aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2008-12-04drm/i915: Return error in i915_gem_set_to_gtt_domain if we're not in the GTT.Eric Anholt
It's only for flushing caches appropriately for GTT access, not for actually getting it there. Prevents potential smashing of cpu read/write domains on unbound objects. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Retry execbuffer pinning after clearing the GTTKeith Packard
If we fail to pin all of the buffers in an execbuffer request, go through and clear the GTT and try again to see if its just a matter of fragmentation Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Move the execbuffer domain computations togetherKeith Packard
This eliminates the dev_set_domain function and just in-lines it where its used, with the goal of moving the manipulation and use of invalidate_domains and flush_domains closer together. This also avoids calling add_request unless some domain has been flushed. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Rename object_set_domain to object_set_to_gpu_domainKeith Packard
Now that the CPU and GTT domain operations are isolated to their own functions, the previously general-purpose set_domain function is now used only to set GPU domains. It also has no failure cases, which is important as this eliminates any possible interruption of the computation of new object domains and subsequent emmission of the flushing instructions into the ring. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Make a single set-to-cpu-domain path and use it wherever needed.Eric Anholt
This fixes several domain management bugs, including potential lack of cache invalidation for pread, potential failure to wait for set_domain(CPU, 0), and more, along with producing more intelligible code. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Make a single set-to-gtt-domain path.Eric Anholt
This fixes failure to flush caches in the relocation update path, and failure to wait in the set_domain ioctl, each of which could lead to incorrect rendering. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: If interrupted while setting object domains, still emit the flush.Eric Anholt
Otherwise, we would leave the objects in an inconsistent state, such as write_domain == 0 but on the flushing list. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Move flushing list cleanup from flush request retire to request emit.Eric Anholt
obj_priv->write_domain is "write domain if the GPU went idle now", not "write domain at this moment." By postponing the clear, we confused the concept, required more storage, and potentially emitted more flushes than are required. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Respect GM965/GM45 bit-17-instead-of-bit-11 option for swizzling.Eric Anholt
This fixes readpixels and buffer corruption when swapped out and in by disabling tiling on them. Now that we know that the bit 17 mode isn't just a mistake of older chipsets, we'll need to work on a clever fix so that we can get the performance of tiling on these chipsets, but that will require intrusive changes targeted at the next kernel release, not this one. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-01drivers/gpu/drm/i915/i915_irq.c: fix warningAndrew Morton
drivers/gpu/drm/i915/i915_irq.c: In function 'i915_disable_pipestat': drivers/gpu/drm/i915/i915_irq.c:101: warning: control may reach end of non-void function 'i915_pipestat' being inlined Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-01drm/i915: Fix copy'n'pasteo that broke VT switch if flushing was non-empty.Eric Anholt
Introduced in the "Avoid BUG_ONs on VT switch" commit. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-26drm/i915: Save/restore HWS_PGA on suspend/resumePeng Li
It fixes suspend/resume failure of xf86-video-intel dri2 branch. As dri2 branch doesn't call I830DRIResume() to restore hardware status page anymore, we need to preserve this register across suspend/resume. Signed-off-by: Peng Li <peng.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25drm: move drm vblank initialization/cleanup to driver load/unloadKeith Packard
drm vblank initialization keeps track of the changes in driver-supplied frame counts across vt switch and mode setting, but only if you let it by not tearing down the drm vblank structure. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25drm/i915: execbuffer pins objects, no need to ensure they're still in the GTTKeith Packard
Before we had the notion of pinning objects, we had a kludge around to make sure all of the objects were still resident in the GTT before we committed to executing a batch buffer. We don't need this any longer, and it sticks an error return in the middle of object domain computations that must be associated with a subsequent flush/invalidate emmission into the ring. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25drm/i915: Always read pipestat in irq_handlerKeith Packard
Because we write pipestat before iir, it's possible that a pipestat interrupt will occur between the pipestat write and the iir write. This leaves pipestat with an interrupt status not visible in iir. This may cause an interrupt flood as we never clear the pipestat event. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25drm/i915: Subtract total pinned bytes from available aperture sizeKeith Packard
The old code was wandering through the active list looking for pinned buffers; there may be other pinned buffers around. Fortunately, we keep a count of the total amount of pinned memory and can use that instead. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25drm/i915: Avoid BUG_ONs on VT switch with a wedged chipset.Eric Anholt
Instead, just warn that bad things are happening and do our best to clean up the mess without the GPU's help. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25drm/i915: Remove IMR masking during interrupt handler, and restart it if needed.Eric Anholt
The IMR masking was a technique recommended for avoiding getting stuck with no interrupts generated again in MSI mode. It kept new IIR bits from getting set between the IIR read and the IIR write, which would have otherwise prevented an MSI from ever getting generated again. However, this caused a problem for vblank as the IMR mask would keep the pipe event interrupt from getting reflected in IIR, even after the IMR mask was brought back down. Instead, just check the state of IIR after we ack the interrupts we're going to handle, and restart if we didn't get IIR all the way to zero. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25drm/i915: Manage PIPESTAT to control vblank interrupts instead of IMR.Keith Packard
The pipestat fields affect reporting of all vblank-related interrupts, so we have to reset them during the irq_handler, and while enabling vblank interrupts. Otherwise, if a pipe status field had been set to non-zero before enabling reporting, we would never see an interrupt again. This patch adds i915_enable_pipestat and i915_disable_pipestat to abstract out the steps needed to change the reported interrupts. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-11drm/i915: Move legacy breadcrumb out of the reserved status page areaKeith Packard
Addresses in the hardware status page below index 0x20 are reserved for use by the hardware. The legacy breadcrumb was sitting at index 5. Move it to index 0x21, and make sure everyone uses the defined value instead of hard-coded constants. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGADave Airlie
This fixes hangs on 855-class hardware by avoiding double attachment of the driver due to the stub second head device having the same pci id as the real device. Other DRM drivers probably want this treatment as well, but I'm applying it just to this one for safety. But we should clean up the drm_pciids.h mess now so that each driver has its own pci id list header in its own directory. Lets do that in the next release. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-11drm/radeon: map registers at load timeDave Airlie
Now that the radeon driver has suspend/resume functions, it needs to map its registers at load time or it will likely crash if a suspend operation occurs before the driver has been initialized. This patch moves the register mapping code from firstopen to load and makes the mapping into a _DRM_DRIVER one so that the core won't remove it at lastclose time. Fixes (at least partially) kernel bz #11891. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11drm: Remove infrastructure for supporting i915's vblank swapping.Eric Anholt
It's not used in any other drivers, and doesn't look like it will be from drm.git master. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11i915: Remove racy delayed vblank swap ioctl.Eric Anholt
When userland detected that this ioctl was supported (by version number check), it used it in a racy way -- dispatch delayed swap, wait for vblank, continue rendering. As there was no mechanism for it to wait for the swap to finish, sometimes it would render before the swap and garbage would be displayed on the screen. By removing the ioctl and returning -EINVAL, userland returns to its previous, correct rendering path of waiting for a vblank then dispatching a swap. The only path that could have used this ioctl correctly was page flipping, which relied on only one client running and emitting wait-for-vblank-before-rendering in the command stream. That path also falls back correctly, at the performance cost of not being able to queue up rendering before the flip occurs. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11i915: Don't whine when pci_enable_msi() fails.Eric Anholt
This probably just means the chipset doesn't support MSI, which is fine. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11i915: Don't attempt to short-circuit object_wait_rendering by checking domains.Owen Taylor
This could return early when reading after writing a buffer, if somebody had already put it on the flushing list (write domains are 0, but still active), leading to glReadPixels failure. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11i915: Clean up sarea pointers on leavevtKeith Packard
This corresponds to the setup of the sarea pointers in DMA initialization, though neither is exactly the point at which the sarea is set up or torn down. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11i915: Save/restore MCHBAR_RENDER_STANDBY on GM965/GM45Keith Packard
This register is set by the 2D driver to prevent lockups, and so it needs to be preserved across suspend/resume too. This makes my X200s work. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-03Merge branch 'io-mappings-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'io-mappings-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: io mapping: clean up #ifdefs io mapping: improve documentation i915: use io-mapping interfaces instead of a variety of mapping kludges resources: add io-mapping functions to dynamically map large device apertures x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmaps
2008-11-03Merge branch 'drm-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: i915: Add GEM ioctl to get available aperture size. drm/radeon: fixup further bus mastering confusion. build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=n
2008-11-03i915: Add GEM ioctl to get available aperture size.Eric Anholt
This will let userland know when to submit its batchbuffers, before they get too big to fit in the aperture. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-01saner FASYNC handling on file closeAl Viro
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-31i915: use io-mapping interfaces instead of a variety of mapping kludgesKeith Packard
Impact: optimize/clean-up the IO mapping implementation of the i915 DRM driver Switch the i915 device aperture mapping to the io-mapping interface, taking advantage of the cleaner API to extend it across all of the mapping uses, including both pwrite and relocation updates. This dramatically improves performance on 64-bit kernels which were using the same slow path as 32-bit non-HIGHMEM kernels prior to this patch. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28drm/radeon: fixup further bus mastering confusion.Alex Deucher
rs400/480 are like previous chips not like rs6xx chips. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-28build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=nLen Brown
drivers/gpu/drm/i915/i915_opregion.c:340: error: implicit declaration of function ‘register_acpi_notifier’ drivers/gpu/drm/i915/i915_opregion.c:361: error: implicit declaration of function ‘unregister_acpi_notifier’ Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23Merge branch 'drm-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Avoid oops in DRM_IOCTL_RM_DRAW if a bad handle is supplied. drm: Add 32-bit compatibility for DRM_IOCTL_UPDATE_DRAW. drm/i915: use pipes, not planes to label vblank data drm/i915: hold dev->struct_mutex and DRM lock during vblank ring operations i915: Fix format string warnings on x86-64. i915: Don't dereference HWS in /proc debug files when it isn't initialized. i915: Enable IMR passthrough of vblank events before enabling it in pipestat. drm: Remove two leaks of vblank reference count in error paths. drm: fix leak of cliprects in drm_rmdraw() i915: Disable MSI on GM965 (errata says it doesn't work) drm: Set cliprects to NULL when changing drawable to having 0 cliprects. i915: Protect vblank IRQ reg access with spinlock
2008-10-23drm: Avoid oops in DRM_IOCTL_RM_DRAW if a bad handle is supplied.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Michel Dänzer <michel@tungstengraphics.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23drm: Add 32-bit compatibility for DRM_IOCTL_UPDATE_DRAW.Eric Anholt
This fixes vblank support for a 32-bit X Server on a 64-bit kernel. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23drm/i915: use pipes, not planes to label vblank dataKeith Packard
vblank in the kernel is far simpler if it deals with pipes instead of planes, so we're changing both user and kernel side. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23drm/i915: hold dev->struct_mutex and DRM lock during vblank ring operationsKeith Packard
To synchronize clip lists with the X server, the DRM lock must be held while looking at drawable clip lists. To synchronize with other ring access, the ring mutex must be held while inserting commands into the ring. Failure to do the first resulted in easy visual corruption when moving windows, and the second could have corrupted the ring with DRI2. Grabbing the DRM lock involves using the DRM tasklet mechanism, grabbing the ring mutex means potentially sleeping. Deal with both of these by always running the tasklet from a work handler. Also, protect from clip list changes since the vblank request was queued by making sure the window has at least one rectangle while looking inside, preventing oopses . Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23i915: Fix format string warnings on x86-64.Linus Torvalds
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23i915: Don't dereference HWS in /proc debug files when it isn't initialized.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23i915: Enable IMR passthrough of vblank events before enabling it in pipestat.Eric Anholt
Otherwise, if we lost the race, the pipestat bit would be set without being reflected in IIR, and we would never clear the pipestat bit so the pipe event would never be generated again, and all vblank waits would time out. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23drm: Remove two leaks of vblank reference count in error paths.Eric Anholt
If the failing paths were hit, the vblank IRQ would never get turned off again. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23drm: fix leak of cliprects in drm_rmdraw()Zhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23i915: Disable MSI on GM965 (errata says it doesn't work)Keith Packard
Current Intel errata for the GM965 says that using MSI may cause interrupts to be delayed or lost. The only workaround offered is to not use it. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23drm: Set cliprects to NULL when changing drawable to having 0 cliprects.Zhenyu Wang
This avoids setting the cliprects pointer to a zero-sized allocation. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23i915: Protect vblank IRQ reg access with spinlockKeith Packard
This uses the same spinlock as the user_irq code as it shares the same register, ensuring that interrupt registers are updated atomically. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-20Export tiny shmem_file_setup for DRM-GEMHugh Dickins
We're trying to keep the !CONFIG_SHMEM tiny-shmem.c (using ramfs without swap) in synch with CONFIG_SHMEM shmem.c (and mpm is preparing patches to combine them). I was glad to see EXPORT_SYMBOL_GPL(shmem_file_setup) go into shmem.c, but why not support DRM-GEM when !CONFIG_SHMEM too? But caution says still depend on MMU, since !CONFIG_MMU is.. different. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Matt Mackall <mpm@selenic.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20fix CONFIG_HIGHMEM compile error in drivers/gpu/drm/i915/i915_gem.cThomas Gleixner
commit 9b7530cc329eb036cfa589930c270e85031f554c ("i915: cleanup coding horrors in i915_gem_gtt_pwrite()") broke the i386 build for CONFIG_HIGHMEM=y. Caught by automatic testing http://www.tglx.de/autoqa-logs/000137-0006-0001.log Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ My bad. It's the same patch I sent out earlier, nobody noticed then either.. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>