aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2009-03-29drm: detect hdmi monitor by hdmi identifier (v3)Ma Ling
Sometime we need to communicate with HDMI monitor by sending audio or video info frame, so we have to know monitor type. However if user utilize HDMI-DVI adapter to connect DVI monitor, hardware detection will incorrectly show the monitor is HDMI. HDMI spec tell us that any device containing IEEE registration Identifier will be treated as HDMI device. The patch intends to detect HDMI monitor by this rule. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm: drm_fops.c unlock missing on error pathDan Carpenter
drm_open_helper() from drm_fops.c had a missing mutex_unlock in a error path. This was caught by smatch (http://repo.or.cz/w/smatch.git/). Compile tested. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm: read EDID extensions from monitorMa Ling
Usually drm read basic EDID, that is enough for us, but since igital display were introduced i.e. HDMI monitor, sometime we need to interact with monitor by EDID extension information, EDID extensions include audio/video data block, speaker allocation and vendor specific data blocks. This patch intends to read EDID extensions from digital monitor for users. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm: Use a little stash on the stack to avoid kmalloc in most DRM ioctls.Eric Anholt
The kmalloc was taking up about 1.5% of the CPU on an ioctl-heavy workload (x11perf -aa10text on 965). Initial results look like they have a corresponding improvement in performance for aa10text, but more numbers might not hurt. Thanks to ajax for pointing out this performance regression I'd introduced back in 2007. [airlied: well I introduced it sneakily inside Eric's patch] Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm/radeon: add regs required for occlusion queries supportMaciej Cencora
[airlied: cleaned up slightly for drm-next] Signed-off-by: Maciej Cencora <m.cencora@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-28drm/i915: check the return value from the copy from userDave Airlie
This produced a warning on my build, not sure why super-warning-man didn't notice this one, its much worse than the %z one. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-28drm: merge Linux master into HEADDave Airlie
Conflicts: drivers/gpu/drm/drm_info.c drivers/gpu/drm/drm_proc.c drivers/gpu/drm/i915/i915_gem_debugfs.c
2009-03-28Merge branch 'linus' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/sparc/kernel/time_64.c drivers/gpu/drm/drm_proc.c Manual merge to resolve build warning due to phys_addr_t type change on x86: drivers/gpu/drm/drm_info.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27i915: fix wrong 'size_t' format stringLinus Torvalds
For the fifteen bazillionth time. See also commits f06da264cfb0f9444d41ca247213e419f90aa72a and aeb565dfc3ac4c8b47c5049085b4c7bfb2c7d5d7 ("i915: Fix more size_t format string warnings" and "Fix annoying DRM_ERROR() string warning"). Grr-target: Eric Anholt <eric@anholt.net> Grr-target: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27drm/i915: Fix LVDS dither settingLi Peng
Update bdb_lvds_options structure according to its defination in 2D driver. Then we can parse and set 'lvds_dither' bit correctly on non-965 chips. Signed-off-by: Li Peng <peng.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Check for dev->primary->master before dereference.Chris Wilson
I've hit the occasional oops inside i915_wait_ring() with an indication of a NULL derefence of dev->primary->master. Adding a NULL check is consistent with the other potential users of dev->primary->master. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: TV detection fixZhenyu Wang
Check that the encoder has a real enabled crtc for TV detect, and fix missing TV type setting after detect. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: TV mode_set sync up with 2D driverZhenyu Wang
Fix TV control save register for untouched bits, and color knobs different definition for 945 and 965 chips. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Fix TV get_modes to return modes countZhenyu Wang
The get_modes hook must return the number of modes added. This also fixes TV mode's clock calculation int overflow issue, and use 0.01 precision for mode refresh validation. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Sync crt hotplug detection with intel video driverZhao Yakui
This covers: Use long crt hotplug activation time on GM45. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Sync mode_valid/mode_set with intel video driverZhao Yakui
This covers: Limit CRT DAC speed better. and also clears the border color in case it's set to some garbage, which would fix ugly outlines in the blank regions of the CRT. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> [anholt: replaced *drm_dev with *dev] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: TV modes' parameters sync up with 2D driverZhenyu Wang
This covers at least: TV: subcarrier fix for NTSC and PAL TV: fix timing parameters for PAL, 480p, 1080i Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27agp/intel: Add support for new intel chipset.Shaohua Li
This is a G33-like desktop and mobile chipset. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27i915/drm: Remove two redundant agp_chipset_flushesOwain G. Ainsworth
agp_chipset_flush() is for flushing the intel GMCH write cache via the IFP, these two uses are for when we're getting the object into the cpu READ domain, and thus should not be needed. This confused me when I was getting my head around the code. With thanks to airlied for helping me check my mental picture of how the flushes and clflushes are supposed to be used. Signed-off-by: Owain G. Ainsworth <oga@openbsd.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Display fence register state in debugfs i915_gem_fence_regs node.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Add information on pinning and fencing to the i915 list debug.Eric Anholt
This was inspired by a patch by Chris Wilson, though none of it applied in any way due to the debugfs work and I decided to change the formatting of the new information anyway. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Consolidate gem object list dumpingBen Gamari
Here we eliminate a few functions in favor of using a single function to dump from all of the object lists. Signed-Off-By: Ben Gamari <bgamari@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Convert i915 proc files to seq_file and move to debugfs.Ben Gamari
Signed-off-by: Ben Gamari <bgamari@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm: Convert proc files to seq_file and introduce debugfsBen Gamari
The old mechanism to formatting proc files is extremely ugly. The seq_file API was designed specifically for cases like this and greatly simplifies the process. Also, most of the files in /proc really don't belong there. This patch introduces the infrastructure for putting these into debugfs and exposes all of the proc files in debugfs as well. Signed-off-by: Ben Gamari <bgamari@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Fix lock order reversal in GEM relocation entry copying.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Keith Packard <keithp@keithp.com>
2009-03-27drm/i915: Fix lock order reversal with cliprects and cmdbuf in non-DRI2 paths.Eric Anholt
This introduces allocation in the batch submission path that wasn't there previously, but these are compatibility paths so we care about simplicity more than performance. kernel.org bug #12419. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Keith Packard <keithp@keithp.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Fix lock order reversal in shmem pread path.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Fix lock order reversal in shmem pwrite path.Eric Anholt
Like the GTT pwrite path fix, this uses an optimistic path and a fallback to get_user_pages. Note that this means we have to stop using vfs_write and roll it ourselves. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Make GEM object's page lists refcounted instead of get/free.Eric Anholt
We've wanted this for a few consumers that touch the pages directly (such as the following commit), which have been doing the refcounting outside of get/put pages. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Fix lock order reversal in GTT pwrite path.Eric Anholt
Since the pagefault path determines that the lock order we use has to be mmap_sem -> struct_mutex, we can't allow page faults to occur while the struct_mutex is held. To fix this in pwrite, we first try optimistically to see if we can copy from user without faulting. If it fails, fall back to using get_user_pages to pin the user's memory, and map those pages atomically when copying it to the GPU. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Read the right SDVO register when detecting SVDO/HDMI.Kristian Høgsberg
This fixes incorrect detection of the second SDVO/HDMI output on G4X, and extra boot time on pre-G4X. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Use a different PLL timing search function on G4X.Ma Ling
This improves the PLL timings according to the suggestion of the hardware engineers. This results in some outputs being able to sync that weren't able to before. This is part of fixing fd.o bug #17508. Signed-off-by: Ma Ling <ling.ma@intel.com> [anholt: cleaned up a couple of redundant comments] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Use documented PLL timing limits for G4X platformMa Ling
The values come from the internal reference spreadsheet on PLL timing limits for the G4X chipsets. Part of fixing fd.o bug #17508 Signed-off-by: Ma Ling <ling.ma@intel.com> [anholt: Cleaned up some whitespace] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Change DCC tiling detection case to cover only mobile parts.Eric Anholt
Later spec investigation has revealed that every 9xx mobile part has had this register in this format. Also, no non-mobile parts have been shown to have this register. So make all mobile use the same code, and all non-mobile use the hack 965 detection. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-26Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'bkl-removal' of git://git.lwn.net/linux-2.6: Rationalize fasync return values Move FASYNC bit handling to f_op->fasync() Use f_lock to protect f_flags Rename struct file->f_ep_lock
2009-03-24drm: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: airlied@linux.ie Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-18drm/radeon: fix logic in r600_page_table_init() to match ati_gartAlex Deucher
This fixes page table init on rs600. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-16Rationalize fasync return valuesJonathan Corbet
Most fasync implementations do something like: return fasync_helper(...); But fasync_helper() will return a positive value at times - a feature used in at least one place. Thus, a number of other drivers do: err = fasync_helper(...); if (err < 0) return err; return 0; In the interests of consistency and more concise code, it makes sense to map positive return values onto zero where ->fasync() is called. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-13drm/radeon: r600 ptes are 64-bit, cleanup cleanup function.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm/radeon: don't call irq changes on r600 suspend/resumeDave Airlie
Until we sort out r600 IRQs don't do this. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm/radeon: fix r600 writeback across suspend/resumeDave Airlie
This update was done in mainline radeon, but not in the r600. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm/radeon: fix r600 writeback setup.Dave Airlie
This fixes 2 bugs: 1. the AGP calculation wasn't consistent with the PCI(E) calc for the RPTR_ADDR registers. This consolidates the writes and fixes it up. 2. The scratch address was being incorrectly calculated, this breaks it out into a lot more linear steps. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm: fix warnings about new mappings in info code.Dave Airlie
This fixes up the warnings in the debugfs code that conflicted with the mapping fixups. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm/radeon: NULL noise: drivers/gpu/drm/radeon/radeon_*.cHannes Eder
Fix this sparse warning: drivers/gpu/drm/radeon/r600_cp.c:1811:52: warning: Using plain integer as NULL pointer drivers/gpu/drm/radeon/radeon_cp.c:1363:52: warning: Using plain integer as NULL pointer drivers/gpu/drm/radeon/radeon_state.c:1983:61: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm/radeon: fix r600 pci mapping calls.Dave Airlie
This realigns the r600 pci mapping calls with the ati pcigart ones, fixing the direction and using the correct interface. Suggested by Jerome Glisse. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm/radeon: r6xx/r7xx: fix possible oops in r600_page_table_cleanup()Alex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13radeon: call the correct idle function, logic got inverted.Dave Airlie
This calls the correct idle function for the R600 and previous chips. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13drm/radeon: RS600: fix interrupt handlingAlex Deucher
the checks weren't updated when RS600 support was added. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13drm/r600: fix rptr address along lines of previous fixes to radeon.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 23:47:48 +0000