aboutsummaryrefslogtreecommitdiff
path: root/drivers/char/ipmi
AgeCommit message (Collapse)Author
2006-02-03[PATCH] IPMI: fix issues reported by Coverity in ipmi_msghandler.cJayachandran C
While looking to the report by Coverity in ipmi, I came across the following issue: The IPMI message handler relies on two defines which are the same -one in include/linux/ipmi.h #define IPMI_NUM_CHANNELS 0x10 and one in drivers/char/ipmi/ipmi_msghandler. #define IPMI_MAX_CHANNELS 16 These are used interchangeably in ipmi_msghandler.c, but since the array addr->channels[] is of size IPMI_MAX_CHANNELS, I have made a patch that uses IPMI_MAX_CHANNELS for all the checks for the array index. NOTE: You could probably remove the line that defines IPMI_NUM_CHANNELS from ipmi.h, or move IPMI_MAX_CHANNELS to ipmi.h Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ipmi: mem_{in,out}[bwl] => intf_mem_{in,out}[bwl]Alexey Dobriyan
On mips: drivers/char/ipmi/ipmi_si_intf.c:1274: error: conflicting types for 'mem_inb' include/asm/io.h:436: error: previous definition of 'mem_inb' was here Don't look at line 436 unless you really know what you're doing. Move those static functions out of more or less generic namespace. Signed-off-by: Alexey "## should be banned" Dobriyan <adobriyan@gmail.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] IPMI: remove invalid acpi register spacing checkRocky Craig
At the 2.6.12 timeframe ipmi_si_intf.c was patched to provide default register spacings in try_init_acpi() if the register spacing was set to zero, similar to code in other routines. Unfortunately, another patch was simultaneously added that exits early from try_init_acpi() if the register spacings are set to zero, circumventing the new defaults. This patch removes the early exit code and some incorrect comments that aren't present in other common code snippets. Signed-off-by: Rocky Craig <rocky.craig@hp.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] ipmi: use CONFIG_DMI instead of CONFIG_X86Matt Domsch
With Andi Kleen's x86_64 patch to use DMI, and my ia64 to use DMI, there is now a new CONFIG_DMI option which takes the place of CONFIG_X86 to denote the availability of the DMI functions. Make the IPMI driver use CONFIG_DMI instead. Tested on ia64 2.6.15 kernel plus the previous patch, on a Dell PowerEdge 7250 Itanium2 server, and it now autodetects the IPMI KCS driver as expected. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] ipmi: fix compile errors with PROC_FS=nAdrian Bunk
... CC [M] drivers/char/ipmi/ipmi_msghandler.o drivers/char/ipmi/ipmi_msghandler.c:3301: `proc_ipmi_root' undeclared here (not in a function) drivers/char/ipmi/ipmi_msghandler.c:3301: initializer element is not constant drivers/char/ipmi/ipmi_msghandler.c:3301: (near initialization for `__ksymtab_proc_ipmi_root.value') drivers/char/ipmi/ipmi_msghandler.c:1535: warning: `ipmb_file_read_proc' defined but not used drivers/char/ipmi/ipmi_msghandler.c:1551: warning: `version_file_read_proc' defined but not used drivers/char/ipmi/ipmi_msghandler.c:1561: warning: `stat_file_read_proc' defined but not used ... CC [M] drivers/char/ipmi/ipmi_poweroff.o drivers/char/ipmi/ipmi_poweroff.c: In function `ipmi_poweroff_init': drivers/char/ipmi/ipmi_poweroff.c:616: warning: implicit declaration of function `unregister_sysctl_table' drivers/char/ipmi/ipmi_poweroff.c:616: `ipmi_table_header' undeclared (first use in this function) drivers/char/ipmi/ipmi_poweroff.c:616: (Each undeclared identifier is reported only once drivers/char/ipmi/ipmi_poweroff.c:616: for each function it appears in.) Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] fix remaining list_for_each_safe_rcu in -mm (take 2)Paul E. McKenney
I missed a use of list_for_each_rcu_safe() in -mm tree. Here is an updated patch to fix it. This time tested on a machine that actually uses IPMI... (Thanks to Serge Hallyn for spotting this.) Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Corey Minyard <minyard@acm.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15[PATCH] IPMI oops fixPaolo Galtieri
While doing some testing I discovered that if the BIOS on a board does not properly setup the DMI information it leads to a panic in the IPMI code. The panic is due to dereferencing a pointer which is not initialized. The pointer is initialized in port_setup() and/or mem_setup() and used in init_one_smi() and cleanup_one_si(), however if either port_setup() or mem_setup() return ENODEV the pointer does not get initialized. Signed-off-by: Paolo Galtieri <pgaltieri@mvista.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] ipmi: fix panic generator IDMatt Domsch
The IPMI specifcation says the generator ID is 0x20, but that is for bits 7-1. Bit 0 is set to specify it is a software event. The correct value is 0x41. Without this fix, panic events written into the System Event Log appear to come from an "unknown" generator, rather than from the kernel. Signed-off-by: Jordan Hargrave <Jordan_Hargrave@dell.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-18[PATCH] ipmi: missing NULL test for kthreadMatt Domsch
On IPMI systems with BT interfaces, we don't start the kernel thread, so smi_info->thread is NULL. Test for NULL when stopping the thread, because kthread_stop() doesn't, and an oops ensues otherwise. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-15[PATCH] ipmi: bump-driver-versionCorey Minyard
Lots of good changes to the driver lately that userspace will care about the version of the driver. Bump the version from 36.0 to 38.0 to be higher than 37 that the 2.4 driver came out with a few weeks ago which doesn't have all the same changes. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11[PATCH] ipmi: fix inconsistent spinlock usageHironobu Ishii
Part of a patch was accidentally reverted, this corrects an inconsistent spinlock use in the IPMI message handler. Signed-off-by: Hironobu Ishii <hishii@soft.fujitsu.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: fix watchdog timeout panic handlingCorey Minyard
If a panic came from the IPMI watchdog pretimeout and that was reported via an NMI, it would also be reported via the standard IPMI flags, which would get picked up when reporting panic events and cause another panic. This adds an atomic to avoid calling panic twice. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: use rcu lock for using command receiversCorey Minyard
Use rcu_read_lock for the cmd_rcvrs list, since that was what what intended, anyway. This means that all the users of the cmd_rcvrs_lock are tasks, so the irq disables are no longer required for that lock and it can become a semaphore. Signed-off-by: Corey Minyard <minyard@acm.org> Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: use kthread APIMatt Domsch
Convert ipmi driver thread to kthread API, only sleep when interface is idle. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: add timer threadCorey Minyard
We must poll for responses to commands when interrupts aren't in use. The default poll interval is based on using a kernel timer, which varies with HZ. For character-based interfaces like KCS and SMIC though, that can be way too slow (>15 minutes to flash a new firmware with KCS, >20 seconds to retrieve the sensor list). This creates a low-priority kernel thread to poll more often. If the state machine is idle, so is the kernel thread. But if there's an active command, it polls quite rapidly. This decrease a firmware flash time from 15 minutes to 1.5 minutes, and the sensor list time to 4.5 seconds, on a Dell PowerEdge x8x system. The timer-based polling remains, to ensure some amount of responsiveness even under high user process CPU load. Checking for a stopped timer at rmmod now uses atomics and del_timer_sync() to ensure safe stoppage. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: kcs error0 delayCorey Minyard
BMCs can get into ERROR0 state while flashing new firmware, particularly while the BMC is erasing the next flash block, which may take a just under 2 seconds on a Dell PowerEdge 2800 (1.75 seconds typical), during which time the single-threaded firmware may not be able to process new commands. In particular, clearing OBF may not take effect immediately. We want it to delay in ERROR0 after clearing OBF a bit waiting for OBF to actually be clear before proceeding. This introduces a new return value from the LLDD's event loop, SI_SM_CALL_WITH_TICK_DELAY. This means the calling thread/timer should schedule_timeout() at least 1 tick, rather than busy-wait. This is a longer delay than SI_SM_CALL_WITH_DELAY, which is typically a 250us busy-wait. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: bt restart reset fixesCorey Minyard
The current BT retry/reset mechanism fails to succeed on a PowerEdge 1650, when the controller is wedged with B2H_ATN asserted at XACTION_START. If this occurs, no further commands will ever succeed unless the state of the controller is first cleared out. Furthermore, the soft reset would only occur if the first command after insmod was the one that timed out, not if a later command timed out. This patch changes the retry/reset mechanism to be as follows: Before retrying a command, clear the state of the BT controller such that the flags represent ready for a new transaction. This increases the chance of success of the restarted transaction. After 2 retries, issue a soft reset and retry one more time before giving up and reporting back a failure. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Rocky Craig <rocky.craig@hp.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: si start transaction hookCorey Minyard
Some commands, on some system BMCs, don't respond at at all. This is seen on Dell PowerEdge x6xx and x7xx systems with IPMI 1.0 BT controllers when a "Get SDR" command is issued, with a length field of 0x3A, which happens to be the length of about SDR entries. If another length is passed, this command succeeds. This patch adds general infrastructure for receiving commands before they're passed down to the low-level drivers, such that they can be completed immediately, or modified, prior to being sent to ->start_transaction(). Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: more dell fixesCorey Minyard
Make SMIC driver ignore EVT_AVAIL and SMS_ATN bits in flags register, as they're used by systems management interrupts, not the host OS. Make the OEM0 Data Available handler work for pre-IPMI 1.5 systems from Dell too. Without these two fixes, PowerEdge 2650 and other similar systems with SMIC may hang a process (modprobe or anything using /dev/ipmi0). Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: poweroff cleanupsCorey Minyard
Make module_param and MODULE_PARAM_DESC agree on poweroff_powercycle name. There was an extraneous ifdef in the IPMI poweroff code that prevented it from working if PROC_FS was disabled. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: watchdog parms in sysfsCorey Minyard
Modify the IPMI watchdog parameters (the ones that make sense) to be exported from sysfs. This is somewhat complicated because these parameters have side-effects that must be handled. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: various si cleanupCorey Minyard
A number of small changes for the various system interface drivers, consolidated from a number of patches from Matt Domsch. Clear B2H_ATN and drain the BMC message buffer on command timeout. This prevents further commands from failing after a timeout. Add bt_debug and smic_debug module parameters, expose them in sysfs. This lets you enable and disable debugging messages at runtime. Unsigned jiffies math in ipmi_si_intf.c causes a too-large value to be passed to ->event() after jiffies wrap-around. The BT driver had caught this, but didn't know how to fix it. Now all calls to ->event() use a sane value for time. Increase timeout for commands handed to the BT driver from 2 seconds to 5 seconds. This is necessary particularly when the previous command was a "Clear SEL", as that command completes, yet the BMC isn't really ready to handle another command yet. Silence BT debugging messages which were being printed on the console. Increase SMIC timeout form 1/10s to 2s. This is needed on Dell PowerEdge 2650 and PowerEdge 750 with ERA/O cards to allow commands to complete without timing out. Adds kcs_debug module param, to match behavior of BT and SMIC. This also prevents messages from being sent to the console unless explicitly requested. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ipmi: use refcount in message handlerCorey Minyard
This patch is rather large, but it really can't be done in smaller chunks easily and I believe it is an important change. This has been out and tested for a while in the latest IPMI driver release. There are no functional changes, just changes as necessary to convert the locking over (and a few minor style updates). The IPMI driver uses read/write locks to ensure that things exist while they are in use. This is bad from a number of points of view. This patch removes the rwlocks and uses refcounts and RCU lists to manage what the locks did. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] Driver Core: fix up all callers of class_device_create()Greg Kroah-Hartman
The previous patch adding the ability to nest struct class_device changed the paramaters to the call class_device_create(). This patch fixes up all in-kernel users of the function. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-28[PATCH] Add IPMI poweroff control to sysfsCorey Minyard
Put the IPMI poweroff_powercycle parameter into sysfs. This field is dynamically settable and is valuable to have in sysfs. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23[PATCH] ipmi_msghandler: inconsistent spin_lock usageHironobu Ishii
I found an inconsistent spin_lock usage in ipmi_smi_msg_received. Signed-off-by: Hironobu Ishii <hishii@soft.fujitsu.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] drivers/char: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] trivial __user annotations (ipmi)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08Merge linux-2.6 with linux-acpi-2.6Len Brown
2005-09-07[PATCH] ipmi poweroff: fix chassis controlCorey Minyard
The IPMI power control function proc_write_chassctrl was badly written, it directly used userspace pointers, it assumed that strings were NULL terminated, and it used the evil sscanf function. This converts over to using the sysctl interface for this data and changes the semantics to be a little more logical. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: remove unused fieldsCorey Minyard
This removes the unused "all_cmd_rcvr" variable from the IPMI driver. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: style cleanupsCorey Minyard
Clean up various style issues in the IPMI driver. Should be no functional changes. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: add hacks for IPMI chassis poweroff for certain Dell serversCorey Minyard
This patch allows Dell servers with IPMI controllers that predate IPMI 1.5 to use the standard poweroff or powercycle commands. These systems firmware don't set the chassis capability bit in the Get Device ID, but they do implement the standard poweroff and powercycle commands. Tested on RHEL3 kernel 2.4.21-20.ELsmp on a PowerEdge 2600. The standard ipmi_poweroff driver cannot drive these systems. With this patch, they power off or powercycle as expected. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: fix panic ipmb responseCorey Minyard
The "null message handler" in the IPMI driver is used in startup and panic situations to handle messages. It was only designed to work with messages from the local management controller, but in some cases it was used to get messages from remote managmenet controllers, and the system would then panic. This patch makes the "null message handler" in the IPMI driver more general so it works with any kind of message. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: clean up versioning of the IPMI driverCorey Minyard
This adds MODULE_VERSION, MODULE_DESCRIPTION, and MODULE_AUTHOR tags to the IPMI driver modules. Also changes the MODULE_VERSION to remove the prepended 'v' on each value, consistent with the module versioning policy. This patch also removes all the version information from everything except the ipmi_msghandler module. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: OEM flag handling and hacks for some Dell machinesCorey Minyard
The ipmi driver does not have a way to handle firmware-generated events which have the OEM[012] Data Available flags set. In such a case, the SMS_ATN bit may never get cleared by firmware, leaving the driver looping infinitely but never able to make any progress. This patch first simplifies storage and use of the data returned from an IPMI Get Device ID command. It then creates a new per-OEM handler hook, which should know how to handle events with the OEM[012] Data Available flags set. It then uses this to implement a workaround for IPMI 1.5-capable Dell PowerEdge servers which are susceptable to setting the OEM[012] Data Available flags when the driver can't handle it. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: watchdog/NMI interaction fixesCorey Minyard
There are some interactions between IPMI NMI timeouts and the other operations of the IPMI driver. This make sure those interactions are handled properly. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: high-res timer support fixesCorey Minyard
Fix some problems with the high-res timer support. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] ipmi: add per-channel IPMB addressesCorey Minyard
IPMI allows multiple IPMB channels on a single interface, and each channel might have a different IPMB address. However, the driver has only one IPMB address that it uses for everything. This patch adds new IOCTLS and a new internal interface for setting per-channel IPMB addresses and LUNs. New systems are coming out with support for multiple IPMB channels, and they are broken without this patch. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] IPMI: use dmi_find_device()Andrey Panin
This patch replaces homebrew DMI scanning code in IPMI System Interface driver with dmi_find_device() call. Signed-off-by: Andrey Panin <pazke@donpac.ru> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-31[ACPI] check acpi_disabled in IPMIYann Droneaud
Signed-off-by: Yann Droneaud <ydroneaud@mandriva.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[ACPI] delete CONFIG_ACPI_INTERPRETERLen Brown
it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-27[PATCH] clean up inline static vs static inlineJesper Juhl
`gcc -W' likes to complain if the static keyword is not at the beginning of the declaration. This patch fixes all remaining occurrences of "inline static" up with "static inline" in the entire kernel tree (140 occurrences in 47 files). While making this change I came across a few lines with trailing whitespace that I also fixed up, I have also added or removed a blank line or two here and there, but there are no functional changes in the patch. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] consolidate CONFIG_WATCHDOG_NOWAYOUT handlingAndrey Panin
Attached patch removes #ifdef CONFIG_WATCHDOG_NOWAYOUT mess duplicated in almost every watchdog driver and replaces it with common define in linux/watchdog.h. Signed-off-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28[PATCH] coverity: ipmi_msghandler() channels array overrun fixKAMBAROV, ZAUR
We fix the check in 1084, which was 1084 if (addr->channel > IPMI_NUM_CHANNELS) { 1085 spin_lock_irqsave(&intf->counter_lock, flags); 1086 intf->sent_invalid_commands++; 1087 spin_unlock_irqrestore(&intf->counter_lock, flags); 1088 rv = -EINVAL; 1089 goto out_err; 1090 } addr->channel is used in 1092 if (intf->channels[addr->channel].medium Definitions involved: 221 struct ipmi_channel channels[IPMI_MAX_CHANNELS]; 134 #define IPMI_MAX_CHANNELS 8 In /linux-2.6.12-rc6/include/linux/ipmi.h 148 #define IPMI_NUM_CHANNELS 0x10 Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: add 32-bit ioctl translations for 64-bit platformsAndrew Morton
) From: Corey Minyard <minyard@acm.org> This contains the patch for supporting 32-bit compatible ioctls on x86_64 systems. The current x86_64 driver will not work with 32-bit applications. Signed-off-by: Jordan Hargave <jordan_hargrave@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: use completions, not semaphores, in powerdown codeCorey Minyard
Don't use semaphores for IPC in the poweroff code, use completions instead. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: add power cycle capabilityCorey Minyard
This patch to adds "power cycle" functionality to the IPMI power off module ipmi_poweroff. It also contains changes to support procfs control of the feature. The power cycle action is considered an optional chassis control in the IPMI specification. However, it is definitely useful when the hardware supports it. A power cycle is usually required in order to reset a firmware in a bad state. This action is critical to allow remote management of servers. The implementation adds power cycle as optional to the ipmi_poweroff module. It can be modified dynamically through the proc entry mentioned above. During a power down and enabled, the power cycle command is sent to the BMC firmware. If it fails either due to non-support or some error, it will retry to send the command as power off. Signed-off-by: Christopher A. Poblete <Chris_Poblete@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: timer shutdown cleanupCorey Minyard
Clean up the timer shutdown handling in the IPMI driver. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] coverity: ipmi: avoid overrun of ipmi_interfaces[]Zaur Kambarov
Fix overrun of static array "ipmi_interfaces" of size 4 at position 4 with index variable "if_num". Definitions involved: 297 #define MAX_IPMI_INTERFACES 4 298 static ipmi_smi_t ipmi_interfaces[MAX_IPMI_INTERFACES]; Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>