aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/ulp
AgeCommit message (Collapse)Author
2007-07-02IPoIB/cm: Partial error clean up unmaps wrong addressRalph Campbell
If a page can't be allocated for the frag list of a skb, the code to unmap the partially allocated list is off by one. For exaple, if 'frags' equals one, i == 0, and the alloc_page() fails, then the old loop would have unmapped mapping[1] which is uninitialized. The same would happen if the call to ib_dma_map_page() failed. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-21IPoIB/cm: Remove dead definition of struct ipoib_cm_idRoland Dreier
It's completely unused. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-21IPoIB/cm: Fix interoperability when MTU doesn't matchMichael S. Tsirkin
IPoIB connected mode currently rejects a connection request unless the supported MTU is >= the local netdevice MTU. This breaks interoperability with implementations that might have tweaked IPOIB_CM_MTU, and there's real no longer a reason to do so: this test is just a leftover from when we did not tweak MTU per-connection. Fix this by making the test as permissive as possible. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-21IPoIB/cm: Initialize RX before moving QP to RTRMichael S. Tsirkin
Fix a crasher bug in IPoIB CM: once a QP is in the RTR state, a receive completion (or even an asynchronous error) might be observed on this QP, so we have to initialize all of our receive data structures before moving to the RTR state. As an optimization (since modify_qp might take a long time), the jiffies update done when moving RX to the passive_ids list is also left in place to reduce the chance of the RX being misdetected as stale. This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=662>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29IPoIB/cm: Fix performance regression on MellanoxMichael S. Tsirkin
commit 518b1646 ("IPoIB/cm: Fix SRQ WR leak") introduced a severe performance regression on Mellanox cards, because keeping a QP in the error state for extended periods of time moves hardware to the slow path (until the QP is destroyed). For example, MPI latency goes from ~3 usecs to ~7 usecs. Fix this by posting a send WR on one of the QPs that are being flushed, instead of using a separate drain QP that is kept in the error state. This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=636>, reported and bisected by Scott Weitzenkamp at Cisco and debugged by Sasha Mikheev at Voltaire. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-24IPoIB/cm: Drain cq in ipoib_cm_dev_stop()Michael S. Tsirkin
Since NAPI polling is disabled while ipoib_cm_dev_stop() is running, ipoib_cm_dev_stop() must poll the CQ itself in order to see the packets draining. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-24IPoIB/cm: Fix timeout check in ipoib_cm_dev_stop()Michael S. Tsirkin
time_after() was used backwards, so the timeout occurred immediately. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21IPoIB/cm: Fix SRQ WR leakMichael S. Tsirkin
SRQ WR leakage has been observed with IPoIB/CM: e.g. flipping ports on and off will, with time, leak out all WRs and then all connections will start getting RNR NAKs. Fix this in the way suggested by spec: move the QP being destroyed to the error state, wait for "Last WQE Reached" event and then post WR on a "drain QP" connected to the same CQ. Once we observe a completion on the drain QP, it's safe to call ib_destroy_qp. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21IB/ipoib: Fix typos in error messagesMichael S. Tsirkin
Trivial error message fixups. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IPoIB: Handle P_Key table reorderingYosef Etigin
SM reconfiguration or failover possibly causes a shuffling of the values in the P_Key table. Right now, IPoIB only queries for the P_Key index once when it creates the device QP, and hence there are problems if the index of a P_Key value changes. Fix this by using the PKEY_CHANGE event to trigger a recheck of the P_Key index. Signed-off-by: Yosef Etigin <yosefe@voltaire.com> Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14IPoIB/cm: Optimize stale connection detectionMichael S. Tsirkin
In the presence of some running RX connections, we repeat queue_delayed_work calls each 4 RX WRs, which is a waste. It's enough to start stale task when a first passive connection is added, and rerun it every IPOIB_CM_RX_DELAY as long as there are outstanding passive connections. This removes some code from RX data path. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Convert to NAPI IB: Return "maybe missed event" hint from ib_req_notify_cq() IB: Add CQ comp_vector support IB/ipath: Fix a race condition when generating ACKs IB/ipath: Fix two more spin lock problems IB/fmr_pool: Add prefix to all printks IB/srp: Set proc_name IB/srp: Add orig_dgid sysfs attribute to scsi_host IPoIB/cm: Don't crash if remote side uses one QP for both directions RDMA/cxgb3: Support for new abort logic RDMA/cxgb3: Initialize cpu_idx field in cpl_close_listserv_req message RDMA/cxgb3: Fail qp creation if the requested max_inline is too large RDMA/cxgb3: Fix TERM codes IPoIB/cm: Fix error handling in ipoib_cm_dev_open() IB/ipath: Don't corrupt pending mmap list when unmapped objects are freed IB/mthca: Work around kernel QP starvation IB/ipath: Don't put QP in timeout queue if waiting to send IB/ipath: Don't call spin_lock_irq() from interrupt context
2007-05-06IPoIB: Convert to NAPIRoland Dreier
Convert the IP-over-InfiniBand network device driver over to using NAPI to handle completions for the main CQ. This covers all receives as well as datagram mode sends; send completions for connected mode connections are still handled from interrupt context. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06IB: Add CQ comp_vector supportMichael S. Tsirkin
Add a num_comp_vectors member to struct ib_device and extend ib_create_cq() to pass in a comp_vector parameter -- this parallels the userspace libibverbs API. Update all hardware drivers to set num_comp_vectors to 1 and have all ULPs pass 0 for the comp_vector value. Pass the value of num_comp_vectors to userspace rather than hard-coding a value of 1. We want multiple CQ event vector support (via MSI-X or similar for adapters that can generate multiple interrupts), but it's not clear how many vectors we want, or how we want to deal with policy issues such as how to decide which vector to use or how to set up interrupt affinity. This patch is useful for experimenting, since no core changes will be necessary when updating a driver to support multiple vectors, and we know that we want to make at least these changes anyway. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06IB/srp: Set proc_nameRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06IB/srp: Add orig_dgid sysfs attribute to scsi_hostIshai Rabinovitz
Add an orig_dgid attribute in sysfs for SRP scsi_hosts, so that userspace can tell what the original dgid value written to the add_target file was, even if the connection is redirected to a different port while connecting. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06IPoIB/cm: Don't crash if remote side uses one QP for both directionsMichael S. Tsirkin
The IPoIB CM spec allows the use of a single connection in both active->passive and passive->active directions. The current Linux code uses one connection for both directions, but if another node only uses one connection for both directions, we oops when we try to look up the passive connection. Fix by checking that qp_context is non-NULL before dereferencing it. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
2007-05-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits) [SCSI] fusion: fix domain validation loops [SCSI] qla2xxx: fix regression on sparc64 [SCSI] modalias for scsi devices [SCSI] sg: cap reserved_size values at max_sectors [SCSI] BusLogic: stop using check_region [SCSI] tgt: fix rdma transfer bugs [SCSI] aacraid: fix aacraid not finding device [SCSI] aacraid: Correct SMC products in aacraid.txt [SCSI] scsi_error.c: Add EH Start Unit retry [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test. [SCSI] ipr: Driver version to 2.3.2 [SCSI] ipr: Faster sg list fetch [SCSI] ipr: Return better qc_issue errors [SCSI] ipr: Disrupt device error [SCSI] ipr: Improve async error logging level control [SCSI] ipr: PCI unblock config access fix [SCSI] ipr: Fix for oops following SATA request sense [SCSI] ipr: Log error for SAS dual path switch [SCSI] ipr: Enable logging of debug error data for all devices [SCSI] ipr: Add new PCI-E IDs to device table ...
2007-05-02PCI: Cleanup the includes of <linux/pci.h>Jean Delvare
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-30IPoIB/cm: Fix error handling in ipoib_cm_dev_open()Michael S. Tsirkin
If skb allocation fails when we start the device, we call ipoib_cm_dev_stop() even though ipoib_cm_dev_open() did not run to completion, so we pass an invalid pointer to ib_destroy_cm_id and get an oops. Fix by clearing cm.id on error, and testing it in cm_dev_stop(). This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=561> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-27Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (49 commits) IB: Set class_dev->dev in core for nice device symlink IB/ehca: Implement modify_port IB/umad: Clarify documentation of transaction ID IPoIB/cm: spin_lock_irqsave() -> spin_lock_irq() replacements IB/mad: Change SMI to use enums rather than magic return codes IB/umad: Implement GRH handling for sent/received MADs IB/ipoib: Use ib_init_ah_from_path to initialize ah_attr IB/sa: Set src_path_bits correctly in ib_init_ah_from_path() IB/ucm: Simplify ib_ucm_event() RDMA/ucma: Simplify ucma_get_event() IB/mthca: Simplify CQ cleaning in mthca_free_qp() IB/mthca: Fix mthca_write_mtt() on HCAs with hidden memory IB/mthca: Update HCA firmware revisions IB/ipath: Fix WC format drift between user and kernel space IB/ipath: Check that a UD work request's address handle is valid IB/ipath: Remove duplicate stuff from ipath_verbs.h IB/ipath: Check reserved memory keys IB/ipath: Fix unit selection when all CPU affinity bits set IB/ipath: Don't allow QPs 0 and 1 to be opened multiple times IB/ipath: Disable IB link earlier in shutdown sequence ...
2007-04-25[SK_BUFF]: Introduce skb_reset_mac_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24IPoIB/cm: spin_lock_irqsave() -> spin_lock_irq() replacementsRoland Dreier
There are quite a few places in ipoib_cm.c where we know IRQs are enabled because we do something that sleeps in the same function, so we can convert several occurrences of spin_lock_irqsave() to a plain spin_lock_irq(). This cleans up the source a little and makes the code smaller too: add/remove: 0/0 grow/shrink: 1/5 up/down: 3/-51 (-48) function old new delta ipoib_cm_tx_reap 403 406 +3 ipoib_cm_stale_task 146 145 -1 ipoib_cm_dev_stop 173 172 -1 ipoib_cm_tx_handler 964 956 -8 ipoib_cm_rx_handler 956 937 -19 ipoib_cm_skb_reap 212 190 -22 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-24IB/ipoib: Use ib_init_ah_from_path to initialize ah_attrSean Hefty
To support destinations that are not on the local IB subnet, IPoIB should include the GRH information when constructing an address handle. Using the existing ib_init_ah_from_path() call will do this for us. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2007-04-18IPoIB: Remove pointless opcode field from debugging outputRoland Dreier
There's no point in printing the opcode field in the completion handling debugging output, since the type of completion is already printed at the beginning of the line. In fact the opcode field is not even defined for completions with a status other than success. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-10IPoIB/cm: Fix DMA direction typoMichael S. Tsirkin
Receive buffers need to be mapped with DMA_FROM_DEVICE. Incorrectly mapping with DMA_TO_DEVICE causes a hard lock on ppc64 machines with an IOMMU. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=431> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-05IB/iser: Don't defer connection failure notification to workqueueErez Zilber
When a connection is terminated asynchronously from the iSCSI layer's perspective, iSER needs to notify the iSCSI layer that the connection has failed. This is done using a workqueue (switched to from the iSER tasklet context). Meanwhile, the connection object (that holds the work struct) is released. If the workqueue function wasn't called yet, it will be called later with a NULL pointer, which will crash the kernel. The context switch (tasklet to workqueue) is not required, and everything can be done from the iSER tasklet. This eliminates the NULL work struct bug (and simplifies the code). Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-28Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Handle aborting a command after it is sent IB/mthca: Fix thinko in init_mr_table() RDMA/cxgb3: Fix resource leak in cxio_hal_init_ctrl_qp()
2007-03-26IB/iser: Handle aborting a command after it is sentErez Zilber
The SCSI midlayer may abort a command that was already sent. If the initiator is still trying to send the command (or data-out PDUs for that command), the QP may time out after the midlayer times out. Therefore, when aborting the command, iSER may still have references for the command's buffers. When sending these PDUs, the sends will complete with an error and their resources will be released then. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-25[NET]: Fix neighbour destructor handling.Alexey Kuznetsov
->neigh_destructor() is killed (not used), replaced with ->neigh_cleanup(), which is called when neighbor entry goes to dead state. At this point everything is still valid: neigh->dev, neigh->parms etc. The device should guarantee that dead neighbor entries (neigh->dead != 0) do not get private part initialized, otherwise nobody will cleanup it. I think this is enough for ipoib which is the only user of this thing. Initialization private part of neighbor entries happens in ipib start_xmit routine, which is not reached when device is down. But it would be better to add explicit test for neigh->dead in any case. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22IB/ipoib: Fix thinko in packet length checksMichael S. Tsirkin
The packet length checks in ipoib are broken: we add 4 bytes (IPoIB encapsulation header) when sending a packet, not 20 bytes (hardware address length) to each packet. Therefore, if connected mode is enabled so that the interface MTU is larger than the multicast MTU, IPoIB may end up trying to send too-long multicast packets. For example, multicast is broken if a message of size 2048 bytes is sent on an interface with UD MTU 2048, because 2048 is bigger than the real limit of 2044 but the code tests against the wrong limit of 2060. This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=418>, submitted by Scott Weitzenkamp <sweitzen@cisco.com>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB: Fix use-after-free in path_rec_completion()Michael S. Tsirkin
The connected mode code added the possibility that an neigh struct gets freed in the list_for_each_entry() loop in path_rec_completion(), which causes a use-after-free. Fix this by changing to the _safe variant of the list walking macro. This was spotted by the Coverity checker (CID 1567). Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB: Fix race in detaching from mcast group before attachingSean Hefty
There's a race between ipoib_mcast_leave() and ipoib_mcast_join_finish() where we can try to detach from a multicast group before we've attached to it. Fix this by reordering the code in ipoib_mcast_leave to free the multicast group first, which waits for the multicast callback thread (which calls ipoib_mcast_join_finish()) to complete before detaching from the group. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB/cm: Fix reaping of stale connectionsMichael S. Tsirkin
The sense of the time_after_eq() test in ipoib_cm_stale_task() is reversed so that only non-stale connections are reaped. Fix this by changing to time_before_eq(). Noticed by Pradeep Satyanarayana <pradeep@us.ibm.com>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-11[SCSI] iscsi: rename DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTHMike Christie
This patch renames DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH to avoid confusion with the drivers default values (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH is the iscsi RFC specific default). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-08IPoIB: Turn on interface's carrier after broadcast group is joinedShirley Ma
Do netif_carrier_on() right after the IPv4 broadcast multicast group is joined, rather than waiting for all of the initial set of multicast group joins to finish. This allows at least IPv4 traffic to limp along on broken fabrics where not all multicast groups can be joined. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-27IPoIB: Only handle async events for one portRoland Dreier
An asynchronous event carries the port number that the event occurred on, so there's no reason for an IPoIB interface to process an event associated with a different local HCA port. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-26IPoIB: Correct debugging output when path record lookup failsRoland Dreier
If path_rec_completion() is passed a non-NULL path record pointer along with an unsuccessful status value, the tracing code incorrectly prints the (invalid) DLID from the path record rather than the more interesting status code. The actual logic of the function correctly uses the path record only if the status indicates a successful lookup. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-21IPoIB: Remove unused local_rate trackingRoland Dreier
Now that low-level drivers handle the conversion from an absolute rate to a relative rate, there's no need for the IPoIB driver to keep track of the local port's data rate. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-20IPoIB/cm: Improve small message bandwidthMichael S. Tsirkin
Avoid the overhead of freeing/reallocating and mapping/unmapping for DMA pages that have not been written to by hardware. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/sa: Track multicast join/leave requestsSean Hefty
The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IPoIB: CM error handling thinko fixMichael S. Tsirkin
ipoib_cm_alloc_rx_skb() might be called from IRQ context, so it must use dev_kfree_skb_any(), not kfree_skb(). Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IPoIB: Only allow root to change between datagram and connected modeRoland Dreier
Change the permissions of the "mode" sysfs attribute to be S_IWUSR instead of S_IWUGO. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-13Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Always fill MTTs from CPU IB/mthca: Merge MR and FMR space on 64-bit systems IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs IB/mthca: Give reserved MTTs a separate cache line IB/mthca: Fix reserved MTTs calculation on mem-free HCAs RDMA/cxgb3: Add driver for Chelsio T3 RNIC IB: Remove redundant "_wq" from workqueue names RDMA/cma: Increment port number after close to avoid re-use IB/ehca: Fix memleak on module unloading IB/mthca: Work around gcc bug on sparc64 IPoIB: Connected mode experimental support IB/core: Use ARRAY_SIZE macro for mandatory_table IB/mthca: Use correct structure size in call to memset()
2007-02-12[PATCH] mark struct file_operations const 3Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10IPoIB: Connected mode experimental supportMichael S. Tsirkin
The following patch adds experimental support for IPoIB connected mode, as defined by the draft from the IETF ipoib working group. The idea is to increase performance by increasing the MTU from the maximum of 2K (theoretically 4K) supported by IPoIB on top of UD. With this code, I'm able to get 800MByte/sec or more with netperf without options on a Mellanox 4x back-to-back DDR system. Some notes on code: 1. SRQ is used for scalability to large cluster sizes 2. Only RC connections are used (UC does not support SRQ now) 3. Retry count is set to 0 since spec draft warns against retries 4. Each connection is used for data transfers in only 1 direction, so each connection is either active(TX) or passive (RX). 2 sides that want to communicate create 2 connections. 5. Each active (TX) connection has a separate CQ for send completions - this keeps the code simple without CQ resize and other tricks 6. To detect stale passive side connections (where the remote side is down), we keep an LRU list of passive connections (updated once per second per connection) and destroy a connection after it has been unused for several seconds. The LRU rule makes it possible to avoid scanning connections that have recently been active. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-09[PATCH] iscsi endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-07Network: convert network devices to use struct device instead of class_deviceGreg Kroah-Hartman
This lets the network core have the ability to handle suspend/resume issues, if it wants to. Thanks to Frederik Deweerdt <frederik.deweerdt@gmail.com> for the arm driver fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-04IB/srp: Don't wait for response when QP is in error state.Ishai Rabinovitz
When there is a call to send_tsk_mgmt SRP posts a send and waits for 5 seconds to get a response. When the QP is in the error state it is obvious that there will be no response so it is quite useless to wait. In fact, the timeout causes SRP to wait a long time to reconnect when a QP error occurs. (Each abort and each reset_device calls send_tsk_mgmt, which waits for the timeout). The following patch solves this problem by identifying the failure and returning an immediate error code. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>