id from usb_storage USB: remove duplicate device id from keyspan USB: remove duplicate device id from ftdi_sio USB: remove duplicate device id from visor USB: a bit more coding style cleanup usbcore: trivial whitespace fixes usb-storage: use first bulk endpoints, not last EHCI: fix interrupt-driven remote wakeup USB: switch ehci-hcd to new polling scheme USB: autosuspend for usb printer driver USB Input: Added kernel module to support all GTCO CalComp USB InterWrite School products USB: Sierra Wireless auto set D0 USB: usb ethernet gadget recognizes HUSB2DEV USB: list atmel husb2_udc gadget controller USB: gadgetfs AIO tweaks USB: gadgetfs behaves better on userspace init bug USB: gadgetfs race fix USB: gadgetfs simplifications USB: gadgetfs cleanups ...
2007-02-07msi: Make MSI useable more architecturesEric W. Biederman
The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now responsible for allocating and freeing the linux irq in addition to setting up the the linux irq to work with the interrupt. arch_setup_msi_irq now takes a pci_device and a msi_desc and returns an irq. With this change in place this code should be useable by all platforms except those that won't let the OS touch the hardware like ppc RTAS. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07msi: Kill the msi_desc array.Eric W. Biederman
We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07MSI: Remove pci_scan_msi_device()Michael Ellerman
pci_scan_msi_device() doesn't do anything anymore, so remove it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07PCI: make isa_bridge Alpha-onlyAdrian Bunk
Since isa_bridge is neither assigned any value !NULL nor used on !Alpha, there's no reason for providing it. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ps3 ohci bus glueGeoff Levand
USB OHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ps3 ehci bus glueGeoff Levand
USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits) ACPICA: reduce table header messages to fit within 80 columns asus-laptop: merge with ACPICA table update ACPI: bay: Convert ACPI Bay driver to be compatible with sysfs update. ACPI: bay: new driver is EXPERIMENTAL ACPI: bay: make drive_bays static ACPI: bay: make bay a platform driver ACPI: bay: remove prototype procfs code ACPI: bay: delete unused variable ACPI: bay: new driver adding removable drive bay support ACPI: dock: check if parent is on dock ACPICA: fix gcc build warnings Altix: Add ACPI SSDT PCI device support (hotplug) Altix: ACPI SSDT PCI device support ACPICA: reduce conflicts with Altix patch series ACPI_NUMA: fix HP IA64 simulator issue with extended memory domain ACPI: fix HP RX2600 IA64 boot ACPI: build fix for IBM x440 - CONFIG_X86_SUMMIT ACPICA: Update version to 20070126 ACPICA: Fix for incorrect parameter passed to AcpiTbDeleteTable during table load. ACPICA: Update copyright to 2007. ...
2007-02-07[POWERPC] Fixup error handling when emulating a floating point instructionKumar Gala
When we do full FP emulation its possible that we need to post a SIGFPE based on the results of the emulation. The previous code ignored this case completely. Additionally, the Soft_emulate_8xx case had two issues. One, we should never generate a SIGFPE since the code only does data movement. Second, we were interpreting the return codes incorrectly, it returns 0 on success, 1 on illop and -EFAULT on a data access error. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-07[POWERPC] Enable interrupts if we are doing fp math emulationKumar Gala
Anytime we are emulating an instruction we are going to be doing some form of get_user() to get the instruction image to decode. Since get_user() might sleep we need to ensure we have interrupts enabled or we might see something like: Debug: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:697 in_atomic():0, irqs_disabled():1 Call Trace: [D6023EB0] [C0007F84] show_stack+0x58/0x174 (unreliable) [D6023EE0] [C0022C34] __might_sleep+0xbc/0xd0 [D6023EF0] [C000D158] program_check_exception+0x1d8/0x4fc [D6023F40] [C000E744] ret_from_except_full+0x0/0x4c --- Exception: 700 at 0x102a7100 LR = 0xdb9ef04 However, we want to ensure that interrupts are disabled when handling a trap exception that might be used for a kernel breakpoint. This is why ProgramCheck is marked as EXC_XFER_STD instead of EXC_XFER_EE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-06[POWERPC] Added kprobes support to ppc32Kumar Gala
Added kprobes to ppc32 platforms that have use single_step_exception. This excludes 4xx and anything Book-E since their debug mechanisms for single stepping are completely different. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-07Merge branch 'linux-2.6'Paul Mackerras
2007-02-07[POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor callPaul Mackerras
H_BULK_REMOVE lets us remove 4 entries from the MMU hash table with one hypervisor call. This uses it in pSeries_lpar_hpte_invalidate so we can tear down mappings with fewer hypervisor calls. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspacePaul Mackerras
Some instruction tracing tools use the RI (recoverable interrupt) bit in the MSR to indicate when it's safe to single-step. Currently we clear RI after restoring r13 when returning to userspace. However, if we single-step past the point where r13 is restored, we'll corrupt r13 in the exception entry code and not restore it. This moves the clearing of RI to just before r13 is restored so this doesn't happen. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Fix performance monitor exceptionLivio Soares
To the issue: some point during 2.6.20 development, Paul Mackerras introduced the "lazy IRQ disabling" patch (very cool work, BTW). In that patch, the performance monitor unit exception was marked as "maskable", in the sense that if interrupts were soft-disabled, that exception could be ignored. This broke my PowerPC profiling code. The symptom that I see is that a varying number of interrupts (from 0 to $n$, typically closer to 0) get delivered, when, in reality, it should always be very close to $n$. The issue stems from the way masking is being done. Masking in this fashion seems to work well with the decrementer and external interrupts, because they are raised again until "really" handled. For the PMU, however, this does not apply (at least on my Xserver machine with a 970FX processor). If the PMU exception is not handled, it will _not_ be re-raised (at least on my machine). The documentation states that the PMXE bit in MMCR0 is set to 0 when the PMU exception is raised. However, software must re-set the bit to re-enable PMU exceptions. If the exception is ignored (as currently) not only is that interrupt lost, but because software does not re-set PMXE, the PMU registers are "frozen" forever. [This patch means that performance monitor exceptions are taken and handled even if irqs are off, as long as some other interrupt hasn't come along and caused interrupts to be hard-disabled. In this sense the PMU exception becomes like an NMI. The oprofile code for most powerpc processors does nothing that is unsafe in an NMI context, but the Cell oprofile code does a spin_lock_irqsave. However, that turns out to be OK because Cell doesn't actually use the performance monitor exception; performance monitor interrupts come in as a regular interrupt on Cell, so will be disabled when irqs are off. -- paulus.] Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Compile fixes for arch/powerpc dcr codeDavid Gibson
The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Maple: use mmio nvramNathan Lynch
Some systems supported by the maple platform (e.g. JS2x blades running SLOF) are able to use the mmio_nvram backend for reading and writing nvram. This is an improvement over the current situation -- no nvram access from userspace at all. Select MMIO_NVRAM for the maple platform. Initialize the mmio_nvram backend from maple setup code. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: defconfigOlof Johansson
Base pasemi defconfig. Nothing special, just the native drivers plus common PCI-express/PCI cards. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: iommu supportOlof Johansson
I/O TLB support for PA6T-1682M. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: Configure DMA controller interruptsOlof Johansson
The DMA controller on PWRficient is somewhat special -- has a PCI header so it looks like it's on the root PCI (-Express) root bus, but it uses more than the default number of interrupts (and they are hardwired). We need to wire up all interrupts for the DMA controller. The generic IRQ code will only map the primary interrupt from the PCI header (128), so add 129->211 by hand. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: SMP timebase syncOlof Johansson
Timebase update is simple on PA6T, since global updates can be done from one core by writing to an SPR. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: Implement restartOlof Johansson
Implement reset on platforms/pasemi. Default is just to reset the cpu using the SDC registers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: Idle loopsOlof Johansson
Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: Machine check handlerOlof Johansson
Print out decoded machine check information on PA6T. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] pasemi: UART udbg supportOlof Johansson
Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Assign all PCI busses on G3 Blue & WhitePavel Roskin
G3 Blue & White is misconfigured by default so that CardBus controllers in PCI slots don't work. The PCI bridge is programmed to only allow access to bus 1 but not higher busses. The patch forces the PCI busses to be reassigned if a Grackle controller is found and the machine identifies itself as "PowerMac1,1" Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: add celleb_defconfigIshizaki Kou
This patch creates defconfig file for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: basic supportIshizaki Kou
This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: support spu priv1 opsIshizaki Kou
SPU support routines for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: consolidate spu management opsIshizaki Kou
Spu management ops in arch/platforms/cell/spu_priv1_mmio.h can be used commonly in of based platform. This patch separates spu management ops from native cell code and uses on celleb platform. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: support udbgIshizaki Kou
This patch adds udbg support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: htab routinesIshizaki Kou
Adds htab routines for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: support iommuIshizaki Kou
This patch creates Celleb platform dependent file to support iommu. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: setup usb host controller in SCCIshizaki Kou
USB host controller in SCC requires enable sequence. It should be done before USB host drivers start. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: support interruptsIshizaki Kou
This patch creates Celleb platform dependent files to support interrupts. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: interfaces to the hypervisorIshizaki Kou
This patch creates Celleb platform dependent files which add interfaces to call hypervisor. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] powermac: local_irq_disable() is redundant after local_irq_save()Jiri Kosina
arch/powerpc/platforms/powermac/smp.c::smp_core99_kick_cpu() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Paul Mackerras <paulus@samba.org>