aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19ide: set drive->autotune in ide_pci_setup_ports()Bartlomiej Zolnierkiewicz
Majority of host drivers using IDE PCI layer set drive->autotune, the only exceptions are: generic.c ns87415.c rz1000.c trm290.c * no ->set_pio_mode method it821x.c: * if memory allocation fails drive->autotune won't be set (but there also won't be ->set_pio_mode method in such case) piix.c: * MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method) However if there is no ->set_pio_mode method there are no changes in behavior w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19triflex: always tune PIOBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19opti621: always tune PIOBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19cy82c693: always tune PIOBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19cs5520: always tune PIOBartlomiej Zolnierkiewicz
Since cs5520 uses VDMA best PIO mode was tuned anyway by ide_dma_check() but only if DMA was successfully initialized. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19alim15x3: always tune PIOBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_LEGACY_IRQS host flagBartlomiej Zolnierkiewicz
Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it. While at it: * In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_SERIALIZE host flagBartlomiej Zolnierkiewicz
Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flagBartlomiej Zolnierkiewicz
Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead of hwif->err_stops_fifo. As a side-effect this change fixes hwif->err_stops_fifo not being restored by ide_hwif_restore(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19piix: add DECLARE_ICH_DEV() macroBartlomiej Zolnierkiewicz
Add DECLARE_ICH_DEV() macro. While at it: * Add init_hwif_ich() (->init_hwif method) for ICH controllers. * Rename init_chipset_piix() to init_chipset_ich() and use it only for ICH controllers. * Remove no longer needed piix_is_ichx() helper. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_old: add DECLARE_PDC2026X_DEV() macroBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_new: add DECLARE_PDCNEW_DEV() macroBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19aec62xx: no need to disable UDMA in ->init_hwif method for ATP850UFBartlomiej Zolnierkiewicz
* No need to disable UDMA in ->init_hwif method for ATP850UF (and since we now always tune PIO it will be disabled by ->set_pio_mode calls anyway). * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19serverworks: remove ->init_setupBartlomiej Zolnierkiewicz
Merge init_setup_{svwks,csb6}() into svwks_init_one(). While at it: * Remove redundant dev->device checks. * Operate on a local copy of serverworks_chipsets[] entry. * Use pci_resource_start(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19scc_pata: remove ->init_setupBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_old: remove ->init_setupBartlomiej Zolnierkiewicz
* Split off pdc202ata4_fixup_irq() helper from init_setup_pdc202ata4(). * Merge init_setup_{pdc202ata4,pdc20265,pdc202xx}() into pdc202xx_init_one(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_new: remove ->init_setupBartlomiej Zolnierkiewicz
* Split off pdc20270_get_dev2() helper from init_setup_pdc20270(). * Merge init_setup_{pdcnew,pdc20270,pdc20276}() into pdc202new_init_one(). While at it: * Change KERN_ level of interrupt fixup message from KERN_WARNING to KERN_INFO. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19hpt366: remove ->init_setupBartlomiej Zolnierkiewicz
* Split off hpt{374,371,366}_init() helper from init_setup_hpt{374,371,366}(). * Merge init_setup_{374,372n,371,372a,302,366}() into hpt366_init_one(). While at it: * Use "HPT36x" name for HPT366/HPT368 chipsets. * Add .chip_name to struct hpt_info and use it to set set d->name. * Convert .max_ultra in struct hpt_info to .udma_mask and use it to set d->udma_mask. * Fix hpt302 to use HPT302_ALLOW_ATA133_6 define. * Change HPT366/HPT374 interrupt fixup message from KERN_WARNING to KERN_INFO. * Use the second hpt366_chipsets[] entry for HPT37x chipsets using HPT36x PCI device ID and fix .enablebits/.host_flags for HPT36x hpt366_chipsets[] entry. * Bump driver version. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19cmd64x: remove ->init_setupBartlomiej Zolnierkiewicz
Merge init_setup_{cmd64x,cmd646}() into cmd64x_init_one(). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19aec62xx: remove ->init_setupBartlomiej Zolnierkiewicz
Merge init_setup_{aec62xx,aec6x80}() into aec62xx_init_one(). While at it: * Use id->driver_data instead of dev->device. * Use ATA_UDMA6 define. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: use I/O ops directly part #2 (take 2)Bartlomiej Zolnierkiewicz
v2: - bump host driver versions (as suggested by Sergei) - use I/O ops directly in drivers/ide/setup-pci.c Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: use pci_dev->revisionBartlomiej Zolnierkiewicz
Some places were using PCI_CLASS_REVISION instead of PCI_REVISION_ID so they were not converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19cmd64x: Use dev->revisionAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19amd74xx: Omit PCI_REVISION_ID readAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)Bartlomiej Zolnierkiewicz
* Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t. * Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif method may still override them). * Convert IDE PCI host drivers to use ide_pci_device_t DMA masks. While at it: * Use ATA_{UDMA,MWDMA,SWDMA}* defines. * hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345. * serverworks.c: fix DMA masks being set before checking DMA base. v2: * Add missing masks to DECLARE_GENERIC_PCI_DEV() macro. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_old: remove broken SWDMA supportBartlomiej Zolnierkiewicz
Documentation doesn't mention SWDMA and moreover all timings used for SWDMA modes were over-clocked when compared to ATA spec. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flagsBartlomiej Zolnierkiewicz
Add IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif->no_lba48[_dma] and then remove no longer needed hwif->no_lba48[_dma]. As a side-effect this change fixes hwif->no_lba48_dma not being restored by ide_hwif_restore(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: remove ->init_setup_dma from ide_pci_device_t (take 2)Bartlomiej Zolnierkiewicz
* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag. * Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base() and use d->name instead of hwif->cds->name. * Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma. This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts. v2: * It is wrong to check simplex bits on CS5510/CS5520 as v1 did. (Noticed by Alan). Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flagsBartlomiej Zolnierkiewicz
Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags. Convert all host drivers using ide_pci_device_t to use these flags instead of d->autodma and then remove no longer needed d->autodma. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_BOOTABLE host flagBartlomiej Zolnierkiewicz
Add IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define. Convert all host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD} instead of d->bootable and then remove no longer needed d->bootable. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_NO_ATAPI_DMA host flagBartlomiej Zolnierkiewicz
Add IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which don't support ATAPI DMA. Then remove no longer needed hwif->atapi_dma. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driverBartlomiej Zolnierkiewicz
* Add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver and use it to cleanup generic_chipsets[]. * Remove dead/obsolete code while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19siimage: bump driver versionBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: Fix cs5535 driver accessing beyond array boundaryBenjamin Herrenschmidt
The cs5535 uses an incorrect construct to access the other drive of a pair, causing it to access beyond an array boundary on the secondary interface. This fixes it by using the new ide_get_paired_drive() helper instead. Bart: patch description fixes Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@osdl.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: Fix siimage driver accessing beyond array boundaryBenjamin Herrenschmidt
The siimage uses an incorrect construct to access the other drive of a pair, causing it to access beyond an array boundary on the secondary interface. This fixes it by using the new ide_get_paired_drive() helper instead. Bart: patch description fixes Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@osdl.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16amd74xx: remove /proc/ide/amd74xxBartlomiej Zolnierkiewicz
This belongs to user-space (and only if really needed). text data bss dec hex filename 6723 2000 28 8751 222f drivers/ide/pci/amd74xx.o.before 3833 2000 16 5849 16d9 drivers/ide/pci/amd74xx.o.after Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16amd74xx/via82cxxx: don't initialize drive->dnBartlomiej Zolnierkiewicz
drive->dn is initialized by ide-probe.c::probe_hwif() so no need to do it in ->init_hwif method. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16sis5513: remove /proc/ide/sisBartlomiej Zolnierkiewicz
This belongs to user-space (and only if really needed). text data bss dec hex filename 7129 404 8 7541 1d75 drivers/ide/pci/sis5513.o.before 3916 404 1 4321 10e1 drivers/ide/pci/sis5513.o.after Additionaly to being bloat the code contained two bugs: - wrong cable bit was checked (0x0001 instead of 0x8000) on ATA_133 chipsets - incorrect UDMA cycle time was reported on ATA_100a/ATA_133 chipsets Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove CONFIG_IDEDMA_ONLYDISKBartlomiej Zolnierkiewicz
ATAPI devices with broken DMA support should be handled by DMA blacklist and for debugging purposes we have new shiny "hdx=nodma" kernel paremeter. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: add "hdx=nodma" kernel parameterBartlomiej Zolnierkiewicz
* Add "hdx=nodma" option allowing user to disallow DMA for a given device. * Obsolete "ide=nodma" option. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove hwif->autodma and drive->autodmaBartlomiej Zolnierkiewicz
* hpt34x.c: disable DMA masks for HPT345 (hwif->autodma is zero so DMA won't be enabled anyway). * trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag (hwif->autodma is zero so DMA won't be enabled anyway). * Check noautodma global variable instead of drive->autodma in ide_tune_dma(). This fixes handling of "ide=nodma" kernel parameter for icside, ide-cris, au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers. * Remove hwif->autodma (it was not checked by IDE core code anyway) and drive->autodma (was set by all host drivers - except HPT345/TRM290 special cases - unless "ide=nodma" was used). While at it: - remove needless printk() from icside.c - remove stale FIXME/comment from ide-probe.c - don't force DMA off if PCI bus-mastering had to be enabled in setup-pci.c (this setting was always later over-ridden by host drivers anyway) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove "idex=dma" kernel parameterBartlomiej Zolnierkiewicz
It has been obsoleted since 1 Nov 2004, is valid only when used together with "ide=nodma" kernel parameter (which makes no sense) and only for aec62xx, cmd64x, cs5220, generic, hpt366, sl82c105, tc86c001 and triflex host drivers. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove CONFIG_BLK_DEV_IDEDMA_FORCEDBartlomiej Zolnierkiewicz
This code doesn't use pci_assign_resource() and ide_get_or_set_dma_base() uses pci_resource_start() to get DMA base address so it has no chance of working. Moreover this belongs to PCI quirks (in case somebody would like to fix it). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: use PCI_VDEVICE() macroBartlomiej Zolnierkiewicz
While at it: - make struct pci_device_id tables const - use PCI_DEVICE_ID_ITE_8213 define in it8213.c - fix comment in generic.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16sis5513: clear prefetch and postwrite for ATAPI devicesBartlomiej Zolnierkiewicz
Clear prefetch and postwrite for ATAPI devices instead of depending on BIOS. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16it8213/piix/slc90e66: "de-couple" PIO and UDMA modesBartlomiej Zolnierkiewicz
Don't force PIO4 when programming UDMA mode (suggested by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: unexport noautodmaAdrian Bunk
noautodma can now be unexported. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: unexport ide_tune_dmaAdrian Bunk
static code mustn't be exported. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove ->ide_dma_check (take 2)Bartlomiej Zolnierkiewicz
* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-21 18:44:38 +0000