aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/Kconfig
AgeCommit message (Collapse)Author
2007-02-09[PATCH] libata: Add support for the MPC52xx ATA controllerSylvain Munaut
This patch adds initial libata support for the Freescale MPC5200 integrated IDE controller. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09[PATCH] pata_it8213: Add new driver for the IT8213 cardAlan
Add a driver for the IT8213 which is a single channel ICH-ish PATA controller. As it is very different to the IT8211/2 it gets its own driver. There is a legacy drivers/ide driver also available and I'll post that once I get time to test it all out (probably early January). If anyone else needs the drivers/ide driver and wants to do the merge for drivers/ide (Bart ??) then I'll forward it. [akpm@osdl.org: add PCI ID, constify needed_pio[]] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26Fix Maple PATA IRQ assignment.David Woodhouse
On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-05[PATCH] pata_optidma: typo in KconfigAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-16[PATCH] Fix help text for CONFIG_ATA_PIIXAlan
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[libata] ARM: add ixp4xx PATA driverAlessandro Zummo
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ata: Generic platform_device libata driverPaul Mundt
needs a changelog Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_marvell: Marvell 6101/6145 PATA driverAlan Cox
This is a legacy mode PATA driver for the 6101/45 and will also drive the SATA ports 1 & 2 in legacy mode as well if desired. Tested and confirmed working by users. The chip supports AHCI type behaviour for SATA and has a more advanced PATA interface as well so this driver will get it working but not get best performance for now. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: Winbond supportAlan Cox
Winbond 83759A support in non-multichip mode (afaik nobody ever used multichip mode anyway). The 83759 is not supported by this driver as it is already handled elsewhere and doens't use the same interfaces. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] ATA must depend on BLOCKAdrian Bunk
Fix the following compile error with CONFIG_ATA=y, CONFIG_BLOCK=n: ... CC drivers/ata/libata-scsi.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_dev_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:791: warning: implicit declaration of function ‘blk_queue_max_sectors’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘request_queue_t’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘q’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:800: warning: implicit declaration of function ‘blk_queue_max_hw_segments’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_slave_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:831: warning: implicit declaration of function ‘blk_queue_max_phys_segments’ make[3]: *** [drivers/ata/libata-scsi.o] Error 1 Bug report by Jesper Juhl. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-26[PATCH] libata: tighten rules for legacy dependanciesAlan Cox
The legacy and QDI drivers are ISA/VLB bus [we don't have a VLB define but ISA will do nicely]. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-24[PATCH] libata won't build on SUN4Al Viro
marked as such... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[PATCH] libata won't build on m68k and m32rAl Viro
no ioread*(), for one thing Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-20[libata] Delete pata_it8172 driverJeff Garzik
This MIPS platform is going away. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-06[libata] Add pata_jmicron driver to Kconfig, MakefileJeff Garzik
Someone on LKML noticed it was missing (sorry, missed the name). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[libata] Add a bunch of PATA drivers.Jeff Garzik
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24Clean up drivers/ata/Kconfig a bit.Jeff Garzik
2006-08-14libata: Make sure drivers/ata is a separate Kconfig menuJeff Garzik
Noticed by Rafael J. Wysocki Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14libata: Remove SCSI_ prefix from Kconfig symbolsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10Move libata to drivers/ata.Jeff Garzik
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 02:28:20 +0000