aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2006-03-25[PATCH] ads7846 build fixAndrew Morton
sparc32: drivers/input/touchscreen/ads7846.c: In function `ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:206: warning: implicit declaration of function `disable_irq' drivers/input/touchscreen/ads7846.c:208: warning: implicit declaration of function `enable_irq' Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-10[PATCH] Input: psmouse - disable autoresyncDmitry Torokhov
Automatic resynchronization in psmouse driver causes problems on some hardware so disable it by default for now. People with KVM switches that require resync can still enable it via module parameter or sysfs attribute. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15Input: kill remnants of 98kbd{,-io} and 98spkrArthur Othieno
98kbd{,-io} and 98spkr all went out with PC98 subarch. Remove stale Makefile entries that remained. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: ads7846 - assorted updatesDavid Brownell
This updates the ads7846 touchscreen driver: - to allow faster clocking (this driver doesn't push sample rates); - bugfixes the conversion of spi_transfer to lists; - some dma-unsafe command buffers are fixed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: ads7846 - convert to to dynamic input_dev allocationDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: trackpoint - enable devices connected to external portDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: logips2pp - add new signature (99)Meelis Roos
Add Logitech mouse type 99 (Premium Optical Wheel Mouse, model M-BT58, plain 3 buttons + wheel) to cure the following message: logips2pp: Detected unknown logitech mouse model 99 Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: ixp4xx-beeper - fix compile errorAlessandro Zummo
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
2006-01-31Input: iforce - fix detection of USB devicesDmitry Torokhov
Recent conversion to wait_event_interruptible_timeout() caused USB detection routine erroneously report timeouts for perfectly working devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: a3d - convert to dynamic input_dev allocationDmitry Torokhov
Also set .owner in driver structure so we'll have a link between module and driver in sysfs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: tmdc - handle errors from input_register_device()Dmitry Torokhov
Also set .owner in driver structure so we'll have a link between module and driver in sysfs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: turbografx - handle errors from input_register_device()Dmitry Torokhov
Also tgfx_remove shouldn't be marked __exit as it is also called from __init code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: gamecon - handle errors from input_register_device()Dmitry Torokhov
Also gc_remove shouldn't be marked __exit as it is also called from __init code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: gamecon - fix crash when accessing deviceDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: sidewinder - handle errors from input_register_device()Dmitry Torokhov
Also set .owner in driver structure so we'll have a link between module and driver in sysfs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: sidewinder - fix an oopsZinx Verituse
Dynalloc conversion strikes again... Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: db9 - handle errors from input_register_device()Dmitry Torokhov
Also db9_remove shouldn't be marked __exit as it is also called from __init code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: db9 - fix possible crash with Saturn gamepadsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: grip - handle errors from input_register_device()Dmitry Torokhov
Also set .owner in driver structure so we'll have a link between module and driver in sysfs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: grip - fix crash when accessing deviceDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: make needlessly global code staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: mousedev - fix memory leakKimball Murray
Apparently, "while true; do cat </dev/null >/dev/input/mice; done" causes an OOM in a short amount of time. Funny that nobody noticed, it actually is very easy to trigger just by switching between VT1 and VT7... Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: iforce - do not return ENOMEM upon successful allocationAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: psmouse - set name for Genius miceDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29Input: add ixp4xx beeper driverAlessandro Zummo
This is a driver for beeper found in LinkSys NSLU2 boxes. It should work on any ixp4xx based platform. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-19[ARM] Convert request_irq+set_irq_type to request_irq with SA_TRIGGERRussell King
There's no need to have request_irq followed by set_irq_type. Just use request_irq with the appropriate SA_TRIGGER flags. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-16[PATCH] sh: consolidate hp620/hp680/hp690 targets into hp6xxPaul Mundt
Most of the reasons for keeping these separate before was due to hp690 discontig, and since we have a workaround for that now (abusing some shadow space so everything is magically contiguous), there's no reason to keep the targets separate. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6Linus Torvalds
2006-01-14Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
2006-01-14Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
2006-01-14Input: psmouse - attempt to re-synchronize mouse every 5 secondsDmitry Torokhov
This should help driver to deal vith KVMs that reset mice when switching between boxes. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-14Input: i8042 - add Sony Vaio FSC-115b to MUX blacklistVojtech Pavlik
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-13[PATCH] spi: use linked lists rather than an arrayVitaly Wool
This makes the SPI core and its users access transfers in the SPI message structure as linked list not as an array, as discussed on LKML. From: David Brownell <dbrownell@users.sourceforge.net> Updates including doc, bugfixes to the list code, add spi_message_add_tail(). Plus, initialize things _before_ grabbing the locks in some cases (in case it grows more expensive). This also merges some bitbang updates of mine that didn't yet make it into the mm tree. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] spi: ads7836 uses spi_driverDavid Brownell
This updates the ads7864 driver to use the new "spi_driver" struct, and includes some minor unrelated cleanup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] spi: ads7846 driverDavid Brownell
This is a driver for the ADS7846 touchscreen sensor, derived from the corgi_ts and omap_ts drivers. Key differences from those two: - Uses the new SPI framework (minimalist version) - <linux/spi/ads7846.h> abstracts board-specific touchscreen info - Sysfs attributes for the temperature and voltage sensors - Uses fewer ARM-specific IRQ primitives The temperature and voltage sensors show up in sysfs like this: $ pwd /sys/devices/platform/omap-uwire/spi2.0 $ ls bus@ input:event0@ power/ temp1 vbatt driver@ modalias temp0 vaux $ cat modalias ads7846 $ cat temp0 991 $ cat temp1 1177 $ So far only basic testing has been done. There's a fair amount of hardware that uses this sensor, and which also runs Linux, which should eventually be able to use this driver. One portability note may be of special interest. It turns out that not all SPI controllers are happy issuing requests that do things like "write 8 bit command, read 12 bit response". Most of them seem happy to handle various word sizes, so the issue isn't "12 bit response" but rather "different rx and tx write sizes", despite that being a common MicroWire convention. So this version of the driver no longer reads 12 bit native-endian words; it reads 16-bit big-endian responses, then byteswaps them and shifts the results to discard the noise. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] Add serio bus_type probe and remove methodsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] Add gameport bus_type probe and remove methodsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] INPUT: add MODALIAS to the event environmentKay Sievers
input: add MODALIAS to the event environment Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-12[PATCH] m68k: namespace pollution fix (custom->amiga_custom)Al Viro
in amigahw.h custom renamed to amiga_custom, in drivers with few instances the same replacement, in the rest - #define custom amiga_custom in driver itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] ia64: task_pt_regs()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Implement is_compat_task the right wayAndi Kleen
By setting a flag during a 32bit system call only Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
2006-01-10[PATCH] TTY layer buffering revampAlan Cox
The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10Input: remove obsolete maple input driversPaul Mundt
These haven't worked in some time, and we've dropped support for the bus from the SH tree until someone shows some interest in maintaining it. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-10Input: prepare for f_ops constnessArjan van de Ven
Avoid doing assignments to a live ->fops so it can be marked as 'const'. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-10Input: wistron - do not crash if BIOS does not support interfaceMiloslav Trmac
offset can never be < 0 because it has type size_t. The driver currently oopses on insmod if BIOS does not support the interface, instead of refusing to load. Signed-off-by: Miloslav Trmac <mitr@volny.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-10Input: grip_mp - kill commented out codeDmitry Torokhov
Kill leftovers of dynalloc conversion. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-09Merge Linus' tree.Russell King
2006-01-09[ARM] Remove asm/irq.h includes from ARM driversRussell King
Many ARM drivers do not need to include asm/irq.h - remove this unnecessary include from some ARM drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>