aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2009-01-26iw_cxgb3: handle chip reset notificationsDivy Le Ray
Freeze activity when notified that the underlying chip is getting reset on a EEH event or fatal error. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-16Merge branches 'ehca', 'ipoib' and 'mlx4' into for-linusRoland Dreier
2009-01-16IB/ehca: Use consistent types for ehca_plpar_hcall9()Stephen Rothwell
ehca_plpar_hcall9() takes an unsigned long array, so make all callers pass that in. This fixes warnings introduced by commit fe333321 ("powerpc: Change u64/s64 to a long long integer type"), which changed u64 from unsigned long to unsigned long long. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-16IB/ehca: Fix printk format warnings from u64 type changeStephen Rothwell
Commit fe333321 ("powerpc: Change u64/s64 to a long long integer type") changed u64 from unsigned long to unsigned long long, which means that printk formats for printing u64 values should use "ll" instead of "l" to avoid warnings. Fix all the places affected by this in ehca. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-16IPoIB: Do not print error messages for multicast join retriesYossi Etigin
When IPoIB tries to join a multicast group, and the SA module's SM address handle is NULL (because of an SM change, etc), the join returns with -EAGAIN status. In that case, don't print an error message unless multicast debugging is enabled. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-16IB/mlx4: Fix memory ordering problem when posting LSO sendsRoland Dreier
The current work request posting code writes the LSO segment before writing any data segments. This leaves a window where the LSO segment overwrites the stamping in one cacheline that the HCA prefetches before the rest of the cacheline is filled with the correct data segments. When the HCA processes this work request, a local protection error may result. Fix this by saving the LSO header size field off and writing it only after all data segments are written. This fix is a cleaned-up version of a patch from Jack Morgenstein <jackm@dev.mellanox.co.il>. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1383>. Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-14IPoIB: Fix deadlock between ipoib_open() and child interface createRoland Dreier
Fix a deadlock between child interface creation/deletion and ipoib start/stop. The former takes vlan_mutex, and then might take RTNL via register_netdev()/unregister_netdev(). The latter is executed with RTNL held, and tries to take vlan_mutex, which can lead to an AB-BA deadlock. Fix this by having the child interface creation/deletion code take the RTNL first so vlan_mutex always nests inside RTNL. We can use register_netdevice() for child interfaces because we form the interface name from the parent interface and hence don't need the '%' expansion of register_netdev(). Reported-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-14IPoIB: Fix hang in napi_disable() if P_Key is never foundRoland Dreier
After commit fe25c561 ("IPoIB: Don't enable NAPI when it's already enabled"), if an interface is brought up but the corresponding P_Key never appears, then ipoib_stop() will hang in napi_disable(), because ipoib_open() returns before it does napi_enable(). Fix this by changing ipoib_open() to call napi_enable() even if the P_Key isn't present. Reported-by: Yossi Etigin <yosefe@Voltaire.COM> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Add dependency on INFINIBAND_ADDR_TRANS IPoIB: Do not join broadcast group if interface is brought down RDMA/nes: Fix for NIPQUAD removal IPoIB: Fix loss of connectivity after bonding failover on both sides IB/mlx4: Don't register IB device for adapters with no IB ports mlx4_core: Fix warning from min() IB/ehca: spin_lock_irqsave() takes an unsigned long
2009-01-12Merge branches 'ehca', 'ipoib', 'iser', 'mlx4' and 'nes' into for-nextRoland Dreier
2009-01-12IB/iser: Add dependency on INFINIBAND_ADDR_TRANSRandy Dunlap
Fix ib_iser build to depend on INFINIBAND_ADDR_TRANS; if INET=y but IPV6=n, then the RDMA CM is not built but INFINIBAND_ISER can be enabled, leading to: ERROR: "rdma_destroy_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_connect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_destroy_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_create_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_create_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_resolve_route" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_disconnect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_resolve_addr" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2009-01-12IPoIB: Do not join broadcast group if interface is brought downYossi Etigin
Because the ipoib_workqueue is not flushed when ipoib interface is brought down, ipoib_mcast_join() may trigger a join to the broadcast group after priv->broadcast was set to NULL (during cleanup). This will cause the system to be a member of the broadcast group when interface is down. As a side effect, this breaks the optimization of setting the Q_key only when joining the broadcast group. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-10RDMA/nes: Fix for NIPQUAD removalHarvey Harrison
Commit 63779436 ("drivers: replace NIPQUAD()") accidentally replaced some HIPQUAD()s, causing IP addresses to be printed in reverse order. Add temporary local vars until the byteswapping can be pushed further up the stack. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-09IPoIB: Fix loss of connectivity after bonding failover on both sidesYossi Etigin
Fix bonding failover in the case both peers failover and the gratuitous ARP is lost. In that case, the sender side will create an ipoib_neigh and issue a path request with the old GID first. When skb->dst->neighbour->ha changes due to ARP refresh, this ipoib_neigh will not be added to the path->list of the path of the new GID, because the ipoib_neigh already exists. It will not have an AH either, because of sender-side failover. Therefore, it will not get an AH when the path is resolved. The solution here is to compare GIDs in ipoib_start_xmit() even if neigh->ah is invalid. Comparing with an uninitialized value of neigh->dgid should be fine, since a spurious match is harmless (and astronomically unlikely too). Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-09IB/mlx4: Don't register IB device for adapters with no IB portsRoland Dreier
If the mlx4_ib driver finds an adapter that has only ethernet ports, the current code will register an IB device with 0 ports. Nothing useful or sensible can be done with such a device, so just skip registering it. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-08fix similar typos to successfullColy Li
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) trivial: chack -> check typo fix in main Makefile trivial: Add a space (and a comma) to a printk in 8250 driver trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx trivial: Fix misspelling of "firmware" in powerpc Makefile trivial: Fix misspelling of "firmware" in usb.c trivial: Fix misspelling of "firmware" in qla1280.c trivial: Fix misspelling of "firmware" in a100u2w.c trivial: Fix misspelling of "firmware" in megaraid.c trivial: Fix misspelling of "firmware" in ql4_mbx.c trivial: Fix misspelling of "firmware" in acpi_memhotplug.c trivial: Fix misspelling of "firmware" in ipw2100.c trivial: Fix misspelling of "firmware" in atmel.c trivial: Fix misspelled firmware in Kconfig trivial: fix an -> a typos in documentation and comments trivial: fix then -> than typos in comments and documentation trivial: update Jesper Juhl CREDITS entry with new email trivial: fix singal -> signal typo trivial: Fix incorrect use of "loose" in event.c trivial: printk: fix indentation of new_text_line declaration trivial: rtc-stk17ta8: fix sparse warning ...
2009-01-07IB/ehca: spin_lock_irqsave() takes an unsigned longStephen Rothwell
The flags argument to spin_lock_irqsave() should really be unsigned long. This will also help prevent some warnings when we change u64 to unsigned long long. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-06infiniband: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-05zero i_uid/i_gid on inode allocationAl Viro
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31Merge branch 'master' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/x86/kernel/io_apic.c
2008-12-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix reading SL field out of cqe->sl_vid RDMA/addr: Fix build breakage when IPv6 is disabled
2008-12-30Merge branches 'cma' and 'mlx4' into for-linusRoland Dreier
2008-12-30IB/mlx4: Fix reading SL field out of cqe->sl_vidRoland Dreier
Commit f780a9f1 ("mlx4_core: Add ethernet fields to CQE struct") introduced a bug in how wc->sl is set in mlx4_ib_poll_one() -- since cqe->sl_vid is a big-endian value, the shift must be done after converting to host endianness. This bug was found using sparse endianness checking. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-29RDMA/addr: Fix build breakage when IPv6 is disabledRoland Dreier
Commit 38617c64 ("RDMA/addr: Add support for translating IPv6 addresses") broke the build when CONFIG_IPV6=n, because the ib_addr module unconditionally attempted to call ipv6_chk_addr() and other IPv6 functions that are not defined when IPv6 is disabled. Fix this by only building IPv6 support if CONFIG_IPV6 is turned on, and add a Kconfig dependency to prevent the ib_addr code from being built in when IPv6 is built modular. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-30cpumask: use new cpumask API in drivers/infiniband/hw/ipathRusty Russell
Impact: cleanup We're moving from handing around cpumask_t's to handing around struct cpumask *'s. cpus_*, cpumask_t and cpu_*_map are deprecated: convert to cpumask_*, cpu_*_mask. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ralph Campbell <infinipath@qlogic.com>
2008-12-30cpumask: use new cpumask API in drivers/infiniband/hw/ehcaRusty Russell
Impact: cleanup We're moving from handing around cpumask_t's to handing around struct cpumask *'s. cpus_*, cpumask_t and cpu_*_map are deprecated: convert to cpumask_*, cpu_*_mask. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Tested-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com>
2008-12-30cpumask: use for_each_online_cpu() in drivers/infiniband/hw/ehca/ehca_irq.cRusty Russell
Impact: cleanup In future, accessing cpu numbers beyond nr_cpu_ids (the runtime limit) will be undefined. We can avoid future problems by using for_each_online_cpu() here. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Tested-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com>
2008-12-29[SCSI] libiscsi: pass opcode into alloc_pdu calloutMike Christie
We do not need to allocate a itt for data_out, so this passes the opcode to the alloc_pdu callout. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] iser: convert iser to new alloc_pdu apiMike Christie
This just converts iser to new alloc_pdu api. It still preallocates the pdu, so there is no difference. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-26net: Fix warning fallout from recent NAPI interface changes.David S. Miller
When we removed the network device argument from several NAPI interfaces in 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces.") several drivers now started getting unused variable warnings. This fixes those up. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-24Merge branches 'cma', 'ehca', 'ipath', 'iser', 'mlx4' and 'nes' into for-nextRoland Dreier
2008-12-24IB/mlx4: Set ownership bit correctly when copying CQEs during CQ resizeJack Morgenstein
When resizing a CQ, when copying over unpolled CQEs from the old CQE buffer to the new buffer, the ownership bit must be set appropriately for the new buffer, or the ownership bit in the new buffer gets corrupted. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-24RDMA/nes: Remove tx_free_listFaisal Latif
There is no lock protecting tx_free_list thus causing a system crash when skb_dequeue() is called and the list is empty. Since it did not give any performance boost under heavy load, remove it to simplify the code. Replace get_free_pkt() with dev_alloc_skb() to allocate MAX_CM_BUFFER skb for connection establishment/teardown as well as MPA request/response. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-24RDMA/cma: Add IPv6 supportAleksey Senin
Handle AF_INET6 cases where required, and use struct sockaddr_storage wherever an IPv6 address might be stored. Signed-off-by: Aleksey Senin <aleksey@alst60.(none)> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-24RDMA/addr: Add support for translating IPv6 addressesAleksey Senin
Add support for translating AF_INET6 addresses to the IB address translation service. This requires using struct sockaddr_storage instead of struct sockaddr wherever an IPv6 address might be stored, and adding cases to handle IPv6 in addition to IPv4 to the various translation functions. Signed-off-by: Aleksey Senin <aleksey@alst60.(none)> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22mlx4_core: Add support for multiple completion event vectorsYevgeny Petrilin
When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-21IB/iser: Avoid recv buffer exhaustion caused by unexpected PDUsDavid Disseldorp
iSCSI/iSER targets may send PDUs without a prior request from the initiator. RFC 5046 refers to these PDUs as "unexpected". NOP-In PDUs with itt=RESERVED and Asynchronous Message PDUs occupy this category. The amount of active "unexpected" PDU's an iSER target may have at any time is governed by the MaxOutstandingUnexpectedPDUs key, which is not yet supported. Currently when an iSER target sends an "unexpected" PDU, the initiators recv buffer consumed by the PDU is not replaced. If over initial_post_recv_bufs_num "unexpected" PDUs are received then the receive queue will run out of receive work requests entirely. This patch ensures recv buffers consumed by "unexpected" PDUs are replaced in the next iser_post_receive_control() call. Signed-off-by: David Disseldorp <ddiss@sgi.com> Signed-off-by: Ken Sandars <ksandars@sgi.com> Acked-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-21IB/ehca: Remove redundant test of vpageJulia Lawall
vpage is checked not to be NULL just after it is initialized at the beginning of each loop iteration. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ehca: Replace modulus operations in flush error completion pathStefan Roscher
With the latest flush error completion patch we introduced modulus operation to calculate the next index within a qmap. Based on comments from other mailing lists we decided to optimize this operation by using an addition and an if-statement instead of modulus, even though this is on the error path. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Add locking for interrupt use of ipath_pd contexts vs freeDave Olson
Fixes timing race resulting in panic. Not a performance sensitive path. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Fix spi_pioindex valueDave Olson
ipath_piobufbase was a single value offset, but is multiple values on newer chips, so use only the 32 bits for the 2K buffers (4K buffers are currently used only by the driver). Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Only do 1X workaround on rev1 chipsDave Olson
Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Don't count IB symbol and link errors unless link is UPDave Olson
Implement the ignoring of ibsymbol errors and linkrecover errors while the link is at less than INIT (long needed), to get accurate counts. Particularly an issue when doing non-IBTA DDR negotiation with chips from vendors that do not support IBTA mode negotiation. If the driver is unloaded, and there is a delta, the adjusted counters are written back to the chip, so they stay adjusted across driver reload. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Check return value of dma_map_single()Ralph Campbell
This fixes an obvious oversight where the return value is not checked for error. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Fix PSN of send WQEs after an RDMA read resendRalph Campbell
The PSN of the first packet after an RDMA read is based on the size of the RDMA read request. This is calculated correctly for the WQE sent after the first request message but not on subsequent requests if the RDMA read is resent. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>