aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2007-02-07PCI: add the sysfs driver name to all modulesGreg Kroah-Hartman
This adds the module name to all PCI drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ It also fixes up the IDE core, which was calling __pci_register_driver() directly. Cc: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-01[PATCH] via82cxxx: fix typo ("cx7000" should be corrected to "cx700")Bartlomiej Zolnierkiewicz
Noticed by JosephChan@via.com.tw. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-01[PATCH] ide section fixesAl Viro
a) cleanup_module() should be __exit b) externs should match reality Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-30[PATCH] jmicron: 40/80pin primary detectionethanhsiao@jmicron.com
jmicron module detects all JMB36x as JMB361 and PATA0 has wrong pin status of XICBLID. Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-27via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support ↵Josepch Chan
for CX700 and 8237S This patch: * Corrects the wrong device ID of PCI_DEVICE_ID_VIA_SATA_EIDE from 0x0581 to 0x5324. * Adds VIA CX700 and VT8237S support in drivers/ide/pci/via82cxxx.c * Adds VIA VT8237S support in drivers/ata/pata_via.c Signed-off-by: Josepch Chan <josephchan@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27ide: unregister idepnp driver on unloadTejun Heo
idepnp driver is registered as a pnp driver on ide init but doesn't get unregistered on ide unload causing driver list corruption and eventually oops. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27ide: add missing __init tags to IDE PCI host driversBartlomiej Zolnierkiewicz
also change __devinit tag for sgiioc4.c:ioc4_ide_init() to __init Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27ide/generic: Jmicron has its own drivers nowAlan Cox
Drop ide-generic support for Jmicron identifiers as we now trust Jmicron.c for this with drivers/ide. The code check remains for the all-generic-ide case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27atiixp.c: add cable detection support for ATI IDEConke Hu
IDE HDD does not work if it uses a 40-pin PATA cable on ATI chipset. This patch fixes the bug. Signed-off-by: Conke Hu <conke.hu@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27atiixp.c: sb600 ide only has one channelConke Hu
AMD/ATI SB600 IDE/PATA controller only has one channel. Signed-off-by: Conke Hu <conke.hu@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27atiixp.c: remove unused codeConke Hu
A previous patch to atiixp.c was removed but some code has not been cleaned. Now we remove these code sine they are no use any longer. Signed-off-by: Conke Hu <conke.hu@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27jmicron: fix warningAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-05[PATCH] atiixp: Old drivers/ide layer driver for the ATIIXP hang fixAlan
When the old IDE layer calls into methods in the driver during error handling it is essentially random whether ide_lock is already held. This causes a deadlock in the atiixp driver which also uses ide_lock internally for locking. Switch to a private lock instead. [akpm@osl.org: cleanup] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] via82cxxx: fix cable detectionBartlomiej Zolnierkiewicz
This patch fixes 2.6.15 regression, is straightforward and tested. Cable detection got broken probably while converting the driver to support multiple controllers. Cable detection is done by examining how BIOS configured the attached devices. The current code is broken in that it examines the status *after* modifying Clk66 configuration ending up detecting 40c cables as 80c. This patch fixes it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] PIIX/SLC90E66: PIO mode fallback fixSergei Shtylyov
The fallback to PIO mode in the hwif->dma_check() handler doesn't work in the Intel PIIX and SMsC SLC90E66 IDE drivers because: - config_drive_for_dma() calls the hwif->speedproc() handler with a wrong mode number (unbiased by XFER_PIO_0) in case of the PIO fallback; - hwif->tuneproc() handler doesn't really set the drive's own speed (this is not fixed as yet). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] PIIX: remove check for broken MW DMA mode 0Sergei Shtylyov
There's no need to check in piix_config_drive_for_dma() for broken MW DMA mode 0 as this mode is not supported by the driver (it sets hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed(). (Alan sayeth "Probably right but if not you've got a subtle corruptor. Should at least stick a BUG_ON mode 0 setting right close when the mode is set.") Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-20PCI: ATI sb600 sata quirkConke Hu
Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] HPT37x: read f_CNT saved by BIOS from portSergei Shtylyov
The undocumented register BIOS uses for saving f_CNT seems to only be mapped to I/O space while all the other HPT3xx regs are dual-mapped. Looks like another HighPoint's dirty trick. With this patch, the deadly kernel oops on the cards having the modern HighPoint BIOSes is now at last gone! Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: HPT3xx: fix PCI clock detectionSergei Shtylyov
Use the f_CNT value saved by the HighPoint BIOS if available as reading it directly would give us a wrong PCI frequency after DPLL has already been calibrated by BIOS. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix the case of multiple HPT3xx chips presentSergei Shtylyov
init_chipset_hpt366() modifies some fields of the ide_pci_device_t structure depending on the chip's revision, so pass it a copy of the structure to avoid issues when multiple different chips are present. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix HPT3xx hotswap supportSergei Shtylyov
Fix the broken hotswap code: on HPT37x it caused RESET- to glitch when tristating the bus (the MISC control 3/6 and soft control 2 need to be written to in the certain order), and for HPT36x the obsolete HDIO_TRISTATE_HWIF ioctl() handler was called instead which treated the state argument wrong. Also, get rid of the soft control reg. 1 wtite to enable IDE interrupt -- this is done in init_hpt37x() already... Have been tested on HPT370 and 371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: optimize HPT37x timing tablesSergei Shtylyov
Save some space on the timing tables by introducing the separate transfer mode table in which the mode lookup is done to get the index into the timing table itself. Get rid of the rest of the obsolete/duplicate tables and use one set of tables for the whole HPT37x chip family like the HighPoint open-source drivers do. Documnent the different timing register layout for the HPT36x chip family (this is my guesswork based on the timing values). Have been tested and works fine on HPT370/302/371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix HPT37x timing tablesSergei Shtylyov
Fix/remove bad/unused timing tables: HPT370/A 66 MHz tables weren't really needed (the chips are not UltraATA/133 capable and shouldn't support 66 MHz PCI) and had many modes over- and underclocked, HPT372 33 MHz table was in fact for 66 MHz and 50 MHz table missed UltraDMA mode 6, HPT374 33 MHz table was really for 50 MHz... (Actually, HPT370/A 33 MHz tables also have issues. e.g. HPT370 has PIO modes 0/1 overlocked.) There's also no need in the separate HPT374 tables because HPT372 timings should be the same (and those tables has UltraDMA mode 6 which HPT374 supports depending on HPT374_ALLOW_ATA133_6 #define)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: HPT3xxN clocking fixesSergei Shtylyov
Fix serious problems with the HPT372N clock turnaround code: - the wrong ports were written to when called for the secondary channel; - it didn't serialize access to the channels; - turnaround shou;dn't be done on 66 MHz PCI; - caching the clock mode per-channel caused it to get out of sync with the actual register value. Additionally, avoid calibrating PLL twice (for each channel) as the second try results in a wrong PCI frequency and thus in the wrong timings. Make the driver deal with HPT302N and HPT371N correctly -- the clocking and (seemingly) a need for clock tunaround is the same as for HPT372N. HPT371/N chips have only one, secondary channel, so avoid touching their "pure virtual" primary channel, and disable it if the BIOS haven't done this already. Also, while at it, disable UltraATA/133 for HPT372 by default -- 50 MHz DPLL clock don't allow for this speed anyway. And remove the traces of the former bad patch that wasn't even applicable to this version of driver. Has been tested on HPT370/371N, unfortunately I don't have an instant access to the other chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12[PATCH] remove blk_queue_activity_fnBoaz Harrosh
While working on bidi support at struct request level I have found that blk_queue_activity_fn is actually never used. The only user is in ide-probe.c with this code: /* enable led activity for disk drives only */ if (drive->media == ide_disk && hwif->led_act) blk_queue_activity_fn(q, hwif->led_act, drive); And led_act is never initialized anywhere. (Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18) Unless it is all for future use off course. (this patch is against linux-2.6-block.git as off 2006/12/4) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-10[PATCH] ide-cd: Handle strange interrupt on the Intel ESB2Alan Cox
The ESB2 appears to emit spurious DMA interrupts when configured for native mode and handling ATAPI devices. Stratus were able to pin this bug down and produce a patch. This is a rework which applies the fixup only to the ESB2 (for now). We can apply it to other chips later if the same problem is found. This code has been tested and confirmed to fix the problem on the tested systems. Signed-off-by: Alan Cox <alan@redhat.com> (Most of the hard work done by Stratus however) Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] pdc202xx_new: fix PLL/timing issuesSergei Shtylyov
Fix the CRC errors in the higher UltraDMA modes with the Promise PDC20268 and newer chips that always occur on non-x86 machines and when there are more than 2 adapters on x86 machines. Fix the overclocking issue for PDC20269 and newer chips that occurs when an UltraDMA/133 capable drive is connected. Here's the summary of changes: - add code to detect the PLL input clock detection and setup it output clock, remove the PowerMac hacks; - replace the macros accessing the indexed regiters with functions, switch to using them where appropriate, gather the PIO/MWDMA/UDMA timings into tables; - rewrite the speedproc() handler to set the drive's transfer mode first, and then override the timing registers set by hardware on UltraDMA/133 chips; - use better criterion for determining higher UltraDMA modes, and add comment concerning the doubtful value of the code enabling IORDY/prefetch; - replace the stupid 'pdcnew_new_' prefixes with mere 'pdcnew_'; - get rid of unneded spaces, parens and type casts, clean up some printk's, add some new lines here and there... This work is loosely based on these former patches by Albert Lee: [1] http://marc.theaimsgroup.com/?l=linux-ide&m=110992442032300 [2] http://marc.theaimsgroup.com/?l=linux-ide&m=110992457729382 [3] http://marc.theaimsgroup.com/?l=linux-ide&m=110992474205555 [4] http://marc.theaimsgroup.com/?l=linux-ide&m=111019224802939 Some PLL clock detection code was backported from his pata_pdc2027x driver... This code has been successfully tested by me on PDC2026[89] chips. I tried to keep this rework as several patches but it made no sense: [2] was largely a modification of the non-working timing override code, [3] by itself extended the overclocking issue to the case of non-UltraDMA/133 drives, and finally, the cleanup patch based on [1] ended up rejected... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Albert Lee <albertcc@tw.ibm.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] ide: complete switch to pci_getAlan Cox
The reverse get function allows the final piece of the switching for the old IDE layer Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] sl82c105: straighten up IDE control/status register cachingSergei Shtylyov
Straighten up the IDE control/status register caching -- you *really* can't cache the shared register per-channel and hope that it won't get out ouf sync. Set the PIO fallback mode to PIO0 for the slave drive as well as master -- there was no point in having them different (most probably a resutl of typo). Do a bit of reformat and cleanup while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] pdc202xx_new: fix PIO mode setupSergei Shtylyov
Fix pdcnew_tune_drive() to always set the PIO mode requested, not pick the best possible one, change pdcnew_config_drive_xfer_rate() accordingly, and get rid of the duplicate tuneproc() call in config_chipset_for_dma(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] ide: more conversion to pci_get APIsAlan Cox
This completes IDE except for one use which requires a new core PCI function and will be polished up at the end Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] winbond IDE depends on IDEDMAOlaf Hering
winbond ide depends on idedma. Move the option into the IDEDMA section. drivers/built-in.o: In function `.sl82c105_ide_dma_timeout': sl82c105.c:(.text+0x624d0): undefined reference to `.__ide_dma_timeout' drivers/built-in.o: In function `.sl82c105_ide_dma_off_quietly': sl82c105.c:(.text+0x6274c): undefined reference to `.__ide_dma_off_quietly' drivers/built-in.o: In function `.sl82c105_ide_dma_on': sl82c105.c:(.text+0x6284c): undefined reference to `.__ide_dma_on' drivers/built-in.o: In function `.sl82c105_check_drive': sl82c105.c:(.text+0x628ec): undefined reference to `.__ide_dma_bad_drive' sl82c105.c:(.text+0x62934): undefined reference to `.__ide_dma_good_drive' drivers/built-in.o: In function `.sl82c105_ide_dma_start': sl82c105.c:(.text+0x62c24): undefined reference to `.ide_dma_start' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] lockdep: fix ide/proc interactionPeter Zijlstra
rmmod/3080 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (proc_subdir_lock){--..}, at: [<c04a33b0>] remove_proc_entry+0x40/0x191 and this task is already holding: (ide_lock){++..}, at: [<c05651a2>] ide_unregister_subdriver+0x39/0xc8 which would create a new lock dependency: (ide_lock){++..} -> (proc_subdir_lock){--..} but this new dependency connects a hard-irq-safe lock: (ide_lock){++..} ... which became hard-irq-safe at: [<c043c458>] lock_acquire+0x4b/0x6b [<c06129d7>] _spin_lock_irqsave+0x22/0x32 [<c0567870>] ide_intr+0x17/0x1a9 [<c044eb31>] handle_IRQ_event+0x20/0x4d [<c044ebf2>] __do_IRQ+0x94/0xef [<c0406771>] do_IRQ+0x9e/0xbd to a hard-irq-unsafe lock: (proc_subdir_lock){--..} ... which became hard-irq-unsafe at: ... [<c043c458>] lock_acquire+0x4b/0x6b [<c06126ab>] _spin_lock+0x19/0x28 [<c04a32f2>] xlate_proc_name+0x1b/0x99 [<c04a3547>] proc_create+0x46/0xdf [<c04a3642>] create_proc_entry+0x62/0xa5 [<c07c1972>] proc_misc_init+0x1c/0x1d2 [<c07c1844>] proc_root_init+0x4c/0xe9 [<c07ad703>] start_kernel+0x294/0x3b3 Move ide_remove_proc_entries() out from under ide_lock; there is nothing that indicates that this is needed. In specific, the call to ide_add_proc_entries() is unprotected, and there is nothing else in the file using the respective ->proc fields. Also the lock order around destroy_proc_ide_interface() suggests this. Alan sayeth: proc_ide_write_settings walks the setting list under ide_setting_sem, read ditto. remove_proc_entry is doing proc side housekeeping. Looks fine to me, although that old code is such a mess anything could be going on. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] via82cxxx: handle error condition properlyAlan Cox
Jeff noted that the via driver returned an error to an unsigned int in a a case where errors are not permitted. Move the check down earlier so we can handle it properly. Not as pretty but it works this way and avoids hacking up ugly stuff in the legacy ide core. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-05Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: [PATCH] pcmcia: at91_cf update [PATCH] pcmcia: fix m32r_cfc.c compilation [PATCH] pcmcia: ds.c debug enhancements [PATCH] pcmcia: at91_cf update [PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation [PATCH] pcmcia: remove prod_id indirection [PATCH] pcmcia: remove manf_id and card_id indirection [PATCH] pcmcia: IDs for Elan serial PCMCIA devcies [PATCH] pcmcia: allow for four multifunction subdevices [PATCH] pcmcia: handle __copy_from_user() return value in ioctl [PATCH] pcmcia: multifunction card handling fixes [PATCH] pcmcia: allow shared IRQs on pd6729 sockets [PATCH] pcmcia: start over after CIS override [PATCH] cm4000_cs: fix return value check [PATCH] pcmcia: yet another IDE ID [PATCH] pcmcia: Add an id to ide-cs.c
2006-12-04[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidationDominik Brodowski
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk <bunk@stusta.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: remove manf_id and card_id indirectionDominik Brodowski
As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: yet another IDE IDMarcin Juszkiewicz
Microdrive reported by one of OpenEmbedded developers. product info: "WEIDA", "TWTTI", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) (equivalent update to pata_pcmcia.c by Dominik Brodowski) Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04[PATCH] pcmcia: Add an id to ide-cs.cMatt Reimer
Add an ID entry for: product info: "TRANSCEND", "TS1GCF80", "", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-04Merge branch 'linux-2.6' into for-linusPaul Mackerras
2006-11-30Fix misc .c/.h comment typosMatt LaPlante
Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25[PATCH] sgiioc4: Disable module unloadJeremy Higdon
This patch removes a module_exit function that sgiioc4 should not have had. It seems that the IDE layer doesn't support submodule unloading. sgiioc4 was the only driver in drivers/ide/pci that had an exit function. After an unload, the devices would stay around and the next attempt to reference would crash... Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Acked-by: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] drivers/ide: stray bracketNicolas Kaiser
Stray bracket in debug code. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] ide-cd: only set rq->errors SCSI style for block pc requestsJens Axboe
We should only set ->errors to CHECK_CONDITION and so on for requests that use this field in the SCSI manner. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] Remove inclusion of asm/processor.h in via82cxxx.cSascha Hauer
There is some PPC_CHRP specific code in drivers/ide/pci/via82cxxx.c, so #ifdef on CONFIG_PPC_CHRP instead of CONFIG_PPC_MULTIPLATFORM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-03[PATCH] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.cPeer Chen
Add support for PATA controllers of MCP67 to amd74xx.c. Signed-off-by: Peer Chen <pchen@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-30[PATCH] drivers/ide/pci/generic.c: add missing newline to the ↵Sergey Vlasov
all-generic-ide message Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] JMB 368 PATA detectionAlan Cox
The Jmicron JMB368 is PATA only so has the PATA on function zero. Don't therefore skip function zero on this device when probing Signed-off-by: Alan Cox <alan@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 15:35:22 +0000