aboutsummaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)Author
2007-05-09drivers/md.c: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm log: fix resume failed log deviceJonathan Brassow
This patch removes the possibility of having uninitialized log state if the log device has failed. When a mirror resumes operation, it calls 'resume' on the logging module. If disk based logging is being used, the log device is read to fill in the log state. If the log device has failed, we cannot simply return, because this would leave the in-memory log state uninitialized. Instead, we assume all regions are out-of-sync and reset the log state. Failure to do this could result in the logging code reporting a region as in-sync, even though it isn't; which could result in a corrupted mirror. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm raid1: switch rh_in_sync to blocking in do_readsJonathan Brassow
The call to rh_in_sync() in do_reads() should be allowed to block. It is in the mirror worker thread which already permits blocking operations. This will be needed to support clustered mirroring which will perform network operations. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm raid1: fix to commit pending clear region requestsJonathan Brassow
With the code as it is, it is possible for oustanding clear region requests never to get flushed when a mirror is deactivated or suspended. This means there will always be some resync work required when a mirror is activated, even though it may very well be in-sync. Always requesting the flush doesn't hurt us. This is because the log tracks whether any changes occurred and, if not, no flush is performed. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm: delay targetHeinz Mauelshagen
New device-mapper target that can delay I/O (for testing). Reads can be separated from writes, redirected to different underlying devices and delayed by differing amounts of time. Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm: bio list helpersHeinz Mauelshagen
More bio_list helper functions for new targets (including dm-delay and dm-loop) to manipulate lists of bios. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Bryn Reeves <breeves@redhat.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm io: remove old interfaceMilan Broz
Remove old dm-io interface. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm raid1: update dm io interfaceMilan Broz
This patch ports dm-raid1.c to the new dm-io interface. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm log: update dm io interfaceHeinz Mauelshagen
This patch ports dm-log.c to the new dm-io interface in order to make it scalable to have a large number of persistent dirty logs active in parallel. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Cc: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm exception store: update dm io interfaceHeinz Mauelshagen
This patch ports dm-exception-store.c to the new, scalable dm_io() interface. It replaces dm_io_get()/dm_io_put() by dm_io_client_create()/dm_io_client_destroy() calls and dm_io_sync_vm() by dm_io() to achive this. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Cc: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm kcopyd: update dm io interfaceMilan Broz
This patch ports kcopyd.c to the new, scalable dm_io() interface. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm io: new interfaceHeinz Mauelshagen
Add a new API to dm-io.c that uses a private mempool and bio_set for each client. The new functions to use are dm_io_client_create(), dm_io_client_destroy(), dm_io_client_resize() and dm_io(). Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm io: prepare for new interfaceHeinz Mauelshagen
Introduce struct dm_io_client to prepare for per-client mempools and bio_sets. Temporary functions bios() and io_pool() choose between the per-client structures and the global ones so the old and new interfaces can co-exist. Make error_bits optional. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm io: delay dec_countHeinz Mauelshagen
Delay decrementing the 'struct io' reference count until after the bio has been freed so that a bio destructor function may reference it. Required by a later patch. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm raid1: add handle_errors feature flagJonathan E Brassow
This patch adds the ability to specify desired features in the mirror constructor/mapping table. The first feature of interest is "handle_errors". Currently, mirroring will ignore any I/O errors from the devices. Subsequent patches will check for this flag and handle the errors. If flag/feature is not present, mirror will do nothing - maintaining backwards compatibility. Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm log: report fault statusJonathan E Brassow
This patch reports the status of the log device so that userspace can detect the error and take appropriate action. Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm log: fault detectionJonathan E Brassow
This patch gives the disk logging code the ability to store the fact that an error occured on the log device. In addition, an event is raised when an error is encountered during I/O to the log device. Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm: allow offline devicesMike Anderson
Allow check_device_area to succeed if a device has an i_size of zero. This addresses an issue seen on DASD devices setting up a multipath table for paths in online and offline state. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm mpath: log device nameEdward Goggin
Make the mapped device structure accessible to hardware handlers so error messages can include the device name. Signed-off-by: Edward Goggin <egoggin@emc.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm crypt: add null ivLudwig Nussel
Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm crypt: use smaller bvecs in clonesOlaf Kirch
Allocate smaller clones With the previous dm-crypt fixes, there is no need for the clone bios to have the same bvec size as the original - we just need to make them big enough for the remaining number of pages. The only requirement is that we clear the "out" index in convert_context, so that crypt_convert starts storing data at the right position within the clone bio. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm crypt: fix remove first_cloneOlaf Kirch
Get rid of first_clone in dm-crypt This gets rid of first_clone, which is not really needed. Apparently, cloned bios used to share their bvec some time way in the past - this is no longer the case. Contrarily, this even hurts us if we try to create a clone off first_clone after it has completed, and crypt_endio has destroyed its bvec. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm crypt: fix avoid cloned bio ref after freeOlaf Kirch
Do not access the bio after generic_make_request We should never access a bio after generic_make_request - there's no guarantee it still exists. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm crypt: fix call to clone_initOlaf Kirch
Call clone_init early We need to call clone_init as early as possible - at least before call bio_put(clone) in any error path. Otherwise, the destructor will try to dereference bi_private, which may still be NULL. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm crypt: disable barriersMilan Broz
Disable barriers in dm-crypt because of current workqueue processing can reorder requests. This must be addresed later but for now disabling barriers is needed to prevent data corruption. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09dm raid1: one kmirrord per mirrorHolger Smolinski
This patch replaces the single instance of kmirrord by one instance per mirror set. This change is required to avoid a deadlock in kmirrord when the persistent dirty log of a mirror itself resides on a mirror. The single instance of kmirrord then issues a sync write to the dirty log in write_bits which gets deferred to kmirrord itself later in the call chain. But kmirrord never does the deferred work because it is still waiting for the sync write_bits. _mirror_sets is removed as it no longer needed, and we always flush the workqueue before destroying it to ensure all work is complete before destroying it. Signed-off-by: Holger Smolinski <smolinski@de.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Remove do_sync_file_range()Mark Fasheh
Remove do_sync_file_range() and convert callers to just use do_sync_mapping_range(). Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07mm: remove destroy_dirty_buffers from invalidate_bdev()Peter Zijlstra
Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't been used in 6 years (so akpm says). find * -name \*.[ch] | xargs grep -l invalidate_bdev | while read file; do quilt add $file; sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file; done Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-30[BLOCK] Don't pin lots of memory in mempoolsJens Axboe
Currently we scale the mempool sizes depending on memory installed in the machine, except for the bio pool itself which sits at a fixed 256 entry pre-allocation. There's really no point in "optimizing" this OOM path, we just need enough preallocated to make progress. A single unit is enough, lets scale it down to 2 just to be on the safe side. This patch saves ~150kb of pinned kernel memory on a 32-bit box. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-12[PATCH] md: fix calculation for size of filemap_attr array in md/bitmapNeil Brown
If 'num_pages' were ever 1 more than a multiple of 8 (32bit platforms) or of 16 (64 bit platforms). filemap_attr would be allocated one 'unsigned long' shorter than required. We need a round-up in there. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04[PATCH] md: avoid a deadlock when removing a device from an md array via sysfsNeilBrown
A device can be removed from an md array via e.g. echo remove > /sys/block/md3/md/dev-sde/state This will try to remove the 'dev-sde' subtree which will deadlock since commit e7b0d26a86943370c04d6833c6edba2a72a6e240 With this patch we run the kobject_del via schedule_work so as to avoid the deadlock. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27[PATCH] md: convert compile time warnings into runtime warningsNeilBrown
... still not sure why we need this .... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27[PATCH] md: clear the congested_fn when stopping a raid5NeilBrown
If this mddev and queue got reused for another array that doesn't register a congested_fn, this function would get called incorretly. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27[PATCH] md: allow raid4 arrays to be reshapedNeilBrown
All that is missing the the function pointers in raid4_pers. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16[PATCH] fix read past end of array in md/linear.cAndy Isaacson
When iterating through an array, one must be careful to test one's index variable rather than another similarly-named variable. The loop will read off the end of conf->disks[] in the following (pathological) case: % dd bs=1 seek=840716287 if=/dev/zero of=d1 count=1 % for i in 2 3 4; do dd if=/dev/zero of=d$i bs=1k count=$(($i+150)); done % ./vmlinux ubd0=root ubd1=d1 ubd2=d2 ubd3=d3 ubd4=d4 # mdadm -C /dev/md0 --level=linear --raid-devices=4 /dev/ubd[1234] adding some printks, I saw this: [42949374.960000] hash_spacing = 821120 [42949374.960000] cnt = 4 [42949374.960000] min_spacing = 801 [42949374.960000] j=0 size=820928 sz=820928 [42949374.960000] i=0 sz=820928 hash_spacing=820928 [42949374.960000] j=1 size=64 sz=64 [42949374.960000] j=2 size=64 sz=128 [42949374.960000] j=3 size=64 sz=192 [42949374.960000] j=4 size=1515870810 sz=1515871002 Cc: Gautham R Shenoy <ego@in.ibm.com> Acked-by: Neil Brown <neilb@cse.unsw.edu.au> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] md: fix for raid6 reshapeNeilBrown
Recent patch for raid6 reshape had a change missing that showed up in subsequent review. Many places in the raid5 code used "conf->raid_disks-1" to mean "number of data disks". With raid6 that had to be changed to "conf->raid_disk - conf->max_degraded" or similar. One place was missed. This bug means that if a raid6 reshape were aborted in the middle the recorded position would be wrong. On restart it would either fail (as the position wasn't on an appropriate boundary) or would leave a section of the array unreshaped, causing data corruption. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: add support for reshape of a raid6NeilBrown
i.e. one or more drives can be added and the array will re-stripe while on-line. Most of the interesting work was already done for raid5. This just extends it to raid6. mdadm newer than 2.6 is needed for complete safety, however any version of mdadm which support raid5 reshape will do a good enough job in almost all cases (an 'echo repair > /sys/block/mdX/md/sync_action' is recommended after a reshape that was aborted and had to be restarted with an such a version of mdadm). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: restart a (raid5) reshape that has been aborted due to a ↵NeilBrown
read/write error An error always aborts any resync/recovery/reshape on the understanding that it will immediately be restarted if that still makes sense. However a reshape currently doesn't get restarted. With this patch it does. To avoid restarting when it is not possible to do work, we call into the personality to check that a reshape is ok, and strengthen raid5_check_reshape to fail if there are too many failed devices. We also break some code out into a separate function: remove_and_add_spares as the indent level for that code was getting crazy. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: clean out unplug and other queue function on md shutdownNeilBrown
The mddev and queue might be used for another array which does not set these, so they need to be cleared. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: move warning about creating a raid array on partitions of the ↵NeilBrown
one device md tries to warn the user if they e.g. create a raid1 using two partitions of the same device, as this does not provide true redundancy. However it also warns if a raid0 is created like this, and there is nothing wrong with that. At the place where the warning is currently printer, we don't necessarily know what level the array will be, so move the warning from the point where the device is added to the point where the array is started. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: RAID6: clean up CPUID and FPU enter/exit codeH. Peter Anvin
- Use kernel_fpu_begin() and kernel_fpu_end() - Use boot_cpu_has() for feature testing even in userspace Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: fix raid10 recovery problem.NeilBrown
There are two errors that can lead to recovery problems with raid10 when used in 'far' more (not the default). Due to a '>' instead of '>=' the wrong block is located which would result in garbage being written to some random location, quite possible outside the range of the device, causing the newly reconstructed device to fail. The device size calculation had some rounding errors (it didn't round when it should) and so recovery would go a few blocks too far which would again cause a write to a random block address and probably a device error. The code for working with device sizes was fairly confused and spread out, so this has been tided up a bit. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: md: remove unnecessary insert_at_head flagEric W. Biederman
The sysctls used by the md driver are have unique binary numbers so remove the insert_at_head flag as it serves no useful purpose. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct file_operations const 4Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@sdl.org: dvb fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] remove invalidate_inode_pages()Andrew Morton
Convert all calls to invalidate_inode_pages() into open-coded calls to invalidate_mapping_pages(). Leave the invalidate_inode_pages() wrapper in place for now, marked as deprecated. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[PATCH] md: avoid possible BUG_ON in md bitmap handlingNeil Brown
md/bitmap tracks how many active write requests are pending on blocks associated with each bit in the bitmap, so that it knows when it can clear the bit (when count hits zero). The counter has 14 bits of space, so if there are ever more than 16383, we cannot cope. Currently the code just calles BUG_ON as "all" drivers have request queue limits much smaller than this. However is seems that some don't. Apparently some multipath configurations can allow more than 16383 concurrent write requests. So, in this unlikely situation, instead of calling BUG_ON we now wait for the count to drop down a bit. This requires a new wait_queue_head, some waiting code, and a wakeup call. Tested by limiting the counter to 20 instead of 16383 (writes go a lot slower in that case...). Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[PATCH] md: fix various bugs with aligned reads in RAID5Neil Brown
It is possible for raid5 to be sent a bio that is too big for an underlying device. So if it is a READ that we pass stright down to a device, it will fail and confuse RAID5. So in 'chunk_aligned_read' we check that the bio fits within the parameters for the target device and if it doesn't fit, fall back on reading through the stripe cache and making lots of one-page requests. Note that this is the earliest time we can check against the device because earlier we don't have a lock on the device, so it could change underneath us. Also, the code for handling a retry through the cache when a read fails has not been tested and was badly broken. This patch fixes that code. Signed-off-by: Neil Brown <neilb@suse.de> Cc: "Kai" <epimetreus@fastmail.fm> Cc: <stable@suse.de> Cc: <org@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26[PATCH] md: remove unnecessary printk when raid5 gets an unaligned read.NeilBrown
raid5_mergeable_bvec tries to ensure that raid5 never sees a read request that does not fit within just one chunk. However as we must always accept a single-page read, that is not always possible. So when "in_chunk_boundary" fails, it might be unusual, but it is not a problem and printing a message every time is a bad idea. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26[PATCH] md: fix potential memalloc deadlock in mdNeilBrown
If a GFP_KERNEL allocation is attempted in md while the mddev_lock is held, it is possible for a deadlock to eventuate. This happens if the array was marked 'clean', and the memalloc triggers a write-out to the md device. For the writeout to succeed, the array must be marked 'dirty', and that requires getting the mddev_lock. So, before attempting a GFP_KERNEL allocation while holding the lock, make sure the array is marked 'dirty' (unless it is currently read-only). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>