aboutsummaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2006-06-29Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] i386: export memory more than 4G through /proc/iomem [PATCH] 64bit Resource: finally enable 64bit resource sizes [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed [PATCH] 64bit resource: change pnp core to use resource_size_t [PATCH] 64bit resource: change pci core and arch code to use resource_size_t [PATCH] 64bit resource: change resource core to use resource_size_t [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource [PATCH] 64bit resource: fix up printks for resources in misc drivers [PATCH] 64bit resource: fix up printks for resources in arch and core code [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers [PATCH] 64bit resource: fix up printks for resources in video drivers [PATCH] 64bit resource: fix up printks for resources in ide drivers [PATCH] 64bit resource: fix up printks for resources in mtd drivers [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers [PATCH] 64bit resource: fix up printks for resources in networks drivers [PATCH] 64bit resource: fix up printks for resources in sound drivers [PATCH] 64bit resource: C99 changes for struct resource declarations Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that was changed by the 64-bit resources had been deleted in the meantime ;)
2006-06-29[PATCH] genirq: rename desc->handler to desc->chipIngo Molnar
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29[PATCH] GPIO for SCx200 & PC-8736x: x86-onlyDave Jones
AFAICT, this is x86 only, so the patch below is needed to stop this new option showing up on PPC, IA64, etc.. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Documentation/watchdog update [WATCHDOG] convert AT91RM9200 watchdog to platform driver [WATCHDOG] add WDIOC_GETTIMELEFT ioctl [WATCHDOG] Pre-Timeout flags
2006-06-28[PATCH] IPMI: watchdog handle panic properlyCorey Minyard
Modify the watchdog timeout in IPMI to only do things at panic/reboot time if the watchdog timer was already running. Some BIOSes do not disable the watchdog timer at startup, and this led to a reboot a while later if the new OS running didn't start monitoring the watchdog, even if the watchdog was not running before. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] IPMI: remove high res timer codeCorey Minyard
There was some old high-res-timer code in the IPMI driver that is dead. Remove it. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] IPMI: tidy msghandler timerCorey Minyard
Tidy up the timer usage in the IPMI driver. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] istallion: cleanupsAlan Cox
Turned out to be rather a monster Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] stallion: fix recent SMP locking cleanupAlan Cox
Works better on SMP if... Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] remove active field from tty buffer structurePaul Fulghum
Remove 'active' field from tty buffer structure. This was added in 2.6.16 as part of a patch to make the new tty buffering SMP safe. This field is unnecessary with the more intelligently written flush_to_ldisc that adds receive_room handling. Removing this field reverts to simpler logic where the tail buffer is always the 'active' buffer, which should not be freed by flush_to_ldisc. (active == buffer being filled with new data) The result is simpler, smaller, and faster tty buffer code. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] add receive_room flow control to flush_to_ldiscPaul Fulghum
Flush data serially to line discipline in blocks no larger than tty->receive_room to avoid losing data if line discipline is busy (such as N_TTY operating at high speed on heavily loaded system) or does not accept data in large blocks (such as N_MOUSE). Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] remove TTY_DONT_FLIPPaul Fulghum
Remove TTY_DONT_FLIP tty flag. This flag was introduced in 2.1.X kernels to prevent the N_TTY line discipline functions read_chan() and n_tty_receive_buf() from running at the same time. 2.2.15 introduced tty->read_lock to protect access to the N_TTY read buffer, which is the only state requiring protection between these two functions. The current TTY_DONT_FLIP implementation is broken for SMP, and is not universally honored by drivers that send data directly to the line discipline receive_buf function. Because TTY_DONT_FLIP is not necessary, is broken in implementation, and is not universally honored, it is removed. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] drivers/char/ipmi/ipmi_msghandler.c: make proc_ipmi_root staticAdrian Bunk
Make struct proc_ipmi_root static. Besides this, tremove removes an unused #ifdef CONFIG_PROC_FS from include/linux/ipmi.h. Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] Remove redundant NULL checks before [kv]free - in drivers/Jesper Juhl
Remove redundant NULL chck before kfree + tiny CodingStyle cleanup for drivers/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add proper Kconfig, Makefile ↵Jim Cromie
entries Replace the temp makefile hacks with proper CONFIG entries, which are also added to Kconfig. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in ↵Jim Cromie
gpio_dump Add current pin settings to gpio_dump() output. This adds the last 'word' to the syslog lines, which displays the input and output values that the pin is set to. pc8736x_gpio.0: io00: 0x0044 TS OD PUE EDGE LO DEBOUNCE io:1/1 The 2 values may differ for a number of reasons: 1- the pin output circuitry is diaabled, (as the above 'TS' indicates) 2- it needs a pullup resistor to drive the attached circuit, 3- the external circuit needs a pullup so the open-drain has something to pull-down 4- the pin is wired to Vcc or Ground It might be appropriate to add a WARN for 2,3,4, since they could damage the chip and/or circuit, esp if misconfig goes unnoticed. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] gpio-patchset-fixups: include linux/io.hJim Cromie
Hmm. Im somewhat ambivalent about this patch, since with it, driver wont build for vanilla 17 or older. Its also only 1/2 of your suggestion - when I tried it, I was building against vanilla 17, and asm/uaccess.h cause compilation failure. Looking back, Im perplexed as to why linux/io.h didnt cause same failure ?!? use linux/io.h rather than asm/io.h Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: replace spinlocks w mutexesJim Cromie
Replace spinlocks guarding gpio config ops with mutexes. This is a me-too patch, and is justifiable insofar as mutexes have stricter semantics and better debugging support, so are preferred where they are applicable. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: fix gpio_current, use shadow regsJim Cromie
Add a working gpio_current() to pc8736x_gpio.c (the previous implementation just threw a dev_warn), and fix gpio_change() to use gpio_current() rather than the incorrect (and temporary) gpio_get(). Initialize shadow-regs so this all works. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common moduleJim Cromie
Use of dev_dbg() and friends is considered good practice. dev_dbg() needs a struct device *devp, but nsc_gpio is only a helper module, so it doesnt have/need its own. To provide devp to the user-modules (scx200 & pc8736x _gpio), we add it to the vtable, and set it during init. Also squeeze nsc_gpio_dump()'s format a little. [ 199.259879] pc8736x_gpio.0: io09: 0x0044 TS OD PUE EDGE LO DEBOUNCE Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w ↵Jim Cromie
dev_dbg Adds platform-device to (just introduced) driver, and uses it to replace many printks with dev_dbg() etc. This could trivially be merged into previous patch, but this way matches better with the corresponding patch that does the same change to scx200_gpio. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add new pc8736x_gpio moduleJim Cromie
Add the brand new pc8736x_gpio driver. This is mostly based upon scx200_gpio.c, but the platform_dev is treated separately, since its fairly big too. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: migrate gpio_dump to common moduleJim Cromie
Since the meaning of config-bits is the same for scx200 and pc8736x _gpios, we can share a function to deliver this to user. Since it is called via the vtable, its also completely replaceable. For now, we keep using printk... Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: migrate file-ops to common moduleJim Cromie
Now that the read(), write() file-ops are dispatching gpio-ops via the vtable, they are generic, and can be moved 'verbatim' to the nsc_gpio common-support module. After the move, various symbols are renamed to update 'scx200_' to 'nsc_', and headers are adjusted accordingly. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add empty common-moduleJim Cromie
Add the nsc_gpio common-support module as an empty shell. Next patch starts the migration of the common gpio support routines. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: dispatch via vtableJim Cromie
Now actually call the gpio operations thru the vtable. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add gpio-ops vtableJim Cromie
Abstract the gpio operations into a new nsc_gpio_ops vtable. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add 'v' command to device-fileJim Cromie
Add a new driver command: 'v' which calls gpio_dump() on the pin. The output goes to the log, like all other INFO messages in the original driver. Giving the user control over the feedback they 'need' is construed to be a user-friendly feature, and allows us (later) to dial down many INFO messages to DEBUG log-level. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add platforn_device for use w ↵Jim Cromie
dev_dbg Add a platform-device to scx200_gpio, and use its struct device dev member (ie: devp) in dev_dbg() once. There are 2 alternatives here (Im soliciting guidance/commentary): - use isa_device, if/when its added to the kernel. - alter scx200.c to EXPORT_GPL its private devp so that both scx200_gpio, and the (to be added) nsc_gpio module can use it. Since the available devp is in 'grandparent', this seems like too much 'action at a distance'. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: modernize driver init to 2.6 apiJim Cromie
Adopt many modern 2.6 coding practices, ala LDD3, chapter 3. Changes are limited to initialization calls from module init, ie: cdev_init, cdev_add, *_chrdev_region, mkdev. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: whitespace pre-cleanJim Cromie
GPIO SUPPORT FOR SCx200 & PC8736x The patch-set reworks the 2.4 vintage scx200_gpio driver for modern 2.6, and refactors GPIO support to reuse it in a new driver for the GPIO on PC-8736x chips. Its handy for the Soekris.com net-4801, which has both chips. These patches have been seen recently on Kernel-Mentors, and then Kernel-Newbies ML, where Jesper Juhl kindly reviewed it. His feedback has been incorporated. Thanks Jesper ! Its also gone to soekris-tech@soekris.com for possible testing by linux folks, I've gotten 1 promise so far. Theyre mostly BSD folk over there, but we'll see.. Device-file & Sysfs The driver preserves the existing device-file interface, including the write/cmd set, but adds v to 'view' the pin-settings & configs by inducing, via gpio_dump(), a dev_info() call. Its a fairly crappy way to get status, but it sticks to the syslog approach, conservatively. Allowing users to voluntarily trigger logging is good, it gives them a familiar way to confirm their app's control & use of the pins, and I've thus reduced the pin-mode-updates from dev_info to dev_dbg. I've recently bolted on a proto sysfs interface for both new drivers. Im not including those patches here; they (the patch + doc-pre-patch) are still quite raw (and unreviewed on KNML), and since they 'invent' a convention for GPIO, a proper vetting is needed. Since this patchset is much bigger than my previous ones, Id like to keep things simpler, and address it 1st, before bolting on more stuff. The driver-split The Geode CPU and the PC-87366 Super-IO chip have GPIO units which share a common pin-architecture (same pin features, with same bits controlling), but with different addressing mechanics and port organizations. The vintage driver expresses the pin capabilities with pin-mode commands [OoPpTt],etc that change the pin configurations, and since the 2 chips share pin-arch, we can reuse the read(), write() commands, once the implementation is suitably adjusted. The patchset adds a vtable: struct nsc_gpio_ops, to abstract the existing gpio operations, then adjusts fileops.write() code to invoke operations via that vtable. Driver specific open()s set private_data to the vtable so its available for use by write(). The vtable gets the gpio_dump() too, since its user-friendly, and (could be construed as) part of the current device-file interface. To support use of dev_dbg() in write() & _dump(), the vtable gets a dev ptr too, set by both scx200 & pc8736x _gpio drivers. heres how the pins are presented in syslog: [ 1890.176223] scx200_gpio.0: io00: 0x0044 TS OD PUE EDGE LO DEBOUNCE [ 1890.287223] scx200_gpio.0: io01: 0x0003 OE PP PUD EDGE LO nsc_gpio.c: new file is new home of several file-ops methods, which are modified to get their vtable from filp->private_data, and use it where needed. scx200_gpio.c: keeps some of its existing gpio routines, but now wires them up via the vtable (they're invoked by nsc_gpio.c:nsc_gpio_write() thru this vtable). A driver-spcific open() initializes filp->private_data with the vtable. Once the split is clean, and the scx200_gpio driver is working, we copy and modify the function and variable names, and rework the access-method bodies for the different addressing scheme. Heres a working overview of the patchset: # series file for GPIO # Spring Cleaning gpio-scx/patch.preclean # scripts/Lindent fixes, editor-ctrl comments # API Modernization gpio-scx/patch.api26 # what I learned from LDD3 gpio-scx/patch.platform-dev-2 # get pdev, support for dev_dbg() gpio-scx/patch.unsigned-minor # fix to match std practice # Debuggability gpio-scx/patch.dump-diet # shrink gpio_dump() gpio-scx/patch.viewpins # add new 'command' to call dump() gpio-scx/patch.init-refactor # pull shadow-register init to sub # Access-Abstraction (add vtable) gpio-scx/patch.access-vtable # introduce nsg_gpio_ops vtable, w dump gpio-scx/patch.vtable-calls # add & use the vtable in scx200_gpio gpio-scx/patch.nscgpio-shell # add empty driver for common-fops # move code under abstraction gpio-scx/patch.migrate-fops # move file-ops methods from scx200_gpio gpio-scx/patch.common-dump # mv scx200.c:scx200_gpio_dump() to nsc_gpio.c gpio-scx/patch.add-pc8736x-gpio # add new driver, like old, w chip adapt # gpio-scx/patch.add-DEBUG # enable all dev_dbg()s # Cleanups # finish printk -> dev_dbg() etc gpio-scx/patch.pdev-pc8736x # new drvr needs pdev too, gpio-scx/patch.devdbg-nscgpio # add device to 'vtable', use in dev_dbg() # gpio-scx/patch.pin-config-view # another 'c' 'command' # gpio-scx/quiet-getset # take out excess dbg stuff (pretty quiet now) gpio-scx/patch.shadow-current # imitate scx200_gpio's shadow regs in pc87* # post KMentors-post patches .. gpio-scx/patch.mutexes # use mutexes for config-locks gpio-scx/patch.viewpins-values # extend dump to obsolete separate 'c' cmd gpio-scx/patch.kconfig # add stuff for kbuild # TBC # combine api26 with pdev, which is just one step. # merge c&v commands to single do-all-fn # delay viewpins, dump-diet should also un-ifdef it too. diff.sys-gpio-rollup-1 This patch: Removed editor format-control comments, and used scripts/Lindent to clean up whitespace, then deleted the bogus chunks :-( Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] stallion clean upAlan Cox
There are two locking sets involved. One locks the board mappings and the other is the tty open/close locking. The low level code was clearly designed to be ported to OS's with spin locks already so pretty much comes out in the wash Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] IPMI: use schedule in kthreadakpm@osdl.org
Corey Minyard <minyard@acm.org> The kthread used to speed up polling for IPMI was using udelay in its busy-wait polling loop when the lower-level state machine told it to do a short delay. This just used CPU and didn't help scheduling, thus causing bad problems with other tasks. Call schedule() instead. Signed-off-by: Corey Minyard <minyard@acm.org> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] tty: fix TCSBRK commentPaul Fulghum
Fix TCSBRK comment to prevent confusion or accidental removal. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] spin/rwlock init cleanupsIngo Molnar
locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] 64bit resource: fix up printks for resources in misc driversGreg Kroah-Hartman
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] type-oh bug in tlclk.cmark gross
Mark Bellon found a bug in my tlclk driver. Thanks! I botch the register mask for store_received_ref_clk3a. See http://download.intel.com/design/network/manuals/30412001.pdf tables 124 and 136 for details. Signed-off-by: Mark Gross <mark.gross@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
2006-06-26Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: Input: iforce - remove some pointless casts Input: psmouse - add support for Intellimouse 4.0 Input: atkbd - fix HANGEUL/HANJA keys Input: fix misspelling of Hangeul key Input: via-pmu - add input device support Input: rearrange exports Input: fix formatting to better follow CodingStyle Input: reset name, phys and uniq when unregistering Input: return correct size when reading modalias attribute Input: change my e-mail address in MAINTAINERS file Input: fix potential overflows in driver/input/keyboard Input: fix potential overflows in driver/input/touchscreen Input: fix potential overflows in driver/input/joystick Input: fix potential overflows in driver/input/mouse Input: fix accuracy of fixp-arith.h Input: iforce - use ENOSPC instead of ENOMEM Input: constify drivers/char/keyboard.c
2006-06-26Merge branch 'x86-64'Linus Torvalds
* x86-64: (83 commits) [PATCH] x86_64: x86_64 stack usage debugging [PATCH] x86_64: (resend) x86_64 stack overflow debugging [PATCH] x86_64: msi_apic.c build fix [PATCH] x86_64: i386/x86-64 Add nmi watchdog support for new Intel CPUs [PATCH] x86_64: Avoid broadcasting NMI IPIs [PATCH] x86_64: fix apic error on bootup [PATCH] x86_64: enlarge window for stack growth [PATCH] x86_64: Minor string functions optimizations [PATCH] x86_64: Move export symbols to their C functions [PATCH] x86_64: Standardize i386/x86_64 handling of NMI_VECTOR [PATCH] x86_64: Fix modular pc speaker [PATCH] x86_64: remove sys32_ni_syscall() [PATCH] x86_64: Do not use -ffunction-sections for modules [PATCH] x86_64: Add cpu_relax to apic_wait_icr_idle [PATCH] x86_64: adjust kstack_depth_to_print default [PATCH] i386/x86-64: adjust /proc/interrupts column headings [PATCH] x86_64: Fix race in cpu_local_* on preemptible kernels [PATCH] x86_64: Fix fast check in safe_smp_processor_id [PATCH] x86_64: x86_64 setup.c - printing cmp related boottime information [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status ... Manual resolve of trivial conflict in arch/i386/kernel/Makefile
2006-06-26[PATCH] x86_64: Rename IOMMU option, fix help and mark option embedded.Andi Kleen
- Rename the GART_IOMMU option to IOMMU to make clear it's not just for AMD - Rewrite the help text to better emphatise this fact - Make it an embedded option because too many people get it wrong. To my astonishment I discovered the aacraid driver tests this symbol directly. This looks quite broken to me - it's an internal implementation detail of the PCI DMA API. Can the maintainer please clarify what this test was intended to do? Cc: linux-scsi@vger.kernel.org Cc: alan@redhat.com Cc: markh@osdl.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] x86_64: Clean and enhance up K8 northbridge access codeAndi Kleen
- Factor out the duplicated access/cache code into a single file * Shared between i386/x86-64. - Share flush code between AGP and IOMMU * Fix a bug: AGP didn't wait for end of flush before - Drop 8 northbridges limit and allocate dynamically - Add lock to serialize AGP and IOMMU GART flushes - Add PCI ID for next AMD northbridge - Random related cleanups The old K8 NUMA discovery code is unchanged. New systems should all use SRAT for this. Cc: "Navin Boppuri" <navin.boppuri@newisys.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] VT binding: Make VT binding a Kconfig optionAntonino A. Daplas
To enable this feature, CONFIG_VT_HW_CONSOLE_BINDING must be set to 'y'. This feature will default to 'n' to minimize users accidentally corrupting their virtual terminals. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] VT binding: Add sysfs control to the VT layerAntonino A. Daplas
Add sysfs control to the VT layer. A new sysfs class, 'vtconsole', and class devices 'vtcon[n]' are added. Each class device file has the following attributes: /sys/class/vtconsole/vtcon[n]/name - read-only attribute showing the name of the current backend /sys/class/vtconsole/vtcon[n]/bind - read/write attribute where: 0 - backend is unbound/unbind backend from the VT layer 1 - backend is bound/bind backend to the VT layer In addition, if any of the consoles are in KD_GRAPHICS mode, binding and unbinding will not succeed. KD_GRAPHICS mode usually indicates that the underlying console hardware is used for other purposes other than displaying text (ie X). This feature should prevent binding/unbinding from interfering with a graphics application using the VT. [akpm@osdl.org: warning fixes] Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] VT binding: Add binding/unbinding support for the VT consoleAntonino A. Daplas
The framebuffer console is now able to dynamically bind and unbind from the VT console layer. Due to the way the VT console layer works, the drivers themselves decide when to bind or unbind. However, it was decided that binding must be controlled, not by the drivers themselves, but by the VT console layer. With this, dynamic binding is possible for all VT console drivers, not just fbcon. Thus, the VT console layer will impose the following to all VT console drivers: - all registered VT console drivers will be entered in a private list - drivers can register themselves to the VT console layer, but they cannot decide when to bind or unbind. (Exception: To maintain backwards compatibility, take_over_console() will automatically bind the driver after registration.) - drivers can remove themselves from the list by unregistering from the VT console layer. A prerequisite for unregistration is that the driver must not be bound. The following functions are new in the vt.c: register_con_driver() - public function, this function adds the VT console driver to an internal list maintained by the VT console bind_con_driver() - private function, it binds the driver to the console take_over_console() is changed to call register_con_driver() followed by a bind_con_driver(). This is the only time drivers can decide when to bind to the VT layer. This is to maintain backwards compatibility. unbind_con_driver() - private function, it unbinds the driver from its console. The vacated consoles will be taken over by the default boot console driver. unregister_con_driver() - public function, removes the driver from the internal list maintained by the VT console. It will only succeed if the driver is currently unbound. con_is_bound() checks if the driver is currently bound or not give_up_console() is just a wrapper to unregister_con_driver(). There are also 3 additional functions meant to be called only by the tty layer for sysfs control: vt_bind() - calls bind_con_driver() vt_unbind() - calls unbind_con_driver() vt_show_drivers() - shows the list of registered drivers Most VT console drivers will continue to work as is, but might have problems when unbinding or binding which should be fixable with minimal changes. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Detaching fbcon: fix give_up_console()Antonino A. Daplas
To allow for detaching fbcon, it must be able to give up the console. However, the function give_up_console() is plain broken. It just sets the entries in the console driver map to NULL, it leaves the vt layer without a console driver, and does not decrement the module reference count. Calling give_up_console() is guaranteed to hang the machine.. To fix this problem, ensure that the virtual consoles are not left dangling without a driver. All systems have a default boot driver (either vgacon or dummycon) which is never unloaded. For those vt's that lost their driver, the default boot driver is reassigned back to them. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] vt: Delay the update of the visible consoleDavid Hollister
Delay the update of the visible framebuffer console until all other consoles have been initialized in order to avoid losing information. This only seems to be a problem with modules, not with built-in drivers. Signed-off-by: David Hollister <david.hollister@amd.com> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] hangcheck: remove monotomic_clock on x86Andrew Morton
John's about to nuke x86's monotonic clock without grepping for it first. The patch lamely borrows the ppc64 code for x86. hangcheck-timer shouldn't be doing it this way a) HAVE_MONOTONIC should be CONFIG_MONOTONIC_CLOCK and it should be defined in arch/xxx/Kconfig. b) That ifdef tangle shouldn't be in hangcheck-timer.c. It should be using arch-provided helper functions, which CONFIG_MONOTONIC_CLOCK-enabling architectures implement in arch/something.c Cc: john stultz <johnstul@us.ibm.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Add TI OMAP CPU family HW RNG driverMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Add ixp4xx HW RNG driverMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>