aboutsummaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)Author
2008-02-06[CPUFREQ] fix configuration help messageStefano Brivio
cpufreq support can't be built as a module. Fix the related configuration help message. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06[CPUFREQ] Eliminate cpufreq_userspace scaling_setspeed deadlockVenki Pallipadi
Eliminate cpufreq_userspace scaling_setspeed deadlock. Luming Yu recently uncovered yet another cpufreq related deadlock. One thread that continuously switches the governors and the other thread that repeatedly cats the contents of cpufreq directory causes both these threads to go into a deadlock. Detailed examination of the deadlock showed the exact flow before the deadlock as: Thread 1 Thread 2 ________ ________ cats files under /sys/devices/.../cpufreq/ Set governor to userspace Adds a new sysfs entry for scaling_setspeed cats files under /sys/devices/.../cpufreq/ Set governor to performance Holds cpufreq_rw_sem in write mode Sends a STOP notify to userspace governor cat /sys/devices/.../cpufreq/scaling_setspeed Gets a handle on the above sysfs entry with sysfs_get_active Blocks while trying to get cpufreq_rw_sem in read mode Remove a sysfs entry for scaling_setspeed Blocks on sysfs_deactivate while waiting for earlier get_active (on other thread) to drain At this point both threads go into deadlock and any other thread that tries to do anything with sysfs cpufreq will also block. There seems to be no easy way to avoid this deadlock as long as cpufreq_userspace adds/removes the sysfs entry under same kobject as cpufreq. Below patch moves scaling_setspeed to cpufreq.c, keeping it always and calling back the governor on read/write. This is the cleanest fix I could think of, even though adding two callbacks in governor structure just for this seems unnecessary. Note that the change makes scaling_setspeed under /sys/.../cpufreq permanent and returns <unsupported> when governor is not userspace. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06[CPUFREQ] fix incorrect comment on show_available_freqs() in freq_table.cFenghua Yu
In freq_table.c, show_available_freqs()'s comment is oberviously wrong. Change the comment to a new one to avoid confusion. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06[CPUFREQ] drivers/cpufreq: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-01-30cpufreq: fix obvious condition statement errorYi Yang
The function __cpufreq_set_policy in file drivers/cpufreq/cpufreq.c has a very obvious error: if (policy->min > data->min && policy->min > policy->max) { ret = -EINVAL; goto error_out; } This condtion statement is wrong because it returns -EINVAL only if policy->min is greater than policy->max (in this case, "policy->min > data->min" is true for ever.). In fact, it should return -EINVAL as well if policy->max is less than data->min. The correct condition should be: if (policy->min > data->max || policy->max < data->min) { The following test result testifies the above conclusion: Before applying this patch: [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 2394000 1596000 [root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@yangyi-dev /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq -bash: echo: write error: Invalid argument [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@yangyi-dev /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# After applying this patch: [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 2394000 1596000 [root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@localhost /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq -bash: echo: write error: Invalid argument [root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 1596000 [root@localhost /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq -bash: echo: write error: Invalid argument [root@localhost /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq -bash: echo: write error: Invalid argument [root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1596000 [root@localhost /]# echo "1596000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@localhost /]# echo "2394000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq [root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 2394000 [root@localhost /] Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-24Kobject: convert drivers/* from kobject_unregister() to kobject_put()Greg Kroah-Hartman
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: change drivers/cpufreq/cpufreq.c to use kobject_init_and_addGreg Kroah-Hartman
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Dominik Brodowski <linux@brodo.de> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Shin <jacob.shin@amd.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-17cpufreq: Initialise default governor before useJohannes Weiner
When the cpufreq driver starts up at boot time, it calls into the default governor which might not be initialised yet. This hurts when the governor's worker function relies on memory that is not yet set up by its init function. This migrates all governors from module_init() to fs_initcall() when being the default, as was already done in cpufreq_performance when it was the only possible choice. The performance governor is always initialized early because it might be used as fallback even when not being the default. Fixes at least one actual oops where ondemand is the default governor and cpufreq_governor_dbs() uses the uninitialised kondemand_wq work-queue during boot-time. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17drivers/cpufreq/cpufreq_stats.c section fixAdrian Bunk
cpufreq_stats_free_table() mustn't be __cpuexit since it's called by the __cpuinit cpufreq_stat_cpu_callback(). This patch fixes the following section mismatch reported by Chris Clayton: WARNING: vmlinux.o(.init.text+0x143dd): Section mismatch: reference to .exit.text:cpufreq_stats_free_table (between 'cpufreq_stat_cpu_callback' and 'cpufreq_stats_init') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Chris Clayton <chris2553@googlemail.com> Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17cpufreq: fix missing unlocks in cpufreq_add_dev error paths.Dave Jones
Ingo hit some BUG_ONs that were probably caused by these missing unlocks causing an unbalance. He couldn't reproduce the bug reliably, so it's unknown that it's definitly fixing the problem he hit, but it's a fairly good chance, and this fixes an obvious bug. [ Dave: "Ingo followed up that he hit some lockdep related output with this applied, so it may not be right. I'll look at it after xmas if no-one has it figured out before then." Akpm: "It looks pretty correct to me though." ] Signed-off-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22[CPUFREQ] Fix up whitespace in conservative governor.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-22[CPUFREQ] Make cpufreq_conservative handle out-of-sync events properlyElias Oltmanns
Make cpufreq_conservative handle out-of-sync events properly Currently, the cpufreq_conservative governor doesn't get notified when the actual frequency the cpu is running at differs from what cpufreq thought it was. As a result the cpu may stay at the maximum frequency after a s2ram / resume cycle even though the system is idle. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12kobjects: fix up improper use of the kobject name fieldGreg Kroah-Hartman
A number of different drivers incorrect access the kobject name field directly. This is not correct as the name might not be in the array. Use the proper accessor function instead.
2007-10-09[CPUFREQ] Don't take semaphore in cpufreq_quick_get()Andi Kleen
I don't see any reason to take an expensive lock in cpufreq_quick_get() Reading policy->cur is a single atomic operation and after the lock is dropped again the state could change any time anyways. So don't take the lock in the first place. This also makes this function interrupt safe which is useful for some code of mine. Signed-off-by: Andi Kleen <ak@suse.de> Cc: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04[CPUFREQ] cpufreq_stats: misc cpuinit section annotationsSatyam Sharma
* Stop referencing the callback directly from the __init and __exit functions of this driver, and instead explicitly call cpufreq_update_policy() et al. This enables the callback function to be marked as __cpuinit (and the notifier_block __cpuinitdata), thereby saving space when HOTPLUG_CPU=n. This also enables us to use other tricks to replace __cpuinit{data} in future. * cpufreq_stats_free_table() is only called from __cpuinit or __exit marked functions, making it an ideal candidate for __cpuexit. * Fix missing space in the module description Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04[CPUFREQ] mark hotplug notifier callback as __cpuinitSatyam Sharma
The notifier_block is already __cpuinitdata, thereby allowing us to safely mark the callback function as __cpuinit also, thereby saving space when HOTPLUG_CPU=n. Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04[CPUFREQ] Only check for transition latency on problematic governors ↵Thomas Renninger
(kconfig fix) Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04[CPUFREQ] allow ondemand and conservative cpufreq governors to be used as ↵Thomas Renninger
default Depending on the transition latency of the HW for cpufreq switches, the ondemand or conservative governor cannot be used with certain cpufreq drivers. Still the ondemand should be the default governor on a wide range of systems. This patch allows this and lets the governor fallback to the performance governor at cpufreq driver load time, if the driver does not support fast enough frequency switching. Main benefit is that on e.g. installation or other systems without userspace support a working dynamic cpufreq support can be achieved on most systems by simply loading the cpufreq driver. This is especially essential for recent x86(_64) laptop hardware which may rely on working dynamic cpufreq OS support. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04[CPUFREQ] move policy's governor initialisation out of low-level drivers ↵Thomas Renninger
into cpufreq core Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-13[CPUFREQ] Restore previously used governor on a hot-replugged CPUThomas Renninger
Negative side effect: needs NR_CPUs pointer array of memory in CONFIG_HOTPLUG_CPU case. Still needs userspace track keeping and rewriting of governors if governors change while a CPU is not active (always the governor at CPU remove time is restored). Move of policy->user_policy.governor assignment is just a minor cleanup. http://bugzilla.kernel.org/show_bug.cgi?id=8671 Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-13[CPUFREQ] bugfix cpufreq in combination with performance governorPeter Oruba
There is a frequency scaling issue that I encountered with the performance governor in combination with CPU hotplug. In cpufreq.c CPU frequency is reduced to its minimum before the CPU gets unregistered and set offline. Does that have a particular reason? Since the (k8-)governor does not monitor CPU frequency that setting also applies then to the remaining CPU as well and lets the system run on the lowest frequency although performance is chose as the policy. Signed-off-by: Peter Oruba <peter.oruba@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix sysfs_create_file return value handling [CPUFREQ] ondemand: fix tickless accounting and software coordination bug [CPUFREQ] ondemand: add a check to avoid negative load calculation [CPUFREQ] Keep userspace governor quiet when it is not being used [CPUFREQ] Longhaul - Proper register access [CPUFREQ] Kconfig powernow-k8 driver should depend on ACPI P-States driver [CPUFREQ] Longhaul - Replace ACPI functions with direct I/O [CPUFREQ] Longhaul - Remove duplicate multipliers [CPUFREQ] Longhaul - Embedded "conservative" [CPUFREQ] acpi-cpufreq: Proper ReadModifyWrite of PERF_CTL MSR [CPUFREQ] check return value of sysfs_create_file [CPUFREQ] Longhaul - Check ACPI "BM DMA in progress" bit [CPUFREQ] Longhaul - Move old_ratio to correct place [CPUFREQ] Longhaul - VT8237 support [CPUFREQ] Longhaul - Use all kinds of support [CPUFREQ] powernow-k8: clarify number of cores.
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-21[CPUFREQ] Fix sysfs_create_file return value handlingTobias Klauser
Commit 0a4b2ccc555fa2ca6873d60219047104e4805d45 in cpufreq.git eliminates the build warnings but does not pass on the error code of sysfs_create_file to the function calling cpufreq_add_dev. Instead some previous value of ret would be returned. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dave Jones <davej@redhat.com>
2007-06-21[CPUFREQ] ondemand: fix tickless accounting and software coordination bugVenki Pallipadi
With tickless kernel and software coordination os P-states, ondemand can look at wrong idle statistics. This can happen when ondemand sampling is happening on CPU 0 and due to software coordination sampling also looks at utilization of CPU 1. If CPU 1 is in tickless state at that moment, its idle statistics will not be uptodate and CPU 0 thinks CPU 1 is idle for less amount of time than it actually is. This can be resolved by looking at all the busy times of CPUs, which is accurate, even with tickless, and use that to determine idle time in a round about way (total time - busy time). Thanks to Arjan for originally reporting the ondemand bug on Lenovo T61. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2007-06-21[CPUFREQ] ondemand: add a check to avoid negative load calculationVenki Pallipadi
Due to rounding and inexact jiffy accounting, idle_ticks can sometimes be higher than total_ticks. Make sure those cases are handled as zero load case. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2007-06-21[CPUFREQ] Keep userspace governor quiet when it is not being usedVenki Pallipadi
Userspace governor registers a frequency change notifier at init time, even when no CPU is set to userspace governor. Make it register only when atleast one CPU is using userspace. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-29[CPUFREQ] check return value of sysfs_create_fileThomas Renninger
Eliminate build warning (sysfs_create_file return value must be checked) Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-09Add suspend-related notifications for CPU hotplugRafael J. Wysocki
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Add a new deferrable delayed work initVenki Pallipadi
Add a new deferrable delayed work init. This can be used to schedule work that are 'unimportant' when CPU is idle and can be called later, when CPU eventually comes out of idle. Use this init in cpufreq ondemand governor. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-26[CPUFREQ] cleanup kconfig optionsMike Frysinger
Adds proper lines to help output of kconfig so people can find the module names. Also fixed some broken leading spaces versus tabs. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-04-26[CPUFREQ] Remove deprecated /proc/acpi/processor/performance write supportThomas Renninger
Remove deprecated /proc/acpi/processor/performance write support Writing to /proc/acpi/processor/xy/performance interferes with sysfs cpufreq interface. Also removes buggy cpufreq_set_policy exported symbol. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
2007-04-26[CPUFREQ] Fix limited cpufreq when booted on batteryThomas Renninger
References: https://bugzilla.novell.com/show_bug.cgi?id=231107 https://bugzilla.novell.com/show_bug.cgi?id=264077 Fix limited cpufreq when booted on battery If booted on battery: cpufreq_set_policy (evil) is invoked which calls verify_within_limits. max_freq gets lowered and therefore users_policy.max, which is used to restore higher freqs via update_policy later is set to the already limited frequency -> you can never go up again, even BIOS allows higher freqs later. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
2007-03-27[PATCH] Fix maxcpus=1 trigerring BUG() in cpufreqVenki Pallipadi
Ingo reported it on lkml in the thread "2.6.21-rc5: maxcpus=1 crash in cpufreq: kernel BUG at drivers/cpufreq/cpufreq.c:82!" This check added to remove_dev is symmetric to one in add_dev and handles callbacks for offline cpus cleanly. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26Revert "[CPUFREQ] constify cpufreq_driver where possible."Linus Torvalds
This reverts commit aeeddc1435c37fa3fc844f31d39c185b08de4158, which was half-baked and broken. It just resulted in compile errors, since cpufreq_register_driver() still changes the 'driver_data' by setting bits in the flags field. So claiming it is 'const' _really_ doesn't work. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] constify some data tables. [CPUFREQ] constify cpufreq_driver where possible. {rd,wr}msr_on_cpu SMP=n optimization [CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAR rdmsr_on_cpu, wrmsr_on_cpu [CPUFREQ] Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI
2007-02-22[CPUFREQ] constify cpufreq_driver where possible.Dave Jones
Not all cases are possible due to ->flags being set at runtime on some drivers. Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-20[CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAROleg Nesterov
Looks like dbs_timer() is very careful wrt per_cpu(cpu_dbs_info), and it doesn't need the help of WORK_STRUCT_NOAUTOREL. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-By: David Howells <dhowells@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-16Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Longhaul - Redo Longhaul ver. 2 [CPUFREQ] EPS - Correct 2nd brand test [CPUFREQ] Longhaul - Separate frequency and voltage transition [CPUFREQ] Longhaul - Models of Nehemiah [CPUFREQ] Whitespace fixup [CPUFREQ] Longhaul - Simplier minmult [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback [CPUFREQ] ondemand governor restructure the work callback [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues [CPUFREQ] Remove hotplug cpu crap [CPUFREQ] Enhanced PowerSaver driver [CPUFREQ] Longhaul - Add VT8235 support [CPUFREQ] Longhaul - Fix guess_fsb function [CPUFREQ] Longhaul - Remove duplicate tables [CPUFREQ] Longhaul - Introduce Nehemiah C [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE [CPUFREQ] Longhaul - Remove "ignore_latency" option
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10[CPUFREQ] Whitespace fixupDave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-10[CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristateAdrian Bunk
CPU_FREQ_TABLE enables helper code and gets select'ed when it's required. Building it as a module when it's not required doesn't seem to make much sense. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-10[CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callbackVenkatesh Pallipadi
Eliminate flush_workqueue in cpufreq_governor(STOP) callpath. Using flush there has a deadlock potential as in http://uwsg.iu.edu/hypermail/linux/kernel/0611.3/1223.html Also, cleanup the locking issues with do_dbs_timer delayed_work callback. As it changes the CPU frequency using __cpufreq_target, it needs to have policy_rwsem in write mode, which also protects it from hot plug. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-10[CPUFREQ] ondemand governor restructure the work callbackVenkatesh Pallipadi
Restructure the delayed_work callback in ondemand. This eliminates the need for smp_processor_id in the callback function and also helps in proper locking and avoiding flush_workqueue when stopping the governor (done in subsequent patch). Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-10[CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issuesVenkatesh Pallipadi
Yet another attempt to resolve cpufreq and hotplug locking issues. Patchset has 3 patches: * Rewrite the lock infrastructure of cpufreq using a per cpu rwsem. * Minor restructuring of work callback in ondemand driver. * Use the new cpufreq rwsem infrastructure in ondemand work. This patch: Convert policy->lock to rwsem and move it to per_cpu area. This rwsem will protect against both changing/accessing policy related parameters and CPU hot plug/unplug. [malattia@linux.it: fix oops in kref_put()] Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-10[CPUFREQ] Remove hotplug cpu crapDave Jones
The hotplug CPU locking in cpufreq is horrendous. No-one seems to care enough to fix it, so just remove it so that the 99.9% of the real world users of this code can use cpufreq without being bothered by warnings. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-01-29[CPUFREQ] check sysfs_create_link return valueAhmed S. Darwish
Trivial patch to check sysfs_create_link return values. Fail gracefully if needed. Signed-off-by: Ahmed Darwish <darwish.07@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-22[CPUFREQ] Bug fix for acpi-cpufreq and cpufreq_stats oops on frequency ↵Venkatesh Pallipadi
change notification Fixes the oops in cpufreq_stats with acpi_cpufreq driver. The issue was that the frequency was reported as 0 in acpi-cpufreq.c. The bug is due to different indicies for freq_table and ACPI perf table. Also adds a check in cpufreq_stats to check for error return from freq_table_get_index() and avoid using the error return value. Patch fixes the issue reported at http://www.ussg.iu.edu/hypermail/linux/kernel/0611.2/0629.html and also other similar issue here http://bugme.osdl.org/show_bug.cgi?id=7383 comment 53 Signed-off-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-13[CPUFREQ] fixes typo in cpufreq.cDhaval Giani
This patch fixes a typo in cpufreq.c From: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>