aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2010-01-08DRM / i915: Fix resume regression on MSI Wind U100 w/o KMSRafael J. Wysocki
Commit cbda12d77ea590082edb6d30bd342a67ebc459e0 (drm/i915: implement new pm ops for i915), among other things, removed the .suspend and .resume pointers from the struct drm_driver object in i915_drv.c, which broke resume without KMS on my MSI Wind U100. Fix this by reverting that part of commit cbda12d77ea59. [ The DRM layer will not use the class-specific suspend/resume functions if the driver is marked MODESET-aware, and conversely it will not register the PCI device if the drievr isn't so marked, so you always end up with _either_ the drm-class suspend/resume _or_ the PCI layer PM functionality, never both. - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-06Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: rs600: use correct mask for SW interrupt gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test drm/radeon/radeon_device.c: move a dereference below a NULL test drm/radeon/radeon_fence.c: move a dereference below the NULL test drm/radeon/radeon_connectors.c: add a NULL test before dereference drm/radeon/kms: fix memory leak drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line() drm/edid: Fix CVT width/height decode drm/edid: Skip empty CVT codepoints drm: remove address mask param for drm_pci_alloc() drm/radeon/kms: add missing breaks in i2c and ss lookups drm/radeon/kms: add primary dac adj values table drm/radeon/kms: fallback to default connector table
2010-01-07Merge remote branch 'korg/drm-radeon-next' into drm-linusDave Airlie
* korg/drm-radeon-next: drm/radeon/kms: rs600: use correct mask for SW interrupt gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test drm/radeon/radeon_device.c: move a dereference below a NULL test drm/radeon/radeon_fence.c: move a dereference below the NULL test drm/radeon/radeon_connectors.c: add a NULL test before dereference drm/radeon/kms: fix memory leak drm/radeon/kms: add missing breaks in i2c and ss lookups drm/radeon/kms: add primary dac adj values table drm/radeon/kms: fallback to default connector table
2010-01-07drm/radeon/kms: rs600: use correct mask for SW interruptLuca Tettamanti
The mask happens to be the same, but the IH is reading the status, not the not the control register. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL testDarren Jenkins
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13338 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/radeon_device.c: move a dereference below a NULL testDarren Jenkins
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13335 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/radeon_fence.c: move a dereference below the NULL testDarren Jenkins
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13334 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/radeon_connectors.c: add a NULL test before dereferenceDarren Jenkins
The encoder variable can be NULL in this function so I believe it should be checked before dereference. Coverity CID: 13253 [airlied: extremely unlikely to happen] Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/kms: fix memory leakJiri Slaby
Stanse found a memory leak in radeon_master_create. master_priv is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07Merge branch 'drm-core-next' into drm-linusDave Airlie
* drm-core-next: drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line() drm/edid: Fix CVT width/height decode drm/edid: Skip empty CVT codepoints drm: remove address mask param for drm_pci_alloc()
2010-01-07drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()Roel Kluin
This always evaluates to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/edid: Fix CVT width/height decodeAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/edid: Skip empty CVT codepointsAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm: remove address mask param for drm_pci_alloc()Zhenyu Wang
drm_pci_alloc() has input of address mask for setting pci dma mask on the device, which should be properly setup by drm driver. And leave it as a param for drm_pci_alloc() would cause confusion or mistake would corrupt the correct dma mask setting, as seen on intel hw which set wrong dma mask for hw status page. So remove it from drm_pci_alloc() function. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (23 commits) drm/i915: remove full registers dump debug drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function drm/i915: Select the correct BPC for LVDS on Ironlake drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake drm/i915: Enable/disable the dithering for LVDS based on VBT setting drm/i915: Permit pinning whilst the device is 'suspended' drm/i915: Hold struct mutex whilst pinning power context bo. drm/i915: fix unused var drm/i915: Storage class should be before const qualifier drm/i915: remove render reclock support drm/i915: Fix RC6 suspend/resume drm/i915: execbuf2 support drm/i915: Reload hangcheck timer too for Ironlake drm/i915: only enable hotplug for detected outputs drm/i915: Track whether cursor needs physical address in intel_device_info drm/i915: Implement IS_* macros using static tables drm/i915: Move PCI IDs into i915 driver drm/i915: Update LVDS connector status when receiving ACPI LID event drm/i915: Add MALATA PC-81005 to ACPI LID quirk list drm/i915: implement new pm ops for i915 ...
2010-01-06drm/i915: remove full registers dump debugZhenyu Wang
This one reverts 9e3a6d155ed0a7636b926a798dd7221ea107b274. As reported by http://bugzilla.kernel.org/show_bug.cgi?id=14485, this dump will cause hang problem on some machine. If something really needs this kind of full registers dump, that could be done within intel-gpu-tools. Cc: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Add DP dpll limit on ironlake and use existing DPLL search functionZhao Yakui
For some clocks, the old Ironlake DPLL calculator wold give m/n/p combinations that didn't match the spreadsheet of what HW validation tests. Instead, use the G4X DPLL calculator, which does a better job at it. So we use the intel_g4x_find_best_pll to calculate the DPLL for CRT/HDMI/LVDS on ironlake. At the same time to consider the dpll setting for display port, we add the display port DPLL limit on ironlake, which will directly use the function of intel_find_pll_ironlake_dp to get the corresponding dpll setting. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Select the correct BPC for LVDS on IronlakeZhao Yakui
Select the correct BPC for LVDS on Ironlake. If it is 18-bit LVDS panel, the BPC will be 6. When it is 24-bit LVDS panel, the BPC will 8. At the same time the BPC will be 8 when the output device is CRT/HDMI/DP. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in ↵Zhao Yakui
pipeconf on Ironlake Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Enable/disable the dithering for LVDS based on VBT settingZhao Yakui
Enable/disable the dithering for LVDS based on VBT setting. On the 965/g4x platform the dithering flag is defined in LVDS register. And on the ironlake the dithering flag is defined in pipeconf register. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Permit pinning whilst the device is 'suspended'Chris Wilson
As pinning (allocating and binding GTT memory) does not actually invoke GPU commands, it is safe, and indeed is attempted, during resumption from suspension: [drm:intel_init_clock_gating] *ERROR* failed to pin power context: -16 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Hold struct mutex whilst pinning power context bo.Chris Wilson
Hugh found an error path where we were attempting to unref a bo without holding the struct mutex: [drm:intel_init_clock_gating] *ERROR* failed to pin power context: -16 ------------[ cut here ]------------ WARNING: at drivers/gpu/drm/drm_gem.c:438 drm_gem_object_free+0x20/0x5e() Hardware name: ESPRIMO Mobile V5505 Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device Pid: 3793, comm: s2ram Not tainted 2.6.33-rc2 #4 Call Trace: [<7815298e>] warn_slowpath_common+0x59/0x6b [<781529b3>] warn_slowpath_null+0x13/0x18 [<78317c1a>] ? drm_gem_object_free+0x20/0x5e [<78317c1a>] drm_gem_object_free+0x20/0x5e [<78317bfa>] ? drm_gem_object_free+0x0/0x5e [<7829df11>] kref_put+0x38/0x45 [<7833a5f0>] intel_init_clock_gating+0x232/0x271 [<78317bfa>] ? drm_gem_object_free+0x0/0x5e [<7832c307>] i915_restore_state+0x21a/0x2b3 [<7832379d>] i915_resume+0x3c/0xbb [<78174fe5>] ? trace_hardirqs_on_caller+0xfc/0x123 [<7831c756>] ? drm_class_resume+0x0/0x3e [<7831c78d>] drm_class_resume+0x37/0x3e [<78351e0a>] legacy_resume+0x1e/0x51 [<78351ece>] device_resume+0x91/0xab [<7831c756>] ? drm_class_resume+0x0/0x3e [<78352226>] dpm_resume+0x58/0x10f [<783522fb>] dpm_resume_end+0x1e/0x2c [<78180f80>] suspend_devices_and_enter+0x61/0x84 [<78180ff8>] enter_state+0x55/0x83 [<7818091c>] state_store+0x94/0xaa [<7829d09e>] kobj_attr_store+0x1e/0x23 [<782098e0>] sysfs_write_file+0x66/0x99 [<781cd2f0>] vfs_write+0x8a/0x108 [<781cd408>] sys_write+0x3c/0x63 [<78125c10>] sysenter_do_call+0x12/0x36 ---[ end trace a343537f29950fda ]--- It is in fact slightly more insiduous that first appears since we are attempting to not just free the object without the lock, but are trying to do the whole bo manipulation without holding the lock. Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: fix unused varAndrew Morton
drivers/gpu/drm/i915/i915_dma.c: In function 'i915_driver_load': drivers/gpu/drm/i915/i915_dma.c:1114: warning: 'll_base' may be used uninitialized in this function Partly this is because gcc isn't smart enough. But `ll_base' does get used uninitialised in the DRM_DEBUG() call. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: remove render reclock supportJesse Barnes
This code generally fails to adjust the render clock, and when it does, it conflicts with some other register settings and can cause problems. So remove this code altogether. I'm reworking it now to do the right thing, but the only bit it will share is the VBT check for whether reclocking is supported, so I'm leaving that bit. Reverts most of 652c393a3368af84359da37c45afc35a91144960 ("add dynamic clock frequency control"), though for many the regressions showed up in the later 181a5336d6cc836f05507410d66988c483ad0154 ("Fix render reclock availability detection"). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: Fix RC6 suspend/resumeAndrew Lutomirski
We restored RC6 twice on resume, even with modesetting off. Instead, only restore it once and skip RC6 initialization entirely in non-KMS mode. Signed-off-by: Andy Lutomirski <luto@mit.edu> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: execbuf2 supportJesse Barnes
This patch adds a new execbuf ioctl, execbuf2, for use by clients that want to control fence register allocation more finely. The buffer passed in to the new ioctl includes a new relocation type to indicate whether a given object needs a fence register assigned for the command buffer in question. Compatibility with the existing execbuf ioctl is implemented in terms of the new code, preserving the assumption that fence registers are required for pre-965 rendering commands. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [ickle: Remove pre-emptive clear_fence_reg()] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> [anholt: Removed dmesg spam] Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/radeon/kms: add missing breaks in i2c and ss lookupsAlex Deucher
Should fix fdo bug 25741 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06drm/radeon/kms: add primary dac adj values tableAlex Deucher
Look up primary dac adj values from the table if there is no bios or bios dac table to reference. The lookup table may need to be adjusted for certain families. Should fix kernel bug 14945. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06drm/radeon/kms: fallback to default connector tableAlex Deucher
if necessary for combios Some early combios radeon cards don't have a connector table or dac table in the bios, if they do not, fallback to the default tables. Should fix kernel bug 14963. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits) drm/radeon/kms: add definitions for v4 power tables drm/radeon/kms: never combine LVDS with another encoder drm/radeon/kms: Check module arguments to be valid V2 drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4) drm/radeon/kms: add 3DC compression support drm/radeon/kms: allow rendering while no colorbuffer is set on r300 drm/radeon/kms: enable memory clock reading on legacy (V2) drm/radeon/kms: prevent parallel AtomBIOS calls drm/radeon/kms: set proper default tv standard drm/radeon/kms: fix legacy rmx drm/radeon/kms/atom: fill in proper defines for digital setup drm/kms: silencing a false positive warning. drm/mm: fix logic for selection of best fit block drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles. drm/vmwgfx: Return -ERESTARTSYS when interrupted by a signal. drm/vmwgfx: Fix unlocked ioctl and add proper access control drm/radeon: fix build on 64-bit with some compilers. drivers/gpu: Use kzalloc for allocating only one thing DRM: Rename clamp variable ...
2009-12-23Merge remote branch 'korg/drm-radeon-next' into drm-linusDave Airlie
* korg/drm-radeon-next: drm/radeon/kms: add definitions for v4 power tables drm/radeon/kms: never combine LVDS with another encoder drm/radeon/kms: Check module arguments to be valid V2 drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4) drm/radeon/kms: add 3DC compression support drm/radeon/kms: allow rendering while no colorbuffer is set on r300 drm/radeon/kms: enable memory clock reading on legacy (V2) drm/radeon/kms: prevent parallel AtomBIOS calls drm/radeon/kms: set proper default tv standard drm/radeon/kms: fix legacy rmx drm/radeon/kms/atom: fill in proper defines for digital setup
2009-12-23drm/radeon/kms: add definitions for v4 power tablesAlex Deucher
[airlied: just adding this for completeness to avoid drift between public atombios.h files] Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: never combine LVDS with another encoderAlex Deucher
When linking multiple encoders to a connector, make sure to not link LVDS with another connector. Some bioses have the same i2c line for LVDS and VGA. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: Check module arguments to be valid V2Jerome Glisse
This patch add a function which check module argument to be valid. On invalid argument it prints a warning and setback the default value. V2: Allow 0 for vram limit & agp mode which are the default value Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structureJerome Glisse
Add boolean to record if some part of the driver are initialized or not this allow to avoid a crash when trying to cleanup uninitialized structure members. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4)Alex Deucher
This fixes LVDS on some mac laptops without a panel edid. v2 - Set proper mode type flags v3 - Note that this is not neceesarily the exact panel mode, but an approximation based on the cvt formula. For these systems we should ideally read the mode info out of the registers or add a mode table, but this works and is much simpler. v4 - Update comments and debug message. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: add 3DC compression supportMarek Olšák
There are 2 formats: ATI1N: 64 bits per 4x4 block, one-channel format ATI2N: 128 bits per 4x4 block, two-channel format Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: allow rendering while no colorbuffer is set on r300Marek Olšák
Because hardware cannot disable all colorbuffers directly to do depth-only rendering, a user should: - disable reading from a colorbuffer in blending - disable fastfill - set the color channel mask to 0 to prevent writing to a colorbuffer Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: enable memory clock reading on legacy (V2)Rafał Miłecki
V2: detect IGP cards (which don't have own memory) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: prevent parallel AtomBIOS callsRafał Miłecki
This just adds a mutex around the atombios table execution so we don't call it from two contexts at once. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: set proper default tv standardAlex Deucher
we were just using 1 before. reported on irc by soreau Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: fix legacy rmxAlex Deucher
This makes 640x480 on my R100 work again, both in aspect and centered mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Tested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms/atom: fill in proper defines for digital setupAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23Merge remote branch 'nouveau/for-airlied' into drm-linusDave Airlie
* nouveau/for-airlied: drm/nouveau: fix bug causing pinned buffers to lose their NO_EVICT flag drm/nv50: fix suspend/resume delays without firmware present drm/nouveau: prevent all channel creation if accel not available drm/nv50: fix two potential suspend/resume oopses drm/nv40: implement ctxprog/state generation drm/nv10: Add the initial graph context and soft methods needed for LMA. drm/nouveau: Fix up buffer eviction, and evict them to GART, if possible. drm/nouveau: Add proper error handling to nouveau_card_init drm/nv04: Fix NV04 set_operation software method. drm/nouveau: Kill global state in BIOS script interpreter drm/nouveau: Kill global state in NvShadowBIOS drm/nouveau: use drm debug levels drm/i2c/ch7006: Fix load detection false positives right after system init. drm/nv04-nv40: Fix "conflicting memory types" when saving/restoring VGA fonts.
2009-12-23drm/kms: silencing a false positive warning.Marin Mitov
warning: 'width' may be used uninitialized in this function drivers/gpu/drm/drm_edid.c Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/mm: fix logic for selection of best fit blockBob Gleitsmann
This is from bug 25728. [airlied: I'm just forwarding the patch for review, Thomas, ickle?] Acked-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.Thomas Hellstrom
Improve the command verifier to catch all occurences of surface handles, and translate to SIDs. This way DMA buffers and 3D surfaces share a common handle space, which makes it possible for the kms code to differentiate. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/vmwgfx: Return -ERESTARTSYS when interrupted by a signal.Thomas Hellstrom
Fixes for TTM API change. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/vmwgfx: Fix unlocked ioctl and add proper access controlThomas Hellstrom
This fixes up vmwgfx for the unlocked ioctl code to avoid doing it in the driver. Also adds ioctl flags. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 07:39:09 +0000