aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/ide-tape.c
AgeCommit message (Collapse)Author
2008-07-24ide: ide-tape.c sparse annotations and unaligned access removalHarvey Harrison
If this is actually unaligned the access of speed/max_speed above is already broken and needs a get_unaligned. Otherwise it is aligned and they can be removed. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24ide: add ide_device_{get,put}() helpersBartlomiej Zolnierkiewicz
* Add 'struct ide_host *host' field to ide_hwif_t and set it in ide_host_alloc_all(). * Add ide_device_{get,put}() helpers loosely based on SCSI's scsi_device_{get,put}() ones. * Convert IDE device drivers to use ide_device_{get,put}(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: convert to using the new atapi_flagsBorislav Petkov
There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: pass packet command in rq->cmdBorislav Petkov
Make a redundant copy of the packet command bits into rq->cmd. Later, after all drivers have been converted, it'll be switched to use that in the common code instead of pc->c. While at it, simplify ide_tape_create_rw_cmd. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: make room for packet command ids in rq->cmdBorislav Petkov
ide-tape uses rq->cmd for special commands from the chrdev interface so move those to byte 13 (BLK_MAX_CDB = 16) since a packet cmd is max 12 bytes. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: use drive->pc_callback instead of pc->callbackBorislav Petkov
The if-else block in the IRQ handler is only temporary so that bisect searches don't break and it'll be removed after converting the remainder of the drivers. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23drivers/ide/ide-tape.c: remove double kfreeDarren Jenkins
Coverity CID: 2336 USE_AFTER_FREE drivers/ide/ide-tape.c ide_tape_kfree_buffer() double free's a pointer (hint freed by an alias in first outer loop). This patch simply removes the superfluous kfree(). Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: gadio@netvision.net.il Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_tp_ops (take 2)Bartlomiej Zolnierkiewicz
* Add struct ide_tp_ops for transport methods. * Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info and ide_hwif_t. * Set the default hwif->tp_ops in ide_init_port_data(). * Set host driver specific hwif->tp_ops in ide_init_port(). * Export ide_exec_command(), ide_read_status(), ide_read_altstatus(), ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}() and ata_{in,out}put_data(). * Convert host drivers and core code to use struct ide_tp_ops. * Remove no longer needed default_hwif_transport(). * Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops. While at it: * Use struct ide_port_info in falconide.c and q40ide.c. * Rename ata_{in,out}put_data() to ide_{in,out}put_data(). v2: * Fix missing convertion in ns87415.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->read_status methodBartlomiej Zolnierkiewicz
* Remove ide_read_status() inline helper. * Add ->read_status method for reading ATA Status register and use it instead of ->INB. While at it: * Don't use HWGROUP() macro. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-21device create: ide: convert device_create to device_create_drvdataGreg Kroah-Hartman
device_create() is race-prone, so use the race-free device_create_drvdata() instead as device_create() is going away. Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-16IDE: Remove unused codeElias Oltmanns
Remove some code which has been made obsolete and hasn't worked properly before anyway. Part of the infrastructure may be reintroduced in a follow up patch to implement a working command aborting facility. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: "Alan Cox" <alan@lxorguk.ukuu.org.uk> Cc: "Randy Dunlap" <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (80 commits) ide-floppy: fix unfortunate function naming ide-tape: unify idetape_create_read/write_cmd ide: add ide_pc_intr() helper ide-{floppy,scsi}: read Status Register before stopping DMA engine ide-scsi: add more debugging to idescsi_pc_intr() ide-scsi: use pc->callback ide-floppy: add more debugging to idefloppy_pc_intr() ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled ide-tape: add ide_tape_io_buffers() helper ide-tape: factor out DSC handling from idetape_pc_intr() ide-{floppy,tape}: move checking of ->failed_pc to ->callback ide: add ide_issue_pc() helper ide: add PC_FLAG_DRQ_INTERRUPT pc flag ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc() ide: add ide_transfer_pc() helper ide-scsi: set drive->scsi flag for devices handled by the driver ide-{cd,floppy,tape}: remove checking for drive->scsi ide: add PC_FLAG_ZIP_DRIVE pc flag ide-tape: factor out waiting for good ireason from idetape_transfer_pc() ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() ...
2008-07-15ide-tape: unify idetape_create_read/write_cmdBorislav Petkov
A straightforward one. There should be no functional change resulting from this change. [bart: minor fixups] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add ide_pc_intr() helperBartlomiej Zolnierkiewicz
* ide-tape.c: add 'drive' argument to idetape_update_buffers(). * Add generic ide_pc_intr() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. * ide-tape.c: remove no longer needed DBG_PC_INTR. There should be no functional changes caused by this patch (unless the debugging is explicitely compiled in). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: always log debug info in idetape_pc_intr() if debugging is enabledBartlomiej Zolnierkiewicz
Add DBG_PC_INTR debug level and use it to always log debug info in idetape_pc_intr() if debugging is enabled. While at it: * Use drive->name instead of tape->name. * Log device name with "DMA finished" message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: add ide_tape_io_buffers() helperBartlomiej Zolnierkiewicz
* Add ide_tape_io_buffers() helper which is a wrapper for idetape_{in,out}put_buffers() and convert idetape_pc_intr() to use it. * Remove no longer used idetape_io_buf typedef. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>---
2008-07-15ide-tape: factor out DSC handling from idetape_pc_intr()Bartlomiej Zolnierkiewicz
Factor out DSC handling from idetape_pc_intr() to ide_tape_handle_dsc() helper as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: move checking of ->failed_pc to ->callbackBartlomiej Zolnierkiewicz
Move checking/resetting of ->failed_pc from ide*_pc_intr() to ->callback as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>---
2008-07-15ide: add ide_issue_pc() helperBartlomiej Zolnierkiewicz
Add generic ide_issue_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add PC_FLAG_DRQ_INTERRUPT pc flagBartlomiej Zolnierkiewicz
Add PC_FLAG_DRQ_INTERRUPT pc flag, set it in ide*_do_request() and check for it (instead of checking for IDE*_FLAG_DRQ_INTERRUPT) in ide*_issue_pc(). This is a preparation for adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add ide_transfer_pc() helperBartlomiej Zolnierkiewicz
* Add ide-atapi.c file for generic ATAPI support together with CONFIG_IDE_ATAPI config option. * Add generic ide_transfer_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{cd,floppy,tape}: remove checking for drive->scsiBartlomiej Zolnierkiewicz
Remove checking for drive->scsi which is no longer set by IDE core code (leave the flag since it will be re-used for generic ATAPI support). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: factor out waiting for good ireason from idetape_transfer_pc()Bartlomiej Zolnierkiewicz
Factor out waiting for good ireason from idetape_transfer_pc() to ide_tape_wait_ireason() as a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()Bartlomiej Zolnierkiewicz
Set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() instead of idetape_issue_pc() to match the other ATAPI device drivers. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OKBartlomiej Zolnierkiewicz
* Use PC_FLAG_DMA_OK flag instead of PC_FLAG_DMA_RECOMMENDED one. * Remove no longer used PC_FLAG_DMA_RECOMMENDED flag. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callbackBartlomiej Zolnierkiewicz
Merge pc->idefloppy_callback and pc->idetape_callback into pc->callback. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: make pc->idetape_callback voidBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: merge callbacksBartlomiej Zolnierkiewicz
The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it: - add uptodate variable + leave just one idetape_end_request() call - don't use HWGROUP() macro Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: make idetape_retry_pc() voidBartlomiej Zolnierkiewicz
idetape_retry_pc() always returns ide_stopped so make it void. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape,scsi}: log device name instead of driver nameBartlomiej Zolnierkiewicz
Log device name instead of driver name in *_pc_intr() and *_transfer_pc*(). While at it: * Merge two consecutive printk()-s in *_pc_intr() together. * Replace "floppy"/"tape"/"scsi" references in printk()-s by "device". Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove SIMULATE_ERRORS debug codeBartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove stale comments from idetape_pc_intr()Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdefBartlomiej Zolnierkiewicz
PC_FLAG_DMA_IN_PROGRESS flag is never set if DMA support is disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove superfluous warning message from idetape_issue_pc()Bartlomiej Zolnierkiewicz
ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove superfluous error message from idetape_pc_intr()Bartlomiej Zolnierkiewicz
ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq()Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove action argument in ide_do_drive_cmdFUJITA Tomonori
ide_do_drive_cmd is called only with ide_preempt action argument. So we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. This patch also includes two minor cleanups: 1) ide_do_drive_cmd always succeeds so we don't need the return value; 2) the callers use blk_rq_init before ide_do_drive_cmd so there is no need to initialize rq->errors. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flagBartlomiej Zolnierkiewicz
Always call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done to match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK taskfile flag. This change should only affect hpt366 and icside host drivers since ->maskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: convert ide_do_drive_cmd path to use blk_execute_rqFUJITA Tomonori
This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() usersBartlomiej Zolnierkiewicz
* Set REQ_PREEMPT request flag in ide_do_drive_cmd() users for ide_preempt and ide_head_wait action types. * Remove setting REQ_PREEMPT from ide_do_drive_cmd(). While at it: * Set 'where' variable outside ide_lock. This is a preparation for converting IDE to use blk_execute_rq(). There should be no functional changes caused by this patch. Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: use get_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: use clamp_t() rather than nested min_t()/max_t()Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-20ide-tape: cdev lock_kernel() pushdownJonathan Corbet
->release() already has explicit lock_kernel() calls... Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-04-29ide: use blk_rq_init() to initialize the requestFUJITA Tomonori
This converts ide to use blk_rq_init to initialize the request. This is a preparation for large command support, which needs to initialize the request in a proper way (that is, just doing a memset() will not work). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-28ide: add ide_pad_transfer() helperBartlomiej Zolnierkiewicz
* Add ide_pad_transfer() helper (which uses ->{in,out}put_data methods internally so the transfer is also padded to drive+host requirements) and use it instead of ide_atapi_{write_zeros,discard_data}(). * Remove no longer needed ide_atapi_{write_zeros,discard_data}(). Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ide_execute_pkt_cmd() helperBartlomiej Zolnierkiewicz
Add ide_execute_pkt_cmd() helper for executing PACKET command, then convert ATAPI device drivers to use it. As a nice side-effect this fixes ide-{floppy,tape,scsi} w.r.t. ide_lock taking (ide-cd was OK). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-{floppy,tape,scsi}: 400ns delay is required after executing the commandBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: always use ->OUTBSYNC method for executing commandsBartlomiej Zolnierkiewicz
Always use ->OUTBSYNC method for executing commands so the posting is done if needed (this affects only pmac and scc_pata host drivers at the moment). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: merge ->atapi_*put_bytes and ->ata_*put_data methodsBartlomiej Zolnierkiewicz
* Merge ->atapi_{in,out}put_bytes and ->ata_{in,out}put_data methods into new ->{in,out}put_data methods which take number of bytes to transfer as an argument and always do padding. While at it: * Use 'hwif' or 'drive->hwif' instead of 'HWIF(drive)'. There should be no functional changes caused by this patch (all users of ->ata_{in,out}put_data methods were using multiply-of-4 word counts). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27ide-tape: remove tape->merge_stageBorislav Petkov
Get rid of the pipeline merge stage but retain the chrdev req caching functionality by using a merge buffer tape->merge_bh which is flushed in chunks of several blocks at a time. Also, remove last references to pipelining, e.g. typedef idetape_stage_s. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-30 09:42:56 +0000