aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2006-11-20IB/ipath: Depend on CONFIG_NETBryan O'Sullivan
ipath uses skb functions and won't build without CONFIG_NET. Spotted by Randy Dunlap. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-20Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Clear high octet in QP number
2006-11-16IPoIB: Clear high octet in QP numberMichael S. Tsirkin
IPoIB assumes that high (reserved) octet in the hardware address is 0, and copies it into the QPN. This violates RFC 4391 (which requires that the high 8 bits are ignored on receive), and will result in an invalid QPN being used when interoperating with IPoIB connected mode. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-16[PATCH] IB/ipath - fix driver build for platforms with PCI, but not HTBryan O'Sullivan
The PCI Express and Hypertransport chip-specific source files should only be built when the kernel has the capability of actually compiling them. This fixes the driver build on, for example, ia64. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Fix race between cancel and receive completion RDMA/amso1100: Fix && typo RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device IB/ehca: Activate scaling code by default IB/ehca: Use named constant for max mtu IB/ehca: Assure 4K alignment for firmware control blocks
2006-11-13IB/mad: Fix race between cancel and receive completionRoland Dreier
When ib_cancel_mad() is called, it puts the canceled send on a list and schedules a "flushed" callback from process context. However, this leaves a window where a receive completion could be processed before the send is fully flushed. This is fine, except that ib_find_send_mad() will find the MAD and return it to the receive processing, which results in the sender getting both a successful receive and a "flushed" send completion for the same request. Understandably, this confuses the sender, which is expecting only one of these two callbacks, and leads to grief such as a use-after-free in IPoIB. Fix this by changing ib_find_send_mad() to return a send struct only if the status is still successful (and not "flushed"). The search of the send_list already had this check, so this patch just adds the same check to the search of the wait_list. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13RDMA/amso1100: Fix && typoJean Delvare
Fix the AMSO1100 firmware version computation, which was broken due to "&&" being used where "&" should have. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_deviceTom Tucker
Rework some load-time error handling: c2_register_device() leaked when it failed, and the function that called it didn't check the return code. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13IB/ehca: Activate scaling code by defaultHoang-Nam Nguyen
Change ehca's Kconfig to activates scaling code as default. After several measurements we saw that this feature prevents dropped packets (UD) in stress situation. Thus, enabling it helps to improve ehca's bandwidth through IPoIB. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13IB/ehca: Use named constant for max mtuHoang-Nam Nguyen
Define and use a constant EHCA_MAX_MTU instead hardcoded value. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-09IB/ehca: Assure 4K alignment for firmware control blocksHoang-Nam Nguyen
Assure 4K alignment for firmware control blocks in 64K page mode, because kzalloc()'s result address might not be 4K aligned if 64K pages are enabled. Thus, we introduce wrappers called ehca_{alloc,free}_fw_ctrlblock(), which use a slab cache for objects with 4K length and 4K alignment in order to alloc/free firmware control blocks in 64K page mode. In 4K page mode those wrappers just are defines of get_zeroed_page() and free_page(). Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-08[PATCH] IB/ipath - program intconfig register using new HT irq hookBryan O'Sullivan
Eric's changes to the htirq infrastructure require corresponding modifications to the ipath HT driver code so that interrupts are still delivered properly. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-02RDMA/addr: Use client registration to fix module unload raceSean Hefty
Require registration with ib_addr module to prevent caller from unloading while a callback is in progress. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-31IB/mthca: Fix MAD extended header format for MAD_IFC firmware commandMichael S. Tsirkin
Several fields in an incoming MAD extended info header were passed into the MAD_IFC firmware command at incorrect offsets (mostly off by 4 bytes). As the result, the HCA will fail to generate traps in which this info is needed (e.g. traps which include the GRH of the incoming packet), in violation of the IB spec. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30IB/uverbs: Return sq_draining value in query_qp responseJack Morgenstein
Return the sq_draining value back to user space for query_qp instead of the en_sqd_async notify value, which is valid only for modify_qp. For query_qp, the draining status should returned. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30IB/amso1100: Fix incorrect pr_debug()Steve Wise
pr_debug() was printing the wrong stuff. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30IB/amso1100: Use dma_alloc_coherent() instead of kmalloc/dma_map_singleSteve Wise
The Ammasso driver needs to use dma_alloc_coherent() for allocating memory that will be used by the HW for dma. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30IB/ehca: Fix eHCA driver compilation for uniprocessorPaul Mackerras
The eHCA driver does not compile for a uniprocessor configuration (CONFIG_SMP=n), due to H_SUCCESS and other symbols being undefined. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Hoang-Nam Nguyen <HNGUYEN@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30RDMA/cma: rdma_bind_addr() leaks a cma_dev reference countKrishna Kumar
rdma_bind_addr() leaks a cma_dev reference count in failure case. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2006-10-30IB/iser: Start connection after enabling iSERErez Zilber
When a connection is started (a new connection or a recovered one), iSER should prepare its resources for full-featured mode and only then notify the iSCSI layer that it is ready to start queueing commands. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16IB/mthca: Use mmiowb after doorbell ringArthur Kepner
We discovered a problem when running IPoIB applications on multiple CPUs on an Altix system. Many messages such as: ib_mthca 0002:01:00.0: SQ 000014 full (19941644 head, 19941707 tail, 64 max, 0 nreq) appear in syslog, and the driver wedges up. Apparently this is because writes to the doorbells from different CPUs reach the device out of order. The following patch adds mmiowb() calls after doorbell rings to ensure the doorbell writes are ordered. Signed-off-by: Arthur Kepner <akepner@sgi.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16IB/ipath: Initialize diagpkt file on device init onlyRobert Walsh
Don't attempt to set up the diagpkt device in the module init code. Instead, wait until a piece of hardware is initialized. Fixes a problem when loading the ib_ipath module when no InfiniPath hardware is present: modprobe would go into the D state and stay there. Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16RDMA/amso1100: Fix a NULL dereference in error pathAdrian Bunk
This patch fixes a NULL dereference spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16RDMA/amso1100: pci_module_init() conversionHenrik Kretzschmar
pci_module_init() convertion in amso1100 driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10IB/mthca: Fix off-by-one in mthca SRQ creationMichael S. Tsirkin
All HCAs (not just mem-free) need a spare SRQ entry, so bump srq->max by 1 in all cases. Noted by Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10IPoIB: Check for DMA mapping error for TX packetsRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10RDMA/amso1100: Fix build with debugging offRoland Dreier
Since pr_debug() has changed from a macro to an inline function when DEBUG is not defined, its arguments now need to be defined even when debugging is off. Therefore to_event_str() and to_qp_state_str() need to be moved out of #ifdef DEBUG. The compiler will throw the definitions away if DEBUG is not defined, but it needs to be able to see that the functions exist. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10IB/cm: Send DREP in response to unmatched DREQSean Hefty
Currently a DREP is only sent in response to a DREQ if a connection has been found matching the DREQ, and it is in the proper state. Once a DREP is sent, the local connection moves into timewait. Duplicate DREQs received while in this state result in re-sending the DREP. However, it's likely that the local connection will enter and exit timewait before the remote side times out a lost DREP and resends a DREQ. To handle this, we send a DREP in response to a DREQ, even if a local connection is not found. This avoids maintaining disconnected id's in timewait states for excessively long times, just to handle a lost DREP. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10IB/cm: Fix timewait crash after module unloadSean Hefty
If the ib_cm module is unloaded while id's are still in timewait, the CM will destroy the work queue used to process timewait. Once the id's exit timewait, their timers will fire, leading to a crash trying to access the destroyed work queue. We need to track id's that are in timewait, and cancel their deferred work on module unload. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10IB/mthca: Query port fixJack Morgenstein
Fill in "max_vl_num" (encoded according to VLCap field in the PortInfo MAD) and "init_type_reply" values in the ib_query_port() verb. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10IB/srp: Enable multiple connections to the same targetIshai Rabinovitz
Enable multiple concurrent connections to the same SRP target: 1) Use port GUID instead of node GUID in the initiator port identifier. This allows connections to be made from multiple HCA ports at the same time. 2) Let the user specify the identifier extention when adding the device. This allows userspace to make multiple connections even from the same port, if it wants too. Without this, only one connection can be made from any given HCA, even if it has multiple ports, because we don't use multi-channel mode, so targets will only allow one connection from a given initiator port ID. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10IB/srp: Remove redundant memset()Ishai Rabinovitz
scsi_host_alloc() already allocates with kzalloc(), so the struct Scsi_Host is zeroed out, including the private data portion. Remove the redundant memset that zeros this out again in the SRP initiator. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10RDMA/amso1100: Add spinlocks to serialize ib_post_send/ib_post_recvTom Tucker
The AMSO driver was not thread-safe in the post WR code and had code that would sleep if the WR post FIFO was full. Since these functions can be called on interrupt level I changed the sleep to a udelay. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-03Still more typo fixesMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-02IB/ehca: Tweak trace message formatHoang-Nam Nguyen
Add an extra space to make things more readable. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02IB/ehca: Fix device registrationHoang-Nam Nguyen
Move the call to ib_register_device() later, since a device should not be registered until it is completely read to be used. This fixes crashes that occur if an upper-layer driver such as IPoIB is loaded before the ehca module. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02IB/ipath: Fix RDMA readsRalph Campbell
The PSN used to generate the request following a RDMA read was incorrect and some state booking wasn't maintained correctly. This patch fixes that. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
2006-10-02RDMA/cma: Optimize error handlingKrishna Kumar
Reorganize code relating to cma_get_net_info() and rdam_create_id() to optimize error case handling (no need to alloc memory/etc. as part of rdma_create_id() if input parameters are wrong). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Eliminate unnecessary remove_listKrishna Kumar
Eliminate remove_list by using list_del_init() instead during device removal handling. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Set status correctly on route resolution errorSean Hefty
On reporting a route error, also include the status for the error, rather than indicating a status of 0 when an error has occurred. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Fix device removal raceKrishna Kumar
The race is as follows: A process : cma_process_remove() calls cma_remove_id_dev(), which sets id state to CMA_DEVICE_REMOVAL and calls wait_event(dev_remove). B process : cma_req_handler() had incremented dev_remove, and calls cma_acquire_ib_dev() and on failure calls cma_release_remove(), which does a wake_up of cma_process_remove(). Then cma_req_handler() calls rdma_destroy_id(); A Process : cma_remove_id_dev() gets woken and checks the state of id, and since it is still (wrongly) CMA_DEVICE_REMOVAL, it calls notify_user(id) and if that fails, the caller - cma_process_remove() calls rdma_destroy_id(id). Two processes can call rdma_destroy_id(), resulting in one de-referencing kfreed id_priv. Fix is for process B to set CMA_DESTROYING in cma_req_handler() so that process A will return instead of doing a rdma_destroy_id(). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Fix leak of cm_ids in case of failuresKrishna Kumar
cma_connect_ib() and cma_connect_iw() leak cm_id's in failure cases. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02[PATCH] namespaces: utsname: use init_utsname when appropriateSerge E. Hallyn
In some places, particularly drivers and __init code, the init utsns is the appropriate one to use. This patch replaces those with a the init_utsname helper. Changes: Removed several uses of init_utsname(). Hope I picked all the right ones in net/ipv4/ipconfig.c. These are now changed to utsname() (the per-process namespace utsname) in the previous patch (2/7) [akpm@osdl.org: CIFS fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] r/o bind mount prepwork: inc_nlink() helperDave Hansen
This is mostly included for parity with dec_nlink(), where we will have some more hooks. This one should stay pretty darn straightforward for now. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (33 commits) IB/ipath: Fix lockdep error upon "ifconfig ibN down" IB/ipath: Fix races with ib_resize_cq() IB/ipath: Support new PCIE device, QLE7142 IB/ipath: Set CPU affinity early IB/ipath: Fix EEPROM read when driver is compiled with -Os IB/ipath: Fix and recover TXE piobuf and PBC parity errors IB/ipath: Change HT CRC message to indicate how to resolve problem IB/ipath: Clean up module exit code IB/ipath: Call mtrr_del with correct arguments IB/ipath: Flush RWQEs if access error or invalid error seen IB/ipath: Improved support for PowerPC IB/ipath: Drop unnecessary "(void *)" casts IB/ipath: Support multiple simultaneous devices of different types IB/ipath: Fix mismatch in shifts and masks for printing debug info IB/ipath: Fix compiler warnings and errors on non-x86_64 systems IB/ipath: Print more informative parity error messages IB/ipath: Ensure that PD of MR matches PD of QP checking the Rkey IB/ipath: RC and UC should validate SLID and DLID IB/ipath: Only allow complete writes to flash IB/ipath: Count SRQs properly ...
2006-09-28[IPV4]: annotate inetdev.h helpersAl Viro
inet_confirm_addr(), inet_ifa_byprefix(), ip_dev_find(), inet_make_mask() and inet_ifa_match() annotated, along with inferred net-endian variables Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28IB/ipath: Fix lockdep error upon "ifconfig ibN down"Bryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Fix races with ib_resize_cq()Bryan O'Sullivan
The resize CQ function changes the memory used to store the queue. Other routines need to honor the lock before accessing the pointer to the queue and verify that the head and tail are in range. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>