aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-10-16Consolidate PTRACE_DETACHAlexey Dobriyan
Identical handlers of PTRACE_DETACH go into ptrace_request(). Not touching compat code. Not touching archs that don't call ptrace_request. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
2007-10-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: use full RCU API Input: remove tsdev interface Input: add support for Blackfin BF54x Keypad controller Input: appletouch - another fix for idle reset logic HWMON: hdaps - switch to using input-polldev Input: add support for SEGA Dreamcast keyboard Input: omap-keyboard - don't pretend we support changing keymap Input: lifebook - fix X and Y axis range Input: usbtouchscreen - add support for GeneralTouch devices Input: fix open count handling in input interfaces Input: keyboard - add CapsShift lock Input: adbhid - produce all CapsLock key events Input: ALPS - add signature for ThinkPad R61 Input: jornada720_kbd - send MSC_SCAN events Input: add support for the HP Jornada 7xx (710/720/728) touchscreen Input: add support for HP Jornada 7xx onboard keyboard Input: add support for HP Jornada onboard keyboard (HP6XX) Input: ucb1400_ts - use schedule_timeout_uninterruptible Input: xpad - fix dependancy on LEDS class Input: auto-select INPUT for MAC_EMUMOUSEBTN option ... Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from a class device to a device and converting to use input-polldev created a few apparently trivial clashes..
2007-10-15Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (35 commits) xen-netfront: rearrange netfront structure to separate tx and rx netdev: convert non-obvious instances to use ARRAY_SIZE() ucc_geth: Fix build break introduced by commit 09f75cd7bf13720738e6a196cc0107ce9a5bd5a0 gianfar: Fix regression caused by new napi interface gianfar: Cleanup compile warning caused by 0795af57 gianfar: Fix compile regression caused by bea3348e add new prom.h for AU1x00 update AU1000 get_ethernet_addr() MIPSsim: General cleanup Jazzsonic: Fix warning about unused variable. Remove msic_dcr_read() in axon_msi.c Use dcr_host_t.base in dcr_unmap() Add dcr_host_t.base in dcr_read()/dcr_write() Use dcr_host_t.base in ibm_emac_mal Update ibm_newemac to use dcr_host_t.base tehuti: possible leak in bdx_probe TC35815: Fix build SAA9730: Fix build AR7 ethernet myri10ge: update driver version to 1.3.2-1.287 ...
2007-10-15Atari keyboard: incorporate additional review commentsGeert Uytterhoeven
Atari keyboard: incorporate additional review comments: o Kill reference to source file name o Return error value from input_register_device() instead of -ENOMEM Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15add new prom.h for AU1x00Yoichi Yuasa
Add new prom.h for AU1x00. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15update AU1000 get_ethernet_addr()Yoichi Yuasa
Update AU1000 get_ethernet_addr(). Three functions were brought together in one. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Remove msic_dcr_read() in axon_msi.cMichael Ellerman
msic_dcr_read() doesn't really do anything useful, just replace it with direct calls to dcr_read(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Use dcr_host_t.base in dcr_unmap()Michael Ellerman
With the base stored in dcr_host_t, there's no need for callers to pass the dcr_n into dcr_unmap(). In fact this removes the possibility of them passing the incorrect value, which would then be iounmap()'ed. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Add dcr_host_t.base in dcr_read()/dcr_write()Michael Ellerman
Now that all users of dcr_read()/dcr_write() add the dcr_host_t.base, we can save them the trouble and do it in dcr_read()/dcr_write(). As some background to why we just went through all this jiggery-pokery, benh sayeth: Initially the goal of the dcr_read/dcr_write routines was to operate like mfdcr/mtdcr which take absolute DCR numbers. The reason is that on 4xx hardware, indirect DCR access is a pain (goes through a table of instructions) and it's useful to have the compiler resolve an absolute DCR inline. We decided that wasn't worth the API bastardisation since most places where absolute DCR values are used are low level 4xx-only code which may as well continue using mfdcr/mtdcr, while the new API is designed for device "instances" that can exist on 4xx and Axon type platforms and may be located at variable DCR offsets. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Merge branch 'pxa' into develRussell King
2007-10-15[ARM] 4577/1: ITE 8152 PCI bridge supportMike Rapoport
This patch provides driver for ITE 8152 PCI bridge. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] 4576/1: CM-X270 machine supportMike Rapoport
This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()Russell King
pxa_gpio_mode() is a universal call that fiddles with the GAFR (gpio alternate function register.) GAFR does not exist on PXA3 CPUs, but instead the alternate functions are controlled via the MFP support code. Platforms are expected to configure the MFP according to their needs in their platform support code rather than drivers. We extend this idea to the GAFR, and make the gpio_direction_*() functions purely operate on the GPIO level. This means platform support code is entirely responsible for configuring the GPIOs alternate functions on all PXA CPU types. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: PXA3xx base supporteric miao
Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: tidy up arch/arm/mach-pxa/MakefileRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15Merge branch 'v2.6.24-lockdep' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: annotate dir vs file i_mutex lockdep: per filesystem inode lock class lockdep: annotate kprobes irq fiddling lockdep: annotate rcu_read_{,un}lock{,_bh} lockdep: annotate journal_start() lockdep: s390: connect the sysexit hook lockdep: x86_64: connect the sysexit hook lockdep: i386: connect the sysexit hook lockdep: syscall exit check lockdep: fixup mutex annotations lockdep: fix mismatched lockdep_depth/curr_chain_hash lockdep: Avoid /proc/lockdep & lock_stat infinite output lockdep: maintainers
2007-10-15Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] update sn2_defconfig [IA64] Fix kernel hangup in kdump on INIT [IA64] Fix kernel panic in kdump on INIT [IA64] Remove vector from ia64_machine_kexec() [IA64] Fix race when multiple cpus go through MCA [IA64] Remove needless delay in MCA rendezvous [IA64] add driver for ACPI methods to call native firmware [IA64] abstract SAL_CALL wrapper to allow other firmware entry points [IA64] perfmon: Remove exit_pfm_fs() [IA64] tree-wide: Misc __cpu{initdata, init, exit} annotations
2007-10-15[IA64] update sn2_defconfigJes Sorensen
Update defonfig file for sn2 to match recent changes in config options. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: (140 commits) sched: sync wakeups preempt too sched: affine sync wakeups sched: guest CPU accounting: maintain guest state in KVM sched: guest CPU accounting: maintain stats in account_system_time() sched: guest CPU accounting: add guest-CPU /proc/<pid>/stat fields sched: guest CPU accounting: add guest-CPU /proc/stat field sched: domain sysctl fixes: add terminator comment sched: domain sysctl fixes: do not crash on allocation failure sched: domain sysctl fixes: unregister the sysctl table before domains sched: domain sysctl fixes: use for_each_online_cpu() sched: domain sysctl fixes: use kcalloc() Make scheduler debug file operations const sched: enable wake-idle on CONFIG_SCHED_MC=y sched: reintroduce topology.h tunings sched: allow the immediate migration of cache-cold tasks sched: debug, improve migration statistics sched: debug: increase width of debug line sched: activate task_hot() only on fair-scheduled tasks sched: reintroduce cache-hot affinity sched: speed up context-switches a bit ...
2007-10-15Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits) [SCSI] gdth: fix CONFIG_ISA build failure [SCSI] esp_scsi: remove __dev{init,exit} [SCSI] gdth: !use_sg cleanup and use of scsi accessors [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2 [SCSI] gdth: Setup proper per-command private data [SCSI] gdth: Remove gdth_ctr_tab[] [SCSI] gdth: switch to modern scsi host registration [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes [SCSI] gdth: clean up host private data [SCSI] gdth: Remove virt hosts [SCSI] gdth: Reorder scsi_host_template intitializers [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers [SCSI] gdth: Remove 2.4.x support, in-kernel changelog [SCSI] gdth: split out pci probing [SCSI] gdth: split out eisa probing [SCSI] gdth: split out isa probing gdth: Make one abuse of scsi_cmnd less obvious [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE ...
2007-10-15PS3 system bus add_uevent_var() falloutGeert Uytterhoeven
Kill unused variables Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15sched: x86: allow single-depth wchan outputIngo Molnar
sched.o gets smaller and faster if we compile it with -fomit-frame-pointers, so make this a config option. The cost is the loss of multi-depth wchan lookups - but SysRq-T is a sufficient replacement for them anyway, so their utility is much lower these days. the size difference is significant: text data bss dec hex filename 34005 3462 24 37491 9273 sched.o.before 33470 3462 24 36956 905c sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mike Galbraith <efault@gmx.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-14x86: force timer broadcast on late AMD C1E detectionThomas Gleixner
The 64bit SMP bootup is slightly different to the 32bit one. It enables the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E systems have the C1E feature flag only set in the secondary CPU. Due to the early enable of the boot CPU local APIC timer the APIC timer is registered as a fully functional device. When we detect the wreckage during the bringup of the secondary CPU, we need to force the boot CPU into broadcast mode. Check the C1E caused APIC timer disable, when the secondary APIC timer is initialized. If the boot CPU APIC timer was registered as a functional clock event device, then fix this up and utilize the CLOCK_EVT_NOTIFY_BROADCAST_FORCE mechanism to force the already registered boot CPU APIC timer into broadcast mode. Tested by force injecting the failure mode. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-14x86: move local APIC timer init to the end of start_secondary()Thomas Gleixner
Preparatory patch for the AMD C1E wreckage fixup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-14x86: fix missing include for vsyscallDave Jones
> Maybe I just picked a bad time to try, but... > > arch/x86/kernel/alternative.c: In function 'apply_alternatives': > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_START' undeclared (first use in this function) > arch/x86/kernel/alternative.c:191: error: (Each undeclared identifier is reported only once > arch/x86/kernel/alternative.c:191: error: for each function it appears in.) > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_END' undeclared (first use in this function) > make[1]: *** [arch/x86/kernel/alternative.o] Error 1 > make: *** [arch/x86/kernel] Error 2 Try this. Include missing header for vsyscall. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-14long vs. unsigned long - low-hanging fruits in driversAl Viro
deal with signedness of the stuff passed to set_bit() et.al. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (23 commits) [SPARC64]: virt_to_real_irq_table --> virt_irq_table [SPARC64]: virt_irq --> bucket mapping no longer necessary [SPARC64]: Kill ugly __bucket() macro. [SPARC64]: Kill ugly __irq_ino() macro. [SPARC64]: Only use bypass accesses to INO buckets. [SPARC64]: Update defconfig. [SPARC64]: Use sun4v VIRQ interfaces as intended. [SPARC64]: Allocate ivector_table dynamically. [SPARC64]: Access ivector_table[] using physical addresses. [SPARC64]: Make IVEC pointers 64-bit. [SPARC64]: Fix register usage in xor_raid_4(). [SPARC64]: Kill pci_memspace_mask. [SPARC64]: Consolidate MSI support code. [SPARC/64]: Move of_platform_driver initialisations: arch/sparc{,64}. [SPARC64]: Fix bugs in SYSV IPC handling in 64-bit processes. [SPARC/64]: Prepare to remove of_platform_driver name. [SPARC32]: Add irqflags.h to sparc32 and use it from generic code. [SPARC64]: beautify vmlinux.lds [SPARC]: beautify vmlinux.lds [SPARC64]: Enable MSI on sun4u Fire PCI-E controllers. ...
2007-10-14Lite5200 shouldn't mess with ROOT_DEVGrant Likely
There is no good reason for board platform code to mess with the ROOT_DEV. Remove it from all in-tree platforms except powermac This is a follow on to commit 745e1027751acbc1f14f8bbef378b491242b9c83. The original patch had this change to lite5200.c, but it got dropped in the psycho madness that is the 2.6.24 merge window. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13[SPARC64]: virt_to_real_irq_table --> virt_irq_tableDavid S. Miller
It no longer translates to "real irqs" (aka. INO buckets) so reflect that by using a simpler name for it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: virt_irq --> bucket mapping no longer necessaryDavid S. Miller
We used to need this to compute virt_irq --> ino, but that is no longer necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Kill ugly __bucket() macro.David S. Miller
All the users go through virt_irq_to_bucket() and essentially want to go from a virt_irq to an INO, but we have a way to do that already via virt_to_real_irq_table[].dev_ino. This also allows us to kill both virt_to_real_irq() and virt_irq_to_bucket(). Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Kill ugly __irq_ino() macro.David S. Miller
We have a place to stick INO information in the virt_to_real_irq_table[], which is currently only used for VIRQs. And that is readily accessible from the one __irq_ino() call site. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Only use bypass accesses to INO buckets.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Update defconfig.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Use sun4v VIRQ interfaces as intended.David S. Miller
We were simply concatenating the devhandle and devino and using that as the cookie, which defeats the entire purpose of the VIRQ hypervisor interfaces. Now that we use physical addresses for the INO buckets, we can allocate them dynamically for VIRQs and encode the cookies as ~__pa(bucket). This allows us to test for and decode the cookie with a simple: brlz $reg1, 1f xnor $reg1, %g0, $reg2 sequence. This works because bit 64 is never set in traditional INO vectors, and it is also never set in a physical address. So xnor'ing the physical address of the bucket always gives us a negative number, and thus a unique condition we can test cheaply. Inspired by ideas from Greg Onufer. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Allocate ivector_table dynamically.David S. Miller
Shrinks kernel by 16K compared to before the IVEC physical address changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Access ivector_table[] using physical addresses.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Make IVEC pointers 64-bit.David S. Miller
Currently we chain IVEC entries using 32-bit "pointers" because we know that the ivector_table is in the main kernel image, thus below 4GB. This uses proper 64-bit pointers instead. Whilst this bloats up the kernel image size, this sets the infrastructure necessary to significantly shrink the kernel size by using physical addresses and dynamically allocating the ivector table. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Fix register usage in xor_raid_4().David S. Miller
Some typos led to using %i6/%i7 instead of %l6/%l7 in loads which is really really bad because those are the frame pointer and return PC. Based upon a raid5 crash report by Bertrand Joel. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Kill pci_memspace_mask.David S. Miller
It is totally unnecessary as the needed information is properly encoded in the resources. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Consolidate MSI support code.David S. Miller
This also makes us use the MSI queues correctly. Each MSI queue is serviced by a normal sun4u/sun4v INO interrupt handler. This handler runs the MSI queue and dispatches the virtual interrupts indicated by arriving MSIs in that MSI queue. All of the common logic is placed in pci_msi.c, with callbacks to handle the PCI controller specific aspects of the operations. This common infrastructure will make it much easier to add MSG support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC/64]: Move of_platform_driver initialisations: arch/sparc{,64}.Stephen Rothwell
We no longer initialise the name field of the of_platform_driver, but use the name field of the embedded device_driver's name field instead. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: Fix bugs in SYSV IPC handling in 64-bit processes.David S. Miller
Thanks to Tom Callaway for the excellent bug report and test case. sys_ipc() has several problems, most to due with semaphore call handling: 1) 'err' return should be a 'long' 2) "union semun" is passed in a register on 64-bit compared to 32-bit which provides it on the stack and therefore by reference 3) Second and third arguments to SEMCTL are swapped compared to 32-bit. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC/64]: Prepare to remove of_platform_driver name.Stephen Rothwell
The name field of of_platform_driver is just copied into the included device_driver. By not overriding an already initialised device_driver name, we can convert the drivers over time to stop using the of_platform_driver name. Also we were not copying the owner field from of_platform_driver, so do the same with it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC32]: Add irqflags.h to sparc32 and use it from generic code.Robert Reif
Added asm-sparc/irqflags.h and moved irq related code from system.h to it. Renamed local_irq functions to raw_local_irq in irq.c. Modified system.h to include linux/irqflags.h which includes asm/irqflags.h. Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug. This is the first step in adding IRQ-flags state tracing as outlined in Documentation/irqflags-tracing.txt. These changes should be harmless because they just move things around and rename them. The next step is making the lowlevel entry code modifications which to be honest are beyond my capabilities at this point. Boot tested on an ss20 running an SMP kernel. Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC64]: beautify vmlinux.ldsSam Ravnborg
Apply a consistent format to vmlinux.lds. The file is now to some degree readable. In addition move several labels inside the braces such that they reflect the actual start address of a section. Without this the label would not reflect if ld added alignment. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13[SPARC]: beautify vmlinux.ldsSam Ravnborg
Make vmlinux.lds almost readable. When going through the file fixed the following: - Use PAGE_SIZE as replacement for hardcoded 4096 - Moves label definitions inside {} to avoid ld alignment that may be added between label and section Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>