aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2006-01-30IB/mthca: Semaphore to mutex conversionsRoland Dreier
Convert semaphores to mutexes in mthca. Leave firmware command interface poll_sem and event_sem as semaphores. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30IB/mthca: Don't cancel commands on a signalMichael S. Tsirkin
We have run into the following problem: if a task receives a signal while in the process of e.g. destroying a resource (which could be because the relevant file was closed) mthca could bail out from trying to take a command interface semaphore without performing the appropriate command to tell hardware that the resource is being destroyed. As a result we see messages like ib_mthca 0000:04:00.0: HW2SW_CQ failed (-4) In this case, hardware could access the resource after the memory has been freed, possibly causing memory corruption. A simple solution is to replace down_interruptible() by down() in command interface activation. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> [ It's also not safe to bail out on multicast table operations, since they may be invoked on the cleanup path too. So use down() for mcg_table.sem too. ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30IB/srp: Semaphore to mutex conversionIngo Molnar
Convert srp_host->target_mutex from a semaphore to a mutex. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30IB/mthca: Relax UAR size checkMichael S. Tsirkin
There are some cards around that have UAR (user access region) size different from 8 MB. Relax our sanity check to make sure that the PCI BAR is big enough to access the UAR size reported by the device firmware instead. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-21IB/mthca: Use correct GID in MADs sent on port 2Michael S. Tsirkin
mthca_create_ah() includes the port number in the GID index. The reverse needs to be done in mthca_read_ah(). Noted by Hal Rosenstock. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17IPoIB: Lock accesses to multicast packet queuesMichael S. Tsirkin
Avoid corrupting mcast->pkt_queue by serializing access with priv->tx_lock. Also, update dropped packet statistics to count multicast packets removed from pkt_queue as dropped. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17IB/sa_query: Flush scheduled work before unloading moduleMichael S. Tsirkin
sa_query schedules work on IB asynchronous events. After unregistering the async event handler, make sure that this work has completed before releasing the IB device (and possibly allowing the sa_query module text to go away). Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17IB/uverbs: Flush scheduled work before unloading moduleMichael S. Tsirkin
uverbs might schedule work to clean up when a file is closed. Make sure that this work runs before allowing module text to go away. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17IPoIB: Make sure path is fully initialized before using itMichael S. Tsirkin
The SA path record query completion can initialize path->pathrec.dlid before IPoIB's callback runs and initializes path->ah, so we must test ah rather than dlid. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-14[PATCH] Unlinline a bunch of other functionsArjan van de Ven
Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13IB: convert from semaphores to mutexesIngo Molnar
semaphore to mutex conversion by Ingo and Arjan's script. Signed-off-by: Ingo Molnar <mingo@elte.hu> [ Sanity-checked on real IB hardware ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Initialize grh_present before using itMichael S. Tsirkin
build_mlx_header() was using sqp->ud_header.grh_present before it was initialized by mthca_read_ah(). Furthermore, header->grh_present is set by ib_ud_header_init, so there's no need to set it again in mthca_read_ah(). Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Cosmetic: use the ALIGN macroMichael S. Tsirkin
Use the ALIGN macro to simplify some rounding code. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Fix memory leaks in error handlingJack Morgenstein
Fix memory leaks in mthca_create_qp() and mthca_create_srq() error handling. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Fix memory leak of multicast group structuresIshai Rabinovitz
Convert "/ (1 << lg)" to ">> lg" for a slight code size reduction. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24) function old new delta mthca_map_cmd 613 589 -24 Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IPoIB: Fix memory leak of multicast group structuresEli Cohen
The current handling of multicast groups in IPoIB ends up never freeing send-only multicast groups. It turns out the logic was much more complicated than it needed to be; we can fix this bug and completely kill ipoib_mcast_dev_down() at the same time. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-11IPoIB: Take dev->xmit_lock around mc_list accessesMichael S. Tsirkin
dev->mc_list accesses must be protected by dev->xmit_lock. Found by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10IPoIB: Fix address handle refcounting for multicast groupsEli Cohen
Multiple ipoib_neigh structures on mcast->neigh_list may point to the same ah. This means that ipoib_mcast_free() can't just make a list of ah structs to free, since this might end up trying to add the same ah to the list more than once. Handle this in ipoib_multicast.c in the same way as it is handled in ipoib_main.c for struct ipoib_path. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10IPoIB: Fix error path in ipoib_mcast_dev_flush()Eli Cohen
Don't leak memory on allocation failure for broadcast mcast group. Also, print a warning to match handling for other mcast groups. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10IB: Add node_guid to struct ib_deviceSean Hefty
Add a node_guid field to struct ib_device. It is the responsibility of the low-level driver to initialize this field before registering a device with the midlayer. Convert everyone to looking at this field instead of calling ib_query_device() when all they want is the node GUID, and remove the node_guid field from struct ib_device_attr. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: Factor common MAD initialization codeRoland Dreier
Factor out common code for initializing MAD packets, which is shared by many query routines in mthca_provider.c, into init_query_mad(). add/remove: 1/0 grow/shrink: 0/4 up/down: 16/-44 (-28) function old new delta init_query_mad - 16 +16 mthca_query_port 521 518 -3 mthca_query_pkey 301 294 -7 mthca_query_device 648 641 -7 mthca_query_gid 453 426 -27 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: kzalloc conversionsRoland Dreier
Convert kmalloc()/memset(,0,) pairs to kzalloc(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: prevent event queue overrunMichael S. Tsirkin
I am seeing EQ overruns in SDP stress tests: if the CQ completion handler arms a CQ, this could generate more EQEs, so that EQ will never get empty and consumer index will never get updated. This is similiar to what we have with command interface: /* * cmd_event() may add more commands. * The card will think the queue has overflowed if * we don't tell it we've been processing events. */ However, for completion events, we *don't* want to update the consumer index on each event. So, perform EQ doorbell coalescing: allocate EQs with some spare EQEs, and update once we run out of them. The value 0x80 was selected to avoid any performance impact. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: fix page shift calculation in mthca_reg_phys_mr()Michael S. Tsirkin
For all pages except possibly the last one, the byte beyond the buffer end must be page aligned. Therefore, when computing the page shift to use, OR the end addresses of the buffers as well as the start addresses into the mask we check. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
2006-01-08[PATCH] fix more missing includesTim Schmielau
Include fixes for 2.6.14-git11. Should allow to remove sched.h from module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more to come since I haven't yet checked the other archs. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06IB: Set GIDs correctly in ib_create_ah_from_wc()Ralph Campbell
ib_create_ah_from_wc() doesn't create the correct return address (AH) when there is a GRH present (source & dest GIDs need to be swapped). Signed-off-by: Ralph Campbell <ralphc@pathscale.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/uverbs: Release event file reference on ib_uverbs_create_cq() errorJack Morgenstein
ib_uverbs_create_cq() should release the completion channel event file if an error occurs after it looks it up. Also, if userspace asks for a completion channel and we don't find it, an error should be returned instead of silently creating a CQ without a completion channel. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/uverbs: set ah_flags when creating address handleRalph Campbell
AH attribute's ah_flags need to be set according to the is_global flag passed in from userspace. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/uverbs: Fix reference counting on error pathsJack Morgenstein
If an operation fails after incrementing an object's reference count, then it should decrement the reference count on the error path. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: Add support for automatic path migration (APM)Dotan Barak
Add code to modify QP operation to handle setting alternate paths for connected QPs. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: Fill in vendor_err field in completion with errorMichael S. Tsirkin
Fill vendor_err field in completion with error. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: multiple fixes for multicast group handlingJack Morgenstein
Multicast group management fixes: . Fix leak of mailbox memory in error handling on multicast group operations. . Free AMGM indices at detach and in attach error handling. . Fix amount to shift for aligning next_gid_index in mailbox: it starts at bit 6, not bit 5. . Allocate AMGM index after end of MGM table, in the range num_mgms to multicast table size - 1. Add some BUG_ON checks to catch cases where the index falls in the MGM hash area. . Initialize the list of QPs in a newly-allocated group from AMGM to 0 This is necessary since when a group is moved from AMGM to MGM (in the case where the MGM entry has been emptied of QPs), the AMGM entry is not reset to 0 (and we don't want an extra command to do that). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: fix for RTR-to-RTS transition in modify QPJack Morgenstein
PKEY_INDEX is not a legal parameter in the RTR->RTS transition. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: fix for SQEr-to-RTS transition in modify QPJack Morgenstein
Fixes to SQEr->RTS transition in modify_qp: 1. The flag IB_QP_ACCESS_FLAGS is optional for UC qps 2. The SQEr state is not supported for RC qps Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: max_inline_data handling tweaksJack Morgenstein
Fix a case where copying max_inline_data from a successful create_qp capabilities output to create_qp input could cause EINVAL error: mthca_set_qp_size must check max_inline_data directly against max_desc_sz; checking qp->sq.max_gs is wrong since max_inline_data depends on the qp type and does not involve max_sg. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05IB/mthca: create_eq with size not a power of 2Michael S. Tsirkin
Fix mthca_create_eq for when the EQ size is not a power of 2. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05IB/mthca: check port validity in modify_qpJack Morgenstein
Modify_qp should check that the physical port number provided is a legal value. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05IB/mthca: check return value in mthca_dev_lim callJack Morgenstein
Check error return on call to mthca_dev_lim for Tavor (as is done for memfree). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04[PATCH] driver core: replace "hotplug" by "uevent"Kay Sievers
Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04IB/mthca: fix WQE size calculation in create-srqJack Morgenstein
Thinko: 64 bytes is the minimum SRQ WQE size (not the maximum). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-03[INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.hArnaldo Carvalho de Melo
To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-15IB/mthca: Fix corner cases in max_rd_atomic value handling in modify QPJack Morgenstein
sae and sre bits should only be set when setting sra_max. Further, in the old code, if the caller specifies max_rd_atomic = 0, the sre and sae bits are still set, with the result that the QP ends up with max_rd_atomic = 1 in effect. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15IB/mthca: Fix IB_QP_ACCESS_FLAGS handling.Jack Morgenstein
This patch corrects some corner cases in managing the RAE/RRE bits in the mthca qp context. These bits need to be zero if the user requests max_dest_rd_atomic of zero. The bits need to be restored to the value implied by the qp access flags attribute in a previous (or the current) modify-qp command if the dest_rd_atomic variable is changed to non-zero. In the current implementation, the following scenario will not work: RESET-to-INIT set QP access flags to all disabled (zeroes) INIT-to-RTR set max_dest_rd_atomic=10, AND set qp_access_flags = IB_ACCESS_REMOTE_READ | IB_ACCESS_REMOTE_ATOMIC The current code will incorrectly take the access-flags value set in the RESET-to-INIT transition. We can simplify, and correct, this IB_QP_ACCESS_FLAGS handling: it is always safe to set qp access flags in the firmware command if either of IB_QP_MAX_DEST_RD_ATOMIC or IB_QP_ACCESS_FLAGS is set, so let's just set it to the correct value, always. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15IB/mthca: Fix SRQ cleanup during QP destroyJack Morgenstein
When cleaning up a CQ for a QP attached to SRQ, need to free an SRQ WQE only if the CQE is a receive completion. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15IB/mthca: Fix thinko in mthca_table_find()Michael S. Tsirkin
break only escapes from the innermost loop, and we want to escape both loops and return an answer. Noticed by Ishai Rabinovitch. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-09IB/mthca: don't change driver's copy of attributes if modify QP failsJack Morgenstein
Only change the driver's copy of the QP attributes in modify QP after checking the modify QP command completed successfully. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-09IB/mthca: correct log2 calculationJack Morgenstein
Fix thinko in rd_atomic calculation: ffs(x) - 1 does not find the next power of 2 -- it should be fls(x - 1). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-09IB/mthca: check RDMA limitsJack Morgenstein
Add limit checking on rd_atomic and dest_rd_atomic attributes: especially for max_dest_rd_atomic, a value that is larger than HCA capability can cause RDB overflow and corruption of another QP. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>