aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2007-07-09drivers/ide/ide-dma.c: unexport ide_set_dmaAdrian Bunk
ide_set_dma no longer has any modular user. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09via82cxxx: backport short cables support from pata_via.cBartlomiej Zolnierkiewicz
Backport short cables support from pata_via.c. This patch should allow UDMA > 2 modes on Acer Ferrari 3400. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09sis5513: backport short cables support from pata_sis.cBartlomiej Zolnierkiewicz
Backport short cables support from pata_sis.c. This patch allows UDMA > 2 modes on ASUS A6K. Thanks to testing this patch goes out to Jiri Stavinoha. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09alim15x3: backport short cables support from pata_ali.cBartlomiej Zolnierkiewicz
Backport short cables support from pata_ali.c and while at it cleanup existing cable detection code. This patch should allow UDMA > 2 modes on HP Pavilion N5430 and Fujitsu P2000. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09piix: backport short cables support from ata_piix.cBartlomiej Zolnierkiewicz
Backport short cables support from ata_piix.c. This patch should allow UDMA > 2 modes on: - Acer 5602WLMi - Acer 3682WLMi - Asus W5F - Acer Aspire 2023WLMi Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09ide: add short cables supportBartlomiej Zolnierkiewicz
This patch allows users to override both host and device side cable detection with "ideX=ata66" kernel parameter. Thanks to this it should be now possible to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable instead of 80-pin one. Next patches add automatic detection of some systems using short cables. Changes: * Rename hwif->udma_four to hwif->cbl and make it u8. * Convert all existing users accordingly (use ATA_CBL_* defines while at it). * Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three(). * Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09ide: convert ide_find_best_mode() users to use ide_max_dma_mode()Bartlomiej Zolnierkiewicz
ide-timing.h: * remove handling of DMA modes from ide_find_best_mode() and rename it to ide_find_best_pio_mode() * drop no longer needed "map" argument from ide_find_best_pio_mode() and delete needless ->id check * remove no longer needed XFER_SWDMA and XFER_UDMA* defines au1xxx-ide.c: * use ide_max_dma_mode() instead of ide_find_best_mode() * remove needless CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA #ifdef amd74xx.c: * store UDMA masks in amd_ide_chip[] and while at it make "base" field to be u8 instead of unsigned long * convert the driver to use UDMA masks from amd_ide_chip[] * use ide_max_dma_mode() and ide_find_best_pio_mode() instead of ide_find_best_mode() * delete stale comment from amd74xx_ide_dma_check() * remove no longer needed AMD_UDMA* defines via82cxxx.c: * remove unused DISPLAY_VIA_TIMINGS define * store UDMA masks in via_isa_bridges[] and while at it make "flags" field to be u8 instead of u16 * convert the driver to use UDMA masks from via_isa_bridges[] * use ide_max_dma_mode() and ide_find_best_pio_mode() instead of ide_find_best_mode() * remove no longer needed VIA_UDMA* defines pmac.c: * use ide_max_dma_mode() instead of ide_find_best_mode() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09ide: fix pre-EIDE SWDMA supportBartlomiej Zolnierkiewicz
If the word 62 is not defined use the word 52 to get SWDMA mask in ide_get_mode_mask(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09drivers/ide/legacy/hd.c: Array size calculation using sizeof replaced with ↵Andi Drebes
ARRAY_SIZE This patch replaces an array size calculation in drivers/ide/legacy/hd.c that was done using sizeof with the ARRAY_SIZE macro. Tested by compilation on an i386 box using "allyesconfig". Diffed against Linus' git-tree. Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: remove content related to dead CONFIG_BLK_DEV_MAC_MEDIABAY config variableRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: remove references to the non-existent CONFIG_SCSI_EATA_DMARobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide-cd: replace C code with call to ARRAY_SIZE() macroRobert P. J. Day
Delete the unnecessary macro ARY_LEN and use ARRAY_SIZE directly. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide_in_drive_list(): "ALL" is not a wildcard anymoreJunio C Hamano
This removes the support to treat "ALL" as a wildcard for firmware revision. This is made a separate patch, as it will break out-of-tree ide drivers that feed its own table that uses "ALL" as the wildcard to ide_in_drive_list(). Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide_in_drive_list(): accept NULL as the wildcard for firmware revisionJunio C Hamano
Earlier, the matching of (model,rev) in ide-dma black/white list handling was to consider "ALL" in the table to match any revision. This makes NULL to be also an accepted wildcard, and changes the entries of tables in ide-dma.c to use NULL. The code still accepts "ALL" as the wildcard, in order to keep any out-of-tree ide driver that feeds its own table that uses "ALL" as the wildcard to ide_in_drive_list() function from breaking. Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09aec62xx: kill speedproc() method wrapper (take 2)Sergei Shtylyov
There's no reason to have the speedproc() method wrapper for the two quite different chip families, so just get rid of it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: use mutex instead of ide_setting_sem semaphore in IDE driverMatthias Kaehlcke
The IDE driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --
2007-07-09aec62xx: remove init_dma() method (take 2)Sergei Shtylyov
Get rid of the init_dma() method (which had no particular reason to exist) by folding it into the init_hwif() method. While at it, also perform some cleanup in the latter method: - get rid of the useless clearing of hwif->autodma; - fold the serialization code into one 'if' statement; - fold setting the drives' 'autotune' and 'autodma' fields into the single statements... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09aec62xx: rework init_setup_aec6x80()Sergei Shtylyov
Rework init_setup_aec6x80() so that it won't rewrite the constant name strings anymore -- in order to do this: - in aec62xx_init_one(), pass a local copy of 'struct pci_device_id' down the call chain; - change the names for in aec62xx_chipsets[] to default to AEC-6280[R]; - override the 'name' field in init_setup_aec6x80() only if bit 4 of the DMA status register is set. While at it, also change the 'udma_mask' field for AEC-6x80R chips in this function and remove the code doing the same from the init_hwif() method... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09cmd64x: init. code cleanupSergei Shtylyov
Fix two minor issues with PCI0646 chip reporting in the init_chipset() method: "IRQ workaround enabled" message printed out not only for revision 0x01 and "CMD646: chipset revision" printed twice (by IDE core and the driver itself). Also, remove empty/pointless switch cases for the chips other than PCI0646, duplicate write to the MRDMODE register when enabling interrupts and MEMORY READ LINE cycles, and needless/misplaced initialization of the timing registers in this method. Switch to reading only the PCI revision ID register itself, not the whole 32 bits at its address in init_chipset() and init_hwif() methods; in addition, get rid of the useless clearing of hwif->autodma and perform some cosmetic style changes in the latter method. Refactor ata66_cmd64x() by moving all the code into the 'switch' statement, renaming/adding variables, and fixing the coding style. While at it, finally get rid of the meaningless aliasing register #define's... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09hpt366: simplify UltraDMA filtering (take 4)Sergei Shtylyov
Simplify UltraDMA mode filtering in the driver: - make use of the newly introduced 'udma_mask' field of 'ide_pci_device_t' to set the correct hwif->ultra_mask, modifying init_setup_hpt366() to select the correct mask based on the chip revision; - replace 'max_mode' field of the 'struct hpt_info' with 'max_ultra' specifying the maximum UltraDMA mode allowed; - rewrite hpt3xx_udma_filter() to differ the filters based on the 'chip_type' field, and only use it for HPT366 and HPT370[A] where it's really necessary. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: use mutex instead of ide_cfg_sem semaphore in IDE driverMatthias Kaehlcke
The IDE driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: make void and rename ide_dma_timeout() methodSergei Shtylyov
Since ide_dma_timeout() method's result is discarded, make it return 'void'. While at it, drop 'ide_' from the method's name, drop the '__' prefix from the default method's name, and do some cleanups in this method driver-wise: - in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use 'hwif' variable; - in au1xxx-ide.c, get rid of commented out printk(); - in sl82c105.c, get rid of unnecessary variables. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: make void and rename ide_dma_lostirq() methodSergei Shtylyov
Since ide_dma_lostirq() method's result is discarded, make it return 'void'. While at it, rename the method to dma_lost_irq(), drop the '__' prefix from the default method's name, and do some cleanups in this method driver-wise: - in aec62xx.c, rename the method in accordance with other drivers, and get rid of unnecessary variables there; - in pdc202xx_old.c, define/use 'hwif' variable; - in sgiioc4.c, rearrange the code to call the resetproc() method directly. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09serverworks: always tune CSB6Bartlomiej Zolnierkiewicz
Switch the driver to always program DMA/PIO timings and set device transfer mode instead of trusting BIOS on CSB6 controllers (libata pata_serverworks.c driver is also doing things this way and there were no problems reported so far). While doing conversion I noticed that the old code had many issues: * the code was assuming that hwif->dma_status is always valid (which obviously isn't true if hwif->dma_base == NULL) * value of "(ultra_timing >> (4*unit)) & ~(0xF0)" expression wasn't checked to fit into udma_modes[5] * code validating DMA timings didn't validate corresponding PIO timings * extra CSB5 PIO register wasn't validated et all * hwif->ide_dma_off_quietly() is always called before ide_set_dma() (which in turn calls hwif->speedproc() method - svwks_tune_chipset() in this case) so the code depending on DMA capable bit of DMA status to be set was never executed (=> the code was never validating DMA timings despite actually enabling DMA if the PIO timings were OK!) * on resume driver dependend entirely on BIOS to restore timings and set transfer mode on the device While at it: There is no need to read PIO/MWDMA timings now so don't do it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2007-07-08qd65xx: fix PIO mode selectionBartlomiej Zolnierkiewicz
PIO4 is a maximum PIO mode supported by a driver. Using "255" as a max_mode argument to ide_get_best_pio_mode() could result in wrong timings being used by a driver (for "pio" equal to 5) or OOPS (for "pio" values > 5 && < 255). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2007-07-08sis5513: adding PCI-IDUwe Koziolek
The SiS966 has one additional PCI-ID 1180. If the chipset is using this PCI-ID, the primary channel is connected to the first PATA-port. The secondary channel is connected to SATA-ports in IDE emulation mode. The legacy IO-ports are used. The including of the PCI-ID into pata_sis is not sufficient, because the legacy driver in drivers/ide is initialized before pata_sis. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03ide: ide_scan_pcibus(): check __pci_register_driver return valueAndrew Morton
drivers/ide/setup-pci.c: In function 'ide_scan_pcibus': drivers/ide/setup-pci.c:879: warning: ignoring return value of '__pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03ide: pdc202xx_new PLL input clock fixAlbert Lee
Recently the PLL input clock of Promise 2027x is sometimes detected higher than expected (e.g. 20.027 MHz compared to 16.714 MHz). It seems sometimes the mdelay() function is not as precise as it used to be. Per Alan's advice, HT or power management might affect the precision of mdelay(). This patch calls gettimeofday() to measure the time elapsed and calculate the PLL input clock accordingly. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bahadir Balban <bahadir.balban@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03it821x: fix incorrect SWDMA maskBartlomiej Zolnierkiewicz
SWDMA modes are unsupported by it821x. Attempts to tune SWDMA modes always fail (due to sanity check in ->speedproc) and result in PIO being tuned. * Fix incorrect SWDMA mask so core code won't try these modes and will just tune PIO if no other DMA modes are available. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-03amd74xx: resume fixBartlomiej Zolnierkiewicz
* Driver can't skip programming transfer mode on the device in amd_set_drive() (similar fix has been applied to via82cxxx driver ages ago). * While at it remove redundant warning (ide_config_drive_speed() already produces more valuable one). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03hpt366: use correct enablebits for HPT36xSergei Shtylyov
The HPT36x chips finally turned out to have the channel enable bits -- however, badly implemented. Make use of them despite it's probably only going to burden the driver's code -- assuming both channels are always enabled by the HighPoint BIOS anyway... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Cc: michal.kepien@poczta.onet.pl Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03hpt366: blacklist MAXTOR STM3320620A for UltraDMA/66Sergei Shtylyov
Add the MAXTOR STM3320620A drive into the UltraDMA/66 mode blacklist for the HPT36x chips. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03ide: Fix a theoretical Ooops caseAlan Cox
Found by a static analyser. It is in theory possible we dereference dev->id when it has become invalid. Re-order to avoid this. Not needed for new-ide as we no longer support the crazy exabyte nest stuff Signed-off-by: Alan Cox <alan@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03ide: never called printk statement in ide-taskfile.c::wait_drive_not_busyMasatake YAMATO
Look at wait_drive_not_busy in drivers/ide/ide-taskfile.c: static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries = 100; u8 stat; /* * Last sector was transfered, wait until drive is ready. * This can take up to 10 usec, but we will wait max 1 ms * (drive_cmd_intr() waits that long). */ while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) udelay(10); if (!retries) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; } `printk' is never called because `retries' never holds zero at the outside of `while' loop: when `retries' holds zero at the while's loop condition, `retries' will hold -1 at the if condition. Signed-off-by: Masatake YAMATO <jet@gyve.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: joe@perches.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-16Resume from RAM on HPC nx6325 brokenRafael J. Wysocki
generic_ide_resume() should check if dev->driver is not NULL before applying to_ide_driver() to it. Fix that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08ide: Add the MCP73/77 support to PATA driverPeer Chen
Add the MCP73/MCP77 support to PATA driver. bart: Added amd74xx_chipsets[] and amd_pci_tbl[] entries. bart: Bumped driver version. Signed-off-by: Peer Chen <peerchen@gmail.com> Cc: Alan Cox <alan@redhat.com>, Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08hpt366: disallow Ultra133 for HPT374Sergei Shtylyov
Eliminate UltraATA/133 support for HPT374 -- the chip isn't capable of this mode according to the manual, and doesn't even seem to tolerate 66 MHz DPLL clock... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Geller Sandor <wildy@petra.hos.u-szeged.hu> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08ide: generic IDE PCI driver, add another device exceptionJiri Slaby
generic IDE PCI driver, add another device exception This device is char device and is grabbed by generic ide driver: 00:0b.0 Class ffff: National Semiconductor Corporation 87410 IDE (rev ff) (prog-if ff) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Disallow generic IDE PCI driver to grab it by adding next condition. Also consolidate exceptions to one bigger 'switch (dev->vendor)'. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ingo Korb <ml@akana.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08ide: HPA detect from resumeLee Trager
Currently when system which have HPA require HPA to be detected and disabled upon resume from RAM or disk. The current IDE drivers do not do this nor does libata (obviously it since it doesn't support HPA yet). I have implemented this into the current IDE drivers and it has been tested by many others since 7/15/2006 in bug number 6840: http://bugzilla.kernel.org/show_bug.cgi?id=6840 and it has been confirmed to work fine with no problems. bart: added drv != NULL check to generic_ide_suspend() From: Lee Trager <lt73@cs.drexel.edu> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08it821x: RAID mode fixesBartlomiej Zolnierkiewicz
The DMA support for RAID mode broke after: commit 71ef51cc1756d1c56b57c70e7cc27a3559c81ee6 Author: Jens Axboe <axboe@suse.de> Date:   Fri Jul 28 09:02:17 2006 +0200     [PATCH] it821x: fix ide dma setup bug     Only enable dma for a valid speed setting.     Signed-off-by: Jens Axboe <axboe@suse.de> commit 0a8348d08677ad77ee353f96eb8745c693a05a13 Author: Jens Axboe <axboe@suse.de> Date:   Fri Jul 28 08:58:26 2006 +0200     [PATCH] ide: if the id fields looks screwy, disable DMA     It's the safer choice. Originally due to a bug in itx821x, but a     generally sound thing to do.     Signed-off-by: Jens Axboe <axboe@suse.de> However it worked by pure luck before Jens' fixes: bogus ide_dma_enable() usage in it821x driver combined with loosy check in ide_dma_verbose() allowed the hardware to operate in DMA mode. When these problems were fixed the DMA support broke... The source root for the regression turned out to be that the it821x.c code was clearing too much of id->field_valid. The IDE core code was using the original value of id->field_valid to do the tuning but later DMA got disabled in ide_dma_verbose() because of the incorrect id->field_valid fixup. Fix it. While at it: * Do fixup() after probing the drives but before tuning them (which is also OK w.r.t. ide_undecoded_slave() fixup). This change fixes device IDENTIFY data to be consistent before/after the tuning and allows us to remove extra re-tuning of drives from it821x_fixups(). * Fake MWDMA0 enabled/supported bits in IDENTIFY data if the device has DMA capable bit set (this is just to tell the IDE core that DMA is supported since it821x firmware takes care of DMA mode programming). * Don't touch timing registers and don't program transfer modes on devices et all when in RAID mode - depend solely on firmware to do the tuning (as suggested by Alan Cox and done in libata pata_it821x driver). Thanks for testing the patch goes out to Thomas Kuther. Cc: Thomas Kuther <gimpel@sonnenkinder.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08serverworks: fix CSB6 tuning logicBartlomiej Zolnierkiewicz
Problem noticed by Joe Zbiciak, see http://kerneltrap.org/node/8252 for details. On CSB6 the driver is using BIOS settings and not programming DMA/PIO timings itself. However the logic was completely broken and resulted in wrong timings being silently allowed (instead of being corrected by the driver). This bug would explain some data corruption/timeout issues with Serverworks MegaIDE in RAID mode that Alan Cox has fixed recently with: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=2074a106f52b6371885afbd714e929d60d0e3f64 For 2.6.23 we may be better off with completely switching the driver to always programming timings (libata pata_serverworks.c driver is doing things this way and there were no problems reported so far) but for 2.6.22 lets fix the bug in the simplest and the least intrusive way. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08serverworks: remove crappy codeBartlomiej Zolnierkiewicz
Remove crappy code noticed by Linus, see http://lkml.org/lkml/2007/5/23/476 for details. While at it simplify logic a bit. There should be no functionality changes caused by this patch. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24ide serverworks warning fixesAndrew Morton
gcc-4.3: drivers/ide/pci/serverworks.c: In function 'svwks_tune_chipset': drivers/ide/pci/serverworks.c:176: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:190: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:211: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:212: warning: overflow in implicit constant conversion Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24Match DMA blacklist entries between ide-dma.c and libata-core.cJunio C Hamano
There are a few entries in ata_device_blacklist[] in libata-core.c marked with HORKAGE_NODMA but are missing from drive_blacklist[] in ide-dma.c. This patch makes the lists in sync. Also remove a duplicated entry for "SanDisk SDP3B-64". Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24Add two missing chipsets to drivers/ide/ide-proc.cMika Kukkonen
Compiling with '-Wswitch-enum' I noticed following: CC drivers/ide/ide-proc.o drivers/ide/ide-proc.c: In function ‘proc_ide_read_imodel’: drivers/ide/ide-proc.c:54: warning: enumeration value ‘ide_etrax100’ not handled in switch drivers/ide/ide-proc.c:54: warning: enumeration value ‘ide_acorn’ not handled in switch How about the following patch? Signed-off-by: Mika Kukkonen <mikukkon@iki.fi> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24ide/pci/serverworks.c: Fix corruption/timeouts with MegaIDEAlan Cox
It turns out from customer reports to Red Hat and some PCI dumps that the MegaIDE in RAID mode doesn't provide the drive tuning data that the serverworks driver expects but sometimes does provide something that fools the code. For the RAID class case skip the oem setup and don't trust the BIOS data. We then tune from scratch and this sorts it out. (This has been confirmed on an afflicted IBM blade) [libata serverworks.c never trusts the BIOS in the first place so is accidentally immune] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24add the IDE device ID for ATI SB700Henry Su
Add the IDE device ID to atiixp_pci_tbl struct in atiixp.c for ATI SB700. From: Henry Su <henry.su@amd.com> Signed-off-by: Luugi Marsan <luugi.marsan@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16Use menuconfig objects: IDEJan Engelhardt
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16sl82c105: Switch to ref counting APIAlan Cox
Not sure how this one got missed in the great purge some time ago but it did. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: remove ide_use_dma()Bartlomiej Zolnierkiewicz
ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality and as all users of ide_use_dma() were converted to use ide_tune_dma() now it is possible to add missing checks to ide_tune_dma() and remove ide_use_dma() completely, so do it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>