aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2008-07-20APCI: revert another duplicated patchThomas Gleixner
commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk tables if ACPI was disabled") is another superfluous duplicate commit caused by git -> quilt -> git conversion. Revert it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20APCI: revert duplicated patchThomas Gleixner
commit 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") was merged between 2.6.26-rc8 and -rc9) Due to rebasing the ACPI tree via quilt the same patch got applied again via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") Revert it, as it is obviously bogus. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-18cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptrMike Travis
* This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'linus' into cpus4096Ingo Molnar
Conflicts: drivers/acpi/processor_throttling.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Revert "ACPI: don't walk tables if ACPI was disabled"Andi Kleen
This reverts commit d1857056904d5f313f11184fcfa624652ff9620a. Double commit, noticed by Thomas Gleixner. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18Merge branch 'merge' into release-2.6.27Andi Kleen
2008-07-18Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled."Andi Kleen
Revert double commit by mistake. Noticed by Thomas Gleixner. This reverts commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18Revert "Fix FADT parsing"Andi Kleen
This reverts commit 01a5bba576b9364b33f61f0cd9fa70c2cf5535e2. There seem to be some FADTs around with bogus information in the v2 fields. Revert this patch for now until this can be properly resolved. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18ACPI : Set FAN device to correct state in boot phaseZhao Yakui
Subject:ACPI: Set FAN device to correct state in boot phase From: Zhao Yakui <yakui.zhao@intel.com> On some laptops when ACPI FAN driver is loaded, maybe the FAN device will be turned on. But if the temperature is below the threshold, the corresponding FAN device should be turned off in the course of loading thermal driver. So it is necessary to set the FAN device to the correct state in course of loading the thermal driver. http://bugzilla.kernel.org/show_bug.cgi?id=8049 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18ACPI: Ignore _BQC object when registering backlight deviceZhao Yakui
According to acpi spec , the objectes of _BCL and _BCM are required if integrated LCD is present and supports brightness level and the _BQC is the optional object. So the _BQC object will be ignored when the backlight device is registered. At the same time when there is no _BQC object, the current brightness will be set to the maximum. http://bugzilla.kernel.org/show_bug.cgi?id=10206 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-18ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptorsBjorn Helgaas
Silently ignore _PRS End Tags. We already ignore Start Dependent Functions in _PRS, and we already ignore End Tags in _CRS, so we might as well ignore End Tags in _PRS as well. Silently ignore _PRS IRQ descriptors that mention no interrupts. The spec allows this (section 6.4.2.1 in ACPI 3.0b spec), and it probably means the interrupt link can't be configured at all. This patch doesn't change any functional behavior; it just removes confusing complaints like these: ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry when parsing _PRS data "23 00 00 18 79 00" from an IBM xSeries 335 dual Pentium IV Xeon 2.40 GHz machine. For more details, see http://bugzilla.kernel.org/show_bug.cgi?id=11049 The "23 00 00 18" part is a three-byte-long small IRQ resource with no bits set in the IRQ mask ("00 00"), and level-triggered, active low, shareable ("18"). The "79 00" is an End Tag (type 0x7). It is superfluous since there is no Start Dependent Function tag and there are no resources after it, but it is harmless. Thanks to Gabriele Trombetti <g.trombetti.lkrnl1213@logicschema.com> (aka Kurk) for reporting this and testing the patch. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
2008-07-16Fix FADT parsingJan Beulich
The (1.0 inherited) separate length fields in the FADT are byte granular. Further, PM1a/b may have distinct lengths and live in distinct address spaces. acpi_tb_convert_fadt() should account for all of these conditions. Apart from these changes I'm puzzled by the fact that, not just for acpi_gbl_xpm1{a,b}_enable, acpi_hw_low_level_{read,write}() get an explicit size passed rather than using the size found in the passed GAS. What happens on a platform that defines PM1{a,b} wider than 16 bits? Of course, acpi_hw_low_level_{read,write}() at present are entirely un-prepared to deal with sizes other than 8, 16, or 32, not to speak of a non-zero bit_offset or access_width... Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.Aaron Durbin
Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16ACPI: use dev_printk when possibleBjorn Helgaas
Convert printks to use dev_printk(). The most obvious change will be messages like this: -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31 +cciss 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: video: fix brightness allocationJulia Jomantaite
Fix use of uninitialized device->brightness. Signed-off-by: Julia Jomantaite <julia.jomantaite@gmail.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ACPI: Disable MWAIT via DMI on broken Compal boardZhao Yakui
If a system matches in this DMI table, Linux will disable MWAIT support for idle. ie. "idle=nomwait" is automatically invoked and C1_FFH and C2C3_FFH access mode are disabled. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI : Create "idle=nomwait" bootparamZhao Yakui
"idle=nomwait" disables the use of the MWAIT instruction from both C1 (C1_FFH) and deeper (C2C3_FFH) C-states. When MWAIT is unavailable, the BIOS and OS generally negotiate to use the HALT instruction for C1, and use IO accesses for deeper C-states. This option is useful for power and performance comparisons, and also to work around BIOS bugs where broken MWAIT support is advertised. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: Create "idle=halt" bootparamZhao Yakui
"idle=halt" limits the idle loop to using the halt instruction. No MWAIT, no IO accesses, no C-states deeper than C1. If something is broken in the idle code, "idle=halt" is a less severe workaround than "idle=poll" which disables all power savings. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: Enhance /sys/firmware/interrupts to allow enable/disable/clear from ↵Zhang Rui
user-space Allow users to enable/disable/clear a specific & valid GPE/Fixed Event in user space. This is useful for debugging, especially for some interrupt storm issues. All wakeup GPEs are disabled and they can not be enabled at runtime, and we mark them as invalid. All GPEs that don't have a _Lxx/_Exx method are marked as invalid. All Fixed Events that don't have an event handler are marked as invalid and they can't be enabled until an event handler is registered. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Ling Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix mutex debug code for wrong loop termination valueBob Moore
Loop was terminating one iteration early, missing one of the debugger handshake mutexes. Linn Crosetto. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Cleanup of _PRT parsing codeBob Moore
Removed extraneous else clauses, other general cleanup. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Cleanup debug operand dump mechanismBob Moore
Eliminated unnecessary operands; eliminated use of negative index in loop. Operands now displayed in correct order, not backwards. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix for invalid large array index on 64-bit systemsBob Moore
This problem was introduced in 20080514 as a result of the elimination of the acpi_native_uint type. Code uses a negative array index, which should be eliminated. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Update DMAR and SRAT table definitionsBob Moore
Synchronized tables with current specifications. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Workaround for reversed _PRT entries from BIOSBob Moore
Some BIOSs erroneously reverse the _PRT SourceName and the SourceIndex. Detect and repair this problem. MS ACPI also allows and repairs this problem, thus ACPICA must also. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Add const qualifier for appropriate string constantsBob Moore
Mostly MODULE_NAME and printf format strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Several lint changes, no functional changesBob Moore
Remove pointer cast warnings and fix for a debug printf. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Removed unused include files from source filesBob Moore
From lint. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Eliminate acpi_native_uint type v2Bob Moore
No longer needed; replaced mostly with u32, but also acpi_size where a type that changes 32/64 bit on 32/64-bit platforms is required. v2: Fix a cast of a 32-bit int to a pointer in ACPI to avoid a compiler warning. from David Howells Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix possible negative array index in acpi_ut_validate_exceptionBob Moore
Added NULL fields to the exception string arrays to eliminate the -1 subtraction on the SubStatus field. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Fix for hang on GPE method invocationBob Moore
Fixes problem where the new method argument count validation mechanism will enter an infinite loop when a GPE method is dispatched. Problem fixed be removing the obsolete code that passes GPE block information to the notify handler via the control method parameter pointer. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPICA: Add argument count checking to control method invocation via ↵Bob Moore
acpi_evaluate_object Error if too few arguments, warning if too many. This applies only to external programmatic control method execution, not method-to-method calls within the AML. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI PM: Remove obsolete Toshiba workaroundRafael J. Wysocki
Remove the obsolete workaround for a Toshiba Satellite 4030cdt S1 problem from drivers/acpi/sleep/main.c . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ACPI PM: acpi_pm_device_sleep_state() cleanupDavid Brownell
Get rid of a superfluous acpi_pm_device_sleep_state() parameter. The only legitimate value of that parameter must be derived from the first parameter, which is what all the callers already do. (However, this does not address the fact that ACPI still doesn't set up those flags.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.Len Brown
Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: don't walk tables if ACPI was disabledVegard Nossum
Ingo Molnar wrote: > -tip auto-testing started triggering this spinlock corruption message > yesterday: > > [ 3.976213] calling acpi_rtc_init+0x0/0xd3 > [ 3.980213] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C50000 could not acquire Mutex [3] [20080321] > [ 3.992213] BUG: spinlock bad magic on CPU#0, swapper/1 > [ 3.992213] lock: c2508dc4, .magic: 00000000, .owner: swapper/1, .owner_cpu: 0 This is apparently because some parts of ACPI, including mutexes, are not initialized when acpi=off is passed to the kernel. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16Make GPE disable more robustBob Moore
Implemented another change for the GPE disable. We now perform a read-change-write of the enable register instead of simply writing out the cached enable mask. This will prevent inadvertent enabling of GPEs if a rogue GPE is received during initialization (before GPE handlers are installed.) http://bugzilla.kernel.org/show_bug.cgi?id=6217 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16acpi: fix printk format warningRandy Dunlap
Fix printk format warning: linux-next-20080617/drivers/acpi/processor_throttling.c:1258: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: fix processor throttling set errorYi Yang
http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: fix acpi fan state set errorYi Yang
Under /proc/acpi, there is a fan control interface, a user can set 0 or 3 to /proc/acpi/fan/*/state, 0 denotes D0 state, 3 denotes D3 state, but in current implementation, a user can set a fan to D1 state by any char excluding '1', '2' and '3'. For example: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on Obviously, such inputs as "" and "xxxxx" are invalid for fan state. This patch fixes this issue, it strictly limits fan state only to accept 0, 1, 2 and 3, any other inputs are invalid. Before applying this patch, the test result is: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "3x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "-1x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# After applying this patch, the test result is: [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "xxxxx" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "-1x" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "4" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3x" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ACPI: fix checkpatch.pl complaints in scan.cAlok N Kataria
http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: change processors from array to per_cpu variableMike Travis
Change processors from an array sized by NR_CPUS to a per_cpu variable. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16create sysfs link from acpi device to sysdev for cpuZhang Rui
Sys I/F under acpi device node and sysdev device node are both needed for cpu hot-removal. User space need this link so that they know they are poking the sys I/F for the same cpu. http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16force offline the processor during hot-removalZhang Rui
The ACPI device node for the cpu has already been unregistered when acpi_processor_handle_eject is called. Thus we should offline the cpu and continue, rather than a failure here. http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16fix a deadlock issue when poking "eject" fileZhang Rui
"/sys/devices/LNXSYSTM:00/.../eject" is used to evaluate _EJx method and eject a device in user space. But system hangs when poking the "eject" file because that the device hot-removal code invoke the driver .remove method which will try to remove the "eject" file as a result. Queues the hot-removal function for deferred execution in this patch. http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16Merge branch 'linus' into cpus4096Ingo Molnar
Conflicts: arch/x86/xen/smp.c kernel/sched_rt.c net/iucv/iucv.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, eliminate Kconfig specialsIngo Molnar
remove leftover traces of various VISWS related Kconfig specials. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Revert parts of "x86: update mptable"Ingo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 01:17:36 +0000