aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2007-02-02libata: Initialize nbytes for internal sg commandsBrian King
Some LLDDs, like ipr, use nbytes and pad_len to determine the total data transfer length of a command. Make sure nbytes gets initialized for internally generated commands. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02pata_via: Correct missing commentsAlan
The 8237S was added to the chipsets but not to the comments. Fix this Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02pata_atiixp: propogate cable detection hack from drivers/ide to the new driverAlan
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02ahci/pata_jmicron: fix JMicron quirkTejun Heo
For all JMicrons except for 361 and 368, AHCI mode enable bits in the Control(1) should be set. This used to be done in both ahci and pata_jmicron but while moving programming to PCI quirk, it was removed from ahci part while still left in pata_jmicron. The implemented JMicron PCI quirk was incorrect in that it didn't program AHCI mode enable bits. If pata_jmicron is loaded first and programs those bits, the ahci ports work; otherwise, ahci device detection fails miserably. This patch makes JMicron PCI quirk clear SATA IDE mode bits and set AHCI mode bits and remove the respective part from pata_jmicron. Tested on JMB361, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix translation for START STOP UNIT libata-scsi: ata_task_ioctl should return ATA registers from sense data pata_platform: set_mode fix ata_if_xfermask() word 51 fix pata_sil680: PIO1 taskfile transfers overclocking fix (repost) libata: fix ata_eh_suspend() return value ahci: port_no should be used when clearing IRQ in ahci_thaw() Fix trivial conflict in drivers/ata/pata_platform.c manually
2007-01-30Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support for CX700 and 8237S ide: unregister idepnp driver on unload ide: add missing __init tags to IDE PCI host drivers ia64: add pci_get_legacy_ide_irq() ide/generic: Jmicron has its own drivers now atiixp.c: add cable detection support for ATI IDE atiixp.c: sb600 ide only has one channel atiixp.c: remove unused code jmicron: fix warning ide: update MAINTAINERS entry
2007-01-30[PATCH] pata_platform: fallout from set_mode() changeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-30libata: fix translation for START STOP UNITRobert Hancock
libata's SCSI translation for the SCSI START STOP UNIT command with the START bit clear (i.e. stopping the drive) appears to be incorrect. It sends an ATA STANDBY command with the time period set to 0, which the code comment says means "now", but the ATA standard says this means disable the standby timer, which effectively does nothing. Change this to issue a STANDBY IMMEDIATE command which will actually spin the drive down. The SAT (SCSI/ATA Translation) standard revision 9 concurs with this choice. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30libata-scsi: ata_task_ioctl should return ATA registers from sense dataDavid Milburn
User applications using the HDIO_DRIVE_TASK ioctl through libata expect specific ATA registers to be returned to userspace. Verified that ata_task_ioctl correctly returns register values to the smartctl application. Signed-off-by: David Milburn <dmilburn@redhat.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30pata_platform: set_mode fixAndrew Morton
drivers/ata/pata_platform.c:85: warning: initialization from incompatible pointer type Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30ata_if_xfermask() word 51 fixLennert Buytenhek
If word 53 bit 1 isn't set, the maximum PIO mode is indicated by the upper 8 bits of word 51, not the lower 8 bits. Fixes PIO mode detection on old Compact Flash cards. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30pata_sil680: PIO1 taskfile transfers overclocking fix (repost)Sergei Shtylyov
Fix PIO mode 1 overclocked taskfile transfers -- probably a typo carried over from drivers/ide/pci/siimage.c where I've found it by documentation check... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-27via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support ↵Josepch Chan
for CX700 and 8237S This patch: * Corrects the wrong device ID of PCI_DEVICE_ID_VIA_SATA_EIDE from 0x0581 to 0x5324. * Adds VIA CX700 and VT8237S support in drivers/ide/pci/via82cxxx.c * Adds VIA VT8237S support in drivers/ata/pata_via.c Signed-off-by: Josepch Chan <josephchan@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27libata: fix ata_eh_suspend() return valueTejun Heo
ata_eh_suspend() was returning 0 regardless of failure. This bug has potential to lose data on suspend. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-27ahci: port_no should be used when clearing IRQ in ahci_thaw()Tejun Heo
ap->id is logcial port ID which is unique among all ATA ports and doesn't have anything to do with hardware port index. ap->port_no is the hardware port index and thus should be used when clearing IRQ mask in ahci_thaw(). This problem has been spotted by Jeff Garzik <jgarzik@pobox.com>. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26Fix Maple PATA IRQ assignment.David Woodhouse
On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26ahci: use 0x80 as wait stat value instead of 0xffTejun Heo
Before hardreset, ahci initialized stat part of received FIS area to 0xff to wait for the first D2H Reg FIS which would change the value to device ready state. This used to work but now libata considers status value of 0xff as device not present making this wait prone to failure. This patch makes ahci use 0x80 for the wait stat value instead of 0xff to fix the above problem. Signed-off-by: Tejun Heo <htejun@gmail.com> drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26sata_via: style clean up, no indirect method call in LLDTejun Heo
Call ata_bmdma_irq_clear() directly instead of through ap->ops->irq_clear() according to libata style guideline. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26ahci: fix endianness in spurious interrupt messageTejun Heo
Fix endianness in spurious interrupt message. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25libata-sff: Don't call bmdma_stop on non DMA capable controllersAlan
Fixes bogus accesses to ports 0-15 with a non DMA capable controller. This I think should go in for 2.6.20 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uliTejun Heo
Some uli controllers have stuck SIMPLEX bit which can't be cleared with ata_pci_clear_simplex(), but the controller is capable of doing DMAs on both channels simultaneously. Implement ATA_FLAG_IGN_SIMPLEX which makes libata ignore the simplex bit and use it in sata_uli. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25ahci: improve and limit spurious interrupt messages, take#3Tejun Heo
We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25sata_via: don't diddle with ATA_NIEN in ->freezeTejun Heo
vt6420 completely loses its ability to raise IRQ for ATAPI devices if ATA_NIEN is diddled with in ->freeze. Further investigation is necessary to determine whether this problem is shared on other controllers but it doesn't seem to be at this point. Make vt6420's ->freeze only clear IRQ to fix this problem. This makes vt6420 relatively more prone to IRQ storms but the controller is way too braindamaged to worry about that anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-24libata: set_mode, Fix the FIXMEAlan
When set_mode() changed ->set_mode didn't adapt. This makes the needed changes and removes the relevant FIXME case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-24libata hpt3xn: Hopefully sort out the DPLL logic versus the vendor codeAlan
Rather than ending up with two layers of negation jut rename the variable and lose one. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-24libata cmd64x: whack into a shape that looks like the documentationAlan
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-24libata: Fixup n_elem initializationBrian King
Fixup the inialization of qc->n_elem. It currently gets initialized to 1 for commands that do not transfer any data. Fix this by initializing n_elem to 0 and only setting to 1 in ata_scsi_qc_new when there is data to transfer. This fixes some problems seen with SATA devices attached to ipr adapters. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-24ahci: don't enter slumber on power downTejun Heo
Some ATA/ATAPI devices act weirdly after the link is put into slumber mode. Some hang completely requiring physical power removal while others fail to wake up till the link is hardreset a couple of times. The addition of slumber on power down was never driven by real need. It just followed what ahci spec said literally. The spec itself seems faulty in that it doesn't consider devices (not controllers) which don't support link powersaving mode. Theory never matches reality when it comes to dark allys of cheap ATA/ATAPI world. It's just unrealistic to expect vendors to test rarely used link powersaving feature rigorously. This patch makes ahci more friendly to the coldness of reality. This shouldn't have any negative effect - when suspend operation succeeds, we power off the whole machine; otherwise, we wake up everything. I can't see any reason to be so elaborate with powering down the link in the first place. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-24sata_nv: don't rely on NV_INT_DEV indication with ADMARobert Hancock
Several people reported issues with certain drive commands timing out on sata_nv controllers running in ADMA mode. The commands in question were non-DMA-mapped commands, usually FLUSH CACHE or FLUSH CACHE EXT. From experimentation it appears that the NV_INT_DEV indication isn't always set when a legitimate command completion interrupt is received on a legacy-mode command, at least not on these controllers in ADMA mode. When a command is pending on the port, force the flag on always in the irq_stat value before calling nv_host_intr so that the drive busy state is always checked by ata_host_intr. This also fixes some questionable code in nv_host_intr which called ata_check_status when a command was pending and ata_host_intr returned "unhandled". If the device interrupted at just the wrong time this could cause interrupts to be lost. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-24ahci: make ULi M5288 ignore interface fatal error bitTejun Heo
As with JMicron controllers, ULi M5288 sets interface fatal error bit on device error including ATAPI CC. This makes libata hardreset the port on ATAPI CC thus making it impossible to use. Ignore interface fatal error bit on ULi M5288. This fixes bugzilla bug #7837. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-19sata_mv HighPoint 2310 support (88SX7042)Olof Johansson
With the following patch, my HighPoint 2310 with a Marvell 88SX7042 on it seems to work OK. The controller only has 4 ports, with MV_FLAG_DUAL_HC it seems to init 8 ports and fails miserably at probe time. There are no other devices mapped to that chip, maybe it was just incorrectly specified in the first place? Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-19libata: fix handling of port actions in per-dev action maskTejun Heo
libata EH ignores port-wide actions in per-dev action mask. However, device resume requests EH_SOFTRESET using per-dev action mask. Under certain circumstances, this results in not resetting frozen port after resuming which causes failure of all commands. This patch allows port-wide actions to be requested in per-dev action mask. Before EH recovery starts, port-wide actions will be collected. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-19sata_via: add PCI ID 0x5337Luca Pedrielli
Add PCI ID 0x5337 to supported PCI ID. This is VT8237 in IDE mode. Signed-off-by: Luca Pedrielli <luca.pedrielli@barradev.it> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-05[PATCH] hpt37x: Two important bug fixesAlan
The HPT37x driver very carefully handles DMA completions and the needed fixups are done on pci registers 0x50 and 0x52. This is unfortunate because the actual registers are 0x50 and 0x54. Fixing this offset cures the second channel problems reported. Secondly there are some problems with the HPT370 and certain ATA drives. The filter code however only filters ATAPI devices due to a reversed type check. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] pata_optidma: typo in KconfigAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-02[PATCH] libata: fix combined modeAlan
This is a slight variant on the patch I posted December 16th to fix libata combined mode handling. The only real change is that we now correctly also reserve BAR1,2,4. That is basically a neatness issue. Jeff was unhappy about two things 1. That it didn't work in the case of one channel native one channel legacy. This is a silly complaint because the SFF layer in libata doesn't handle this case yet anyway. 2. The case where combined mode is in use and IDE=n. In this case the libata quirk code reserves the resources in question correctly already. Once the combined mode stuff is redone properly (2.6.21) then the entire mess turns into a single pci_request_regions() for all cases and all the ugly resource hackery goes away. I'm sending this now rather than after running full test suites so that it can get the maximal testing in a short time. I'll be running tests on this after lunch. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alessandro Suardi <alessandro.suardi@gmail.com> Acked-by: Theodore Tso <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-20[libata] sata_svw, sata_vsc: kill iomem warningsJeff Garzik
Now that iomap merge is close to reality, and since the warnings and issue have been around so long, we don't need a reminder on every build that libata needs to be converted over to iomap. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-20[PATCH] libata: take scmd->cmd_len into account when translating SCSI commandsTejun Heo
libata depended on SCSI command to have the correct length when tranlating it into an ATA command. This generally worked for commands issued by SCSI HLD but user could issue arbitrary broken command using sg interface. Also, when building ATAPI command, full command size was always copied. Because some ATAPI devices needs bytes after CDB cleared, if upper layer doesn't clear bytes after CDB, such devices will malfunction. This necessiated recent clear-garbage-after-CDB fix in sg interfaces. However, scsi_execute() isn't fixed yet and HL-DT-ST DVD-RAM GSA-H30N malfunctions on initialization commands issued from SCSI. This patch makes xlat functions always consider SCSI cmd_len. Each translation function checks for proper cmd_len and ATAPI translaation clears bytes after CDB. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Douglas Gilbert <dougg@torque.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-20[PATCH] libata: kill @cdb argument from xlat methodsTejun Heo
xlat function will be updated to consider qc->scsicmd->cmd_len and many xlat functions deference qc->scsicmd already. It doesn't make sense to pass qc->scsicmd->cmnd as @cdb separately. Kill the argument. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-20[PATCH] libata: clean up variable name usage in xlat related functionsTejun Heo
Variable names in xlat functions are quite confusing now. 'scsicmd' is used for CDB while qc->scsicmd points to struct scsi_cmnd while 'cmd' is used for struct scsi_cmnd. This patch cleans up variable names in xlat functions such that 'scmd' is used for struct scsi_cmnd and 'cdb' for CDB. Also, 'scmd' local variable is added if qc->scsicmd is used multiple times. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-20[libata] Move some PCI IDs from sata_nv to ahciPeer Chen
The content of memory map io of BAR5 have been change from MCP65 then sata_nv can't work fine on the platform based on MCP65 and MCP67, so move their IDs from sata_nv.c to ahci.c. Signed-off-by: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-20[libata] pata_via: suspend/resume support fixAndrew Morton
Make this array static so it doesn't have to be built at runtime. Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-20[libata] pata_cs5530: suspend/resume support tweakAndrew Morton
side-effectful-expression-within-assert give me the creeps. Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] pata_via: Cable detect errorAlan
The UDMA66 VIA hardware has no controller side cable detect bits we can use. This patch minimally fixes the problem by reporting unknown in this case and using drive side detection. The old drivers/ide code does some additional tricks but those aren't appropriate now we are in -rc. Without this update UDMA66 via controllers run slowly. They don't fail so it's a borderline call whether this is -rc material or not. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] Fix help text for CONFIG_ATA_PIIXAlan
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] initializer entry defined twice in pata_rz1000Ira Snyder
This removes the extra definition of the .error_handler member in the pata_rz1000 driver. Signed-off-by: Ira W. Snyder <kernel@irasnyder.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata: fix platform_device_register_simple() error checkAkinobu Mita
The return value of platform_device_register_simple() should be checked by IS_ERR(). Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ahci: do not mangle saved HOST_CAP while resetting controllerTejun Heo
Do not mangle with HOST_CAP while resetting controller. The code is there for a historical reason. The mangling breaks controller feature detection and 0 PORTS_IMPL workaround code. This problem was spotted by Manoj Kasichainula. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Manoj Kasichainula <manoj@io.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)Tejun Heo
Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)Jeff Garzik
Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>