aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2009-06-08pata_netcell: Fix typoAlan Cox
The previous patch submission had a I typo I didn't catch but Bartlomiej noted. Guess this proves the point about any patch being risky late in an rc Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-05[libata] pata_ali: Use IGN_SIMPLEXAlan Cox
Some ALi devices report simplex if they have been disabled and re-enabled, and restoring the byte does not work. Ignore it - the needed supporting logic is already present for the SATA ULi ports. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05ata_piix: Add HP Compaq nc6000 to the broken poweroff listVille Syrjala
HP Compaq nc6000 suffers from the double disk spindown issue. Add it to the broken poweroff DMI list. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05ahci: add warning messages for hp laptops with broken suspendTejun Heo
Harddisks on HP dv[4-6] and HDX18 fail to come online after resume on earlier BIOSen. Fortunately, HP recently released BIOS updates for all machines to fix the issue. Detect old BIOSen, warn the user to update BIOS on boot and suspend attempts and fail suspend. Kudos to all the bug reporters. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kernel.org@epperson.homelinux.net Cc: emisca@gmail.com Cc: Gadi Cohen <dragon@wastelands.net> Cc: Paul Swanson <paul@procursa.com> Cc: s@ourada.org Cc: Trevor Davenport <trevor.davenport@gmail.com> Cc: corruptor1972 <steven_tierney@yahoo.co.uk> Cc: Victoria Wilson <mail@vwilson.co.uk> Cc: khiraly <khiraly.list@gmail.com> Cc: Sean <wollombi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05pata_efar: fix PIO2 underclockingSergei Shtylyov
Fix the PIO mode 2 using mode 0 timings -- this driver should enable the fast timing bank starting with PIO2, just like the PIIX/ICH drivers do. Also, fix/rephrase some comments while at it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05pata_legacy: wait for async probingJames Bottomley
The basic problem here that pata_legacy attaches the host, sees if it found any devices and detaches it if none were found. With async probing, it's not waiting until discovery is finished before deciding it has no devices and trying the detach leading to this warning: ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 ------------[ cut here ]------------ WARNING: at drivers/ata/libata-core.c:6222 ata_host_detach+0x75/0x90() Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.30-rc7 #1 Call Trace: [<c01fbb05>] ? ata_host_detach+0x75/0x90 [<c01fbb05>] ? ata_host_detach+0x75/0x90 [<c01139b5>] ? warn_slowpath_common+0x45/0x80 [<c01139fa>] ? warn_slowpath_null+0xa/0x10 [<c01fbb05>] ? ata_host_detach+0x75/0x90 [<c02f40e0>] ? legacy_init+0x44e/0x87f [<c02f3c92>] ? legacy_init+0x0/0x87f [<c0101021>] ? _stext+0x21/0x140 [<c01890ff>] ? proc_register+0x2f/0x190 [<c018938c>] ? create_proc_entry+0x5c/0xc0 [<c0135ebe>] ? register_irq_proc+0x6e/0x90 [<c02e6484>] ? kernel_init+0x6e/0xbf [<c02e6416>] ? kernel_init+0x0/0xbf [<c01031d7>] ? kernel_thread_helper+0x7/0x10 ---[ end trace ef1ee36e873ae3a0 ]--- Because it detaches before the probe is complete. One way to fix it would be to put an async_synchronize_full() before looking for devices, which this patch does. A better way might be to separate libata into its own domain and only wait for that. Reported-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-02pata_netcell: LBA48 force identify bits correctAlan Cox
This matches Bartlomiej's patch for ide_pci_generic: c339dfdd65b52bfd947ab29d1210314a2f6d622d In the libata case netcell has its own mini driver. I suspect this fix is actually only needed for some firmware revs but it does no harm either way. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-15libata: Media rotation rate and form factor heuristicsMartin K. Petersen
This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15libata: Report disk alignment and physical block sizeMartin K. Petersen
For disks with 4KB sectors, report the correct block size and alignment when filling out the READ CAPACITY(16) response. This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I fixed the bug I reported a while back caused by ATA and SCSI using different approaches to describing the alignment. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15sata_fsl: Fix the command description of FSL SATA controllerDave Liu
The bit 11 of command description is reserved bit in Freescale SATA controller and needs to be set to '1'. This is needed to make sure the last write from the controller to the buffer descriptor is seen before an interrupt is raised. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15sata_fsl: Fix compile warningsKumar Gala
We we build with dma_addr_t as a 64-bit quantity we get: drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg': drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15[libata] sata_sx4: fixup interrupt handlingDavid Milburn
Issuing ATA_CMD_SET_FEATURES (0xef) times out because pdc20621_interrupt ignores command completion since ATA_TFLAG_POLLING flag is set. This has already been fixed for sata_promise: commit 51b94d2a5a90d4800e74d7348bcde098a28f4fb3 Author: Tejun Heo <htejun@gmail.com> Date: Fri Jun 8 13:46:55 2007 -0700 sata_promise: use TF interface for polling NODATA commands Also, this patch includes Mikael's original patches: http://marc.info/?l=linux-ide&m=121135828227724&w=2 http://marc.info/?l=linux-ide&m=121144512109826&w=2 Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15[libata] sata_sx4: convert to new exception handling methodsJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11ata_piix: The Sony TZ90 needs the cable type hardcodingAlan Cox
The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11ata_piix: ICH7 does not support correct MWDMA timingsAlan Cox
See Errata documentation. The recommended workaround is to use PIO4 instead which will we automatically do by flagging this mode not available. Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11Avoid world-writable sysfs files in libata driver.Vitaly Mayatskikh
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11libata: fix suspend/resume for ATA SEMB devicesBorislav Petkov
79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices reporting 3c/c3 signature which belongs to SEMB devices now. However, suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails with the following: hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected sd 1:0:0:0: [sda] Starting disk ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2: limiting SATA link speed to 1.5 Gbps ata4.00: configured for UDMA/133 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2.00: disabled sd 1:0:0:0: rejecting I/O to offline device sd 1:0:0:0: [sda] START_STOP FAILED sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 PM: Device 1:0:0:0 failed to thaw: error 65536 sd 3:0:0:0: [sdb] Starting disk due to a class mismatch in ata_dev_revalidate(). Fix it by adding the ATA_DEV_SEMB device class to the check. CC: Tejun Heo <htejun@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11libata: clear ering on resumeTejun Heo
Error timestamps are in jiffies which doesn't run while suspended and PHY events during resume isn't too uncommon. When the two are combined, it can lead to unnecessary speed downs if the machine is suspended and resumed repeatedly. Clear error history on resume. This was reported and verified in bnc#486803 by Vladimir Botka. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Vladimir Botka <vbotka@novell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11pata_pdc202xx_old: fix UDMA33 handlingBartlomiej Zolnierkiewicz
The original driver doesn't use 66 MHz clock for UDMA33. [ The alternative solution would be to adjust UDMA33 timings for 66 MHz clock but I think that it is safer to stick with old & tested behavior for now. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11sata_mv: use new sata phy register settings for new devicesMartin Michlmayr
Marvell's new SoC (65 nano) needs different settings for its SATA PHY registers. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11libata: fix attach error handlingTejun Heo
New device attach path in ata_eh_revalidate_and_attach() is divided into two separate loops because ATA requires IDENTIFY to be issued to slave first while the user expects to see device probe messages from the master device. new_mask is used to track which devices are the new ones between the first loop and the second. This usually works well but if an error occurs during configuration stage, ata_dev_revalidate_and_attach() returns with error code and forgets new_mask. On the retry run, dev->class is set and new_mask for the device is clear, so the device just gets revalidated and thus ends up skipping post-configuration procedure including scheduling of SCSI_HOTPLUG for the device. When this occurs, ATA part of probing works fine but SCSI probing usually doesn't happen and makes the device unreachable. The behavior has been around for a very long time but it has been uncovered with the recent addition of 1_5_GBPS horkage which uses -EAGAIN return value from ata_dev_configure() to restart the probing sequence after forcing cable speed. This can be fixed by making sure dev->class is permanently set only after all configurations are successfully complete. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tim Connors <tconnors+linuxkml@astro.swin.edu.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17[libata] fix build error on drivers/ata/pata_legacy.cZhenwen Xu
fix those errors: drivers/ata/pata_legacy.c: In function ‘pdc_data_xfer_vlb’: drivers/ata/pata_legacy.c:289: error: ‘ap’ undeclared (first use in this function) drivers/ata/pata_legacy.c:289: error: (Each undeclared identifier is reported only once drivers/ata/pata_legacy.c:289: error: for each function it appears in.) drivers/ata/pata_legacy.c: At top level: drivers/ata/pata_legacy.c:869: error: ‘ATA_PFLAG_PIO32_CHANGE’ undeclared here (not in a +function) make[2]: *** [drivers/ata/pata_legacy.o] Error 1 make[1]: *** [drivers/ata] Error 2 Signed-off-by: Zhenwen Xu <helight.xu@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17pata_via: Cache and rewrite the device bitAlan Cox
Some VIA chipsets will reset the DEV bit after IEN changes on ctl. Our optimised write path avoids doing this but we need to remove the optimisation on these devices. [Identified and some original patches proposed by Josehn Chan @ VIA but discussion then all ground to a halt so given a test case I dug it back out] Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk Tested-by: Christoph Bisping (bug #13086) Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17sata_mv: workaround for multi_count errata sata24Mark Lord
Workaround for errata SATA#24 in sata_mv. This errata affects WRITE_MULTI* commands when the device multi_count produces a DRQ block size >= 4Kbytes. We work around it here by converting such operations into ordinary PIO_WRITEs instead. Note that this might result in a PIO FUA write unavoidably being converted into a non-FUA write. In practice, any system using FUA is also going to be using DMA rather than PIO, so this shouldn't affect anyone in the real world. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17sata_mv: tidy up qc->tf usage in qc_prep() functionsMark Lord
Tidy up qc->tf accesses in the mv_qc_prep() functions. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-16ata: Report 16/32bit PIO as best we canAlan Cox
The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-16libata: use ATA_ID_CFA_*Sergei Shtylyov
Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-16pata_legacy: fix no device fail pathTejun Heo
When pata_legacy can't detect any device, it unregisters the platform_device and fails detection. However, it forgets to detach ata host triggering weird failures as the host later gets freed by devres while still attached. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-16pata_hpt37x: fix HPT370 DMA timeoutsSergei Shtylyov
The libata driver has copied the code from the IDE driver which caused a post 2.4.18 regression on many HPT370[A] chips -- DMA stopped to work completely, only causing timeouts. Now remove hpt370_bmdma_start() for good... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-16libata: handle SEMB signature betterTejun Heo
WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Haun <drhaun88@gmail.com> Reported-by: Lars Wirzenius <liw@liw.fi> Reported-by: Juan Manuel <jmcarranza@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-13ata: fix obviously wrong commentVegard Nossum
Also remove the now-useless debug printouts which are supposed to tell us when the scan starts and ends. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-13ahci: force CAP_NCQ for earlier NV MCPsTejun Heo
Along with MCP65, MCP67 and 73 also don't set CAP_NCQ. Force it. Reported by zaceni@yandex.ru on bko#13014 and confirmed by Peer Chen. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: NightFox <zaceni2@yandex.ru> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-13[libata] sata_via: kill uninit'd var warningJeff Garzik
Reported and initial patch by Marin Mitov. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-07Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: shorten register names sata_mv: workaround errata SATA#13 sata_mv: cosmetic renames sata_mv: workaround errata SATA#26 sata_mv: workaround errata PCI#7 sata_mv: replace 0x1f with ATA_PIO4 (v2) sata_mv: fix irq mask races sata_mv: revert SoC irq breakage libata: ahci enclosure management bios workaround ata: Add TRIM infrastructure ata_piix: VGN-BX297XP wants the controller power up on suspend libata: Remove some redundant casts from pata_octeon_cf.c pata_artop: typo
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06sata_mv: shorten register namesMark Lord
Rename a slew of register name constants in sata_mv, removing the _OFS suffix from them, and shortening some of them in other ways as well. Also, bump up the version number to reflect all recent changes. In theory, no actual changes to the generated code, other than the version number bump. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06sata_mv: workaround errata SATA#13Mark Lord
Add remainder of workaround for errata SATA#13. This prevents writes of certain adjacent 32-bit registers from being combined into single 64-bit writes, which might fail for the affected registers. Most of sata_mv is already safe from this issue, but adding this code to mv_write_cached_reg() will catch the remaining cases and hopefully prevent future ones. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06sata_mv: cosmetic renamesMark Lord
Add _OFS suffix to more of the register offset names, for consistency with the rest of the driver. Also tag the defines for LTMODE and PHY_MODE4 to note that read-after-write is necessary when updating those regs. No code changes here. [NOTE: this commit is undone a few commits later] Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06sata_mv: workaround errata SATA#26Mark Lord
Workaround for errata SATA#26. Prevents accidently putting a drive to sleep when attempting COMRESET, by ORing 0xf000 with the values written to SCR_CONTROL. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06sata_mv: workaround errata PCI#7Mark Lord
Workaround for 60x1-B2 errata PCI#7. Write-combining may be unreliable when chip operates in PCI-X mode, so disable write-combining when in PCI-X mode. Also, update the errata comments at the top of sata_mv, and include a note about errata PCI#11. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06sata_mv: replace 0x1f with ATA_PIO4 (v2)Mark Lord
Cosmetic change: replace .pio_mask=0x1f with .pio_mask=ATA_PIO4 everywhere. Originally from Erik Inge Bolsø, now reworked for latest sata_mv. Signed-off-by: Erik Inge Bolsø <knan-lkml@anduin.net> Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06sata_mv: fix irq mask racesMark Lord
Prevent racing on the main interrupt mask during port_start and port_stop. Otherwise, we end up with IRQs masked on inactive ports, and hotplug insertions then get missed later on. Found while debugging (out of tree) target mode operations, but the bug is present and impacting mainline as well. This patch should also be considered for -stable. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06sata_mv: revert SoC irq breakageMark Lord
Revert most of commit 6be96ac1d5e4d913e1f48299db083ada5321803b2, originally from Lennert Buijtenheck (Marvell) and Saeed Bishara (Marvell), since that commit causes sata_mv to oops at startup on SOC "Kirkwood". The SOC variants do not have the hpriv->irq_{cause,mask}_ofs registers, so don't try to write to them! This patch should also be considered for -stable. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06libata: ahci enclosure management bios workaroundDavid Milburn
During driver initialization ahci_start_port may not be able to turn LEDs off because the hardware may still be transmitting a message. And since the BIOS may not be setting the LEDs to off the drive LEDs may end up in a fault state. This has been seen on ICH9r and ICH10r when configured in AHCI mode instead of RAID mode, this patch doesn't key off a specific set of device IDs but will give the EM transmit bit a chance to clear if busy. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06ata_piix: VGN-BX297XP wants the controller power up on suspendTejun Heo
Sony VGN-BX297XP fails suspend if the controller is powered down when calling into ACPI suspend. Add the machine to piix_broken_suspend list. This problem was reported by GNUtoo@no-log.org on bko#10293. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: GNUtoo@no-log.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06libata: Remove some redundant casts from pata_octeon_cf.cDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-25Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel