aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-12-08x86: fix default_spin_lock_flags() prototypeIngo Molnar
these warnings: arch/x86/kernel/paravirt-spinlocks.c: In function ‘default_spin_lock_flags’: arch/x86/kernel/paravirt-spinlocks.c:12: warning: passing argument 1 of ‘__raw_spin_lock’ from incompatible pointer type arch/x86/kernel/paravirt-spinlocks.c: At top level: arch/x86/kernel/paravirt-spinlocks.c:11: warning: ‘default_spin_lock_flags’ defined but not used showed that the prototype of default_spin_lock_flags() was confused about what type spinlocks have. the proper type on UP is raw_spinlock_t. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08AMD IOMMU: __unmap_single: check for bad_dma_address instead of 0Joerg Roedel
Impact: minor fix Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-08AMD IOMMU: fix WARN_ON in dma_ops unmap pathJoerg Roedel
Impact: minor fix Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-08AMD IOMMU: fix typo in commentJoerg Roedel
Impact: cleanup Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-08AMD IOMMU: fix loop counter in free_pagetable functionJoerg Roedel
Impact: bugfix Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-08AMD IOMMU: fix iommu_map_page functionJoerg Roedel
Impact: bugfix in iommu_map_page function Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-12-07[ARM] Fix alignment fault handling for ARMv6 and later CPUsRussell King
On ARMv6 and later CPUs, it is possible for userspace processes to get stuck on a misaligned load or store due to the "ignore fault" setting; unlike previous CPUs, retrying the instruction without the 'A' bit set does not always cause the load to succeed. We have no real option but to default to fixing up alignment faults on these CPUs, and having the CPU fix up those misaligned accesses which it can. Reported-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-06[ARM] 5340/1: fix stack placement after noexecstack changesLennert Buytenhek
Commit 8ec53663d2698076468b3e1edc4e1b418bd54de3 ("[ARM] Improve non-executable support") added support for detecting non-executable stack binaries. One of the things it does is to make READ_IMPLIES_EXEC be set in ->personality if we are running on a CPU that doesn't support the XN ("Execute Never") page table bit or if we are running a binary that needs an executable stack. This exposed a latent bug in ARM's asm/processor.h due to which we'll end up placing the stack at a very low address, where it will bump into the heap on any application that uses significant amount of stack or heap or both, causing many interesting crashes. Fix this by testing the ADDR_LIMIT_32BIT bit in ->personality instead of testing for equality against PER_LINUX_32BIT. Reviewed-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-05powerpc/virtex5: Fix Virtex5 machine check handlingGrant Likely
The 440x5 core in the Virtex5 uses the 440A type machine check (ie, they have MCSRR0/MCSRR1). They thus need to call the appropriate fixup function to hook the right variant of the exception. Without this, all machine checks become fatal due to loss of context when entering the exception handler. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-05MIPS: Fix incorrect use of loose in vpe.cNick Andrew
It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs
2008-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Sync FPU state in VIS emulation handler. sparc64: Fix VIS emulation bugs sparc: asm/bitops.h should define __fls sparc64: Fix bug in PTRACE_SETFPREGS64 handling.
2008-12-04Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix early panic with boot option "nosmp" x86/oprofile: fix Intel cpu family 6 detection oprofile: fix CPU unplug panic in ppro_stop() AMD IOMMU: fix possible race while accessing iommu->need_sync AMD IOMMU: set device table entry for aliased devices AMD IOMMU: struct amd_iommu remove padding on 64 bit x86: fix broken flushing in GART nofullflush path x86: fix dma_mapping_error for 32bit x86
2008-12-04Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: don't export sched_mc_power_savings in laptops
2008-12-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Return ENOSYS from sys32_syscall on 64bit kernels like elsewhere. MIPS: 64-bit: vmsplice needs to use the compat wrapper for o32 and N32. MIPS: o32: Fix number of arguments to splice(2). MIPS: Malta: Consolidate platform device code. MIPS: IP22, Fulong, Malta: Update defconfigs. MIPS: Malta: Add back RTC support MIPS: Fix potential DOS by untrusted user app.
2008-12-04powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigsAnton Vorontsov
This is needed so that Vitesse 7385 5-port switch could work on MPC8349E-mITX boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-04MIPS: Return ENOSYS from sys32_syscall on 64bit kernels like elsewhere.David Daney
When the o32 errno was changed to ENOSYS, we forgot to update the code for 64bit kernels. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04MIPS: 64-bit: vmsplice needs to use the compat wrapper for o32 and N32.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04MIPS: o32: Fix number of arguments to splice(2).Ralf Baechle
The syscall code was assuming splice only takes 4 arguments so no stack arguments were being copied from the userspace stack to the kernel stack. As the result splice was likely to fail with EINVAL. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04MIPS: Malta: Consolidate platform device code.Ralf Baechle
After adding the RTC platform device to malta-platform.c malta-mtd.c should get unified with the rest of the platform device code.
2008-12-04MIPS: IP22, Fulong, Malta: Update defconfigs.Ralf Baechle
These haven't seen much attention for too long but particularly important enable RTC_CLASS and CONFIG_RTC_HCTOSYS so the wall clock time is set on kernel startup. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04MIPS: Malta: Add back RTC supportTiejun Chen
With the conversion of MIPS to RTC_LIB the old RTC driver CONFIG_RTC became unselectable. Fix by setting up a platform device. Also enable RTC_CLASS so system time gets set from RTC on kernel initialization. [Ralf: Original patch by Tiejun; polished nice and shiny by me] Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04MIPS: Fix potential DOS by untrusted user app.Vlad Malov
On a 64 bit kernel if an o32 syscall was made with a syscall number less than 4000, we would read the function from outside of the bounds of the syscall table. This led to non-deterministic behavior including system crashes. While we were at it we reworked the 32 bit version as well to use fewer instructions. Both 32 and 64 bit versions are use the same code now. Signed-off-by: Vlad Malov <Vlad.Malov@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04sparc64: Sync FPU state in VIS emulation handler.Hong H. Pham
Copy the FPU state to the task's thread_info->fpregs for the VIS emulation functions to access. Signed-off-by: Hong H. Pham <hong.pham@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04x86: fix early panic with boot option "nosmp"Andi Kleen
Impact: fix boot crash with numcpus=0 on certain systems Fix early exception in __get_smp_config with nosmp. Bail out early when there is no MP table. Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04powerpc/4xx: Add support for ISA holes on 4xx PCI/X/EBenjamin Herrenschmidt
This adds support for ISA memory holes on the PCI, PCI-X and PCI-E busses of the 4xx platforms. The patch includes changes to the Bamboo and Canyonlands device-trees to add such a hole, others can be updated separately. The ISA memory hole is an additional outbound window configured in the bridge to generate PCI cycles in the low memory addresses, thus allowing to access things such as the hard-decoded VGA aperture at 0xa0000..0xbffff or other similar things. It's made accessible to userspace via the new legacy_mem file in sysfs for which support was added by a previous patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-04powerpc/44x: update ppc44x_defconfigStephen Rothwell
This removes CONFIG_PCI_LEGACY (which is not needed) and consequently several compiler warnings. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-04powerpc/kvm: update KVM config options in ppc44x_defconfigHollis Blanchard
KVM host support was recently enabled in ppc44x_defconfig, but since then the config option was renamed. Update ppc44x_defconfig to match. Also, KVM guests aren't very interesting without networking, so enable CONFIG_TUN and CONFIG_BRIDGE. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-04[ARM] 5339/1: fix __fls() on ARMNicolas Pitre
Commit 0c65f459ce6c intended to fix truncation issues with fls() on ARMv5+ by renaming it to __fls() and wrapping it into a C function. However that didn't take into account the fact that __fls() already already had different semantics in the kernel. Let's move the __fls() code into fls() function directly, and redefine __fls() with the appropriate semantics. While at it, bring a generic __fls() definition for pre ARMv5 too. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-03sparc64: Fix VIS emulation bugsJoseph Myers
This patch fixes some bugs in VIS emulation that cause the GCC test failure FAIL: gcc.target/sparc/pdist-3.c execution test for both 32-bit and 64-bit testing on hardware lacking these instructions. The emulation code for the pdist instruction uses RS1(insn) for both source registers rs1 and rs2, which is obviously wrong and leads to the instruction doing nothing (the observed problem), and further inspection of the code shows that RS1 uses a shift of 24 and RD a shift of 25, which clearly cannot both be right; examining SPARC documentation indicates the correct shift for RS1 is 14. This patch fixes the bug if single-stepping over the affected instruction in the debugger, but not if the testcase is run standalone. For that, Wind River has another patch I hope they will send as a followup to this patch submission. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03MN10300: Introduce barriers to replace removed volatiles in gdbstub 16550 driverDavid Howells
Introduce into the MN10300 gdbstub 16550 driver a couple of barrier() calls to replace the removed volatility of the input/output index variables for the Rx ring buffer. A previous patch added them into the on-chip serial port driver. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03sparc: asm/bitops.h should define __flsRusty Russell
bitops_64.h includes the generic one; pretty sure 32 should too. (Found by using __fls in generic code and breaking sparc defconfig build: thanks Stephen and linux-next!) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03powerpc/85xx: Create dts for each core in CAMP mode for MPC8572DSHaiying Wang
This patch creates the dts files for each core and splits the devices between the two cores for MPC8572DS. core0 has memory, L2, i2c, dma1, global-util, eth0, eth1, crypto, pci0, pci1. core1 has L2, dma2, eth2, eth3, pci2, msi. MPIC is shared between two cores but each core will protect its interrupts from other core by using "protected-sources" of mpic. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03Merge branch 'oprofile-for-tip' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into x86/urgent
2008-12-03powerpc/85xx: Don't reset the MPIC for CAMP mode on MPC8572DSHaiying Wang
The flag MPIC_WANTS_RESET shouldn't be set if we are doing cooperative asymmetric MP. The second linux shouldn't reset the pic or the first one gets very confused. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: Add localbus node in mpc8572ds dts fileHaiying Wang
Also add NOR and NAND flash partitions for mpc8572ds board Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/86xx: Basic GPIO support for GE Fanuc SBC610Martyn Welch
Basic support for the GPIO available on the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This patch adds basic support for the GPIO in the devices I/O FPGA, the GPIO functionality is exposed through the AFIX pins on the backplane, unless used by an AFIX card. This code currently does not support switching between totem-pole and open-drain outputs (when used as outputs, GPIOs default to totem-pole). The interrupt capabilites of the GPIO lines is also not currently supported. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/qe: Move cmxgcr_lock definition from the ucc.c into the qe.cAnton Vorontsov
With this patch we can compile the qe_lib/usb.c without the UCC support (that is, without UCC_GETH and/or SERIAL_QE). Fixes following link error (CONFIG_SMP should be =y to trigger this): arch/powerpc/sysdev/built-in.o: In function `qe_usb_clock_set': (.text+0x3cae): undefined reference to `cmxgcr_lock' make: *** [.tmp_vmlinux1] Error 1 While at it, also add missing spinlock.h includes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/86xx: Add use of Epson RTX-8581 RTC to GE Fanuc SBC610 dtsMartyn Welch
Adding use of newly added Epson RTX-8581 real-time clock driver to GE Fanuc SBC610's dts file and adding driver to default config. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: Fix compile warnings in mpc85xx_mds.cKumar Gala
arch/powerpc/platforms/85xx/mpc85xx_mds.c: In function 'board_fixups': arch/powerpc/platforms/85xx/mpc85xx_mds.c:244: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' arch/powerpc/platforms/85xx/mpc85xx_mds.c:250: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03x86/oprofile: fix Intel cpu family 6 detectionWilliam Cohen
Alan Jenkins wrote: > This is on an EeePC 701, /proc/cpuinfo as attached. > > Is this expected? Will the next release work? > > Thanks, Alan > > # opcontrol --setup --no-vmlinux > cpu_type 'unset' is not valid > you should upgrade oprofile or force the use of timer mode > > # opcontrol -v > opcontrol: oprofile 0.9.4 compiled on Nov 29 2008 22:44:10 > > # cat /dev/oprofile/cpu_type > i386/p6 > # uname -r > 2.6.28-rc6eeepc Hi Alan, Looking at the kernel driver code for oprofile it can return the "i386/p6" for the cpu_type. However, looking at the user-space oprofile code there isn't the matching entry in libop/op_cpu_type.c or the events/unit_mask files in events/i386 directory. The Intel AP-485 says this is a "Intel Pentium M processor model D". Seems like the oprofile kernel driver should be identifying the processor as "i386/p6_mobile" The driver identification code doesn't look quite right in nmi_init.c http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=blob;f=arch/x86/oprofile/nmi_int.c;h=022cd41ea9b4106e5884277096e80e9088a7c7a9;hb=HEAD has: 409 case 10 ... 13: 410 *cpu_type = "i386/p6"; 411 break; Referring to the Intel AP-485: case 10 and 11 should produce "i386/piii" case 13 should produce "i386/p6_mobile" I didn't see anything for case 12. Something like the attached patch. I don't have a celeron machine to verify that changes in this area of the kernel fix thing. -Will Signed-off-by: William Cohen <wcohen@redhat.com> Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-03powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dtsAnton Vorontsov
Just found the merge issue in 442746989d92afc125040e0f29b33602ad94da99 ("powerpc/83xx: Add support for MCU microcontroller in .dts files"): the commit adds the MCU controller node into the DMA node, which is wrong because the MCU sits on the I2C bus. Fix this by moving the MCU node into the I2C controller node. The original patch[1] was OK though. ;-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03oprofile: fix CPU unplug panic in ppro_stop()Eric Dumazet
If oprofile statically compiled in kernel, a cpu unplug triggers a panic in ppro_stop(), because a NULL pointer is dereferenced. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-03powerpc/85xx: Add support for SMP initializationKumar Gala
Added 85xx specifc smp_ops structure. We use ePAPR style boot release and the MPIC for IPIs at this point. Additionally added routines for secondary cpu entry and initializtion. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/85xx: minor head_fsl_booke.S cleanupKumar Gala
Removed unused branch labels Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Better setup of boot page TLB entryTrent Piepho
The initial TLB mapping for the kernel boot didn't set the memory coherent attribute, MAS2[M], in SMP mode. If this code supported booting a secondary processor, which it doesn't yet, but if it did, then when a secondary processor boots, it would probably signal the primary processor by setting a variable called something like __secondary_hold_acknowledge. However, due to the lack of the M bit, the primary processor would not snoop the transaction (even if a transaction were broadcast). If primary CPU's L1 D-cache had a copy, it would not be flushed and the CPU would never see the ack. Which would have resulted in the primary CPU spinning for a long time, perhaps a full second before it gives up, while it would have waited for the ack from the secondary CPU that it wouldn't have been able to see because of the stale cache. The value of MAS2 for the boot page TLB1 entry is a compile time constant, so there is no need to calculate it in powerpc assembly language. Also, from the MPC8572 manual section 6.12.5.3, "Bits that represent offsets within a page are ignored and should be cleared." Existing code didn't clear them, this code does. The same when the page of KERNELBASE is found; we don't need to use asm to mask the lower 12 bits off. In the code that computes the address to rfi from, don't hard code the offset to 24 bytes, but have the assembler figure that out for us. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Add SPE/EFP math emulation for E500v1/v2 processors.Liu Yu
This patch add the handlers of SPE/EFP exceptions. The code is used to emulate float point arithmetic, when MSR(SPE) is enabled and receive EFP data interrupt or EFP round interrupt. This patch has no conflict with or dependence on FP math-emu. The code has been tested by TestFloat. Now the code doesn't support SPE/EFP instructions emulation (it won't be called when receive program interrupt), but it could be easily added. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/math-emu: Remove redundant 'ret'Liu Yu
FP_DECL_EX is already used, so ret is redundant. And FP_SET_EXCEPTION will add status into return value. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/math-emu: Adopt new version of _FP_CHOOSENANLiu Yu
Move to using the same macro definition for _FP_CHOOSENAN as s390, sh, sparc32/64. The original author didn't understand this and matched what sparc64 was doing and they have updated to this definition. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc/math-emu: Fix single float point division bugLiu Yu
PowerPC float point division emulation is derived from gcc. I reported this problem on gcc maillist and got this reply: http://gcc.gnu.org/ml/gcc/2008-03/msg00543.html Since UDIV_NEEDS_NORMALIZATION is not used by kernel, we should use _FP_DIV_MEAT_1_udiv_norm to make sure the single float point is normalized before udiv_qrnnd. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-20 00:47:35 +0000