aboutsummaryrefslogtreecommitdiff
path: root/drivers/ieee1394
AgeCommit message (Collapse)Author
2006-10-08Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: nodemgr: fix startup of knodemgrd
2006-10-08ieee1394: nodemgr: fix startup of knodemgrdStefan Richter
Revert a thinko in commit d2f119fe319528da8c76a1107459d6f478cbf28c: When knodemgrd starts, it needs to sleep until host->generation was incremented above its initial value of 0. My wrong logic caused it to start sending requests when the bus wasn't completely ready. Seen as "AT dma reset ctx=0, aborting transmission" messages in 2.6.19-rc1. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03Fix several typos in drivers/Matt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-30Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (48 commits) ieee1394: raw1394: arm functions slept in atomic context ieee1394: sbp2: enable auto spin-up for all SBP-2 devices MAINTAINERS: updates to IEEE 1394 subsystem maintainership ieee1394: ohci1394: check for errors in suspend or resume set power state of firewire host during suspend ieee1394: ohci1394: more obvious endianess handling ieee1394: ohci1394: fix endianess bug in debug message ieee1394: sbp2: don't prefer MODE SENSE 10 ieee1394: nodemgr: grab class.subsys.rwsem in nodemgr_resume_ne ieee1394: nodemgr: fix rwsem recursion ieee1394: sbp2: more help in Kconfig ieee1394: sbp2: prevent rare deadlock in shutdown ieee1394: sbp2: update includes ieee1394: sbp2: better handling of transport errors ieee1394: sbp2: recheck node generation in sbp2_update ieee1394: sbp2: safer agent reset in error handlers ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed" CONFIG_PM=n slim: drivers/ieee1394/ohci1394.c ieee1394: safer definition of empty macros video1394: add poll file operation support ...
2006-09-26i2c-algo-bit: Discard the mdelay data struct memberJean Delvare
i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-23ieee1394: raw1394: arm functions slept in atomic contextStefan Richter
Sleeping functions like copy_to_user were accessed inside spinlocks in raw1394's arm_register, arm_unregister, arm_get_buf, arm_set_buf. http://bugzilla.kernel.org/show_bug.cgi?id=7120 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: David Trent <DTrent@piacton.com> (cherry picked from e575953ec17c3f5c1e738847d2d16c241bb99783 commit)
2006-09-17ieee1394: sbp2: enable auto spin-up for all SBP-2 devicesStefan Richter
This is a follow-up to patch "ieee1394: sbp2: enable auto spin-up for Maxtor disks". When I 'ejected' an OXUF922 based HDD from a Mac OS X box, it was spun down by the Mac and did not spin up by itself when attached to a Linux box right after that. The first SCSI command that required the bridge to access the drive ended in sda:<6>sd 18:0:0:0: Device not ready: <6>: Current: sense key: Not Ready Additional sense: Logical unit not ready, initializing cmd. required Therefore the flag which instructs scsi_mod to send START STOP UNIT with START=1 ("make medium ready") after such a condition is now enabled unconditionally for all FireWire storage devices. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: ohci1394: check for errors in suspend or resumeStefan Richter
Some of the suspend and resume litany may fail. Tell the PCI core about it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17set power state of firewire host during suspendPavel Machek
Put firewire host controller in PCI Dx state for system suspend. (I was not able to measure any power savings, but it sounds like right thing to do, anyway.) Signed-off-by: Pavel Machek <pavel@suse.cz> Update by stefanr: Shuffle with existing PPC_PMAC code. Set power state in the resume hook too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: ohci1394: more obvious endianess handlingStefan Richter
Rename ohci1394's packet_swab to header_le32_to_cpu to better reflect what it actually does. Also, define a constant array as 'const' and check the array index properly. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: ohci1394: fix endianess bug in debug messageStefan Richter
The transaction labels were misprinted int the debug printk "Packet received from node..." due two byte-swapping once too often. Affected were big endian machines, except UniNorth based ones. Fix tested by Wolfgang Pfeiffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: don't prefer MODE SENSE 10Stefan Richter
In the old days, sbp2 used to coerce all MODE SENSE commands into the 10 bytes version. When all command set conversions were removed from sbp2 several months ago, sdev->use_10_for_ms = 1 was added. Meaning, higher SCSI layers preferred the 10 bytes version but would try the 6 bytes version if the former failed. Recently, a problem with the 10 bytes version was discovered. An Initio INIC-1530 firmware accepted the 10 bytes version but replied with bogus data, showing the HDD incorrectly as write-protected. Since RBC actually mandates MODE SENSE (6), I checked which version was sent by Windows XP and Mac OS X 10.3 to an SBP-2 target hosted by Linux --- it was the 6 bytes version. (Exception: OS X sent the 10 bytes version to an MMC target. RBC and SBC got MODE SENSE (6).) Therefore, drop the use_10_for_ms flag from sbp2. Now the upper layers will try MODE SENSE (6) before MODE SENSE (10) on all SBP-2 devices. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: nodemgr: grab class.subsys.rwsem in nodemgr_resume_neStefan Richter
nodemgr_resume_ne was iterating over nodemgr_ud_class.children without protection by nodemgr_ud_class.subsys.rwsem. FIXME: Shouldn't we rather use class->sem there, not class->subsys.rwsem? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: nodemgr: fix rwsem recursionStefan Richter
nodemgr_update_pdrv grabbed an rw semaphore (as reader) which was already taken by its caller's caller, nodemgr_probe_ne (as reader too). Reported by Miles Lane, call path pointed out by Arjan van de Ven. FIXME: Shouldn't we rather use class->sem there, not class->subsys.rwsem? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: more help in KconfigStefan Richter
Add some pointers to SCSI to the configuration menu item of sbp2. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: prevent rare deadlock in shutdownStefan Richter
Scsi_remove_device() may go into uninterruptible sleep if blocked. Therefore sbp2_remove() unblocks the Scsi_Host before the device is requested to be removed. But there could be another 1394 bus reset after that which would block the host again. The 1394 subsystem won't call sbp2_update() concurrently to sbp2_remove(), which is why there is no chance for sbp2_remove() to be unblocked by sbp2_update(). The fix is to tell sbp2's bus reset handler when a device is to be shut down so that it skips scsi_block_requests() on that host. As before, any new commands after a reset without reconnect will be failed quickly by sbp2scsi_queuecommand(). In the long term, means to go without scsi_block_requests() should be found. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: update includesStefan Richter
Remove unused includes. Add missing includes, i.e. explicitly include all used headers. Sort includes alphabetically. Replace one call to signal_pending(current) to avoid to include headers just for this line. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: better handling of transport errorsStefan Richter
If the target signals a transport failure via status block, complete the request with DID_BUSY to indicate to the SCSI subsystem that the command may succeed when retried. Also log diagnostic information if the status block shows a transport related problem. It may point to hardware faults. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: recheck node generation in sbp2_updateStefan Richter
While sbp2_update() is doing its duties after a bus reset, another reset could happen. Don't accept new requests until the next undisturbed sbp2_update() or until sbp2_remove(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: safer agent reset in error handlersStefan Richter
The scsi_host_template's eh_abort_handler and eh_device_reset_handler are allowed to sleep. Use this to run sbp2_agent_reset in the more reliable mode which returns _after_ its write transaction was finished. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed"Stefan Richter
Fix for http://bugzilla.kernel.org/show_bug.cgi?id=6948 Because sbp2 writes to the target's fetch agent's registers from within atomic context, it cannot sleep to guaranteedly get a free transaction label. This may repeatedly lead to "sbp2util_node_write_no_wait failed" and consequently to SCSI command abortion after timeout. A likely cause is that many queue_command softirqs may occur before khpsbpkt (the ieee1394 driver's thread which cleans up after finished transactions) is woken up to recycle tlabels. Sbp2 now schedules a workqueue job whenever sbp2_link_orb_command fails in sbp2util_node_write_no_wait. The job will reliably get a transaction label because it can sleep. We use the kernel-wide shared workqueue because it is unlikely that the job itself actually needs to sleep. In the improbable case that it has to sleep, it doesn't need to sleep long since the standard transaction timeout is 100ms. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17CONFIG_PM=n slim: drivers/ieee1394/ohci1394.cAlexey Dobriyan
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: safer definition of empty macrosStefan Richter
A deactivated macro, defined as "#define foo(bar)", will result in silent corruption if somebody forgets a semicolon after a call to foo. Replace it by "#define foo(bar) do {} while (0)" which will reveal any respective syntax errors. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17video1394: add poll file operation supportDavid Moore
This patch adds support for the poll file operation to the video1394 driver. Signed-off-by: David Moore <dcm@acm.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17the scheduled removal of drivers/ieee1394/sbp2.c:force_inquiry_hackAdrian Bunk
This patch contains the scheduled removal of the force_inquiry_hack module parameter. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17Initialize ieee1394 early when built inAndi Kleen
This makes debugging with firescope easier. Signed-off-by: Andi Kleen <ak@suse.de> (original patch) Update: - no need for #ifdef MODULE - add comment in ieee1394_core, more verbose comment in ohci1394 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (update)
2006-09-17ieee1394: sbp2: convert sbp2util_down_timeout to waitqueueStefan Richter
The waitqueue API is used to replace a custom wait mechanism. Only one global waitqueue (instead of per-device waitqueues or completions) is added because there is usually just one waiter. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: more checks of status blockStefan Richter
- Add checks for the (very unlikely) cases that the target writes too little or too much status data or writes unsolicited status. - Indicate that these and similar conditions are unlikely(). - Check the 'resp' and 'sbp_status' fields for possible failure status. - Slightly optimize access macros for the status block bitfields. - Unify a few related log messages. TODO: Check if 'src'==1, then withhold the respective ORB from reuse until status for any subsequent ORB was received. This is an old bug whose fix requires more complex command queue handling. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: safer initialization of status fifoStefan Richter
Sbp2's copy of the status fifo was cleared when management ORBs or new command ORBs were prepared. The latter had potential for a race condition if the block layer's soft IRQ and the 1394 LLD's interrupt handler ran on different CPUs. It would also yield wrong status if a command was completed with non-zero completion status before other commands that had zero completion status, and no new command was enqueued in the meantime. Now, the status buffer is cleared right before it is written. Thus it ends up in the following simpler and safer access pattern: - sbp2_alloc_device: allocates and implicitly clears once, - sbp2_handle_status_write: clears, writes, and reads, - sbp2_query_logins, sbp2_login_device, sbp2_reconnect_device: read. The latter three do not race with sbp2_handle_status_write because of how the protocol works. As a tiny optimization, the first two quadlets of the status never need to be cleared. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: optimize DMA direction of command ORBsStefan Richter
Only the driver writes ORBs, the device just reads them. Therefore PCI_DMA_BIDIRECTIONAL can be replaced by PCI_DMA_TODEVICE which may be cheaper on some architectures. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: discard return value of sbp2_link_orb_commandStefan Richter
Since sbp2 is at the moment unable to do anything with the return value of sbp2_link_orb_command, just discard it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: sbp2: safer last_orb and next_ORB handlingStefan Richter
The sbp2 initiator has two ways to tell a target's fetch agent about new command ORBs: - Write the ORB's address to the ORB_POINTER register. This must not be done while the fetch agent is active. - Put the ORB's address into the previously submitted ORB's next_ORB field and write to the DOORBELL register. This may be done while the fetch agent is active or suspended. It must not be done while the fetch agent is in reset state. Sbp2 has a last_orb pointer which indicates in what way a new command should be announced. That pointer is concurrently accessed at various occasions. Furthermore, initiator and target are accessing the next_ORB field of ORBs concurrently and asynchronously. This patch does: - Protect all initiator accesses to last_orb by sbp2_command_orb_lock. - Add pci_dma_sync_single_for_device before a previously submitted ORB's next_ORB field is overwritten. - Insert a memory barrier between when next_ORB_lo and next_ORB_hi are overwritten. Next_ORB_hi must not be updated before next_ORB_lo. - Remove the rather unspecific and now superfluous qualifier "volatile" from the next_ORB fields. - Add comments on how last_orb is connected with what is known about the target's fetch agent's state. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: remove #include <asm/semaphore.h>Stefan Richter
These includes in ieee1394_core and eth1394 are obsolete. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: shrink tlabel pools, remove tpool semaphoresStefan Richter
This patch reduces the size of struct hpsb_host and also removes semaphores from ieee1394_transactions.c. On i386, struct hpsb_host shrinks from 10656 bytes to 6688 bytes. This is accomplished by - using a single wait_queue for hpsb_get_tlabel instead of many instances of semaphores, - using a single lock to serialize access to all tlabel pools (the protected code regions are small, i.e. lock contention very low), - omitting the sysfs attribute tlabels_allocations. Drawback: In the rare case that a process needs to sleep because all transaction labels for the node are temporarily exhausted, it is also woken up if a tlabel for a different node became free, checks for an available tlabel, and is put to sleep again. The check is not costly and the situation occurs extremely rarely. (Tlabels are typically only exhausted if there was no context switch to the khpsbpkt thread which recycles tlables.) Therefore the benefit of reduced tpool size outweighs this drawback. The sysfs attributes tlabels_free and tlabels_mask are not compiled anymore unless CONFIG_IEEE1394_VERBOSEDEBUG is set. The by far biggest member of struct hpsb_host, the struct csr_control csr (5272 bytes on i386), is now placed at the end of struct hpsb_host. Note, hpsb_get_tlabel calls the macro wait_event_interruptible with a condition argument which has a side effect (allocation of a tlabel and manipulation of the packet). This side effect happens only if the condition is true. The patch relies on wait_event_interruptible not evaluating the condition again after it became true. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17ieee1394: merge from LinusStefan Richter
Conflicts: drivers/ieee1394/hosts.c Patch "lockdep: annotate ieee1394 skb-queue-head locking" was meddling with patch "ieee1394: fix kerneldoc of hpsb_alloc_host". Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-08-27[PATCH] 1394: fix for recently added firewire patch that breaks things on ppcDanny Tholen
Recently a patch was added for preliminary suspend/resume handling on !PPC_PMAC. However, this broke both suspend and firewire on powerpc because it saves the pci state after the device has already been disabled. This moves the save state to before the pmac specific code. Signed-off-by: Danny Tholen <obiwan@mailmij.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Collins <bcollins@ubuntu.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disksStefan Richter
At least Maxtor OneTouch III require a "start stop unit" command after auto spin-down before the next access can proceed. This patch activates the responsible code in scsi_mod for all Maxtor SBP-2 disks. https://bugzilla.novell.com/show_bug.cgi?id=183011 Maybe that should be done for all SBP-2 disks, but better be cautious. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: annotate ieee1394 skb-queue-head lockingIngo Molnar
ieee1394 reuses the skb infrastructure of the networking code, and uses two skb-head queues: ->pending_packet_queue and hpsbpkt_queue. The latter is used in the usual fashion: processed from a kernel thread. The other one, ->pending_packet_queue is also processed from hardirq context (f.e. in hpsb_bus_reset()), which is not what the networking code usually does (which completes from softirq or process context). This locking assymetry can be totally correct if done carefully, but it can also be dangerous if networking helper functions are reused, which could assume traditional networking use. It would probably be more robust to push this completion into a workqueue - but technically the code can be 100% correct, and lockdep has to be taught about it. The solution is to split the ->pending_packet_queue skb-head->lock class from the networking lock-class by using a private lock-validator key. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] ieee1394: fix kerneldoc of hpsb_alloc_hostStefan Richter
There was stuff between the comment and the function. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: nodemgr: convert nodemgr_serialize semaphore to mutexStefan Richter
Another trivial sem2mutex conversion. Side note: nodemgr_serialize's purpose, when introduced in linux1394's revision 529 in July 2002, was to protect several data structures which are now largely handled by or together with Linux' driver core and are now protected by the LDM's own mechanisms. It may very well be possible to remove this mutex now. But fully parallelized node scanning is on our long-term TODO list anyway; the mutex will certainly go away then. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: nodemgr: switch to kthread api, replace reset semaphoreStefan Richter
Convert nodemgr's host thread from kernel_thread to kthread and its sleep/restart mechanism from a counting semaphore to a schedule()/ wake_up_process() scheme. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: nodemgr: make module parameter ignore_drivers writableStefan Richter
Nodemgr's ignore_drivers variable is exposed as a module load parameter (therefore also as a sysfs attribute below /sys/module) and additionally as an attribute below /sys/bus/ieee1394. Since the latter is writable, make the former writable too. Note, the bus's attribute ignore_drivers is only relevant to newly added units, not to present or suspended or resuming units. Those have their own attribute ignore_driver. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: nodemgr: do not spawn kernel_thread for sysfs rescanStefan Richter
nodemgr.c::fw_set_rescan() is used to re-run the driver core over nodemgr's representation of unit directories in order to initiate protocol driver probes. It is initiated via write access to one of nodemgr's sysfs attributes. The purpose is to attach drivers to units after switching a unit's ignore_driver attribute from 1 to 0. It is not really necessary to fork a kernel_thread for this job. The call to kernel_thread() can be eliminated to avoid the deprecated API and to simplify the code a bit. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: nodemgr: remove unnecessary includesStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: raw1394: remove redundant counting semaphoreStefan Richter
An already existing wait queue replaces raw1394's complete_sem which was maintained in parallel to the wait queue. The role of the semaphore's counter is taken over by a direct check of what was really counted: The presence of items in the list of completed requests. Notes: - raw1394_release() sleeps uninterruptibly until all requests were completed. This is the same behaviour as before the patch. - The macros wait_event and wait_event_interruptible are called with a condition argument which has a side effect, i.e. manipulation of the requests list. This side effect happens only if the condition is true. The patch relies on the fact that wait_event[_interruptible] does not evaluate the condition again after it became true. - The diffstat looks unfavorable with respect to added lines of code. However 19 of them are comments, and some are due to separation of existing code blocks into two small helper functions. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: dv1394: sem2mutex conversionStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (not runtime-tested) Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: clean up declarations of hpsb_*_config_romStefan Richter
hpsb_update_config_rom() is defined in csr.c, not hosts.c. hpsb_get_config_rom() does not exist. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: remove unused macros HPSB_PANIC and HPSB_TRACEStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: remove redundant code from ieee1394_hotplug.hStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>