aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2005-09-03[ACPI] add static to function definitionsAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-03[ACPI] ACPICA 20050902Robert Moore
Fixed a problem with the internal Owner ID allocation and deallocation mechanisms for control method execution and recursive method invocation. This should eliminate the OWNER_ID_LIMIT exceptions and "Invalid OwnerId" messages seen on some systems. Recursive method invocation depth is currently limited to 255. (Alexey Starikovskiy) http://bugzilla.kernel.org/show_bug.cgi?id=4892 Completely eliminated all vestiges of support for the "module-level executable code" until this support is fully implemented and debugged. This should eliminate the NO_RETURN_VALUE exceptions seen during table load on some systems that invoke this support. http://bugzilla.kernel.org/show_bug.cgi?id=5162 Fixed a problem within the resource manager code where the transaction flags for a 64-bit address descriptor were handled incorrectly in the type-specific flag byte. Consolidated duplicate code within the address descriptor resource manager code, reducing overall subsystem code size. Signed-off-by: Robert Moore <Robert.Moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-03[ACPI] revert owner-id-3.patchLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-31[ACPI] Error: Invalid owner_id: 00Alexey Y. Starikovskiy
Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-29[ACPI] ACPICA 20050815Bob Moore
Implemented a full bytewise compare to determine if a table load request is attempting to load a duplicate table. The compare is performed if the table signatures and table lengths match. This will allow different tables with the same OEM Table ID and revision to be loaded. Although the BIOS is technically violating the ACPI spec when this happens -- it does happen -- so Linux must handle it. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-29Auto-update from upstreamLen Brown
2005-08-27[PATCH] acpi_shutdown: Only prepare for power off on power_offEric W. Biederman
When acpi_sleep_prepare was moved into a shutdown method we started calling it for all shutdowns. It appears this triggers some systems to power off on reboot. Avoid this by only calling acpi_sleep_prepare if we are going to power off the system. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-25merge ibm into testLen Brown
2005-08-25[ACPI] IBM ThinkPad ACPI Extras Driver v0.12Borislav Deianov
http://ibm-acpi.sf.net/ Signed-off-by: Borislav Deianov <borislav@users.sf.net> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25[ACPI] delete CONFIG_ACPI_PCILen Brown
Delete the ability to build an ACPI kernel that does not include PCI support. When such a machine is created and it requires a tuned kernel, send a patch. http://bugzilla.kernel.org/show_bug.cgi?id=1364 Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25[ACPI] remove "default m" from acpi/KconfigLen Brown
Andi Kleen suggested it was unconventional for us to "default m" on ACPI modules -- even though they are expected to be deployed as modules. But as "default n" would likely result in some users building nonsense kernels, we compromise to "default y". Distros are expected to continue to use =m in their configs. Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25[ACPI] reduce use of EXPERIMENTAL in acpi/KconfigLen Brown
Distros are shipping modules we had marked EXPERIMENTAL, so clearly it has lost some meaning. Delete that dependency for shipping modules, retaining it only for ACPI_HOTKEY and ACPI_CONTAINER to emphasize that they lack testing on real hardware. Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25[ACPI] IA64-related ACPI Kconfig fixesLen Brown
Build issues were mostly in the ACPI=n case -- don't do that. Select ACPI from IA64_GENERIC. Add some missing dependencies on ACPI. Mark BLACKLIST_YEAR and some laptop-only ACPI drivers as X86-only. Let me know when you get an IA64 Laptop. Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[ACPI] delete CONFIG_ACPI_BUSLen Brown
it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[ACPI] delete CONFIG_ACPI_INTERPRETERLen Brown
it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[ACPI] delete CONFIG_ACPI_BOOTLen Brown
it has been a synonym for CONFIG_ACPI since 2.6.12 Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-15Merge from-linus to-akpmLen Brown
2005-08-15Merge 'acpi-2.6.12' branch into to-akpmLen Brown
2005-08-15Merge to-linus-stable into to-akpmLen Brown
2005-08-15Merge ../to-linus-stable/Len Brown
2005-08-15[ACPI] re-enable platform-specific hotkey drivers by defaultLuming Yu
When both platform-specific and generic drivers exist, enable generic over-ride with "acpi_generic_hotkey". http://bugzilla.kernel.org/show_bug.cgi?id=4953 Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-14Revert PCIBIOS_MIN_IO changes for 2.6.13Linus Torvalds
This reverts commits 71db63acff69618b3d9d3114bd061938150e146b [PATCH] increase PCIBIOS_MIN_IO on x86 and 0b2bfb4e7ff61f286676867c3508569bea6fbf7a ACPI: increase PCIBIOS_MIN_IO on x86 since Lukas Sandströ<lukass@etek.chalmers.se> reports that this breaks his on-board nvidia audio. We should re-visit this later. For now we revert the change Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-12[ACPI] don't complain about PCI root bridges without _SEGBjorn Helgaas
There are lots of single-PCI-segment machines that don't supply _SEG for the root bridges. The PCI root bridge driver silently assumes the segment to be zero in this case, so glue.c shouldn't complain either. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-11Merge acpi-2.6.12 to-akpmLen Brown
2005-08-11[ACPI] Lindent drivers/acpi/ec.cLen Brown
necessary for clean merge from acpi-2.6.12 to-akpm Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-11[ACPI] Fix "ec_burst=1" mode latency issueLuming Yu
http://bugzilla.kernel.org/show_bug.cgi?id=3851 Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05[ACPI] Lindent all ACPI filesLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05[ACPI] whitespacePavel Machek
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05[ACPI] Merge acpi-2.6.12 branch into 2.6.13-rc3Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04[ACPI] ACPI_HOTPLUG_CPU Kconfig dependency updateAdrian Bunk
prevent: HOTPLUG_CPU=y ACPI_PROCESSOR=y ACPI_HOTPLUG_CPU=n Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04[ACPI] lint: irqrouter_suspend() takes a pm_message_t, not a u32Andrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04[ACPI] acpi_remove_notify_handler() on video driver unloadKarol Kozimor
The video driver doesn't properly remove all the notify handlers on module unload. This has a side effect of subdevices failing to register on module reload, but sudden death looms if the handlers trigger after the module is unloaded. Signed-off-by: Karol Kozimor <sziwan@hell.org.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04[ACPI] acpi_pci_enable_irq() now checks for acpi_register_gsi() errorsKenji Kaneshige
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04/home/lenb/src/to-akpm branch 'acpi-2.6.12'Len Brown
2005-08-04Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/to-linusLinus Torvalds
2005-08-04When a merge does not work automatically, git preventsLen Brown
commit from running until a change has been made in the destination. In this instance the desired result was to choose the destination version of the file and ignore the source version, but git would not allow that. Here I added a blank line to let git commit think I resolved a merge conflict.
2005-08-03Merge ../to-linus-stableLen Brown
2005-08-03/home/lenb/src/to-linus-stable branch 'acpi-2.6.12'Len Brown
2005-08-03[ACPI] S3 resume: avoid kmalloc() might_sleep oops symptomDavid Shaohua Li
ACPI now uses kmalloc(...,GPF_ATOMIC) during suspend/resume. http://bugzilla.kernel.org/show_bug.cgi?id=3469 Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-03[ACPI] delete Warning: Encountered executable code at module level, ↵Len Brown
[AE_NOT_CONFIGURED] http://bugzilla.kernel.org/show_bug.cgi?id=4923 Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-03Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/to-linusLinus Torvalds
2005-08-03/home/lenb/src/to-linus branch 'acpi-2.6.12'Len Brown
2005-08-03Merge ../to-linusLen Brown
2005-08-03[ACPI] CONFIG_ACPI_HOTKEY is now "n" by defaultLuming Yu
For 2.6.12 behaviour, this (EXPERIMENTAL) driver should not be built. Update the driver source with latest from Luming. Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-03[ACPI] restore /proc/acpi/button/ (ala 2.6.12)Alexey Starikovskiy
Signed-off-by Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by Len Brown <len.brown@intel.com>
2005-08-03[ACPI] revert Embedded Controller to polling-mode by default (ala 2.6.12)Luming Yu
Burst mode isn't ready for prime time, but can be enabled for test via "ec_burst=1" Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-03[ACPI] PCI interrupt link suspend/resume - revert to 2.6.12 behaviourDavid Shaohua Li
This patch disables the PCI Interrupt Link refernece counts, which should not co-exist with the 2.6.12 irq_router.resume method or else a double acpi_pci_link_set() could result on resume. Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-03[ACPI] fix 64-bit build warning in processor_idle.cLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-02[PATCH] ACPI: increase PCIBIOS_MIN_IO on x86Ivan Kokshaysky
We have increased PCIBIOS_MIN_IO to 0x4000, but still want motherboard resources to be allocated properly. So we need to state 0x1000 (according to the comment) limit explicitely. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01Revert ACPI interrupt resume changesLinus Torvalds
If there are devices that use interrupts over a suspend event, ACPI must restore the PCI interrupt links on resume. Anything else breaks any device that hasn't been converted to the new (dubious) PM rules. Drivers that need the irq free/re-aquire sequence can be done one by one independently of this one.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 15:53:14 +0000