aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/Kconfig
AgeCommit message (Collapse)Author
2007-04-28libata/IDE: remove combined mode quirkJeff Garzik
Both old-IDE and libata should be able handle all controllers and devices found using normal resource reservation methods. This eliminates the awful, low-performing split-driver configuration where old-IDE drove the PATA portion of a PCI device, in PIO-only mode, and libata drove the SATA portion of the /same/ PCI device, in DMA mode. Typically vendors would ship SATA hard drive / PATA optical configuration, which would lend itself to slow (PIO-only) CD-ROM performance. For Intel users running in combined mode, it is now wholly dependent on your driver choice (potentially link order, if you compile both drivers in) whether old-IDE or libata will drive your hardware. In either case, you will get full performance from both SATA and PATA ports now, without having to pass a kernel command line parameter. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: Restore Kconfig updated experimental levels and correctAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28pata_cmd640: CMD640 PCI supportAlan Cox
Support for the PCI CMD640 (not VLB) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19drivers/ata/Kconfig: PATA_SCC depends on wrong platformAkira Iguchi
PATA_SCC depends on PPC_CELLEB. (not PPC_IBM_CELL_BLADE) Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21libata: Fix Cell SATA driver dependenciesJeff Garzik
The driver requires in_be32(), and so should not be built on many PCI platforms. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21libata: PATA driver for CellebAkira Iguchi
This is the patch for PATA controller of Celleb. This driver uses the managed iomap (devres). Because this driver needs special taskfile accesses, there is a copy of ata_std_softreset(). ata_dev_try_classify() is exported so that it can be used in this function. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-16[PATCH] libata: ACPI and _GTF supportKristen Carlson Accardi
_GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2007-02-09Kconfig: clarify ATA_PIIX descriptionAlan
People are getting confused about which drivers to enable for PATA PIIX type devices. Change the ATA_PIIX line and help to make it clearer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09sata_sis: Support for PATA supportsAlan
This is quick rework of the patch Uwe proposed but using Kconfig not ifdefs and user selection to sort out PATA support. Instead of ifdefs and requiring the user to select both drivers the SATA driver selects the PATA one. For neatness I've also moved the extern into the function that uses it. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09sata_inic162x: finally, driver for initio 162x SATA controllers, take #2Tejun Heo
Driver for Initio 162x SATA controllers. ATA r/w, ATAPI r, hotplug and suspend/resume work. ATAPI w (recording, that is) broken. Feel free to fix it, but be warned, this controller is weird. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09[PATCH] libata: Add support for the MPC52xx ATA controllerSylvain Munaut
This patch adds initial libata support for the Freescale MPC5200 integrated IDE controller. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09[PATCH] pata_it8213: Add new driver for the IT8213 cardAlan
Add a driver for the IT8213 which is a single channel ICH-ish PATA controller. As it is very different to the IT8211/2 it gets its own driver. There is a legacy drivers/ide driver also available and I'll post that once I get time to test it all out (probably early January). If anyone else needs the drivers/ide driver and wants to do the merge for drivers/ide (Bart ??) then I'll forward it. [akpm@osdl.org: add PCI ID, constify needed_pio[]] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26Fix Maple PATA IRQ assignment.David Woodhouse
On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-05[PATCH] pata_optidma: typo in KconfigAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-16[PATCH] Fix help text for CONFIG_ATA_PIIXAlan
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[libata] ARM: add ixp4xx PATA driverAlessandro Zummo
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] ata: Generic platform_device libata driverPaul Mundt
needs a changelog Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] pata_marvell: Marvell 6101/6145 PATA driverAlan Cox
This is a legacy mode PATA driver for the 6101/45 and will also drive the SATA ports 1 & 2 in legacy mode as well if desired. Tested and confirmed working by users. The chip supports AHCI type behaviour for SATA and has a more advanced PATA interface as well so this driver will get it working but not get best performance for now. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01[PATCH] libata: Winbond supportAlan Cox
Winbond 83759A support in non-multichip mode (afaik nobody ever used multichip mode anyway). The 83759 is not supported by this driver as it is already handled elsewhere and doens't use the same interfaces. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] ATA must depend on BLOCKAdrian Bunk
Fix the following compile error with CONFIG_ATA=y, CONFIG_BLOCK=n: ... CC drivers/ata/libata-scsi.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_dev_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:791: warning: implicit declaration of function ‘blk_queue_max_sectors’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘request_queue_t’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘q’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:800: warning: implicit declaration of function ‘blk_queue_max_hw_segments’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_slave_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:831: warning: implicit declaration of function ‘blk_queue_max_phys_segments’ make[3]: *** [drivers/ata/libata-scsi.o] Error 1 Bug report by Jesper Juhl. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-26[PATCH] libata: tighten rules for legacy dependanciesAlan Cox
The legacy and QDI drivers are ISA/VLB bus [we don't have a VLB define but ISA will do nicely]. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-24[PATCH] libata won't build on SUN4Al Viro
marked as such... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[PATCH] libata won't build on m68k and m32rAl Viro
no ioread*(), for one thing Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-20[libata] Delete pata_it8172 driverJeff Garzik
This MIPS platform is going away. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-06[libata] Add pata_jmicron driver to Kconfig, MakefileJeff Garzik
Someone on LKML noticed it was missing (sorry, missed the name). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[libata] Add a bunch of PATA drivers.Jeff Garzik
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24Clean up drivers/ata/Kconfig a bit.Jeff Garzik
2006-08-14libata: Make sure drivers/ata is a separate Kconfig menuJeff Garzik
Noticed by Rafael J. Wysocki Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14libata: Remove SCSI_ prefix from Kconfig symbolsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10Move libata to drivers/ata.Jeff Garzik