aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2006-01-06[BLOCK] update IDE to use new blk_ordered for barriersTejun Heo
Update IDE to use new blk_ordered. This change makes the following behavior changes. * Partial completion of the barrier request is handled as failure of the whole ordered sequence. No more partial completion for barrier requests. * Any failure of pre or post flush request results in failure of the whole ordered sequence. So, successfully completed ordered sequence guarantees that all requests prior to the barrier made to physical medium and, then, the while barrier request made to the physical medium. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06[BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn()Tejun Heo
add @uptodate argument to end_that_request_last() and @error to rq_end_io_fn(). there's no generic way to pass error code to request completion function, making generic error handling of non-fs request difficult (rq->errors is driver-specific and each driver uses it differently). this patch adds @uptodate to end_that_request_last() and @error to rq_end_io_fn(). for fs requests, this doesn't really matter, so just using the same uptodate argument used in the last call to end_that_request_first() should suffice. imho, this can also help the generic command-carrying request jens is working on. Signed-off-by: tejun heo <htejun@gmail.com> Signed-Off-By: Jens Axboe <axboe@suse.de>
2006-01-06[PATCH] pcmcia: add some IDs for ide-cs and dtl1_csRichard Purdie
Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe ↵Dominik Brodowski
callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: remove dev_list from driversDominik Brodowski
The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callbackDominik Brodowski
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: new suspend coreDominik Brodowski
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-04[PATCH] ide: MODALIAS support for autoloading of ide-cd, ide-disk, ...Kay Sievers
IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ... Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and ide-tape, to autoload these modules depending on the probed media type of the IDE device. It is used by udev and replaces the former agent shell script of the hotplug package, which was required to lookup the media type in the proc filesystem. Using proc was racy, cause the media file is created after the hotplug event is sent out. The module autoloading does not take any effect, until something like the following udev rule is configured: SUBSYSTEM=="ide", ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" The module ide-scsi will not be autoloaded, cause it requires manual configuration. It can't be, and never was supported for automatic setup in the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported media types, would just lead to a default blacklist entry anyway. $ modinfo ide-disk filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko description: ATA DISK Driver alias: ide:*m-disk* license: GPL ... $ modprobe -vn ide:m-disk insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko $ cat /sys/bus/ide/devices/0.0/modalias ide:m-disk It also adds attributes to the IDE device: $ tree /sys/bus/ide/devices/0.0/ /sys/bus/ide/devices/0.0/ |-- bus -> ../../../../../../../bus/ide |-- drivename |-- media |-- modalias |-- power | |-- state | `-- wakeup `-- uevent $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media} ide:m-disk hda disk Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-15[PATCH] ide-cd: remove write-only cmd field from struct cdrom_infoBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] ide-disk: flush cache after calling del_gendisk()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] ide: AU1200 IDE updateJordan Crouse
Changes here include removing all of CONFIG_PM while it is being repeatedly smacked with a lead pipe, moving the BURSTMODE param to a #define (it should be defined almost always anyway), fixing the rqsize stuff, pulling ide_ioreg_t, and general cleanups and whatnot. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] ide: core modifications for AU1200Jordan Crouse
bart: slightly modified by me Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] ide: MPC8xx IDE depends on IDE=y && BLK_DEV_IDE=yMarcelo Tosatti
The following patch adds a dependancy on IDE=y && BLK_DEV_IDE=y for the MPC8xx IDE driver. The code is not modular at the moment (init called from platform setup code). Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] via82cxxx IDE: Add VT8251 ISA bridgeDaniel Drake
Some motherboards (such as the Asus P5V800-MX) ship a PCI_DEVICE_ID_VIA_82C586_1 IDE controller alongside a VT8251 southbridge. This southbridge is currently unrecognised in the via82cxxx IDE driver, preventing those users from getting DMA access to disks. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] sgiioc4: check for no hwifs availableJeremy Higdon
Add a check to the sgiioc4 driver for the case where all available ide_hwifs structures are in use. Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-19[PATCH] ide: add missing __init tags to device driversBartlomiej Zolnierkiewicz
Also remove bogus comments for idefloppy_init() and idetape_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-19[PATCH] ide: remove dead code from flagged_taskfile()Bartlomiej Zolnierkiewicz
flagged_taskfile() is called from execute_drive_cmd() (the only user) only if args->tf_out_flags.all != 0. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-19[PATCH] ide: remove dead DEBUG_TASKFILE codeBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-19[PATCH] ide: remove unused ide_action_t:ide_nextBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-19[PATCH] sis5513: enable ATA133 for the SiS965 southbridgeAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-19[PATCH] via82cxxx: add VIA VT6410 IDE supportMathias Kretschmer
From: Mathias Kretschmer <posting@blx4.net> Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
2005-11-18[PATCH] ide: fix ide_toggle_bounce() to not try to bounce if we have an IOMMUJames Bottomley
The following patch fixes a crash caused by attempting to bounce buffer when an IDE CD-ROM is used on a machine with an IO-MMU. [At least, this patch fixes things so I can use my IDE CD-ROM behind an ns87415 on a HP PA-RISC workstation.] Signed-off-by: James Bottomley <jejb@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] ide: make comment match realityRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] cs5520: fix return value of cs5520_init_one()Amit Gud
From: Amit Gud <amitg@calsoftinc.com> Patch follows from the suggestions by AC and Felipe W Damasio for fixing the return codes from IDE drivers. [ bart: fix coding style while at it ] Signed-off-by: Amit Gud <gud@eth.net> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] siimage: docs urlsJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] aec62xxx: remove all dead (#if0'd) codeThibaut VARENE
Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] pmac IDE: don't release empty interfacesThibaut VARENE
From: Thibaut VARENE <T-Bone@parisc-linux.org> Cleaning up the hwif without knowing its previous state in pmac.c is a big and potentially dangerous job, and there seems to be no generic code interface that would provide either a way to properly release an hwif or to clean it up. Fixes OOPS for empty PMAC interface and add-on PCI controller. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] alim15x3: use KERN_WARNINGAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] alim15x3: replace pci_find_device() with pci_dev_present()Hanna Linder
From: Hanna Linder <hannal@us.ibm.com> The dev returned from pci_find_device() was not used so it can be replaced with pci_dev_present(). Compile tested. Signed-off-by: Hanna Linder <hannal@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PARISC] Mention PA-RISC in NS87415 helpMatthew Wilcox
Mention PA-RISC in NS87415 help. PA-RISC [BCJ]xxx0 workstations come with NS87415 integrated for their CD-ROM drives. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-18[PATCH] ide: remove ide_driver_t.owner fieldLaurent Riffard
The structure ide_driver_t have a .owner field which is a duplicate of .gendriver.owner field (.gen_driver is a struct device_driver). This patch removes ide_driver_t's owner field. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] via82cxxx IDE: support multiple controllersDaniel Drake
Support multiple controllers in the via82cxxx IDE driver. Cable detection and ISA bridge finding have been moved into their own functions. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] via82cxxx IDE: remove /proc/via entryDaniel Drake
This entry adds needless complication to the driver as it requires the use of global variables to be passed into via_get_info(), making things quite ugly when we try and make this driver support multiple controllers simultaneously. This patch removes /proc/via for simplicity. On 10/13/05, Daniel Drake <dsd@gentoo.org> wrote: > Per Bart's suggestion, I've created a user-space app which shows identical > data (and doesn't even rely on the via82cxxx IDE driver). > > http://www.reactivated.net/software/viaideinfo/ > > So, I think we should be clear to drop /proc/ide/via now. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-17[IDE] Add driver for Sibyte Swarm evaluation boardRalf Baechle
This driver supports the IDE port on the Sibyte Swarm evaluation boards and it's relatives for the BCM1250 family of systems on a chip. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-11-13[PATCH] ppc: add support for new powerbooksOlof Johansson
Enablement patch for the new PowerBooks (late 2005 edition). This enables the ATA controller, Gigabit ethernet and basic AGP setup. Bluetooth works out-of-the box after running hid2hci. Still remaining is to get the touchpad to work, the simple change of just adding the new USB ids isn't enough. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-12[ARM] Ensure sl82c105 IDE interfaces are serialized when using DMARussell King
We don't want to reset the DMA state machine while the other channel is in use. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[ARM] Fix broken sl82c105 DMA preventionRussell King
We must _never_ _ever_ on pain of death enable IDE DMA on SL82C105 chipsets where the southbridge revision is <= 5, otherwise data corruption will occur. Strangely this used to work, but something has changed in the upper echelons of the IDE layer to break the hosts decision to deny DMA. Let's make it crystal clear to the IDE layer that we know best. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[PATCH] PCI: automatically set device_driver.ownerLaurent riffard
A nice feature of sysfs is that it can create the symlink from the driver to the module that is contained in it. It requires that the device_driver.owner is set, what is not the case for many PCI drivers. This patch allows pci_register_driver to set automatically the device_driver.owner for any PCI driver. Credits to Al Viro who suggested the method. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> -- drivers/ide/setup-pci.c | 12 +++++++----- drivers/pci/pci-driver.c | 9 +++++---- include/linux/ide.h | 3 ++- include/linux/pci.h | 10 ++++++++-- 4 files changed, 22 insertions(+), 12 deletions(-)
2005-11-10[PATCH] ide-floppy: software eject not working with LS-120 driveOndrej Zary
The problem (eject not working on ATAPI LS-120 drive) is caused by idefloppy_ioctl() function which *first* tries generic_ide_ioctl() and *only* if it fails with -EINVAL, proceeds with the specific ioctls. The generic eject command fails with something other than -EINVAL and the specific one is never executed. This patch fixes it by first going through the internal ioctls and only trying generic_ide_ioctl() if none of them matches. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-10[PATCH] siimage: enable interrupts on Adaptec SA-1210 cardJohn W. Linville
The siimage driver proports to support the Adaptec SA-1210 SATA controller. However, at least some of those cards boot-up with their interrupts disabled internally. The siimage driver currently ignores that fact, so that driver does not actually work with those cards. This patch enables those interrupts on cards that need it. [ This is implemented based on similar code in the libata-based sata_sil driver. ] Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: CS5535 driverJaya Kumar
Signed-off-by: Jaya Kumar <jayakumar.ide@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: AMD Geode GX/LX supportJordan Crouse
From: "Jordan Crouse" <jordan.crouse@amd.com> The core IDE engine on the CS5536 is the same as the other AMD southbridges, so unlike the CS5535, we can simply add the appropriate PCI headers to the existing amd74xx code. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - pci/cy82c693.c: make a needlessly global function static - remove the following unneeded EXPORT_SYMBOL's: - ide-taskfile.c: do_rw_taskfile - ide-iops.c: default_hwif_iops - ide-iops.c: default_hwif_transport - ide-iops.c: wait_for_ready Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: incorrect device link for ide-csHannes Reinecke
Devices driven by ide-cs will appear under /sys/devices instead of the appropriate PCMCIA device. To fix this I had to extend the hw_regs_t structure with a 'struct device' field, which allows us to set the parent link for the appropriate hwif. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@suse.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-08[PATCH] ppc: Fix PowerBook HD led on ARCH=powerpcBenjamin Herrenschmidt
The PowerBook HD led code uses obsoletes device-tree accessors which do not work anymore for getting the root of the tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07[PATCH] kfree cleanup: misc remaining driversJesper Juhl
This is the remaining misc drivers/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in misc files in drivers/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <len.brown@intel.com> Acked-by: "Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ide: kmalloc + memset -> kzalloc conversionDeepak Saxena
Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge ../linux-2.6 by handPaul Mackerras
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 12:33:28 +0000