aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2007-10-14USBHID: report descriptor fix for MacBook JIS keyboardTomoya Adachi
This patch fixes the problem, that Japanese MacBook doesn't recognize some keys like '\'(yen, or backslash), '|'(pipe), and '_'(underscore). It is due to that MacBook JIS keyboard (jp106) sends wrong report descriptor. It saids "logical maximum = 0x65", so Keyboard.0089 is mapped to Key.Unknown, while it should be accepted as Key.Yen. Signed-off-by: Tomoya Adachi <adachi@il.is.s.u-tokyo.ac.jp> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: trivial fixes in hid-debugJoe Perches
- added KERN_DEBUG to output lines - fixed preffered -> preferred typo - added const to char *'s Also, exported symbol hid_resolv_event is unused by the current kernel tree and perhaps should be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: fix input mapping for Microsoft Ergonomic KeyboardJiri Kosina
Special keys 1-5 on Microsoft Ergonomic Keyboard were mistakenly mapped to buttons, which doesn't make a lot of sense. Fix this mapping to KEY_F{13,18}. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: use hid-plff driver for GreenAsia 0e8f:0003 devicesAnssi Hannula
Add 0e8f:0003 into the list of devices supported by the hid-plff force feedback driver. These devices identify themselves as "GreenAsia Inc. USB Joystick " and can be either adapters or actual game controllers. The testing was done with a Köng Gaming gamepad. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14USBHID: Add HID_QUIRK_NOGET for ELO Touch Screen 2700 displayMike Crowe
Use HID_QUIRK_NOGET for the ELO TS2700 touch screen USB HID device in order to avoid a timeout during initialisation. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: enable hiddev for the SantaRosa MacBookPro IR receiverStelian Pop
The infrared remote receiver found in the SantaRosa MacBookPro laptops (MacBookPro3,1) need to be forced to expose a HIDDEV interface (instead of HIDINPUT) so that lirc can access it using the 'macmini' driver. The patch below adds the required quirk for forcing the HIDDEV interface to be activated (HID_QUIRK_HIDDEV) and introduces a new quirk which forces the HIDINPUT interface to be ignored (HID_QUIRK_IGNORE_HIDINPUT). Note that Apple calls this receiver 'IRController4' (info taken from Apple's driver Info.plist). Older Mac{Book,Mini,Pro}s seem to all use the 'IRController1' device (USB id 05ac:8240) which doesn't need those quirks. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14USBHID: add CM109 device to blacklistAlfred E. Heggestad
There is a separate driver cm109 for handling this device. Signed-off-by: Alfred E. Heggestad <aeh@db.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: Report usage codes of keys as EV_MSC scancode eventsJiri Kosina
Current HID layer does not report usage codes to the input layer. This feature was previously removed, because it caused unnecessary storm of events in cases of positioning devices, etc. This patch adds reporting of usage codes as EV_MSC events only for key events. We issue the EV_MSC event only if the state of the key corresponding to the given code has changed, so that we don't report usages that are sent in every report even if the state hasn't changed (for example Shift/Caps Lock/... states as sent by various keyboards). This functionality is required at least by KeyTouch in order to provide convenient means for remapping the usage codes. Cc: Marvin Raaijmakers <marvin.nospam@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: ignore all non-LED usages in output fields in hid-inputJiri Kosina
We have to ignore all non-LED usages in output fields if the report descriptor of the device specifies any. If we don't do so, the devices which contain the same usages both in input and output reports with different parameters will mess things up. In hid-input, we currently care only for the input usages, with exception for LEDs. All other output usages should be properly handled by appropriate force-feedback driver. Fixes auto-calibration for Saitek Cyborg Evo Force joystick. Reported-by: Renato Golin <rengolin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: fix whitespace damageJiri Kosina
Fixes some trivial whitespace damage in hid-input.c Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: add support for Thrustmaster FGT Force Feedback wheelDmitry Torokhov
Rework thrustmaster force-feedback module to support devices having different types of force feedback effects. Add signatures of Thrustmaster FGT Rumble Force and Thrustmaster FGT Force Feedback wheels to the list of devices dupported by the module. Parts of the patch were lifted off a simalar patch by Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: minimal autosuspend support for USB HID devicesOliver Neukum
Autosuspend for USB HID devices remains problematic as far as mice and keyboards are concerned. While I am working on a grand solution, here's a minimalist patch that works for those devices not continously in use. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-10-14HID: add support for Microsoft Natural Ergonomic Keyboard 4000Jiri Kosina
This keyboard emits a few usages that are not handled properly by hid-input. The usages from MSVENDOR page are colliding with Chicony Tactical Pad device, so we have to distinguish in runtime. Ugly ... Also, the buttons 1-5 have to be handled in a non-standard way, as they are emitted by the keyboard in a bitfield-like fashion, but the field is not presented as bit-field by the keyboard. The keys can't be pressed simultaneously, so the handling we have is correct. This patch also extends hid_keyboard[] with KPLeftParenthesis and KPRightParenthesis as defined by Keyboard page in HUT 1.12. The corresponding usages are also emitted by this keyboard. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-18Add some help texts to recently-introduced kconfig itemsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-02HID: Never call hid_free_buffers() when usbhid_device has been freedJiri Kosina
We can't call hid_free_buffers() when the underlying usbhid_device has already been freed. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: fix memory leak of usbhid_deviceJiri Kosina
Add forgotten freeing of usbhid_device structure. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: fix a possible NULL pointer dereference when we fail to allocate memoryJesper Juhl
If, in usb_hid_configure(), we fail to allocate storage for 'usbhid', "if (!(usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL)))", then we'll jump to the 'fail:' label where we have this code: usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); Since we got here because we couldn't allocate storage for 'usbhid', what we have here is a NULL pointer dereference - ouch... This patch solves that little problem by adding a new 'fail_no_usbhid:' label after the problematic calls to usb_free_urb() and jumps to that one instead, in the problem case. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: add ASUS LCM to the blacklistChristian Lamparter
Some of ASUS' notebooks (e.g G Series) include a tiny oled display, which is attached to an internal USB bus. Unfortunatly the device reports a wrong DeviceDescriptor and is therefore identified as a HID device... Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: Add all Logitech Harmonies to blacklistPhil Dibowitz
This patch adds the entire range of Logitech's ProductIDs that are reserved for their Harmony remotes. The in-kernel HID driver can't do anything with these, and now there is a GPL user-space application that can handle them: http://www.sf.net/projects/harmonycontrol Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02HID: remove the Applie IR sensor from the hid_blacklistTino Keitel
The IR sensor in some newer Apple computers has no other driver in the kernel, yet. However, the macmini driver in lirc requires a HID device for the IR sensor. Cc: Soeren Sonnenburg <kernel@nn7.de> Signed-off-by: Tino Keitel <tino.keitel@tikei.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-12USB: add reset_resume methodAlan Stern
This patch (as918) introduces a new USB driver method: reset_resume. It is called when a device needs to be reset as part of a resume procedure (whether because of a device quirk or because of the USB-Persist facility), thereby taking over a role formerly assigned to the post_reset method. As a consequence, post_reset no longer needs an argument indicating whether it is being called as part of a reset-resume. This separation of functions makes the code clearer. In addition, the pre_reset and post_reset method return types are changed; they now must return an error code. The return value is unused at present, but at some later time we may unbind drivers and re-probe if they encounter an error during reset handling. The existing pre_reset and post_reset methods in the usbhid, usb-storage, and hub drivers are updated to match the new requirements. For usbhid the post_reset routine is also used for reset_resume (duplicate method pointers); for the other drivers a new reset_resume routine is added. The change to hub.c looks bigger than it really is, because mark_children_for_reset_resume() gets moved down next to the new hub_reset_resume() routine. A minor change to usb-storage makes the usb_stor_report_bus_reset() routine acquire the host lock instead of requiring the caller to hold it already. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: add USB-Persist facilityAlan Stern
This patch (as886) adds the controversial USB-persist facility, allowing USB devices to persist across a power loss during system suspend. The facility is controlled by a new Kconfig option (with appropriate warnings about the potential dangers); when the option is off the behavior will remain the same as it is now. But when the option is on, people will be able to use suspend-to-disk and keep their USB filesystems intact -- something particularly valuable for small machines where the root filesystem is on a USB device! Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09Merge branches 'debug-module-param' and 'upstream' into for-linusJiri Kosina
2007-07-09HID: handle cases of volume knobs generating relative valuesJiri Kosina
There are some devices (for example Dell Multimedia Keyboard SK-8135) that have a volume control knob which generates relative events instead of absolute. hid-input maps them to ABS_VOLUME. HUT pages don't restrict volume to absolute values. Adding REL_VOLUME doesn't seem feasible, nothing knows how to handle it. This patch translates relative ABS_VOLUME events into appropriate number of series of VOLUME_UP or VOLUME_DOWN events respectively, so that userspace sees the correct values in the end. kernel.org bugzilla 5233 Reported-by: Jochen Eisinger <jochen@penguin-breeder.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: Logitech keyboard 0xc311 needs reset leds quirkJiri Kosina
The keyboard 0x046d/0xc311 needs reset leds quirk Tested-by: Antonino Ingargiola <tritemio@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for logitech cordless desktop LX500 special mappingRyo Dairiki
This keyboard has wireless mouse which has left, middle, right buttons and 2-dimensional scrolling wheel. Unfornetuly, this wheel reports side scrolling events and 11 or 12 button events at the same time. I've wrote a patch to fix this mapping. I'm not sure if this mapping is proper for buttons, because , for example, there is no entry for "burn cd" in input.h. The patch also supress 11 and 12 button events from mouse when you scroll the wheel left and right. With this patch, only side scrolling events are reported. (This mouse has only 4 buttons and 2D wheel. There is no such buttons like 11 and 12.) Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: fix autocentering of PID devicesDiogo Kastrup
When setting the autocentering of PID devices, PID_DIRECTION_ENABLE is not being explicitely set to 1. This results in autocentering working only on the vertical axis when this field is preset to 0. Fix that by setting it explicitely to 1 when preparing the set_effect report for autocentering spring effect. Signed-off-by: Diogo Kastrup <dk@bighost.com.br> Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: separate quirks for report descriptor fixupJiri Kosina
Lately there have been quite a lot of bug reports against broken devices which require us to fix their report descriptor in the runtime, before it is passed to the HID parser. Those devices have eaten quite an amount of our quirks space, which isn't particularly necessary - the quirks are not needed after the report descriptor is parsed, and they just consume bits. Therefore this patch separates the quirks for report descriptor fixup, and moves their handling into separate code. The quirks are then forgotten as soon as the report descriptor has been parsed. Module parameter 'rdesc_quirks' is introduced to be able to modify these quirks in runtime in a similar way to 'quirks' parameter for ordinary HID quirks. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: Add NOGET quirk for all NCR devicesJiri Kosina
Devices manufactured by NCR have userspace hiddev-based drivers, which do all the necessary device querying by themselves. The devices must not be queried directly by the generic HID driver, as reported by NCR engineers. Cc: Petr Ostadal <postadal@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for Petalynx Maxter remote controlJiri Kosina
Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from consumer page (reserved in HUT 1.12) for back and more keys. It also emits a few usages from LOGIVENDOR page, which need adding. Also, this device has broken report descriptor - the reported maximum is too low - it doesn't contain the range for 'back' and 'more' keys, so we need to bump it up before the report descriptor is being parsed. Besides all this, it also requires NOGET quirk. This patch does so. [1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=en Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: fix mismatch between hid-input HUT find/search mapping and the HUTHans de Goede
When comparing usb vs ps2 / testing the keycodes generated for the easy access keys on my trust (microsoft compatible) keyboard. I noticed the search key generated the keycode for find when connected through USB. This lead me to check the consumer page mappings in hid-input.c . And it turns out the the mapping for ID 0x221 deviates from the HUT standard document: http://www.usb.org/developers/devclass_docs/Hut1_12.pdf Currently it is incorrectly mapped to find, whereas it should be mapped to search. I also added missing bindings for ID 0x21f, the real find and for 0x222, goto. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for Gameron dual psx adaptorJulien Eyries
This patch provides support for the Gameron dual psx adaptor. The modification is to add the quirk HID_QUIRK_MULTI_INPUT for this specific USB device. Signed-off-by: Julien Eyries <jeyries@yahoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09USB HID: avoid flush_scheduled_work()Alan Stern
This patch (as914) replaces a call to flush_scheduled_work() with cancel_work_sync(), in order to help avoid potential deadlocks. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: Use menuconfig objectsJan Engelhardt
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: force hid-input for Microsoft SideWinder GameVoice deviceJiri Kosina
Microsoft SideWinder GameVoice driver is a trivial device with a few buttons (0x09 HID usage) and an audio connector, which just forwards the audio input into oridinary sound card present in the computer. Despite this fact, the only interface of this device reports itself as a Telephony/Headset type of HID device. This is apparently incorrect - the device itself doesn't provide any audio/telephony functionality. This is achieved in userland application which only needs to receive the button events from the HID driver. This patch establishes a new quirk which forces hid-input to claim a device it will otherwise leave untouched. Reported-by: Tomas Carnecky <tom@dbservice.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: input mapping for Chicony KU-0418 tactical padJiri Kosina
Chicony KU-0418 (aka Saitek PZ08AU gaming keyboard) has a separate "tactical pad" with 11 non-functional buttons - they generate usage codes from 0xff00 (MSVENDOR) usage page. Special case handling for this keyboard added, so no later clash with MSVENDOR mappings is going to occur. Pointed out in bugzilla #7352 Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: make debugging output runtime-configurableJiri Kosina
There have been many reports recently about broken HID devices, the diagnosis of which required users to recompile their kernels in order to be able to provide debugging output needed for coding a quirk for a particular device. This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it possible to control debugging output produced by HID code by supplying 'debug=1' module parameter. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-10USB HID: hiddev - fix race between hiddev_send_event() and hiddev_release()Jiri Kosina
There is a small race window in which hiddev_release() could corrupt the list that is being processed for new event in hiddev_send_event(). Synchronize the operations over this list. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09HID: add hooks for getkeycode() and setkeycode() methodsMarvin Raaijmakers
Provide hooks for getkeycode() and setkeycode() methods to input_dev. Signed-off-by: Marvin Raaijmakers <marvin.raaijmakers@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09HID: switch to using input_dev->dev.parentDmitry Torokhov
In preparation for struct class_device -> struct device input core conversion switch to using input_dev->dev.parent when specifying device position in sysfs tree. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09USB HID: Logitech wheel 0x046d/0xc294 needs HID_QUIRK_NOGET quirkJan Kratochvil
Logitech wheel (product id 0xc294) doesn't like to be polled for reports, otherwise it slows down initialization of this device to ten seconds. This patch adds HID_QUIRK_NOGET flag for this wheel. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09USB HID: usb_buffer_free() cleanupDmitry Torokhov
usb_buffer_free() now handles NULLs so remove unneeded checks form callers. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09USB HID: report descriptor of Cypress USB barcode readers needs fixupJiri Kosina
Certain versions of Cypress USB barcode readers (this problem is known to happen at least with PIDs 0xde61 and 0xde64) have report descriptor which has swapped usage min and usage max tag. This results in HID parser failing for report descriptor of these devices, as it (wrongly) requires allocating more usages than HID_MAX_USAGES. Solve this by walking through the report descriptor for such devices, and swap the usage min and usage max items (and their values) to be in proper order. Reported-by: Bret Towe <magnade@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09USB HID: update CONFIG_USB_HIDINPUT_POWERBOOK descriptionNoel Kothe
This option is needed on the Apple Intel Laptops too. Signed-off-by: Noel Kothe <noel@debian.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09HID: add input mappings for non-working keys on Logitech S510 remoteCharles Pillar
HID-input mapping for non-working S510 remote control buttons. Signed-off-by: Charles Pillar <pillarama@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-30Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits) USB HID: don't warn on idVendor == 0 USB HID: add 'quirks' module parameter USB HID: add support for dynamically-created quirks USB HID: clarify static quirk handling as squirks USB HID: encapsulate quirk handling into hid-quirks.c USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT HID: update copyright and authorship macro HID: introduce proper zeroing of unused bits in output reports USB HID: add support for WiseGroup MP-8800 Quad Joypad USB HID: add FF support for Logitech Force 3D Pro Joystick USB HID: numlock quirk for dell W7658 keyboard USB HID: Logitech MX3000 keyboard needs report descriptor quirk USB HID: extend quirk for Logitech S510 keyboard USB HID: usbkbd/usbmouse - handle errors when registering devices USB HID: add QUIRK_HIDDEV for Belkin Flip KVM HID: enable dead keys on a belkin wireless keyboard USB HID: Thustmaster firestorm dual power v1 support USB HID: specify explicit size for hid_blacklist.quirks USB HID: fix retry & reset logic USB HID: consolidate vendor/product ids ...
2007-04-29Merge branch 'field-zeroing' into for-linusJiri Kosina
2007-04-29USB HID: don't warn on idVendor == 0Jiri Kosina
It turns out that there are broken devices out there that incorrectly report VID/PID as 0x000, see http://lkml.org/lkml/2007/4/27/496 Therefore we should not confuse users by dumping warnings and stacktraces in such situation. It is not possible to add quirks for such horribly broken devices, but currently that's not needed. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-04-19USB HID: add 'quirks' module parameterPaul Walmsley
Add a 'quirks' module parameter for the usbhid module, so users can add or modify quirks at module load time. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>