| Age | Commit message (Collapse) | Author |
|---|
|
Eliminate pcf50633_global and hence make pcf50633.c work with
multiple devices. pcf50633 is no longer a paltform device, but
an i2c device.
|
|
allow the clock directly through, which means that
we need to update the pwm-clock code to cope with
this.
Add <mach/pwm-clock.h> containing the specific code
to deal with the TCFG divider settings and provide
any other per-arch data that the pwm-clock driver
needs to function.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Merge in the accelerometer functionality from stable
From: Simon Kagstrom <simon.kagstrom@gmail.com>
This giant patch merges the functionality from stable. It also changes
the default threshold to 0 (generate interrupts on data). As the
level-triggered interrupts cause too frequent interruptions on low
thresholds, also set a lower limit to 36mg to avoid slowing down the
phone too much.
Also rearrange the probe function to disable interrupts only over device
I/O. This fixes the kernel errors when inserting the module.
Andy was right: In stable-tracking, no magic workaround is needed to
make suspend/resume work. I've tested the accelerometers under heavy
load (making the phone basically unusable) without getting lockups.
Signed-off-by: Simon Kagstrom <simon.kagstrom@gmail.com>
|
|
* Improve comment about the chip select issue with the accelerometers.
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
Make accelerometers work again in stable-tracking.
They stopped working with a previous commit.
(shifter >> 7) & 1); ...; shifter <<= 1;
Had been changed to:
(shifter >> (7 - n)) & 1) /* assuming tx_bytes == 1 */
The problem: an unneeded shifter <<= 1 was still there.
We make a small change to the indexing code to make things work again.
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Micael Henriksson <micael.h@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Some header files have moved so update #includes.
devs.h has been moved and updated. Delete the old version at
include/asm-arm/plat-s3c24xx as it is no longer used. Nothing to
migrate from this file to the new file at the new location.
s3c_device_i2c has become s3c_device_i2c0
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Hi Andy,
I found that stable tracking usb_curlim was zero because of this and the
battery was not getting charged by default.
CONFIG_USB_GADGET_VBUS_DRAW was introduced in .27-rc6 I guess.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
|
|
Change battery name from bat to battery to conform with Android better
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
i2c0 platform data wasn't initialized, which caused driver registration
to fail, and kept many other peripherals from initializing.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
|
|
After killing the Atheros SDIO stack, we shall no longer deny ourselves
the pleasure of also getting rid of the glue that keeps it on the
platform.
Not-Yet-Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Make the AR6000 WLAN driver compile after moving it outside the
Atheros SDIO stack. Note that the config option's name changes
as well.
The choice of a non-standard location (drivers/ar6000/) is
intentional. The driver is still very far from being in shape for
mainline inclusion, and the odd location should serve as an
immediate warning.
Not-Yet-Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add fake GPIO I2C bus so we can start config with pcf50633 before
real 6410 I2C bus driver is ready
Enable pcf50633 and current APM emulation to get it going (will be
deprecated shortly hopefully).
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Use the same code for bringup during initialization and when switching
the module on/off through sysfs.
This also solves the problem of not resetting the WLAN module, which
was caused by fix-set-wlan-power-mgt-to-default-on.patch only partially
reverting the power-off default introduced with
introduce-gta02-pm-wlan.patch.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
> of passing i2c information into the wm8753 driver... it handles that
> action now. Maybe that's what trashes up the PMU registration / bus
> attach stuff for PMU.
>
> Anyway that is why I removed wm8753 i2c registration from mach-gta02.c,
> it's now done in the gta02 wm8753 driver.
Ah, sorry for not noticing it. So we can remove the i2c_board_info
altogether from mach-gta02.c.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Minimal set of kernel changes to support Android operation.
Note arch/arm/configs/gta02-android-defconfig
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Try to make sure about no compiler malarky by volatile. Change hdq busy
detect. Change error handling path in hdq interface to fiq.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
This large patch removes motion sensor from Linux SPI bitbang driver.
Previously, some access was done through Linux SPI protected
by a mutex, and the ISR access was done by platform bitbang code due
to inability of Linux SPI driver to work in the interrupt context.
Now all access is done by bitbang callbacks in mach_gta02.c and are
protected by single scheme of interrupt lockout for the duration --
I line-by-line'd the driver to confirm that best I could, adding
protection and taking more care on several /sys related paths.
Because this is no longer a Linux SPI bus driver, the path for various
/sys things have changed. They can now be found down, eg,
/sys/devices/platform/lis302dl.1/sample_rate
lis302dl.1 is the top sensor and .2 the bottom. The names of the input
susbsytem paths remain the same as before.
Not working in interrupt context made trouble using interrupt lockout as
locking
[21474615.495000] BUG: sleeping function called from invalid context at kernel/sched.c:4684
[21474615.495000] in_atomic():0, irqs_disabled():128
[21474615.495000] 2 locks held by bash/779:
[21474615.495000] #0: (&buffer->mutex){....}, at: [<c00ec1b0>] sysfs_write_file+0x30/0x80
[21474615.495000] #1: (pm_mutex){....}, at: [<c007a34c>] enter_state+0xd4/0x10c
[21474615.495000] [<c0032a14>] (dump_stack+0x0/0x14) from [<c0049410>] (__might_sleep+0xdc/0xf8)
[21474615.495000] [<c0049334>] (__might_sleep+0x0/0xf8) from [<c0316c38>] (wait_for_common+0x28/0x190)
[21474615.495000] r5:c79ffd00 r4:c79ffd4c
[21474615.495000] [<c0316c10>] (wait_for_common+0x0/0x190) from [<c0316e30>] (wait_for_completion+0x18/0x1c)
[21474615.495000] r8:c79ffd84 r7:c79c4800 r6:c79ffd00 r5:c79ffd20 r4:c79ffd4c
[21474615.495000] [<c0316e18>] (wait_for_completion+0x0/0x1c) from [<c01d28ec>] (spi_sync+0xa0/0xb8)
[21474615.495000] [<c01d284c>] (spi_sync+0x0/0xb8) from [<c020ca10>] (__reg_write+0x88/0x94)
[21474615.495000] [<c020c988>] (__reg_write+0x0/0x94) from [<c020cc30>] (lis302dl_resume+0x54/0x198)
[21474615.495000] r6:60000013 r5:c79c4800 r4:c79bc9c0
[21474615.495000] [<c020cbdc>] (lis302dl_resume+0x0/0x198) from [<c01d2fb0>] (spi_resume+0x38/0x44)
[21474615.495000] r6:00000010 r5:c79c4800 r4:c79c4974
[21474615.495000] [<c01d2f78>] (spi_resume+0x0/0x44) from [<c0198f34>] (resume_device+0x8c/0x1b0)
[21474615.495000] [<c0198ea8>] (resume_device+0x0/0x1b0) from [<c01990c0>] (dpm_resume+0x68/0x134)
[21474615.495000] r7:00000003 r6:00000010 r5:c79c4800 r4:c79c4974
[21474615.495000] [<c0199058>] (dpm_resume+0x0/0x134) from [<c01991b4>] (device_resume+0x28/0x38)
[21474615.495000] r6:00000003 r5:c08b7188 r4:00000010
[21474615.495000] [<c019918c>] (device_resume+0x0/0x38) from [<c007a0f8>] (suspend_devices_and_enter+0x110/0x180)
[21474615.495000] r4:00000000
[21474615.495000] [<c0079fe8>] (suspend_devices_and_enter+0x0/0x180) from [<c007a320>] (enter_state+0xa8/0x10c)
[21474615.495000] r6:00000003 r5:c03aa414 r4:00000000
[21474615.495000] [<c007a278>] (enter_state+0x0/0x10c) from [<c007a430>] (state_store+0xac/0xc0)
[21474615.495000] r6:c7b80000 r5:00000003 r4:c03aa414
[21474615.495000] [<c007a384>] (state_store+0x0/0xc0) from [<c014dfb4>] (kobj_attr_store+0x24/0x30)
[21474615.495000] [<c014df90>] (kobj_attr_store+0x0/0x30) from [<c00ebe58>] (flush_write_buffer+0x54/0x68)
[21474615.495000] [<c00ebe04>] (flush_write_buffer+0x0/0x68) from [<c00ec1d8>] (sysfs_write_file+0x58/0x80)
[21474615.495000] r8:c7acca80 r7:c79fff78 r6:000be408 r5:00000004 r4:c7a19ea0
[21474615.495000] [<c00ec180>] (sysfs_write_file+0x0/0x80) from [<c00a91b8>] (vfs_write+0xbc/0x14c)
[21474615.495000] [<c00a90fc>] (vfs_write+0x0/0x14c) from [<c00a9774>] (sys_write+0x4c/0x7c)
[21474615.495000] r7:00000004 r6:00000000 r5:00000000 r4:c7acca80
[21474615.495000] [<c00a9728>] (sys_write+0x0/0x7c) from [<c002dc20>] (ret_fast_syscall+0x0/0x2c)
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Last rebase to stable-2.6.26 left some trash from rebasing the patches on top of this,
clean it back out
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Weeks of frantic effort to control Glamo, traced the issue to two outcomes:
nWAIT is forced down and the device is hard locked, or we survive immediate
Glamo resume and die again with nWAIT forced down when the framebuffer driver
tries to flash the soft cursor.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Light an LED in the dark crashing hell of dead resume... the problems come from
Glamo it turns out
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
All that stuff should be enforced by device tree now, out with it
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Oooh it's a lot cleaner now and explained in the comments
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Simplify it now we have Glamo as child of pcf50633
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Well dependencies of pcf50633 are getting a bit much, let's break them
out into an array
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Vibrator relies on FIQ, represent that in device tree
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Things can depend on PWM being up, allow device tree to show that
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
GPS power control device is obviously a child of pcf50633 since it
wants to meddle with regulators. Define it to be so in the device tree.
Signed-off-by: Andy Green <andy@openmoko.com>
|
