aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2008-01-24Kobject: convert drivers/* from kobject_unregister() to kobject_put()Greg Kroah-Hartman
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Infiniband: make ipath driver use default driver groups.Greg Kroah-Hartman
Make the ipath driver use the new driver functions so that it does not touch the sysfs portion of the driver structure. We also remove the redundant symlink from the device back to the driver, as it is already in the sysfs tree. Any userspace tools should be using the standard symlink, not some driver specific one. Cc: Roland Dreier <rdreier@cisco.com> Cc: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: Arthur Jones <arthur.jones@qlogic.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: change drivers/infiniband to use kobject_init_and_addGreg Kroah-Hartman
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <mshefty@ichips.intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-16IB/ipath: Fix receiving UD messages with immediate dataRalph Campbell
This fixes a small bug in ipath_ud_rcv()'s handling of UD messages with immediate data. We need to test whether immediate data is present and update the header size accordingly *before* testing the packet size from the header against the actual received length. Otherwise the wrong header size will be used and all messages with immediate data will be dropped. This bug keeps MVAPICH-UD and HP MPI from working at all on ipath devices. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-08IB/srp: Release transport before removing hostDave Dillow
The documented call sequence for removing a host is to call the transport xxx_remove_host() prior to scsi_remove_host(). The SRP transport used to crash when that order was followed, but as it is now fixed, use the documented order. Signed-off-by: David Dillow <dillowda@ornl.gov> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-08IB/mlx4: Fix value of pkey_index in QP1 completionsDotan Barak
Fix the value of pkey_index in completions to get a valid value for GSI QPs. Without this fix, incoming GSI packets on port 2 get an invalid P_Key index in the completion, which prevents the MAD layer from sending back a response, which can make the second port of ConnectX HCAs completely useless. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-03IB/srp: Fix list corruption/oops on module reloadDavid Dillow
Add a missing call to srp_remove_host() in srp_remove_one() so that we don't leak SRP transport class list entries. Tested-by: David Dillow <dillowda@ornl.gov> Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-13IB/ehca: Fix lock flag variable location, bump version numberJoachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-12IB/ehca: Serialize HCA-related hCalls if necessaryJoachim Fenkes
Several pSeries firmware versions share a rare locking issue in the HCA-related hCalls. Check for a feature flag that indicates the issue being fixed and serialize all HCA hCalls if not. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-12IB/ehca: Return correct number of SGEs for SRQJoachim Fenkes
Firmware would round up the number of SGEs to four, because the WQE structure holds four SGEs. For SRQ, only three are supported, so return a fixed value instead. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-30IB/ehca: Fix static rate if path faster than linkJoachim Fenkes
The formula would yield -1 if the path is faster than the link, which is wrong in a bad way (max throttling). Clamp to 0, which is the correct value. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-27IPoIB: Fix oops if xmit is called when priv->broadcast is NULLJack Morgenstein
If a port goes down, ipoib_ib_dev_down() is invoked -- which flushes the mcasts (clearing priv->broadcast) and clearing the path record cache. If ipoib_start_xmit() is then invoked (before the broadcast group is rejoined), a kernel oops results from attempting to access priv->broadcast, which is still unset. Returning NULL from path_rec_create() if priv->broadcast is NULL is a harmless way of bypassing the problem -- the offending packet is simply discarded "without prejudice." Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-24IB/iser: Add missing counter increment in iser_data_buf_aligned_len()Erez Zilber
While adding sg chaining support to iSER, a "for" loop was replaced with a "for_each_sg" loop. The "for" loop included the incrementation of 2 variables. Only one of them is incremented in the current "for_each_sg" loop. This caused iSER to think that all data is unaligned, and all data was copied to aligned buffers. This patch increments the missing counter inside the "for_each_sg" loop whenever necessary. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-24IB/ehca: Fix static rate regressionJoachim Fenkes
Wrong choice of port number caused modify_qp() to fail -- fixed. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20IB/ipath: Normalize error return codes for posting work requestsRalph Campbell
The error codes for ib_post_send(), ib_post_recv(), and ib_post_srq_recv() were inconsistent. Use EINVAL for too many SGEs and ENOMEM for too many WRs. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20IB/ipath: Fix offset returned to ibv_modify_srq()Ralph Campbell
The wrong offset was being returned to libipathverbs so that when ibv_modify_srq() calls mmap(), it always fails. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20IB/ipath: Fix error path in QP creationRalph Campbell
This patch fixes the code which frees the partially allocated QP resources if there was an error while creating the QP. In particular, the QPN wasn't deallocated and the QP wasn't removed from the hash table. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20IB/ipath: Fix offset returned to ibv_resize_cq()Ralph Campbell
The wrong offset was being returned to libipathverbs so that when ibv_resize_cq() calls mmap(), it always fails. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13RDMA/cxgb3: Set the max_qp_init_rd_atom attribute in query_deviceSteve Wise
The device attribute max_qp_init_rd_atom is not getting set in cxgb3's query_device method. Version 1.0.4 of librdmacm now validates the user's requested initiator and responder resources against the max supported by the device. Since iw_cxgb3 wasn't setting this attribute (and it defaulted to 0), all rdma_connect()s fail if there are initiator resources requested by the app. Fix this by setting the correct value in iwch_query_device(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13IB/ehca: Fix static rate calculationJoachim Fenkes
The IPD (inter-packet delay) formula was a little off and assumed a fixed physical link rate; fix the formula and query the actual physical link rate, now that we can get it. Also, refactor the calculation into a common function ehca_calc_ipd() and use that instead of duplicating code. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13IB/ehca: Return physical link information in query_port()Joachim Fenkes
Newer firmware versions return physical port information to the partition, so hand that information to the consumer if it's present. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13IB/ipath: Fix race with ACK retry timeout list managementRalph Campbell
When an ACK is received, the QP is removed from the timeout list and then if there are still pending send WQEs, the QP is put back on the timeout list. It is possible that another post send has put the QP on the timeout list thus, a check needs to be made before trying to do it again or the list is corrupted. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13IB/ipath: Fix memory leak in ipath_resize_cq() if copy_to_user() failsRalph Campbell
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Patrick Marchand Latifi <patrick.latifi@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/fmr_pool: Stop ib_fmr threads from contributing to load average IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument) IB/ipath: Limit length checksummed in eeprom IB/ipath: Fix a race where s_last is updated without lock held IB/mlx4: Lock SQ lock in mlx4_ib_post_send() IPoIB/cm: Fix receive QP cleanup
2007-10-30IB/fmr_pool: Stop ib_fmr threads from contributing to load averageAnton Blanchard
I noticed my machine was at a constant load average of 1. This was because ib_create_fmr_pool calls kthread_create but does not immediately wake the thread up. Change to using kthread_run so we enter ib_fmr_cleanup_thread(), set TASK_INTERRUPTIBLE, then go to sleep. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument)Dave Olson
Inside a function declared as void foo(char bar[512]) the value of sizeof bar is the size of a pointer, not 512. So avoid constructions like this by passing the size explicitly. Also reduce the size of the buffer to 128 bytes (512 was overly generous). Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/ipath: Limit length checksummed in eepromMichael Albaugh
The small eeprom that holds the GUID etc. contains a data-length, but if the actual eeprom is new or has been erased, that byte will be 0xFF, which is greater than the maximum physical length of the eeprom, and more importantly greater than the length of the buffer we vmalloc'd. Sanity-check the length to avoid the possbility of reading past end of buffer. Signed-off-by: Michael Albaugh <Michael.Albaugh@Qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/ipath: Fix a race where s_last is updated without lock heldRalph Campbell
There is a small window where a send work queue entry could be overwritten by ib_post_send() because s_last is updated before the entry is read. This patch closes the window by acquiring the lock and updating the last send work queue entry index after reading the wr_id. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/mlx4: Lock SQ lock in mlx4_ib_post_send()Roland Dreier
Because of a typo, mlx4_ib_post_send() takes the same lock rq.lock as mlx4_ib_post_recv(). Correct the code so the intended sq.lock is taken when posting a send. Noticed by Yossi Leybovitch and pointed out by Jack Morgenstein from Mellanox. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-26IPoIB/cm: Fix receive QP cleanupRoland Dreier
Commit 1b524963 ("IPoIB/cm: Use common CQ for CM send completions") changed how the high-order bits of work request IDs were used, which had the effect that IPOIB_CM_RX_DRAIN_WRID was no longer handled as a connected mode receive completion. This leads to the messages ib1: cm send completion event with wrid 1073741823 (> 64) ib1: RX drain timing out when an interface with connected mode QPs is brought down. Fix this by making sure that both IPOIB_OP_CM and IPOIB_OP_RECV are set in IPOIB_CM_RX_DRAIN_WRID. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-24SG: Change sg_set_page() to take length and offset argumentJens Axboe
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Increase command timeout for INIT_HCA to 10 seconds IPoIB/cm: Use common CQ for CM send completions IB/uverbs: Fix checking of userspace object ownership IB/mlx4: Sanity check userspace send queue sizes IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))" IB/ehca: Enable large page MRs by default IB/ehca: Change meaning of hca_cap_mr_pgsize IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr() IB/ehca: Fix masking error in {,re}reg_phys_mr() IB/ehca: Supply QP token for SRQ base QPs IPoIB: Use round_jiffies() for ah_reap_task RDMA/cma: Fix deadlock destroying listen requests RDMA/cma: Add locking around QP accesses IB/mthca: Avoid alignment traps when writing doorbells mlx4_core: Kill mlx4_write64_raw()
2007-10-23IB/ehca: Fix sg_page() falloutOlof Johansson
More fallout from sg_page changes: drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user1': drivers/infiniband/hw/ehca/ehca_mrmw.c:1779: error: 'struct scatterlist' has no member named 'page' drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_check_kpages_per_ate': drivers/infiniband/hw/ehca/ehca_mrmw.c:1835: error: 'struct scatterlist' has no member named 'page' drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user2': drivers/infiniband/hw/ehca/ehca_mrmw.c:1870: error: 'struct scatterlist' has no member named 'page' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-19IPoIB/cm: Use common CQ for CM send completionsMichael S. Tsirkin
Use the same CQ for CM send completions as for all other IPoIB completions. This means all completions are processed via the same NAPI polling routine. This should help reduce the number of interrupts for bi-directional traffic (such as TCP) and fixes "driver is hogging interrupts" errors reported for IPoIB send side, e.g. <https://bugs.openfabrics.org/show_bug.cgi?id=508> To do this, keep a per-interface counter of outstanding send WRs, and stop the interface when this counter reaches the send queue size to avoid CQ overruns. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-19IB/uverbs: Fix checking of userspace object ownershipRoland Dreier
Commit 9ead190b ("IB/uverbs: Don't serialize with ib_uverbs_idr_mutex") rewrote how userspace objects are looked up in the uverbs module's idrs, and introduced a severe bug in the process: there is no checking that an operation is being performed by the right process any more. Fix this by adding the missing check of uobj->context in __idr_get_uobj(). Apparently everyone is being very careful to only touch their own objects, because this bug was introduced in June 2006 in 2.6.18, and has gone undetected until now. Cc: stable <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-18[INET]: Justification for local port range robustness.Anton Arapov
There is a justifying patch for Stephen's patches. Stephen's patches disallows using a port range of one single port and brakes the meaning of the 'remaining' variable, in some places it has different meaning. My patch gives back the sense of 'remaining' variable. It should mean how many ports are remaining and nothing else. Also my patch allows using a single port. I sure we must be able to use mentioned port range, this does not restricted by documentation and does not brake current behavior. usefull links: Patches posted by Stephen Hemminger http://marc.info/?l=linux-netdev&m=119206106218187&w=2 http://marc.info/?l=linux-netdev&m=119206109918235&w=2 Andrew Morton's comment http://marc.info/?l=linux-kernel&m=119248225007737&w=2 1. Allows using a port range of one single port. 2. Gives back sense of 'remaining' variable. Signed-off-by: Anton Arapov <aarapov@redhat.com> Acked-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18IB/mlx4: Sanity check userspace send queue sizesJack Morgenstein
Add sanity checks to send queue sizes passed in from userspace. The minimum sq stride value below is taken from the MT25408 PRM (section 11.10, Table 306, log_sq_stride definition). Without this check, userspace can submit arbitrarily large/small values for the number of WQEs and the stride, which can crash the kernel. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))"Roland Dreier
It's too hard to figure out what "!likely(...)" really means, and who knows how compilers interpret the hint. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Enable large page MRs by defaultJoachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Change meaning of hca_cap_mr_pgsizeJoachim Fenkes
ehca_shca.hca_cap_mr_pgsize now contains all supported page sizes ORed together. This makes some checks easier to code and understand, plus we can return this value verbatim in query_hca(), fixing a problem with SRP (reported by Anton Blanchard -- thanks!). Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr()Joachim Fenkes
Simplify ehca_encode_hwpage_size(), fixing an infinite loop for pgsize == 0 in the process. Fix the bug in alloc_fmr() that triggered the loop. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Fix masking error in {,re}reg_phys_mr()Joachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Supply QP token for SRQ base QPsJoachim Fenkes
Because hardware reports the SRQ token in RWQEs of SRQ base QPs, supply the base QP token as SRQ token, so we can properly find the SRQ base QP. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17[POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and ↵Joachim Fenkes
eHEA drivers Replace struct ibmebus_dev and struct ibmebus_driver with struct of_device and struct of_platform_driver, respectively. Match the external ibmebus interface and drivers using it. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-16IPoIB: Use round_jiffies() for ah_reap_taskAnton Blanchard
Use round_jiffies() to align the 1 second ah_reap_task with other work and potentially save power by sleeping cores for longer. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16RDMA/cma: Fix deadlock destroying listen requestsSean Hefty
Deadlock condition reported by Kanoj Sarcar <kanoj@netxen.com>. The deadlock occurs when a connection request arrives at the same time that a wildcard listen is being destroyed. A wildcard listen maintains per device listen requests for each RDMA device in the system. The per device listens are automatically added and removed when RDMA devices are inserted or removed from the system. When a wildcard listen is destroyed, rdma_destroy_id() acquires the rdma_cm's device mutex ('lock') to protect against hot-plug events adding or removing per device listens. It then tries to destroy the per device listens by calling ib_destroy_cm_id() or iw_destroy_cm_id(). It does this while holding the device mutex. However, if the underlying iw/ib CM reports a connection request while this is occurring, the rdma_cm callback function will try to acquire the same device mutex. Since we're in a callback, the ib_destroy_cm_id() or iw_destroy_cm_id() calls will block until their callback thread returns, but the callback is blocked waiting for the device mutex. Fix this by re-working how per device listens are destroyed. Use rdma_destroy_id(), which avoids the deadlock, in place of cma_destroy_listen(). Additional synchronization is added to handle device hot-plug events and ensure that the id is not destroyed twice. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16RDMA/cma: Add locking around QP accessesSean Hefty
If a user allocates a QP on an rdma_cm_id, the rdma_cm will automatically transition the QP through its states (RTR, RTS, error, etc.) While the QP state transitions are occurring, the QP itself must remain valid. Provide locking around the QP pointer to prevent its destruction while accessing the pointer. This fixes an issue reported by Olaf Kirch from Oracle that resulted in a system crash: "An incoming connection arrives and we decide to tear down the nascent connection. The remote ends decides to do the same. We start to shut down the connection, and call rdma_destroy_qp on our cm_id. ... Now apparently a 'connect reject' message comes in from the other host, and cma_ib_handler() is called with an event of IB_CM_REJ_RECEIVED. It calls cma_modify_qp_err, which for some odd reason tries to modify the exact same QP we just destroyed." Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16infiniband: sg chaining supportJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>