aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2007-07-19PM: Introduce pm_power_off_prepareRafael J. Wysocki
Introduce the pm_power_off_prepare() callback that can be registered by the interested platforms in analogy with pm_idle() and pm_power_off(), used for preparing the system to power off (needed by ACPI). This allows us to drop acpi_sysclass and device_acpi that are only defined in order to register the ACPI power off preparation callback, which is needed by pm_power_off() registered in a much different way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19ACPI: Do not prepare for hibernation in acpi_shutdownRafael J. Wysocki
Since we are now explicitly calling hibernation_ops->prepare() before hibernation_ops->enter() in hibernation_platform_enter() (defined in kernel/power/disk.c), ACPI should not call acpi_sleep_prepare(ACPI_STATE_S4) from acpi_shutdown(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19swsusp: introduce restore platform operationsRafael J. Wysocki
At least on some machines it is necessary to prepare the ACPI firmware for the restoration of the system memory state from the hibernation image if the "platform" mode of hibernation has been used. Namely, in that cases we need to disable the GPEs before replacing the "boot" kernel with the "frozen" kernel (cf. http://bugzilla.kernel.org/show_bug.cgi?id=7887). After the restore they will be re-enabled by hibernation_ops->finish(), but if the restore fails, they have to be re-enabled by the restore code explicitly. For this purpose we can introduce two additional hibernation operations, called pre_restore() and restore_cleanup() and call them from the restore code path. Still, they should be called if the "platform" mode of hibernation has been used, so we need to pass the information about the hibernation mode from the "frozen" kernel to the "boot" kernel in the image header. Apparently, we can't drop the disabling of GPEs before the restore because of Bug #7887 .  We also can't do it unconditionally, because the GPEs wouldn't have been enabled after a successful restore if the suspend had been done in the 'shutdown' or 'reboot' mode. In principle we could (and probably should) unconditionally disable the GPEs before each snapshot creation *and* before the restore, but then we'd have to unconditionally enable them after the snapshot creation as well as after the restore (or restore failure)   Still, for this purpose we'd need to modify acpi_enter_sleep_state_prep() and acpi_leave_sleep_state() and we'd have to introduce some mechanism synchronizing the disablind/enabling of the GPEs with the device drivers' .suspend()/.resume() routines and with disable_/enable_nonboot_cpus().  However, this would have affected the suspend (ie. s2ram) code as well as the hibernation, which I'd like to avoid in this patch series. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18Add common orderly_poweroff()Jeremy Fitzhardinge
Various pieces of code around the kernel want to be able to trigger an orderly poweroff. This pulls them together into a single implementation. By default the poweroff command is /sbin/poweroff, but it can be set via sysctl: kernel/poweroff_cmd. This is split at whitespace, so it can include command-line arguments. This patch replaces four other instances of invoking either "poweroff" or "shutdown -h now": two sbus drivers, and acpi thermal management. sparc64 has its own "powerd"; still need to determine whether it should be replaced by orderly_poweroff(). Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andi Kleen <ak@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David S. Miller <davem@davemloft.net>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-02ACPI: fix acpi_osi=!LinuxLen Brown
Need to check for special case "acpi_osi=!Linux" before handling the general case "acpi_osi=!*", or it will have no effect. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01asus_acpi: fix oops on non-asus machinesMaxime Austruy
If asus_acpi_init doesn't find any device it knows about, it mistakenly returns a "success" error code even though it cleans up after itself. Later when trying to rmmod asus_acpi, the module_exit routine would try to clean up one more time and we would end up calling acpi_bus_unregister_driver(&asus_hotk_driver) twice. This patch addresses this first problem by returning -ENODEV when no appropriate device is found. Then there was also another bug with the code handling the return value of backlight_device_register. If this function ever failed, the driver would cleanup by calling the module_exit routine from module_init, but it would still return "success". So any attempt to rmmod this module would result in asus_acpi_exit being called twice but it's not ready to handle it (I haven't hit this bug, just found it by code inspection). This patch fixes that by inserting a return -ENODEV; at the end of this error handling path. Signed-off-by: Maxime Austruy <maxime@tralhalla.org> Cc: Len Brown <lenb@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-23ACPI: fix 2.6.20 SMP boot regressionVenkatesh Pallipadi
Always disable/enable interrupts in the acpi idle routine, even in the error path. This is required as the 2.6.20 change in git commit d331e739f5ad2aaa9... "Fix interrupt race in idle callback" expects the idle handler to enable interrupt before returning. There was a case in acpi idle routine, in which interrupt was not being enabled before return, which caused the system to hang at bootup, while enabling C-states on an SMP system. The signature of the hang was that "processor.nocst" was required to enable boot. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-06-18ACPICA: fix error path in new external package objects as method argumentsMyron Stowe
In the routine acpi_ut_create_package_object(), if the ACPI_ALLOCATE_ZEROED() fails then ACPI_FREE(package_desc) is called as part of the cleanup. This should instead be acpi_ut_remove_reference(package_desc) in order to remove the reference acquired from acpi_ut_create_internal_object() [see the routine acpi_ut_create_buffer_object() as an example of proper functionality]. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-06-18ACPI: gracefully print null trip-point deviceThomas Renninger
if acpi_bus_get_device() returns NULL, print nothing instead of "<NUL" in /proc/acpi/thermal_zone/*/trip_points Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-06-16toshiba_acpi: fix section mismatch in allyesconfigRandy Dunlap
Fix section error (allyesconfig). The exit function is called from init, so functions that are called by the exit function cannot be marked __exit. WARNING: drivers/built-in.o(.text+0xe5bc6): Section mismatch: reference to .exit. text: (between 'toshiba_acpi_exit' and 'hci_raw') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-02Pull osi-now into release branchLen Brown
2007-06-02Pull now into release branchLen Brown
2007-06-02ACPICA: Support for external package objects as method argumentsBob Moore
Implemented support to allow Package objects to be passed as method arguments to the acpi_evaluate_object interface. Previously, this would return an AE_NOT_IMPLEMENTED exception. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-06-02ACPI: Section mismatch ... acpi_map_pxm_to_nodeLuck, Tony
Last of the "Section mismatch" errors from ia64 builds! acpi_map_pxm_to_node() is defined with attribute __cpuinit, but is called by "normal" kernel functions acpi_getnode() and acpi_map_cpu2node(). Commit f363d16fbb9374c0bd7f2757d412c287169094c9 moved the data structures on which this routine operates from __cpuinitdata to regular memory, so this routine can also move out of init space. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-06-01acpi: fix section mismatch warning in asus + toshibaSam Ravnborg
Fix following section mismatch warnings in acpi WARNING: drivers/acpi/asus_acpi.o(.init.text+0xb7): Section mismatch: reference to .exit.text: (after 'init_module') WARNING: o-i386/drivers/acpi/toshiba_acpi.o(.init.text+0x13a): Section mismatch: reference to .exit.text: (after 'init_module') The exit function is used in the init function during an error codition. As __exit may be discarded during link-time / run-time this is no good. Do not mark the exit function __exit. Note: This warning is only seen by my local copy of modpost but the change will soon hit upstream. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30ACPI: add __init to acpi_initialize_subsystem()Len Brown
Add __init to: acpi_initialize_subsystem() (and un-export it) acpi_os_initialize() Add __initdata to: acpi_osl_dmi_table[] Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-30ACPI: Make _OSI(Linux) a special caseLen Brown
_OSI("Linux") is like _OS("Linux"), it is ill-defined and virtually no BIOS vendors test interaction with it. As a result, it can do more damage than good because it causes the BIOS to follow un-tested paths. Recently, several machines have turned up that erroneously test this string in a way which causes them to _not_ test other compatibility strings, including the ZI9 and Toshiba. So it appears that this bad code has made it into a BIOS vendor's reference BIOS. Linux has no choice but to stop advertising compatibility with _OSI string "Linux" - as there are an unbounded number of possible incompatibilities going forward. But some BIOSes have already shipped which do use it for things like conditionally re-enabling video on resume from S3. (Too bad they didn't do that unconditionally) Add special case code for _OSI(Linux) Squawk to dmesg if _OSI(Linux) is requested Add DMI list both to enable and disable _OSI(Linux) But for now, keep the default enabled via #define OSI_LINUX_ENABLED. http://bugzilla.kernel.org/show_bug.cgi?id=7787 Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-29ACPI: extend "acpi_osi=" boot optionLen Brown
The boot option "acpi_osi=" has always disabled Linux _OSI support, thus disabling all OS Interface strings which are advertised by Linux to the BIOS. Now... acpi_osi="string" adds the interface string, and acpi_osi="!string" invalidates the pre-defined interface string eg. acpi_osi="!Windows 2006" would disable Linux's claim of Vista compatibility. Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-29ACPI: thermal: Replace pointer with name in trip_pointsThomas Renninger
For users with active thermal trip points, they need the fan's name, rather than its address, to understand where to look to observe and control fan state. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-29ACPICA: allow Load(OEMx) tablesLen Brown
HP and Hitachi machines have been implemented with SSDT's that use the "OEMx" signatures. But upon Load, ACPICA is rejecting these tables because they are not using the "SSDT" signature. ACPI Error (tbinstal-0134): Table has invalid signature [OEMx], must be SSDT... Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-17acpi: fix potential call to a freed memory section.Aaron Durbin
Strip __cpuinit[data] from Node <-> PXM routines and supporting data structures. Also make pxm_to_node_map and node_to_pxm_map local to the numa acpi module. This fixes a bug triggered by the following conditions: - boot on a machine with a SLIT table defined - kernel is configured w/ CONFIG_HOTPLUG_CPU=n - cat /sys/devices/system/node/node*/distance This will cause an oops by calling into a freed memory section. In particular, on x86_64, __node_distance calls node_to_pxm(). Signed-off-by: Aaron Durbin <adurbin@google.com> Cc: Len Brown <lenb@kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10Pull misc-for-upstream into release branchLen Brown
2007-05-10acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC ↵Lennart Poettering
commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-10Pull acpica into release branchLen Brown
2007-05-10Pull bugzilla-8385 into release branchLen Brown
2007-05-10Pull thermal into release branchLen Brown
2007-05-09ACPICA: LindentLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09ACPI: created a dedicated workqueue for notify() executionAlexey Starikovskiy
HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09Revert "ACPICA: fix AML mutex re-entrancy"Len Brown
This reverts commit c0d127b56937c3e72c2b1819161d2f6718eee877. These changes to AML locking were made to allow Notify handlers to be called on the stack and not deadlock. However, that scheme turns out to be flawed and was reverted by the previous commit, so this commit restores the locking to it previous design. Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09Revert "Execute AML Notify() requests on stack."Len Brown
This reverts commit 5f7748cf91558a5026ded5be93c5bf6c1ac34edf. While that change fixed the HP http://bugzilla.kernel.org/show_bug.cgi?id=5534 it broke the ACER: http://bugzilla.kernel.org/show_bug.cgi?id=8385 which as AML that caused Linux go recursive and stack fault. So this commit by itself will restore the ACER and again break the HP, which we'll fix another way. Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09Revert "ACPICA: revert "acpi_serialize" changes"Len Brown
This reverts commit a8f4af6dc6600980885c594f52eecd60edd62013. Thus restoring ACPICA's new acpi_serialize code. This commit by itself may cause a regression, but it is reverted in this order so that subsequent reverts reverts under this one can be made without conflict. Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09PM: Separate hibernation code from suspend codeRafael J. Wysocki
[ With Johannes Berg <johannes@sipsolutions.net> ] Separate the hibernation (aka suspend to disk code) from the other suspend code. In particular: * Remove the definitions related to hibernation from include/linux/pm.h * Introduce struct hibernation_ops and a new hibernate() function to hibernate the system, defined in include/linux/suspend.h * Separate suspend code in kernel/power/main.c from hibernation-related code in kernel/power/disk.c and kernel/power/user.c (with the help of hibernation_ops) * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fix unnecesary meminitYasunori Goto
This is to fix unnecessary __meminit definition. These are exported for kernel modules. I compiled on ia64/x86-64 with memory hotplug on/off. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08workaround rtc-related acpi table bugsDavid Brownell
This works around a bug seen in some RTC-related ACPI table entries, and tweaks related diagnostics to follow the ACPI convention. The bug prevents misleading boot-time messages: platforms affected by this bug wrongly report they can support alarms up to one year in the future, when in fact the longest alarm is just 24 hours. That will surprise anyone trying to use those extended alarms. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08ACPI wakeup hooks for rtc-cmosDavid Brownell
Remove /proc/acpi/alarm file when the rtc-cmos "wakealarm" file is available. Instead, provide hooks that rtc-cmos will use. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08PNPACPI sets pnpdev->dev.archdataDavid Brownell
Teach PNPACPI how to hook up its devices to their ACPI nodes, so that pnpdev->dev.archdata points to the parallel acpi device node. Previously this only worked for PCI, leaving a notable hole. Export "acpi_bus_type" so this can work. Remove some extraneous whitespace. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fix section mismatch of memory hotplug related code.Yasunori Goto
This is to fix many section mismatches of code related to memory hotplug. I checked compile with memory hotplug on/off on ia64 and x86-64 box. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07remove software_suspend()Johannes Berg
Remove software_suspend() and all its users since pm_suspend(PM_SUSPEND_DISK) should be equivalent and there's no point in having two interfaces for the same thing. The patch also changes the valid_state function to return 0 (false) for PM_SUSPEND_DISK when SOFTWARE_SUSPEND is not configured instead of accepting it and having the whole thing fail later. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-05Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits) [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall [PATCH] i386: type may be unused [PATCH] i386: Some additional chipset register values validation. [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split. [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu [PATCH] i386: white space fixes in i387.h [PATCH] i386: Drop noisy e820 debugging printks [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems [PATCH] x86-64: Share identical video.S between i386 and x86-64 [PATCH] x86-64: Remove CONFIG_REORDER [PATCH] x86-64: Print type and size correctly for unknown compat ioctls [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0) [PATCH] i386: Little cleanups in smpboot.c [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible [PATCH] i386: Add X86_FEATURE_RDTSCP [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386 [PATCH] i386: Implement alternative_io for i386 ... Fix up trivial conflict in include/linux/highmem.h manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Report the number of processors in PowerNow-k8 correctly [CPUFREQ] do not declare undefined functions [CPUFREQ] cleanup kconfig options [CPUFREQ] Longhaul - Revert Longhaul ver. 2 [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support [CPUFREQ] Fix limited cpufreq when booted on battery Fix preemption warnings in speedstep-centrino.c [CPUFREQ] Longhaul - Correct PCI code [CPUFREQ] p4-clockmod: switch to rdmsr_on_cpu/wrmsr_on_cpu
2007-05-02[PATCH] x86: Log reason why TSC was marked unstablejohn stultz
Change mark_tsc_unstable() so it takes a string argument, which holds the reason the TSC was marked unstable. This is then displayed the first time mark_tsc_unstable is called. This should help us better debug why the TSC was marked unstable on certain systems and allow us to make sure we're not being overly paranoid when throwing out this troublesome clocksource. Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andi Kleen <ak@suse.de>
2007-04-30ACPI: delete un-reliable concept of cooling modeLen Brown
The scheme where the thermal driver displayed the cooling mode /proc/acpi/thermal_zone/*/cooling_mode was flawed in two ways. First, the success of _SCP doesn't actually mean that the BIOS moved any trip points. On many BIOS, _SCP is present, but does nothing. So displaying what _SCP executed actually was wrong more times than it was right. Second, examining the relative position of the trip points when the thermal_zone is added is insufficient -- as the BIOS reserves the right to change the trip points at run-time. The only reliable way for the user to determine if the thermal zone is in active, passive, or critical mode is to examine the relative position of the trip points. The user can do this without the kernel doing it for them by looking in /proc/acpi/thermal_zone/*/trip_points New contents for /proc/acpi/thermal_zone/*/cooling_mode: If _SCP available: "0 - Active; 1 - Passive\n" If _SCP unavailable: "<setting not supported>\n" Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-30ACPI: thermal trip points are read-onlyLen Brown
/proc/acpi/thermal_zone/*/trip_points displays what the kernel reads from the BIOS via ACPI. If you echo a string of ':' deliminted numbers to this file then it will change what it displays. But it shouldn't, since the kernel has no way to communicate these changes to ACPI thermal zones. ACPI thermal zone trip points are read-only. The kernel does have the opportunity to ask the BIOS to change the trip points with _SCP - Set Cooling Policy. Request Active Cooling Mode: # echo 0 > /proc/acpi/thermal_zone/*/cooling_policy Request Passive Cooling Mode: # echo 1 > /proc/acpi/thermal_zone/*/cooling_policy However, in practice it is quite rare for the BIOS to support the optional _SCP, and it is even more rare for the BIOS to export an _SCP that actually changes the trip points. Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-30power management: implement pm_ops.valid for everybodyJohannes Berg
Almost all users of pm_ops only support mem sleep, don't check in .valid and don't reject any others in .prepare so users can be confused if they check /sys/power/state, especially when new states are added (these would then result in s-t-r although they're supposed to be something different). This patch implements a generic pm_valid_only_mem function that is then exported for users and puts it to use in almost all existing pm_ops. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: linux-pm@lists.linux-foundation.org Cc: Len Brown <lenb@kernel.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-28Pull bugzilla-8346 into release branchLen Brown
2007-04-28Pull sbs into release branchLen Brown
2007-04-28Pull dock into release branchLen Brown
2007-04-28Pull ec into release branchLen Brown