aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/ulp
AgeCommit message (Collapse)Author
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-03net: skb->dst accessorsEric Dumazet
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-30net: unset IFF_XMIT_DST_RELEASE for qeth and ipoibEric Dumazet
Last two drivers that need skb->dst in their start_xmit() function Tell dev_hard_start_xmit() to no release it by unsetting IFF_XMIT_DST_RELEASE Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-23[SCSI] libiscsi: add task aborted stateMike Christie
If a task did not complete normally due to a TMF, libiscsi will now complete the task with the state ISCSI_TASK_ABRT_TMF. Drivers like bnx2i that need to free resources if a command did not complete normally can then check the task state. If a driver does not need to send a special command if we have dropped the session then they can check for ISCSI_TASK_ABRT_SESS_RECOV. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-23[SCSI] iscsi: pass ep connect shostMike Christie
When we create the tcp/ip connection by calling ep_connect, we currently just go by the routing table info. I think there are two problems with this. 1. Some drivers do not have access to a routing table. Some drivers like qla4xxx do not even know about other ports. 2. If you have two initiator ports on the same subnet, the user may have set things up so that session1 was supposed to be run through port1. and session2 was supposed to be run through port2. It looks like we could end with both sessions going through one of the ports. Fixes for cxgb3i from Karen Xie. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-18net: Fix ipoib rtnl_lock sysfs deadlock.Eric W. Biederman
Network device sysfs files that grab the rtnl_lock unconditionally will deadlock if accessed when the network device is being unregistered. So use trylock and syscall_restart to avoid this deadlock. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (53 commits) [SCSI] libosd: OSD2r05: on-the-wire changes for latest OSD2 revision 5. [SCSI] libosd: OSD2r05: OSD_CRYPTO_KEYID_SIZE will grow 20 => 32 bytes [SCSI] libosd: OSD2r05: Prepare for rev5 attribute list changes [SCSI] libosd: fix potential ERR_PTR dereference in osd_initiator.c [SCSI] mpt2sas : bump driver version to 01.100.02.00 [SCSI] mpt2sas: fix hotplug event processing [SCSI] mpt2sas : release diagnotic buffers prior host reset [SCSI] mpt2sas : Broadcast Primative AEN bug fix [SCSI] mpt2sas : Identify Dell series-7 adapters at driver load time [SCSI] mpt2sas : driver name needs to be in the MPT2IOCINFO ioctl [SCSI] mpt2sas : running out of message frames [SCSI] mpt2sas : fix oops when firmware sends large sense buffer size [SCSI] mpt2sas : the sanity check in base_interrupt needs to be on dword boundary [SCSI] mpt2sas : unique ioctl magic number [SCSI] fix sign extension with 1.5TB usb-storage LBD=y [SCSI] ipr: Fix sleeping function called with interrupts disabled [SCSI] fcoe: fip: add multicast filter to receive FIP advertisements. [SCSI] libfc: Fix compilation warnings with allmodconfig [SCSI] fcoe: fix spelling typos and bad comments [SCSI] fcoe: don't export functions that are internal to fcoe ...
2009-04-27[SCSI] cxgb3i, iser, iscsi_tcp: set target can queueMike Christie
Set target can queue limit to the number of preallocated session tasks we have. This along with the cxgb3i can_queue patch will fix a throughput problem where it could only queue one LU worth of data at a time. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-20IPoIB: Disable NAPI while CQ is being drainedYossi Etigin
If NAPI is enabled while IPoIB's CQ is being drained, it creates a race on priv->ibwc between ipoib_poll() and ipoib_drain_cq(), leading to memory corruption. The solution is to enable/disable NAPI in ipoib_ib_dev_{open/stop}() instead of in ipoib_{open/stop}(), and sync NAPI on the INITIALIZED flag instead on the ADMIN_UP flag. This way NAPI will be disabled when ipoib_drain_cq() is called. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1587>. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Add support for new SFP+ PHY RDMA/nes: Add wide_ppm_offset parm for switch compatibility RDMA/nes: Fix SFP+ PHY initialization RDMA/nes: Fix nes_nic_cm_xmit() error handling RDMA/nes: Fix error handling issues RDMA/nes: Fix incorrect casts on 32-bit architectures IPoIB: Document newish features RDMA/cma: Create cm id even when IB port is down RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groups IPoIB: Avoid free_netdev() BUG when destroying a child interface mlx4_core: Don't leak mailbox for SET_PORT on Ethernet ports RDMA/cxgb3: Release dependent resources only when endpoint memory is freed. RDMA/cxgb3: Handle EEH events IB/mlx4: Use pgprot_writecombine() for BlueFlame pages
2009-03-31IPoIB: Avoid free_netdev() BUG when destroying a child interfaceRoland Dreier
We have to release the RTNL before calling free_netdev() so that the device state has a chance to become NETREG_UNREGISTERED. Otherwise when removing a child interface, we hit the BUG() that tests the device state in free_netdev(). Reported-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits) [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition [SCSI] mpt2sas: make global symbols unique [SCSI] sd: Make revalidate less chatty [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices [SCSI] sd: Refactor sd_read_capacity() [SCSI] mpt2sas v00.100.11.15 [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h [SCSI] ch: Add scsi type modalias [SCSI] 3w-9xxx: add power management support [SCSI] bsg: add linux/types.h include to bsg.h [SCSI] cxgb3i: fix function descriptions [SCSI] libiscsi: fix possbile null ptr session command cleanup [SCSI] iscsi class: remove host no argument from session creation callout [SCSI] libiscsi: pass session failure a session struct [SCSI] iscsi lib: remove qdepth param from iscsi host allocation [SCSI] iscsi lib: have lib create work queue for transmitting IO [SCSI] iscsi class: fix lock dep warning on logout [SCSI] libiscsi: don't cap queue depth in iscsi modules [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging ...
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits) ixgbe: Allow Priority Flow Control settings to survive a device reset net: core: remove unneeded include in net/core/utils.c. e1000e: update version number e1000e: fix close interrupt race e1000e: fix loss of multicast packets e1000e: commonize tx cleanup routine to match e1000 & igb netfilter: fix nf_logger name in ebt_ulog. netfilter: fix warning in ebt_ulog init function. netfilter: fix warning about invalid const usage e1000: fix close race with interrupt e1000: cleanup clean_tx_irq routine so that it completely cleans ring e1000: fix tx hang detect logic and address dma mapping issues bridge: bad error handling when adding invalid ether address bonding: select current active slave when enslaving device for mode tlb and alb gianfar: reallocate skb when headroom is not enough for fcb Bump release date to 25Mar2009 and version to 0.22 r6040: Fix second PHY address qeth: fix wait_event_timeout handling qeth: check for completion of a running recovery qeth: unregister MAC addresses during recovery. ... Manually fixed up conflicts in: drivers/infiniband/hw/cxgb3/cxio_hal.h drivers/infiniband/hw/nes/nes_nic.c
2009-03-24Merge branches 'cxgb3', 'endian', 'ipath', 'ipoib', 'iser', 'mad', 'misc', ↵Roland Dreier
'mlx4', 'mthca', 'nes' and 'sysfs' into for-next
2009-03-21infiniband: convert ipoib to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13[SCSI] iscsi class: remove host no argument from session creation calloutMike Christie
We do not need to have llds set the host no for the session's parent, because we know the session's parent is going to be the host. This removes it from the session creation callback and converts the drivers. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] iscsi lib: remove qdepth param from iscsi host allocationMike Christie
The qdepth setting was useful when we needed libiscsi to verify the setting. Now we just need to make sure if older tools passed in zero then we need to set some default. So this patch just has us use the sht->cmd_per_lun or if for LLD does a host per session then we can set it on per host basis. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] iscsi lib: have lib create work queue for transmitting IOMike Christie
We were using the shost work queue which ended up being a little akward since all iscsi hosts need a thread for scanning, but only drivers hooked into libiscsi need a workqueue for transmitting. So this patch moves the xmit workqueue to the lib. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] libiscsi: don't cap queue depth in iscsi modulesMike Christie
There is no need to cap the queue depth in the modules. We set this in userspace and can do that there. For performance testing with ram based targets, this is helpful since we can have very high queue depths. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] iser: have iser use its own loggingMike Christie
iser has its own logging inrfastrucutre. Convert it to use it instead of libiscsi. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-27IB/iser: Remove hard setting of path MTUOr Gerlitz
Remove hard setting of the IB MTU used by iSER's RC queue-pair to 1K, as this was done due to inter-op issues with an old iser target which is not used any more. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-17IPoIB: In unicast_arp_send(), only free newly-created pathsJack Morgenstein
If path_rec_start() returns error, call path_free() only if the path was newly-created. If we free an existing path whose valid flag was zero, (but do not detach it from the list) we cause corruption of the path list (of which it is a member), and get a kernel crash. The simplest solution is to not free an existing path -- just leave it in the list as-is (i.e., with its valid flag cleared). Thanks to Yossi Etigin of Voltaire for identifying the problem flow which caused the kernel crash. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Moni Shua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-16IPoIB: Do not print error messages for multicast join retriesYossi Etigin
When IPoIB tries to join a multicast group, and the SA module's SM address handle is NULL (because of an SM change, etc), the join returns with -EAGAIN status. In that case, don't print an error message unless multicast debugging is enabled. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-14IPoIB: Fix deadlock between ipoib_open() and child interface createRoland Dreier
Fix a deadlock between child interface creation/deletion and ipoib start/stop. The former takes vlan_mutex, and then might take RTNL via register_netdev()/unregister_netdev(). The latter is executed with RTNL held, and tries to take vlan_mutex, which can lead to an AB-BA deadlock. Fix this by having the child interface creation/deletion code take the RTNL first so vlan_mutex always nests inside RTNL. We can use register_netdevice() for child interfaces because we form the interface name from the parent interface and hence don't need the '%' expansion of register_netdev(). Reported-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-14IPoIB: Fix hang in napi_disable() if P_Key is never foundRoland Dreier
After commit fe25c561 ("IPoIB: Don't enable NAPI when it's already enabled"), if an interface is brought up but the corresponding P_Key never appears, then ipoib_stop() will hang in napi_disable(), because ipoib_open() returns before it does napi_enable(). Fix this by changing ipoib_open() to call napi_enable() even if the P_Key isn't present. Reported-by: Yossi Etigin <yosefe@Voltaire.COM> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Add dependency on INFINIBAND_ADDR_TRANS IPoIB: Do not join broadcast group if interface is brought down RDMA/nes: Fix for NIPQUAD removal IPoIB: Fix loss of connectivity after bonding failover on both sides IB/mlx4: Don't register IB device for adapters with no IB ports mlx4_core: Fix warning from min() IB/ehca: spin_lock_irqsave() takes an unsigned long
2009-01-12Merge branches 'ehca', 'ipoib', 'iser', 'mlx4' and 'nes' into for-nextRoland Dreier
2009-01-12IB/iser: Add dependency on INFINIBAND_ADDR_TRANSRandy Dunlap
Fix ib_iser build to depend on INFINIBAND_ADDR_TRANS; if INET=y but IPV6=n, then the RDMA CM is not built but INFINIBAND_ISER can be enabled, leading to: ERROR: "rdma_destroy_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_connect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_destroy_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_create_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_create_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_resolve_route" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_disconnect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_resolve_addr" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2009-01-12IPoIB: Do not join broadcast group if interface is brought downYossi Etigin
Because the ipoib_workqueue is not flushed when ipoib interface is brought down, ipoib_mcast_join() may trigger a join to the broadcast group after priv->broadcast was set to NULL (during cleanup). This will cause the system to be a member of the broadcast group when interface is down. As a side effect, this breaks the optimization of setting the Q_key only when joining the broadcast group. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-09IPoIB: Fix loss of connectivity after bonding failover on both sidesYossi Etigin
Fix bonding failover in the case both peers failover and the gratuitous ARP is lost. In that case, the sender side will create an ipoib_neigh and issue a path request with the old GID first. When skb->dst->neighbour->ha changes due to ARP refresh, this ipoib_neigh will not be added to the path->list of the path of the new GID, because the ipoib_neigh already exists. It will not have an AH either, because of sender-side failover. Therefore, it will not get an AH when the path is resolved. The solution here is to compare GIDs in ipoib_start_xmit() even if neigh->ah is invalid. Comparing with an uninitialized value of neigh->dgid should be fine, since a spurious match is harmless (and astronomically unlikely too). Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-06infiniband: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-29[SCSI] libiscsi: pass opcode into alloc_pdu calloutMike Christie
We do not need to allocate a itt for data_out, so this passes the opcode to the alloc_pdu callout. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] iser: convert iser to new alloc_pdu apiMike Christie
This just converts iser to new alloc_pdu api. It still preallocates the pdu, so there is no difference. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21IB/iser: Avoid recv buffer exhaustion caused by unexpected PDUsDavid Disseldorp
iSCSI/iSER targets may send PDUs without a prior request from the initiator. RFC 5046 refers to these PDUs as "unexpected". NOP-In PDUs with itt=RESERVED and Asynchronous Message PDUs occupy this category. The amount of active "unexpected" PDU's an iSER target may have at any time is governed by the MaxOutstandingUnexpectedPDUs key, which is not yet supported. Currently when an iSER target sends an "unexpected" PDU, the initiators recv buffer consumed by the PDU is not replaced. If over initial_post_recv_bufs_num "unexpected" PDUs are received then the receive queue will run out of receive work requests entirely. This patch ensures recv buffers consumed by "unexpected" PDUs are replaced in the next iser_post_receive_control() call. Signed-off-by: David Disseldorp <ddiss@sgi.com> Signed-off-by: Ken Sandars <ksandars@sgi.com> Acked-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/isdn/i4l/isdn_net.c fs/cifs/connect.c
2008-11-12IPoIB: Fix crash in path_rec_completion()Yossi Etigin
Fix a crash in path_rec_completion() during an SM up/down loop. If more than one path record request is issued, the first completion releases path->done, allowing ipoib_flush_paths() to free the path, and thus corrupting it for the second completion. Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") added the field path->valid and changed the test "if (!path)" to "if (!path || !path->valid)". This change made it possible for a path with an outstanding query to pass the test and issue another query on the same path. Having two queries on the same path leads to a crash. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1325>. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-12IPoIB: Fix hang in ipoib_flush_paths()Yossi Etigin
ipoib_flush_paths() can hang during an SM up/down loop: if path_rec_start() fails (for instance, because there is no sm_ah), the path is still added to the path list by neigh_add_path(). Then, ipoib_flush_paths() will wait for path->done, but it will never complete because the request was not issued at all. Fix this by completing path->done if issuing the query fails. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1329>. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-12IPoIB: Don't enable NAPI when it's already enabledYossi Etigin
If a P_Key is not present when an interface is created, ipoib_open() will return after doing napi_enable(). ipoib_open() will be called again from ipoib_pkey_poll() when the P_Key appears, after NAPI has already been enabled, and try to enable it again. This triggers a BUG_ON() in napi_enable(). Fix this by moving the call to napi_enable() to after the test for P_Key presence. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-31drivers: replace NIPQUAD()Harvey Harrison
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29net: replace %p6 with %pI6Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28infiniband: remove IPOIB_GID_RAW_ARG, IPOIB_GID_ARG, IPOIB_GID_FMTHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28infiniband: ipoib replace IPOIB_GID_FMT with %p6Harvey Harrison
Replace all uses of IPOIB_GID_FMT, IPOIB_GID_RAW_ARG() and IPOIB_GID_ARG() Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28infiniband: use %p6 for printing message idsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Reject dynamic memory add/remove when ehca adapter is present IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter IPoIB: Set netdev offload features properly for child (VLAN) interfaces IPoIB: Clean up ethtool support mlx4_core: Add Ethernet PCI device IDs mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC mlx4_core: Multiple port type support mlx4_core: Ethernet MAC/VLAN management mlx4_core: Get ethernet MTU and default address from firmware mlx4_core: Support multiple pre-reserved QP regions Update NetEffect maintainer emails to Intel emails RDMA/cxgb3: Remove cmid reference on tid allocation failures IB/mad: Use krealloc() to resize snoop table IPoIB: Always initialize poll_timer to avoid crash on unload IB/ehca: Don't allow creating UC QP with SRQ mlx4_core: Add QP range reservation support RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
2008-10-22IPoIB: Set netdev offload features properly for child (VLAN) interfacesOr Gerlitz
Child devices were created without any offload features set, fix this by moving the code that computes the features into generic function which is now called through non-child and child device creation. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> -- v1 has a bug where the 'result' flag in ipoib_vlan_add may be used uninitialized Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22IPoIB: Clean up ethtool supportOr Gerlitz
Add a get_rx_csum method. Remove the driver's own get_tso method, as the ethtool kernel code uses the default one if nothing is provided. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...