aboutsummaryrefslogtreecommitdiff
path: root/block/ll_rw_blk.c
AgeCommit message (Collapse)Author
2006-06-26spelling fixesAndreas Mohr
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-23[BLOCK] Fix bounce limit address checkAndi Kleen
Do a safer check for when to enable DMA. Currently we enable ISA DMA for cases that do not need it, resulting in OOM conditions when ZONE_DMA runs out of space. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23[PATCH] Kill PF_SYNCWRITE flagJens Axboe
A process flag to indicate whether we are doing sync io is incredibly ugly. It also causes performance problems when one does a lot of async io and then proceeds to sync it. Part of the io will go out as async, and the other part as sync. This causes a disconnect between the previously submitted io and the synced io. For io schedulers such as CFQ, this will cause us lost merges and suboptimal behaviour in scheduling. Remove PF_SYNCWRITE completely from the fsync/msync paths, and let the O_DIRECT path just directly indicate that the writes are sync by using WRITE_SYNC instead. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23[PATCH] blk_start_queue() must be called with irq disabled - add warningPaolo 'Blaisorblade' Giarrusso
The queue lock can be taken from interrupts so it must always be taken with irq disabling primitives. Some primitives already verify this. blk_start_queue() is called under this lock, so interrupts must be disabled. Also document this requirement clearly in blk_init_queue(), where the queue spinlock is set. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23[PATCH] list: use list_replace_init() instead of list_splice_init()Oleg Nesterov
list_splice_init(list, head) does unneeded job if it is known that list_empty(head) == 1. We can use list_replace_init() instead. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] blk: fix gendisk->in_flight accounting during barrier sequenceJens Axboe
While executing barrrier sequence, the bar_rq which carries actual write was accounted as normal IO on completion, while it wasn't on queueing. This caused gendisk->in_flight to be decremented by 1 after each barrier thus messed up statistics. This patch makes bar_rq not accounted as normal IO. As the containing barrier request as a whole is accounted, part of it shouldn't be. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-11[BLOCK] limit request_fn recursionJens Axboe
Don't recurse back into the driver even if the unplug threshold is met, when the driver asks for a requeue. This is both silly from a logical point of view (requeues typically happen due to driver/hardware shortage), and also dangerous since we could hit an endless request_fn -> requeue -> unplug -> request_fn loop and crash on stack overrun. Also limit blk_run_queue() to one level of recursion, similar to how blk_start_queue() works. This patch fixed a real problem with SLES10 and lpfc, and it could hit any SCSI lld that returns non-zero from it's ->queuecommand() handler. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-26[PATCH] Remove __devinitdata from notifier block definitionsChandra Seetharaman
Few of the notifier_chain_register() callers use __devinitdata in the definition of notifier_block data structure. It is incorrect as the data structure should be available after the initializations (they do not unregister them during initializations). This was leading to an oops when notifier_chain_register() call is invoked for those callback chains after initialization. This patch fixes all such usages to _not_ have the notifier_block data structure in the init data section. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20[patch] cleanup: use blk_queue_stoppedCoywolf Qi Hunt
This cleanup the source to use blk_queue_stopped. Signed-off-by: Coywolf Qi Hunt <qiyong@freeforge.net> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-04-02Documentation: fix minor kernel-doc warningsMartin Waitz
This patch updates the comments to match the actual code. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-28Merge branch 'cfq-merge' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'cfq-merge' of git://brick.kernel.dk/data/git/linux-2.6-block: [BLOCK] cfq-iosched: seek and async performance fixes [PATCH] ll_rw_blk: fix 80-col offender in put_io_context() [PATCH] cfq-iosched: small cfq_choose_req() optimization [PATCH] [BLOCK] cfq-iosched: change cfq io context linking from list to tree
2006-03-28[PATCH] for_each_possible_cpu: fixes for generic partKAMEZAWA Hiroyuki
replaces for_each_cpu with for_each_possible_cpu(). Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] ll_rw_blk: fix 80-col offender in put_io_context()Jens Axboe
This makes akpm more happy. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-28[PATCH] [BLOCK] cfq-iosched: change cfq io context linking from list to treeJens Axboe
On setups with many disks, we spend a considerable amount of time looking up the process-disk mapping on each queue of io. Testing with a NULL based block driver, this costs 40-50% reduction in throughput for 1000 disks. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-27Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Don't make debugfs depend on DEBUG_KERNEL [PATCH] Fix blktrace compile with sysfs not defined [PATCH] unused label in drivers/block/cciss. [BLOCK] increase size of disk stat counters [PATCH] blk_execute_rq_nowait-speedup [PATCH] ide-cd: quiet down GPCMD_READ_CDVD_CAPACITY failure [BLOCK] ll_rw_blk: kmalloc -> kzalloc conversion [PATCH] kzalloc() conversion in drivers/block [PATCH] update max_sectors documentation
2006-03-27[PATCH] md: Make sure QUEUE_FLAG_CLUSTER is set properly for md.NeilBrown
This flag should be set for a virtual device iff it is set for all underlying devices. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] blk_execute_rq_nowait-speedupAndrew Morton
Both elv_add_request() and generic_unplug_device() grab the queue lock and disable interrupts, do that locally and use the __ variants. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-27[BLOCK] ll_rw_blk: kmalloc -> kzalloc conversionJens Axboe
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-23[PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23Jens Axboe
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-18[PATCH] fix sysfs interaction and lifetime rules handling for queuesAl Viro
2006-03-18[PATCH] deal with rmmod/put_io_context() racesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18[PATCH] fix locking in queue_requests_store()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18[PATCH] fix double-free in blk_init_queue_node()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-08[PATCH] block: disable block layer bouncing for most memory on 64bit systemsAndi Kleen
The low level PCI DMA mapping functions should handle it in most cases. This should fix problems with depleting the DMA zone early. The old code used precious GFP_DMA memory in many cases where it was not needed. Signed-off-by: Andi Kleen <ak@suse.de> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-08[PATCH] block: implement elv_insert and use it (fix ordcolor flipping bug)Tejun Heo
q->ordcolor must only be flipped on initial queueing of a hardbarrier request. Constructing ordered sequence and requeueing used to pass through __elv_add_request() which flips q->ordcolor when it sees a barrier request. This patch separates out elv_insert() from __elv_add_request() and uses elv_insert() when constructing ordered sequence and requeueing. elv_insert() inserts the given request at the specified position and does nothing else. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] fix ordering on requeued request drainageJens Axboe
Previously, if a fs request which was being drained failed and got requeued, blk_do_ordered() didn't allow it to be reissued, which causes queue stall. This patch makes blk_do_ordered() use the sequence of each request to determine whether a request can be issued or not. This fixes the bug and simplifies code. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] percpu data: only iterate over possible CPUsEric Dumazet
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of cpudata, instead of allocating memory only for possible cpus. As a preparation for changing that, we need to convert various 0 -> NR_CPUS loops to use for_each_cpu(). (The above only applies to users of asm-generic/percpu.h. powerpc has gone it alone and is presently only allocating memory for present CPUs, so it's currently corrupting memory). Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Cc: Anton Blanchard <anton@samba.org> Acked-by: William Irwin <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] device-mapper disk statistics: timingJun'ichi "Nick" Nomura
Record I/O timing statistics The start time is added to struct dm_io, an existing structure allocated privately internally within dm and attached to each incoming bio. We export disk_round_stats() from block/ll_rw_blk.c instead of creating a private clone. Signed-off-by: Jun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[BLOCK] A few kerneldoc fixupsJens Axboe
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-24[BLOCK] ll_rw_blk: fix setting of ->ordered on initTetsuo Takata
This makes XFS barrier mounts succeed on my SCSI system. Signed-off-by: Tetsuo Takata <takatatt@intellilink.co.jp> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-24[BLOCK] ll_rw_blk: use preempt-disabling disk_stat_add() in completionJens Axboe
It can legally be called with interrupts/preemption enabled. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-24[BLOCK] ll_rw_blk: make max_sectors and max_hw_sectors unsigned intsJens Axboe
IDE lba48 can support full 64k request size, which overflows the max_hw_sectors variable. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-09Merge branch 'blk-softirq' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
Manual merge for trivial #include changes
2006-01-09[BLOCK] ll_rw_blk: Enable out-of-order request completions through softirqJens Axboe
Request completion can be a quite heavy process, since it needs to iterate through the entire request and complete the bio's it holds. This patch adds blk_complete_request() which moves this processing into a dedicated block softirq. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-09[BLOCK] Kill blk_attempt_remerge()Jens Axboe
It's a broken interface, it's done way too late. And apparently it triggers slab problems in recent kernels as well (most likely after the generic dispatch code was merged). So kill it, ide-cd is the only user of it. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-09[BLOCK][TRIVIAL] ll_rw_blk: header included twiceNicolas Kaiser
linux/blkdev.h included twice Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06[BLOCK] reimplement handling of barrier requestTejun Heo
Reimplement handling of barrier requests. * Flexible handling to deal with various capabilities of target devices. * Retry support for falling back. * Tagged queues which don't support ordered tag can do ordered. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06[BLOCK] ll_rw_blk: separate out bio init part from __make_requestTejun Heo
Separate out bio initialization part from __make_request. It will be used by the following blk_ordered_reimpl. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06[BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn()Tejun Heo
add @uptodate argument to end_that_request_last() and @error to rq_end_io_fn(). there's no generic way to pass error code to request completion function, making generic error handling of non-fs request difficult (rq->errors is driver-specific and each driver uses it differently). this patch adds @uptodate to end_that_request_last() and @error to rq_end_io_fn(). for fs requests, this doesn't really matter, so just using the same uptodate argument used in the last call to end_that_request_first() should suffice. imho, this can also help the generic command-carrying request jens is working on. Signed-off-by: tejun heo <htejun@gmail.com> Signed-Off-By: Jens Axboe <axboe@suse.de>
2006-01-06[BLOCK] mark some block/ variables consArjan van de Ven
the patch below marks various read-only variables in block/* as const, so that gcc can optimize the use of them; eg gcc will replace the use by the value directly now and will even remove the memory usage of these. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06[BLOCK] ll_rw_blk: fastpath get_request()Jens Axboe
Originally from: Nick Piggin <nickpiggin@yahoo.com.au> Move current_io_context out of the get_request fastpth. Also try to streamline a few other things in this area. Signed-off-by: Jens Axboe <axboe@suse.de>
2005-12-15[SCSI] seperate max_sectors from max_hw_sectorsMike Christie
- export __blk_put_request and blk_execute_rq_nowait needed for async REQ_BLOCK_PC requests - seperate max_hw_sectors and max_sectors for block/scsi_ioctl.c and SG_IO bio.c helpers per Jens's last comments. Since block/scsi_ioctl.c SG_IO was already testing against max_sectors and SCSI-ml was setting max_sectors and max_hw_sectors to the same value this does not change any scsi SG_IO behavior. It only prepares ll_rw_blk.c, scsi_ioctl.c and bio.c for when SCSI-ml begins to set a valid max_hw_sectors for all LLDs. Today if a LLD does not set it SCSI-ml sets it to a safe default and some LLDs set it to a artificial low value to overcome memory and feedback issues. Note: Since we now cap max_sectors to BLK_DEF_MAX_SECTORS, which is 1024, drivers that used to call blk_queue_max_sectors with a large value of max_sectors will now see the fs requests capped to BLK_DEF_MAX_SECTORS. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14[SCSI] export blk layer functions needed for blk_execute_rq_nowaitMike Christie
To send async requests we need these two functions exported. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-18[BLOCK] new block/ directory comment tidyCoywolf Qi Hunt
Some leftover comments referring to drivers/block that are now block/. They don't add any information we don't already have, so kill them. Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-07Merge branch 'block-dir' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
2005-11-04[BLOCK] Move all core block layer code to new block/ directoryJens Axboe
drivers/block/ is right now a mix of core and driver parts. Lets move the core parts to a new top level directory. Al will move the fs/ related block parts to block/ next. Signed-off-by: Jens Axboe <axboe@suse.de>