aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2008-03-30evdev: Release eventual input device grabs when getting disconnectedBjörn Steinbrink
When getting disconnected we need to release eventual grabs on the underlying input device as we also release the input device itself. Otherwise, we would try to release the grab when the client that requested it closes its handle, accessing the input device which might already be freed. Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28ixp4xx-beeper: add MODULE_ALIASAlessandro Zummo
The following patch allows ixp4xx-beeper to be loaded by udev automatically when compiled as a module with kernel versions 2.4.24 and greater. This patch is required because 43cc71eed1250755986da4c0f9898f9a635cb3bf ("platform: prefix MODALIAS with "platform:"") changed the modalias string to have the extra prefix. LKG7102D7:~# udevinfo -a -p /sys/devices/platform/ixp4xx-beeper.4 looking at device '/devices/platform/ixp4xx-beeper.4': KERNEL=="ixp4xx-beeper.4" SUBSYSTEM=="platform" DRIVER=="" ATTR{modalias}=="platform:ixp4xx-beeper" udev therefore tries to modprobe platform:ixp4xx-beeper instead of ixp4xx-beeper. LKG7102D7:~# udevtest /sys/devices/platform/ixp4xx-beeper.4 ... import_uevent_var: import into environment: 'PHYSDEVBUS=platform' import_uevent_var: import into environment: 'MODALIAS=platform:ixp4xx-beeper' main: looking at device '/devices/platform/ixp4xx-beeper.4' from subsystem 'platform' wait_for_sysfs: file '/sys/devices/platform/ixp4xx-beeper.4/bus' appeared after 0 loops main: run: 'socket:/org/kernel/udev/monitor' main: run: '/sbin/modprobe --use-blacklist platform:ixp4xx-beeper' With this patch, depmod adds an alias line (see below) to modules.alias which allows modprobe to load the right module. alias platform:ixp4xx-beeper ixp4xx-beeper Signed-off-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-18Input: ALPS - fix forward/back buttons reversed on Acer 5520-5290Laszlo Kajan
ALPS_FW_BK_1 protocol flavor seems to have forward and backward keys reversed. Signed-off-by: Laszlo Kajan <kajla@bioinfo.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-18Input: ALPS - put secondary device in proper place in sysfsDmitry Torokhov
Secondary input device did not have parent set up causing it to appear in the root of sysfs device hierarchy. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: wacom - add support for Bamboo1, BambooFun, and Cintiq 12WXPing Cheng
Add support for new wacom tablets - Bamboo1, BambooFun, and Cintiq 12WX Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: ads7846 - fix uninitialized var warningAndrew Morton
drivers/input/touchscreen/ads7846.c: In function 'ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:216: warning: 'sample' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: i8042 - add SNI RM supportThomas Bogendoerfer
SNI RM200 don't have the i8042 controller connected to the EISA bus, but have a second address range for onboard devices. This patch handles the two possible address ranges for the i8042 on SNI RMs. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: i8042 - add Lenovo 3000 N100 to nomux blacklistJiri Kosina
Lenovo 3000 N100 needs entry in nomux blacklist. Reported-by: Christopher Desjardins <cddesjardins@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: i8042 - fix warning on non-x86 buildsRoland Dreier
Commit c18bab80 ("Input: i8042 - non-x86 build fix") introduced the following warning on non-x86 builds: drivers/input/serio/i8042.c: In function 'i8042_probe': drivers/input/serio/i8042.c:1154: warning: unused variable 'param' Fix this by moving the parameter variable declaration into the #ifdef too. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: cobalt_btns - assorted fixesYoichi Yuasa
- fix compile errors (keymap is in bdev, not pdev) - cdev is no more (must use dev.parent) - update copiright notice Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-10i8042: use SGI_HAS_I8042 to select SGI i8042 handlinigThomas Bogendoerfer
Use SGI_HAS_I8042 to select SGI i8042 handling Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04input: add I2C to config since the driver makes several i2c*() callsRandy Dunlap
Add to help text that the Intel I2C ICH (i801) driver is also needed for this kernel. Add LEDS_CLASS to config since the driver makes les_classdev_*() calls: ERROR: "led_classdev_register" [drivers/input/misc/apanel.ko] undefined! ERROR: "__led_classdev_unregister" [drivers/input/misc/apanel.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08mn10300: add the MN10300/AM33 architecture to the kernelDavid Howells
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits) Input: i8042 - non-x86 build fix Input: pxa27x_keypad - also enable on PXA3xx Input: pxa27x_keypad - add debounce_interval to the keypad platform data Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ Input: pxa27x_keypad - enable rotary encoders and direct keys Input: pxa27x_keypad - introduce pxa27x_keypad_config() Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys Input: pxa27x_keypad - remove pin configuration from the driver Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard) Input: constify function pointer tables (seq_operations) Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list Input: i8042 - enable DMI quirks on x86-64 Input: i8042 - add Dritek quirk for Acer Aspire 9110 Input: add input event to APM event bridge Input: mousedev - use BIT_MASK instead of BIT Input: remove duplicate includes Input: remove cdev from input_dev structure Input: remove duplicated headers in drivers/char/keyboard.c Input: i8042 - add Dritek keyboard extension quirk Input: add Tosa keyboard driver ...
2008-02-07leds: Standardise LED naming schemeRichard Purdie
As discussed on LKML some notion of 'function' is needed in LED naming. This patch adds this to the documentation and standardises existing LED drivers. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-06Remove pointless casts from void pointersJeff Garzik
Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Merge branch 'pxa-keypad'Dmitry Torokhov
2008-02-06Input: i8042 - non-x86 build fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-02-03drivers/input/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03jonada720: remove duplicate includeAndre Haupt
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03bf54x: remove duplicate includeAndre Haupt
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03gameport: remove duplicate includeAndre Haupt
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31Input: pxa27x_keypad - also enable on PXA3xxEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - add debounce_interval to the keypad platform dataEric Miao
Currently, only one debounce_interval is introduced for both direct and matrix keys. This is true in most cases, although the keypad controller supports different debounce for direct/matrix keys. Some platforms do require this to be tuned, instead of the default reset value of 100ms. Rotary encoder will always use zero debounce time for now to achieve certain sensitivity. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQEric Miao
1. use ioremap() for registers access, this improves the portability of the driver (e.g. same IP on different processor with different I/O memory range), and make it possible to remove those registers definition in pxa-regs.h as PXA is undergoing a clean-up of that header file 2. use device specific IRQ instead of hardcoded IRQ_KEYPAD, same reason as above 3. clean up the error handling path in _probe() 4. remove DRIVER_NAME and use pdev->name when necessary, we don't actually need a constant string literals Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - enable rotary encoders and direct keysEric Miao
1. Rotary encoder events can be configured either as relative events as the legacy code does or as any specified key code, this is useful on some platform which uses the rotary keys as KEY_{UP/DOWN/LEFT/RIGHT} 2. Add support for direct keys, the corresponding keycodes for each direct key can now be specified within the platform data 3. Remove the direct/rotary key detection code from the IRQ handler to dedicated functions to improve readability Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce pxa27x_keypad_config()Eric Miao
Introduce pxa27x_keypad_config() for keypad registers configuration and remove the reg_kpc, reg_kprec from platform data structure so that configurations of keypad registers can be centralized to a single function. It can also be re-used when resuming. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce driver structure and use KEY() to define ↵Eric Miao
matrix keys 1. Introduce the "struct pxa27x_keypad" structure for driver specific information, such as "struct clk", generated matrix key codes and so on 2. Use KEY() macro to define matrix keys, instead of original 8x8 map this makes definition easier with keypad where keys are sparse 3. Keep a generated array in "struct pxa27x_keypad" for fast lookup 4. Separate the matrix scan into a dedicated function for readability and report only those keys whose state has been changed, instead of report all states 5. Make use of KPAS to decide the faster path if only one key has been detected Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - remove pin configuration from the driverEric Miao
The pin configurations will slowly be moved to the board specific code at initialization thus to make the driver more generic. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)Eric Miao
The controller should really be called keypad, and also align the naming of functions and structures to use "pxa27x_keypad" as prefix, instead of "pxakbd". Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: constify function pointer tables (seq_operations)Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux listJiri Kosina
Reported-by: Hans Aschauer <Hans.Aschauer@web.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30Input: i8042 - enable DMI quirks on x86-64Bruce Duncan
If firmware does not implement AUX_LOOP comand in 32 bit mode it is unlikely to implement it in 64 bit mode. Same goes for active multiplexing. See: http://bugzilla.kernel.org/show_bug.cgi?id=9664 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30Input: i8042 - add Dritek quirk for Acer Aspire 9110Carlos Corbacho
The Acer Aspire 9110 series also requires the Dritek quirk to enable the extra scancodes. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30Input: add input event to APM event bridgeRichard Purdie
This patch adds a very simple input power event to APM user suspend event bridge. Its currently only works for the systems using the emulated APM driver but could easily be extended to work with anything with a true APM BIOS too. This covers a standard embedded system need which is to suspend when the user presses a suspend button. It leaves options open to system integrators to ignore (or unload) this code and implement their own more complex event handling system. Its hidden behind the EMBEDDED Kconfig option since its only likely to be of use to embedded style systems. It can be built as a module so the "hardcoded" policy can easily be removed from the kernel at runtime if desired too. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30Input: mousedev - use BIT_MASK instead of BITDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-30x86: replace outb_p() with udelay(2) in drivers/input/mouse/pc110pad.cIngo Molnar
replace outb_p() with udelay(2). This is a real ISA device so it likely needs this particular delay. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-28[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfixRichard Purdie
This patch refactors the code in corgi_lcd.c moving it to the board specific corgi and spitz files where appropriate instead of the existing ifdef mess which hinders readability. Fix spitz_get_hsync_len() to call get_hsync_invperiod so pxafb can be compiled as a module. The confusing variables which represent the inverse horizintal sync period are renamed to "invperiod" consistently. An incorrect comment in corgi_ts.c is also corrected. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-21[SPARC64]: Fix section error in sparcspkrSam Ravnborg
With a sparc64 defconfig modified to set CONFIG_HOTPLUG=n the following error happened during link of vmlinux: local symbol 0: discarded in section `.devexit.text' from drivers/built-in.o local symbol 1: discarded in section `.devexit.text' from drivers/built-in.o (The error message above is from kbuild.git but it happens in mainline too) The error happens becase there is a reference from .text/.data to a function marked __devexit. With CONFIG_HOTPLUG=n all code marked __devexit are discarded and the linker complains. It was tracked down to sparcspkr.c which were missing __devexit_p() around the function pointers. Unfortunately modpost did not catch this since modpost do not warn about references from .data to .devexit from variables named *_driver. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-21Input: remove duplicate includesAndre Haupt
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: remove cdev from input_dev structureDmitry Torokhov
Cdev field was obsolete and provided only for backward compatibility since conversion of input core from class devices to regular devices. It is time to remove it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: i8042 - add Dritek keyboard extension quirkCarlos Corbacho
Some Wistron based laptops need us to explicitly enable the 'Dritek keyboard extension' to make their extra keys start generating scancodes. Originally, this was just confined to older laptops, but a few Acer laptops have turned up in 2007 that also need this again. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: add Tosa keyboard driverDmitry Baryshkov
Add keyboard support on tosa (Sharp Zaurus SL-6000x). Largely based on patches by Dirk Opfer. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: add driver for Fujitsu application buttonsStephen Hemminger
This driver supports the application buttons on some Fujitsu Lifebook laptops. It is based on the earlier apanel driver done by Jochen Eisenger, but with many changes. The original driver used ioctl's and a separate user space program (see http://apanel.sourceforge.net). This driver hooks into the input subsystem so that the normal keys act as expected without a daemon. In addition to buttons, the Mail Led is handled via LEDs class device. The driver now supports redefinable keymaps and no longer has to have a DMI table for all Fujitsu laptops. I thought about mixing this driver should be integrated into the Fujitsu laptop extras driver that handles backlight, but rejected the idea because it wasn't clear if all the Fujitsu laptops supported both. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: ads7846 - stop updating dev->power.power_stateDavid Brownell
This stops the ads7846 driver from using dev->power.power_state; that field is deprecated (overdue for removal) and the only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: drop redundant includes of moduleparam.hJulia Lawall
Drop #include <linux/moduleparam.h> in files that also include linux/module.h, since module.h includes moduleparam.h already. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: implement proper timer rounding for polled devicesStephen Hemminger
Rounding doesn't matter for the first tick, but we want succeeding ticks to be aligned on second boundary if poll interval is large enough. Also: cancel_rearming_delayed_workqueue is marked as obsolete in workqueue.h so use cancel_delayed_work_sync. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: iforce - don't access input_dev->private directlyDmitry Torokhov
input_{get|set}_drvdata() helpers should be used instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: i8042 - use synchronize_irq() instead of synchronize_sched()Dmitry Torokhov
RT guys advised me that in their kernels synchronize_sched() will not work to ensure that all IRQ handlers run to their completion and that synchronize_irq() should be used instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>