aboutsummaryrefslogtreecommitdiff
path: root/drivers/macintosh/via-pmu.c
AgeCommit message (Collapse)Author
2007-08-25[POWERPC] Fix undefined reference to device_power_up/resumeOlaf Hering
Current Linus tree fails to link on pmac32: drivers/built-in.o: In function `pmac_wakeup_devices': via-pmu.c:(.text+0x5bab4): undefined reference to `device_power_up' via-pmu.c:(.text+0x5bb08): undefined reference to `device_resume' drivers/built-in.o: In function `pmac_suspend_devices': via-pmu.c:(.text+0x5c260): undefined reference to `device_power_down' via-pmu.c:(.text+0x5c27c): undefined reference to `device_resume' make[1]: *** [.tmp_vmlinux1] Error 1 changing CONFIG_PM > CONFIG_PM_SLEEP leads to: drivers/built-in.o: In function `pmu_led_set': via-pmu-led.c:(.text+0x5cdca): undefined reference to `pmu_sys_suspended' via-pmu-led.c:(.text+0x5cdce): undefined reference to `pmu_sys_suspended' drivers/built-in.o: In function `pmu_req_done': via-pmu-led.c:(.text+0x5ce3e): undefined reference to `pmu_sys_suspended' via-pmu-led.c:(.text+0x5ce42): undefined reference to `pmu_sys_suspended' drivers/built-in.o: In function `adb_init': (.init.text+0x4c5c): undefined reference to `pmu_register_sleep_notifier' make[1]: *** [.tmp_vmlinux1] Error 1 So change even more places from PM to PM_SLEEP to allow linking. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] via-pmu: remove LED sleep notifierJohannes Berg
The generic LED code now makes sure that suspended devices don't blink, so we no longer need to do it ourselves. For the suspend to disk case, however, we need to make sure that we don't blink if the PMU sysdev was suspended before the LED device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell
for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Rename get_property to of_get_property: partial driversStephen Rothwell
This does drivers/machintosh and the hvc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-26Revert "[POWERPC] Rename get_property to of_get_property: drivers"Paul Mackerras
This reverts commit d05c7a80cf39ae7d0f8d0c3e47c93d51fcd393d3, which included changes which should go via other subsystem maintainers.
2007-04-24[POWERPC] via-pmu: Switch to ref counting PCI APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove old interface find_devicesStephen Rothwell
Replace uses with of_find_node_by_name and for_each_node_by_name. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove old interface find_type_devicesStephen Rothwell
Replaced by of_find_node_by_type. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename get_property to of_get_property: driversStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26[POWERPC] powermac: disallow pmu sleep notifiers from aborting sleepJohannes Berg
Tracing through the code, no current PMU sleep notifier can abort sleep. Since no new PMU sleep notifiers should be added, this patch simplifies the code and removes the ability to abort sleep. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13[POWERPC] Correct AC Power: in /proc/pmu/info on ibook1Olaf Hering
/proc/pmu/info contains AC Power: 0 when booting without battery. Force AC Power, it will be updated whenever the battery state changes. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13[POWERPC] move variables in drivers/macintosh to bssOlaf Hering
Move all the initialized variables to bss. Mark a version string as const. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-12[PATCH] mark struct file_operations const 4Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@sdl.org: dvb fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] proc: remove useless (and buggy) ->nlink settingsAlexey Dobriyan
Bug: pnx8550 code creates directory but resets ->nlink to 1. create_proc_entry() et al will correctly set ->nlink for you. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Corey Minyard <minyard@acm.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-05[PATCH] Fix implicit declarations in via-pmuDave Jones
drivers/macintosh/via-pmu.c: In function 'pmac_suspend_devices': drivers/macintosh/via-pmu.c:2014: error: implicit declaration of function 'pm_prepare_console' drivers/macintosh/via-pmu.c: In function 'pmac_wakeup_devices': drivers/macintosh/via-pmu.c:2139: error: implicit declaration of function 'pm_restore_console' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits) [POWERPC] Fix rheap alignment problem [POWERPC] Use check_legacy_ioport() for ISAPnP [POWERPC] Avoid NULL pointer in gpio1_interrupt [POWERPC] Enable generic rtc hook for the MPC8349 mITX [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot [POWERPC] fix spin lock nesting in hvc_iseries [POWERPC] EEH failure to mark pci slot as frozen. [POWERPC] update powerpc defconfig files after libata kconfig breakage [POWERPC] enable sysrq in pmac32_defconfig [POWERPC] UPIO_TSI cleanup [POWERPC] rewrite mkprep and mkbugboot in sane C [POWERPC] maple/pci iomem annotations [POWERPC] powerpc oprofile __user annotations [POWERPC] cell spufs iomem annotations [POWERPC] NULL noise removal: spufs [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c [POWERPC] update mpc8349_itx_defconfig and remove some debug settings [POWERPC] Always call cede in pseries dedicated idle loop [POWERPC] Fix loop logic in irq_alloc_virt() ...
2006-10-02[POWERPC] Avoid NULL pointer in gpio1_interruptOlaf Hering
gpio1_interrupt() may dereference a NULL pointer if ioremap() fails. But, maybe no gpio interrupt happens in the first place? Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-01[PATCH] via* : switch to pci_get_device refcounted PCI APIAlan Cox
If we can clean up these remainders we can finally delete pci_find_* Signed-off-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-14Merge branch 'linux-2.6'Paul Mackerras
2006-09-01[PATCH] powerpc: More via-pmu backlight fixesBenjamin Herrenschmidt
The via-pmu backlight code (introduced in 2.6.18) has various design issues causing crashes on machines using it like the old Wallstreet powerbook (Michael, the author, never managed to test on these and I just got my hand on one of those old beasts). This fixes them by no longer trying to hijack the backlight device of the frontmost framebuffer (causing that framebuffer to crash) but having it's own local bits instead. Might look weird but it's better that way on those old machines, at least as a last-minute fix for 2.6.18. We might rework the whole thing later. This patch also changes the way it gets notified of sleep and wakeup in order to properly shut the backlight down on sleep and bring it back on wakeup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-01Merge branch 'merge'Paul Mackerras
2006-07-31[PATCH] powermac: More powermac backlight fixesMichael Hanselmann
This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31[POWERPC] powermac: Constify & voidify get_property()Jeremy Kerr
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03[POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt
This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26Input: via-pmu - add input device supportJohannes Berg
Add an input device for the button and lid switch so that userspace gets notified about the user pressing them via the standard input layer. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-06-25[PATCH] Rewritten backlight infrastructure for portable Apple computersMichael Hanselmann
This patch contains a total rewrite of the backlight infrastructure for portable Apple computers. Backward compatibility is retained. A sysfs interface allows userland to control the brightness with more steps than before. Userland is allowed to upload a brightness curve for different monitors, similar to Mac OS X. [akpm@osdl.org: add needed exports] Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-11powerpc: add context.vdso_base for 32-bit tooPaul Mackerras
This adds a vdso_base element to the mm_context_t for 32-bit compiles (both for ARCH=powerpc and ARCH=ppc). This fixes the compile errors that have been reported in arch/powerpc/kernel/signal_32.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27[PATCH] Notifier chain update: API changesAlan Stern
The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] powerpc: via-pmu warning fixAndrew Morton
drivers/macintosh/via-pmu.c:164: warning: `sleep_in_progress' defined but not used Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23[PATCH] powerpc: make powerbook_sleep_grackle staticOlaf Hering
powerbook_sleep_grackle is only called inside via-pmu, from pmu_ioctl() Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-14[PATCH] macintosh: correct AC Power info in /proc/pmu/infoBenjamin Herrenschmidt
Report AC Power present in /proc/pmu/info if there is no battery. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] 3/5 powerpc: Add platform functions interpreterBenjamin Herrenschmidt
This is the platform function interpreter itself along with the backends for UniN/U3/U4, mac-io, GPIOs and i2c. It adds the ability to execute those do-platform-* scripts in the device-tree (at least for most devices for which a backend is provided). This should replace the clock spreading hacks properly. It might also have an impact on all sort of machines since some of the scripts marked "at init" will now be executed on boot (or some other on sleep/wakeup), those will possibly do things that the kernel didn't do at all, like setting some values into some i2c devices (changing thermal sensor calibration or conversion rate) etc... Thus regression testing is MUCH welcome. Also loook for errors in dmesg. That's also why I've left rather verbose debugging enabled in this version of the patch. (I do expect some Windtunnel G4s to show some errors as they have an i2c clock chip on the PMU bus that uses some primitives that the i2c backend doesn't implement yet. I really need users that have one of those machine to come back to me so we can get that done right, though the errors themselves should be harmless, I suspect the machine might not run at full speed). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] 1/5 powerpc: Rework PowerMac i2c part 1Benjamin Herrenschmidt
This is the first part of a rework of the PowerMac i2c code. It completely reworks the "low_i2c" layer. It is now more flexible, supports KeyWest, SMU and PMU i2c busses, and provides functions to match device nodes to i2c busses and adapters. This patch also extends & fix some bugs in the SMU driver related to i2c support and removes the clock spreading hacks from the pmac feature code rather than adapting them to the new API since they'll be replaced by the platform function code completely in patch 3/5 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] via-pmu: compile without Power Management supportKristian Mueller
Fix compilation of via-pmu.c without Power Management support. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Remove device_node addrs/n_addrBenjamin Herrenschmidt
The pre-parsed addrs/n_addrs fields in struct device_node are finally gone. Remove the dodgy heuristics that did that parsing at boot and remove the fields themselves since we now have a good replacement with the new OF parsing code. This patch also fixes a bunch of drivers to use the new code instead, so that at least pmac32, pseries, iseries and g5 defconfigs build. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: udbg updatesBenjamin Herrenschmidt
The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Unify udbg (#2)Benjamin Herrenschmidt
This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08macintosh: Always export pmu_[un]register_sleep_notifier if CONFIG_PM setPaul Mackerras
This fixes a build error when building the pmac sound driver as a module for 64-bit powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc: fix a bunch of warningsBenjamin Herrenschmidt
Building a PowerMac kernel with ARCH=powerpc causes a bunch of warnings, this fixes some of them Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02powerpc: exclude powerbook sleep code with CONFIG_PPC64 and CONFIG_PMPaul Mackerras
We were getting powerbook sleep code included, and giving compile errors, with CONFIG_PM=y on a 64-bit build. This excludes that code so the kernel will compile. One day BenH will implement on sleep on the G5... Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Merge time.c and asm/time.h.Paul Mackerras
We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26powerpc: Merge enough to start building in arch/powerpc.Paul Mackerras
This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19[PATCH] powerpc: Remove sections use from ppc64 and driversJon Loeliger
Here is a new patch that removes all notion of the pmac, prep, chrp and openfirmware initialization sections, and then unifies the sections.h files without those __pmac, etc, sections identifiers cluttering things up. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-05[PATCH] swsusp: switch pm_message_t to structPavel Machek
This adds type-checking to pm_message_t, so that people can't confuse it with int or u32. It also allows us to fix "disk yoyo" during suspend (disk spinning down/up/down). [We've tried that before; since that cpufreq problems were fixed and I've tried make allyes config and fixed resulting damage.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] ppc32: Remove CONFIG_PMAC_PBOOKBenjamin Herrenschmidt
This patch removes CONFIG_PMAC_PBOOK (PowerBook support). This is now split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some powerbooks have, CONFIG_PM for power management related code, and just left out of any CONFIG_* option for some generally useful stuff that can be used on non-laptops as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] ppc32: Bump PMU interrupt priorityBenjamin Herrenschmidt
The Power Management Unit on PowerMacs is very sensitive to timeouts during async message exchanges. It uses rather crude protocol based on a shift register with an interrupt and is almost continuously exchanging messages with the host CPU on laptops. This patch adds a routine to the open_pic driver to be able to select a PMU driver so that it bumps it's interrupt priority to above the normal level. This will allow PMU interrupts to occur while another interrupt is pending, and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to a timeout in PMU communication caused by excessive interrupt latency. The problem is very rare, and usually just doesn't happen, but it is still useful to make things even more robust. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-09[PATCH] ppc32: Fix nasty sleep/wakeup problemBenjamin Herrenschmidt
Despite all the care lately in making the powermac sleep/wakeup as robust as possible, there is still a nasty related to the use of cpufreq on PMU based machines. Unfortunately, it affects paulus old powerbook so I have to fix it :) We didn't manage to understand what is precisely going on, it leads to memory corruption and might have to do with RAM not beeing properly refreshed when a cpufreq transition is done right before the sleep. The best workaround (and less intrusive at this point) we could come up with is included in this patch. We basically do _not_ force a switch to high speed on suspend anymore (that is what is causing the problem) on those machines. We still force a speed switch on wakeup (since we don't know what speed we are coming back from sleep at, and that seems to work fine). Since, during this short interval, the actual CPU speed might be incorrect, we also hack around by multiplying loops_per_jiffy by 2 (max speed factor on those machines) during early wakeup stage to make sure udelay's during that time aren't too short. For after 2.6.12, we'll change udelay implementation to use the CPU timebase (which is always constant) instead like we do on ppc64 and thus get rid of all those problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>