aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2009-08-27Input: tosakbd - fix cleaning up KEY_STROBEs after errorRoel Kluin
Direct to fail2 to gpio_free() the KEY_STROBEs as well as the KEY_SENSEs. [dtor@mail.ru: change keymap from unsigned int to unsigned short] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-27Input: joydev - validate axis/button maps before clobbering current onesStephen Kitt
Up to now axis and button map validation was done after the user-supplied values were copied over the driver's map. This patch copies the user-supplied values into temporary buffers and validated them before overwriting the driver's permanent maps. Also change JSIOCGBTNMAP and JSIOCGAXMAP to return number of bytes returned to userspace instead of 0. Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-27Merge commit 'v2.6.31-rc8' into nextDmitry Torokhov
2009-08-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ucb1400_ts - enable interrupt unconditionally Input: ucb1400_ts - enable ADC Filter Input: wacom - don't use on-stack memory for report buffers Input: iforce - support new revision of ACT LABS Force RS Input: joydev - decouple axis and button map ioctls from input constants
2009-08-21Input: ucb1400_ts - enable interrupt unconditionallyPavel Revak
Sometimes, when using the touchscreen, it stops working till next restart and the following message is printed: ucb1400: unexpected IE_STATUS = 0x0 The following patch retriggers the touchscreen interrupt unconditionally. This prevents hanging of the touchscreen in case of bogus interrupt occurence. Signed-off-by: Pavel Revak <palo@bielyvlk.sk> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-21Input: ucb1400_ts - enable ADC FilterMarek Vasut
This patch enables ADC filtering on UCB1400 codec by default. The benefit from this change is mostly on some Colibri boards where the ADCSYNC pin of the UCB1400 codec isn't connected causing the touchscreen to jitter very badly. This change has no visible effect on boards where the ADCSYNC pin is connected. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Palo Revak <palo@bielyvlk.sk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-21Input: wacom - don't use on-stack memory for report buffersDmitry Torokhov
Tested-by: Martin Capitanio <martin@capitanio.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-20Input: xpad - add USB ID for the drumkit controller from Rock BandCorbin Simpson
Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-20Input: w90p910_keypad - rename driver name to match platformWan ZongShun
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19Input: iforce - support new revision of ACT LABS Force RSJiri Kosina
Reported-by: cemede@gmail.com Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19Input: add new driver for Sentelic Finger Sensing PadTai-hwa Liang
This is the driver for Sentelic Finger Sensing Pad which can be found on MSI WIND Netbook. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19Input: psmouse - allow defining read-only attributesDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-12Input: joydev - decouple axis and button map ioctls from input constantsStephen Kitt
The KEY_MAX change in 2.6.28 changed the values of the JSIOCSBTNMAP and JSIOCGBTNMAP constants; software compiled with the old values no longer works with kernels following 2.6.28, because the ioctl switch statement no longer matches the values given by the software. This patch handles these ioctls independently of the length of data specified, and applies the same treatment to JSIOCSAXMAP and JSIOCGAXMAP which currently depend on ABS_MAX. Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-12Input: eeti_ts - allow active high irq linesDaniel Mack
This adds a struct eeti_ts_platform_data which currently holds only one value to specify the interrupt polarity. The driver has a fallback if no platform data is passed in via the i2c_board_info, so no regression is caused. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: w90p910_keypad - adjust to use definitions from matrix_keypad.hDmitry Torokhov
Also have the driver send MSC_SCAN events as most keyboards do to aid in updating keymap from userspace. Tested-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: add keypad driver for w90p910Wan ZongShun
Add keypad driver for the 4x4 keypad on an evaluation board based on w90p910. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Reviewed-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: combine hil_kbd and hil_ptr driversDmitry Torokhov
hil_kbd and hil_ptr look like twins so it makes sense to combine them into a single driver. [deller@gmx.de: add MODULE_ALIAS() entry for mouse] Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: hil_kbd - prepare for merging with hil_ptrDmitry Torokhov
Rename functions and variables from [hil_]kbd to [hil_]dev in preparation of merging hil_kbd and hil_ptr. Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: hil_kbd - switch to use completion instead of semaphoreDmitry Torokhov
Stop abusing semaphore for waiting, use completion instead. Also handle errors from input_register_device. Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-08Input: wistron_btns - switch to using dev_pm_opsDmitry Torokhov
Also start using 'bool' where it makes sense. Tested-by: Giuseppe Mazzotta <g.mazzotta@iragan.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: matrix_keypad - make matrix keymap size dynamic Input: wistron_btns - support Prestigio Wifi RF kill button Input: i8042 - add Asus G1S to noloop exception list
2009-08-05Input: matrix_keypad - make matrix keymap size dynamicEric Miao
Remove assumption on the shift and size of rows/columns form matrix_keypad driver. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: wistron_btns - support Prestigio Wifi RF kill buttonTJ
The Prestigio 157, an old no-name clone laptop uses input keys very similar to the Wistron 1557/MS2141 with the addition of BIOS-controlled wireless radio frequency kill switch. This patch adds support for the RF kill switch control and adds manual identification of the model. The Prestigio does not expose any recognisable identity via dmidecode and so requires manual selection at module init using force=1 keymap=prestigio Signed-off-by: TJ <ubuntu@tjworld.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: serio - don't use serio->write() directlyDmitry Torokhov
We have a nice wrapper for that. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: hgpk - forced recalibration for the OLPC touchpadPaul Fox
The OLPC XO laptop incorporates a combination touchpad/tablet device which unfortunately requires frequent recalibration. The driver will force this automatically when various suspicious behaviors are observed, and the user can recalibrate manually (with a special keyboard sequence). There's currently no way, however, for an external program to cause recalibration. We can not use the reconnect capability which is already available in /sys because full reset of the touchpad takes 1.1 - 1.2 secons which is too long. This patch creates a new node in /sys which, when written with '1', will force a touchpad recalibration; no other writes (or reads) of this node are supported. Signed-off-by: Paul Fox <pgf@laptop.org> Acked-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: i8042 - add Asus G1S to noloop exception listJory A. Pratt
The synaptic touchpad on the Asus G1S is not properly detected when rebooting machine or on cold boot from time to time. Adding the Asus G1S to the noloop exception table resolves the issue. # dmidecode 2.10 SMBIOS 2.4 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: ASUSTeK Computer Inc. Product Name: G1S Version: 1.0 Wake-up Type: Power Switch SKU Number: Family: Signed-off-by: Jory A. Pratt <geekypenguin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-04Input: tsc2007 - check if I2C communication works during probeRichard Röjfors
Check the result when sending the power down command to the controller. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-04Input: tsc2007 - make get_pendown_state platform callback optionalDmitry Torokhov
In cases when get_pendown_state callback is not available have the driver to fallback on pressure calculation to determine if the pen is up. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-02parisc: hp_sdc_mlc.c - check return value of down_trylock()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2009-07-27Input: usbtouchscreen - add support for e2i touchscreen controllerFlorian Echtler
This patch adds support for the e2i touchscreen controller used in the Mimo 740 (and probably in other e2i touchscreen products). Tested on Mimo 740. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - do not read coordinates during probeRichard Röjfors
Don't read coordinates during probe of the driver, just power down the controller and wait for interrupts. Signed-off-by: Richard Röjfors<richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - make init/exit platform hw callbacks optionalRichard Röjfors
Make init_platform_hw and exit_platform_hw callbacks optional since they are not needed on all platforms. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - properly shut off interrupts/delayed workDmitry Torokhov
Properly shut off interrupts/delayed work by free-ing IRQ first and then ensuring that enable/disable is balanced. Also add __devinit/__devexit markings, restore poll delay/period scheduling logic, make sure we call exit_platform_hw() method when probe fails. Tested-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - remove HR timerRichard Röjfors
Since it's not allowed to do synchronous I2C in the HR timer callback context we have to switch to using the global workqueue. The work is scheduled every 1ms when polling rather than 5 us. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: pxa27x_keypad - switch to using dev_pm_opsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: serio - switch to using dev_pm_opsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: i8042 - switch to using dev_pm_opsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-24Input: gpio_keys - swtich to dev_pm_opsMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-23Input: bf54x-keys - convert printk() to dev_*()Mike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-23Input: add Blackfin rotary input driverMichael Hennerich
This driver handles the Blackfin on-chip rotary peripheral. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-22Input: pxa27x_keypad - remove extra clk_disableDmitry Torokhov
clk_disable() in remove method is not needed since we already have clk_disable in pxa27x_keypad_close(). Also make sure the driver uses resource_size() and helpers from include/input/matrix_keypad.h Tested-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-22Merge commit 'v2.6.31-rc4' into nextDmitry Torokhov
2009-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add force relese key quirk for Soltech TA12 Input: fix EVIOCGNAME/JSIOCGNAME regression Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525 Input: pcspkr - switch driver to dev_pm_ops Input: xpad - don't resend successfully sent outgoing requests Input: wistron_btns - recognize Maxdata Pro 7000 notebooks
2009-07-21Input: sh_keysc - allow modifying keymap from userspaceDmitry Torokhov
Adjust the driver so EVIOCGKEYCODE/EVIOCSKEYCODE work. Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-20Input: wm97xx - add possibility to control the GPIO_STATUS shiftMarek Vasut
This patch allows tweaking the behaviour of GPIO_STATUS register shift quirk that's in wm97xx-core. The problem with GPIO_STATUS register being shifted by one doesn't appear on all hardware it seems and causes problems with accelerated touchscreen drivers on Palm hardware. Therefore an accelerated touchscreen driver can select if the shift is/isn't happening on the hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-20Input: wm97xx - add Palm support to Mainstone accelerated touchMarek Vasut
This patch refactors the Mainstone accelerated touch code a little and adds support for interrupt driven touchscreen on Palm LifeDrive, TX and Tungsten T5. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-20Input: atkbd - add force relese key quirk for Soltech TA12Jerone Young
Netbooks based on the Soltech TA12 do not send a key release for volume keys causing Linux to think the key is constantly being pressed forever. Added quirk data for forced release keys. BugLink: https://bugs.launchpad.net//bugs/397499 Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-13Input: fix EVIOCGNAME/JSIOCGNAME regressionDaniel Mack
Commit 3d5cb60e ("Input: simplify name handling for certain input handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME ioctl. Before this, patch, the platform device's name was given back to userspace which was good to identify devices. After this patch, the device is ("event%d", minor) which is not descriptive at all. This fixes the behaviour by taking dev->name. Reported-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: w90p910_ts - use clk APIWan ZongShun
Now that clk API is available on ARM we can use it in the driver. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: ucb1400_ts - fix a misleading function nameHans J. Koch
The driver for UCB1400 touchscreen controllers contains a function named ucb1400_ts_pen_down(), but it returns 0 if the pen is down and 1 if it's up. This causes confusion, especially since it's used as a boolean truth value later in the code. This patch renames it. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 04:13:37 +0000