aboutsummaryrefslogtreecommitdiff
path: root/block/elevator.c
AgeCommit message (Collapse)Author
2009-09-11bio: first step in sanitizing the bio->bi_rw flag testingJens Axboe
Get rid of any functions that test for these bits and make callers use bio_rw_flagged() directly. Then it is at least directly apparent what variable and flag they check. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11scsi,block: update SCSI to handle mixed merge failuresTejun Heo
Update scsi_io_completion() such that it only fails requests till the next error boundary and retry the leftover. This enables block layer to merge requests with different failfast settings and still behave correctly on errors. Allow merge of requests of different failfast settings. As SCSI is currently the only subsystem which follows failfast status, there's no need to worry about other block drivers for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Niel Lambrechts <niel.lambrechts@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-17block: fix failfast merge testing in elv_rq_merge_ok()Tejun Heo
Commit ab0fd1debe730ec9998678a0c53caefbd121ed10 tries to prevent merge of requests with different failfast settings. In elv_rq_merge_ok(), it compares new bio's failfast flags against the merge target request's. However, the flag testing accessors for bio and blk don't return boolean but the tested bit value directly and FAILFAST on bio and blk don't match, so directly comparing them with == results in false negative unnecessary preventing merge of readahead requests. This patch convert the results to boolean by negating them before comparison. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jeff Garzik <jeff@garzik.org>
2009-07-03block: don't merge requests of different failfast settingsTejun Heo
Block layer used to merge requests and bios with different failfast settings. This caused regular IOs to fail prematurely when they were merged into failfast requests for readahead. Niel Lambrechts could trigger the problem semi-reliably on ext4 when resuming from STR. ext4 uses readahead when reading inodes and combined with the deterministic extra SATA PHY exception cycle during resume on the specific configuration, non-readahead inode read would fail causing ext4 errors. Please read the following thread for details. http://lkml.org/lkml/2009/5/23/21 This patch makes block layer reject merging if the failfast settings don't match. This is correct but likely to lower IO performance by preventing regular IOs from mingling into surrounding readahead requests. Changes to allow such mixed merges and handle errors correctly will be added later. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Niel Lambrechts <niel.lambrechts@gmail.com> Cc: Theodore Tso <tytso@mit.edu> Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-06-11Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
2009-06-09tracing/events: convert block trace points to TRACE_EVENT()Li Zefan
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02block: fix a possible oops on elv_abort_queue()Kiyoshi Ueda
I found one more mis-conversion to the 'request is always dequeued when completing' model in elv_abort_queue() during code inspection. Although I haven't hit any problem caused by this mis-conversion yet and just done compile/boot test, please apply if you have no problem. Request must be dequeued when it completes. However, elv_abort_queue() completes requests without dequeueing. This will cause oops in the __blk_end_request_all(). This patch fixes the oops. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22block: Expose stacked device queues in sysfsMartin K. Petersen
Currently stacking devices do not have a queue directory in sysfs. However, many of the I/O characteristics like sector size, maximum request size, etc. are queue properties. This patch enables the queue directory for MD/DM devices. The elevator code has been modified to deal with queues that do not have an I/O scheduler. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-20block: change the tag sync vs async restriction logicJens Axboe
Make them fully share the tag space, but disallow async requests using the last any two slots. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11block: convert to pos and nr_sectors accessorsTejun Heo
With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28block: implement and use [__]blk_end_request_all()Tejun Heo
There are many [__]blk_end_request() call sites which call it with full request length and expect full completion. Many of them ensure that the request actually completes by doing BUG_ON() the return value, which is awkward and error-prone. This patch adds [__]blk_end_request_all() which takes @rq and @error and fully completes the request. BUG_ON() is added to to ensure that this actually happens. Most conversions are simple but there are a few noteworthy ones. * cdrom/viocd: viocd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/block/dasd: dasd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/char/tape_block: tapeblock_end_request() replaced with direct calls to blk_end_request_all(). [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mike Miller <mike.miller@hp.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-28block: reorganize request fetching functionsTejun Heo
Impact: code reorganization elv_next_request() and elv_dequeue_request() are public block layer interface than actual elevator implementation. They mostly deal with how requests interact with block layer and low level drivers at the beginning of rqeuest processing whereas __elv_next_request() is the actual eleveator request fetching interface. Move the two functions to blk-core.c. This prepares for further interface cleanup. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28block: kill blk_start_queueing()Tejun Heo
blk_start_queueing() is identical to __blk_run_queue() except that it doesn't check for recursion. None of the current users depends on blk_start_queueing() running request_fn directly. Replace usages of blk_start_queueing() with [__]blk_run_queue() and kill it. [ Impact: removal of mostly duplicate interface function ] Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-15block: fix bad spelling of quiesceJens Axboe
Credit goes to Andrew Morton for spotting this one. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07block: fix inconsistency in I/O stat accounting codeJerome Marchand
This forces in_flight to be zero when turning off or on the I/O stat accounting and stops updating I/O stats in attempt_merge() when accounting is turned off. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07block: elevator quiescing helpersJens Axboe
Simple helper functions to quiesce the request queue. These are currently only used for switching IO schedulers on-the-fly, but we can use them to properly switch IO accounting on and off as well. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-06block: change the request allocation/congestion logic to be sync/async basedJens Axboe
This makes sure that we never wait on async IO for sync requests, instead of doing the split on writes vs reads. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-29block: get rid of elevator_t typedefJens Axboe
Just use struct elevator_queue everywhere instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29block: simplify empty barrier implementationTejun Heo
Empty barrier required special handling in __elv_next_request() to complete it without letting the low level driver see it. With previous changes, barrier code is now flexible enough to skip the BAR step using the same barrier sequence selection mechanism. Drop the special handling and mask off q->ordered from start_ordered(). Remove blk_empty_barrier() test which now has no user. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29block: make barrier completion more robustTejun Heo
Barrier completion had the following assumptions. * start_ordered() couldn't finish the whole sequence properly. If all actions are to be skipped, q->ordseq is set correctly but the actual completion was never triggered thus hanging the barrier request. * Drain completion in elv_complete_request() assumed that there's always at least one request in the queue when drain completes. Both assumptions are true but these assumptions need to be removed to improve empty barrier implementation. This patch makes the following changes. * Make start_ordered() use blk_ordered_complete_seq() to mark skipped steps complete and notify __elv_next_request() that it should fetch the next request if the whole barrier has completed inside start_ordered(). * Make drain completion path in elv_complete_request() check whether the queue is empty. Empty queue also indicates drain completion. * While at it, convert 0/1 return from blk_do_ordered() to false/true. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-05Merge branches 'tracing/ftrace', 'tracing/function-graph-tracer' and ↵Ingo Molnar
'tracing/urgent' into tracing/core
2008-12-03block: internal dequeue shouldn't start timerTejun Heo
blkdev_dequeue_request() and elv_dequeue_request() are equivalent and both start the timeout timer. Barrier code dequeues the original barrier request but doesn't passes the request itself to lower level driver, only broken down proxy requests; however, as the original barrier code goes through the same dequeue path and timeout timer is started on it. If barrier sequence takes long enough, this timer expires but the low level driver has no idea about this request and oops follows. Timeout timer shouldn't have been started on the original barrier request as it never goes through actual IO. This patch unexports elv_dequeue_request(), which has no external user anyway, and makes it operate on elevator proper w/o adding the timer and make blkdev_dequeue_request() call elv_dequeue_request() and add timer. Internal users which don't pass the request to driver - barrier code and end_that_request_last() - are converted to use elv_dequeue_request(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-26blktrace: port to tracepoints, updateIngo Molnar
Port to the new tracepoints API: split DEFINE_TRACE() and DECLARE_TRACE() sites. Spread them out to the usage sites, as suggested by Mathieu Desnoyers. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
2008-11-26blktrace: port to tracepointsArnaldo Carvalho de Melo
This was a forward port of work done by Mathieu Desnoyers, I changed it to encode the 'what' parameter on the tracepoint name, so that one can register interest in specific events and not on classes of events to then check the 'what' parameter. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06block: add timer on blkdev_dequeue_request() not elv_next_request()Tejun Heo
Block queue supports two usage models - one where block driver peeks at the front of queue using elv_next_request(), processes it and finishes it and the other where block driver peeks at the front of queue, dequeue the request using blkdev_dequeue_request() and finishes it. The latter is more flexible as it allows the driver to process multiple commands concurrently. These two inconsistent usage models affect the block layer implementation confusing. For some, elv_next_request() is considered the issue point while others consider blkdev_dequeue_request() the issue point. Till now the inconsistency mostly affect only accounting, so it didn't really break anything seriously; however, with block layer timeout, this inconsistency hits hard. Block layer considers elv_next_request() the issue point and adds timer but SCSI layer thinks it was just peeking and when the request can't process the command right away, it's just left there without further processing. This makes the request dangling on the timer list and, when the timer goes off, the request which the SCSI layer and below think is still on the block queue ends up in the EH queue, causing various problems - EH hang (failed count goes over busy count and EH never wakes up), WARN_ON() and oopses as low level driver trying to handle the unknown command, etc. depending on the timing. As SCSI midlayer is the only user of block layer timer at the moment, moving blk_add_timer() to elv_dequeue_request() fixes the problem; however, this two usage models definitely need to be cleaned up in the future. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17block: only call ->request_fn when the queue is not stoppedJens Axboe
Callers should use either blk_run_queue/__blk_run_queue, or blk_start_queueing() to invoke request handling instead of calling ->request_fn() directly as that does not take the queue stopped flag into account. Also add appropriate comments on the above functions to detail their usage. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17block: simplify string handling in elv_iosched_store()Li Zefan
strlcpy() guarantees the dest buffer is NULL teminated. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: change elevator to use __blk_end_request()Kiyoshi Ueda
This patch converts elevator to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' arguments is converted to 'error'. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: Add interface to abort queued requestsMike Anderson
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: unify request timeout handlingJens Axboe
Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: use linux/uaccess.h in elevator.c instead of asm variantJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09drop vmerge accountingMikulas Patocka
Remove hw_segments field from struct bio and struct request. Without virtual merge accounting they have no purpose. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09Allow elevators to sort/merge discard requestsDavid Woodhouse
But blkdev_issue_discard() still emits requests which are interpreted as soft barriers, because naïve callers might otherwise issue subsequent writes to those same sectors, which might cross on the queue (if they're reallocated quickly enough). Callers still _can_ issue non-barrier discard requests, but they have to take care of queue ordering for themselves. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03block: request_module(): use format stringmaximilian attems
Avoid bad things happening if the module has a printk control string in its name. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03block: Block layer data integrity supportMartin K. Petersen
Some block devices support verifying the integrity of requests by way of checksums or other protection information that is submitted along with the I/O. This patch implements support for generating and verifying integrity metadata, as well as correctly merging, splitting and cloning bios and requests that have this extra information attached. See Documentation/block/data-integrity.txt for more information. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-28Added in elevator switch message to blktrace streamAlan D. Brunelle
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-01block: remove remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29block: Skip I/O merges when disabledAlan D. Brunelle
The block I/O + elevator + I/O scheduler code spend a lot of time trying to merge I/Os -- rightfully so under "normal" circumstances. However, if one were to know that the incoming I/O stream was /very/ random in nature, the cycles are wasted. This patch adds a per-request_queue tunable that (when set) disables merge attempts (beyond the simple one-hit cache check), thus freeing up a non-trivial amount of CPU cycles. Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29block/elevator.c:elv_rq_merge_ok() mustn't be inlineAdrian Bunk
This patch fixes the following build error with UML and gcc 4.3: <-- snip --> ... CC block/elevator.o /home/bunk/linux/kernel-2.6/git/linux-2.6/block/elevator.c: In function ‘elv_merge’: /home/bunk/linux/kernel-2.6/git/linux-2.6/block/elevator.c:73: sorry, unimplemented: inlining failed in call to ‘elv_rq_merge_ok’: function body not available /home/bunk/linux/kernel-2.6/git/linux-2.6/block/elevator.c:103: sorry, unimplemented: called from here /home/bunk/linux/kernel-2.6/git/linux-2.6/block/elevator.c:73: sorry, unimplemented: inlining failed in call to ‘elv_rq_merge_ok’: function body not available /home/bunk/linux/kernel-2.6/git/linux-2.6/block/elevator.c:495: sorry, unimplemented: called from here make[2]: *** [block/elevator.o] Error 1 make[1]: *** [block] Error 2 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29block: make queue flags non-atomicNick Piggin
We can save some atomic ops in the IO path, if we clearly define the rules of how to modify the queue flags. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19elevator: make elevator_get() attempt to load the appropriate moduleJens Axboe
Currently we fail if someone requests a valid io scheduler, but it's modular and not currently loaded. That can happen from a driver init asking for a different scheduler, or online switching through sysfs as requested by a user. This patch makes elevator_get() request_module() to attempt to load the appropriate module, instead of requiring that done manually. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01block: make elevator lib checkpatch compliantJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28block: implement drain buffersJames Bottomley
These DMA drain buffer implementations in drivers are pretty horrible to do in terms of manipulating the scatterlist. Plus they're being done at least in drivers/ide and drivers/ata, so we now have code duplication. The one use case for this, as I understand it is AHCI controllers doing PIO mode to mmc devices but translating this to DMA at the controller level. So, what about adding a callback to the block layer that permits the adding of the drain buffer for the problem devices. The idea is that you'd do this in slave_configure after you find one of these devices. The beauty of doing it in the block layer is that it quietly adds the drain buffer to the end of the sg list, so it automatically gets mapped (and unmapped) without anything unusual having to be done to the scatterlist in driver/scsi or drivers/ata and without any alteration to the transfer length. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-24Kobject: rename kobject_init_ng() to kobject_init()Greg Kroah-Hartman
Now that the old kobject_init() function is gone, rename kobject_init_ng() to kobject_init() to clean up the namespace. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: rename kobject_add_ng() to kobject_add()Greg Kroah-Hartman
Now that the old kobject_add() function is gone, rename kobject_add_ng() to kobject_add() to clean up the namespace. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: convert block/elevator.c to use kobject_init/add_ng()Greg Kroah-Hartman
This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-18block: let elv_register() return voidAdrian Bunk
elv_register() always returns 0, and there isn't anything it does where it should return an error (the only error condition is so grave that it's handled with a BUG_ON). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-20fix typo "insted" -> "instead"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-16block: Initial support for data-less (or empty) barrier supportJens Axboe
This implements functionality to pass down or insert a barrier in a queue, without having data attached to it. The ->prepare_flush_fn() infrastructure from data barriers are reused to provide this functionality. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: add end_queued_request() and end_dequeued_request() helpersJens Axboe
We can use this helper in the elevator core for BLKPREP_KILL, and it'll also be useful for the empty barrier patch. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>