aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/dvb-usb
AgeCommit message (Collapse)Author
2008-06-26V4L/DVB (8015): gl861: replace non critical msleep(0) with msleep(1) to be ↵Antti Palosaari
on the safe side - change msleep(0) to msleep(1) Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8013): gl861: remove useless identify_stateAntti Palosaari
- remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8012): gl861: sleep a little to avoid I2C errorsAntti Palosaari
- add little sleep to avoid I2C errors arising on faster CPUs Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7971): usb: unalignedAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7969): m920x: unaligned accessAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7961): fix endianness bug in dib0700_devices.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7910): usb: input layer dependency fixesIngo Molnar
testing of the -tip tree found the following build failures on 2.6.26-rc3: drivers/built-in.o: In function `ttusb_dec_disconnect': ttusb_dec.c:(.text+0xa2c95): undefined reference to `input_unregister_device' drivers/built-in.o: In function `dvb_usb_read_remote_control': dvb-usb-remote.c:(.text+0xa6a94): undefined reference to `input_event' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_03_48_57_CEST_2008.bad these are due to the media/dvb/usb layer having dependencies on INPUT functionality, without having that spelled out in the Kconfig file. this patch makes that dependency explicit (for the drivers affected), which solves the build error. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7903): gp8psk_power_ctrl should return negative errorsMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7851): Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29Rename common tuner Kconfig names to use the sameMauro Carvalho Chehab
namespace for all of them.
2008-04-29V4L/DVB(7767): Move tuners to common/tunersMauro Carvalho Chehab
There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25v4l/dvb: add statics to avoid multiple definitionsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24V4L/DVB (7662): stv0299: Fixed some typosOliver Endriss
Fixed some typos. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7654): tda10086: make the xtal frequency a configuration optionHartmut Hackmann
Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7651): tuner-xc2028: Several fixes to SCODEMauro Carvalho Chehab
This patch fixes several issues on SCODE: 1) The extracting tool weren't generating the proper tags for SCODE. This has almost no effect, since those tags shouldn't be used; 2) DIBCOM52 were using a wrong IF. It should be 5200, instead of 5700; 3) seek_firmware were wanting an exact match for firmware type. This is wrong. As result, no SCODE firmware were loaded; 4) A few files were including the wrong file for seeking demod firmwares; 5) XC3028_FE_DEFAULT can be used, if user doesn't want to load a firmware. However, this weren't documentated. This feature require more testing. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7538): Adds selectable adapter numbers as per module optionJanne Grunau
The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Acked-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7513): media/dvb/dvb-usb replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7476): New USB ID for Leadtek DVB-T USBDarryl Green
Detect Leadtek Winfast USB DTV Dongle with ID of 0x6f01 Signed-off-by: Darryl Green <darryl.green@aanet.com.au> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7475): Added support for Terratec Cinergy T USB XXSAlexander Simon
Alexander Simon found out that the Terratec Cinergy T USB XXS is just a clone of another DiB7070P-based device. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7474): support key repeat with dib0700 ir receiverPatrick Boettcher
This patch enables support for repeating last event when a key is holded down with dib0700 devices. It works with rc5 and nec remotes. It also fixes an annoying bug that floods kernel log with "Unknown key" messages after each keypress. This happened because the driver was not resetting infrared register after each poll so it kept polling last key even if nothing was being pressed. Fixing this, (calling rc_setup after each poll), permits to implement key repeat. Signed-off-by: Filippo Argiolas <filippo.argiolas at gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7473): PATCH for various Dibcom based devicesAlbert Comerma
This patch introduces support for dvb-t for the following DiBcom based cards: - Terratec Cinergy HT USB XE (USB-ID: 0ccd:0058) - Terratec Cinergy HT Express (USB-ID: 0ccd:0060) - Pinnacle 320CX (USB-ID: 2304:022e) - Pinnacle PCTV72e (USB-ID: 2304:0236) - Pinnacle PCTV73e (USB-ID: 2304:0237) - Yuan EC372S (USB-ID: 1164:1edc) Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Felix Apitzsch <F.Apitzsch@soz.uni-frankfurt.de> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7472): reworked patch to support TT connect S-2400Andre Weidemann
Added support for Technotrend connect S-2400. Signed-off-by: Andre Weidemann <Andre.Weidemann@web.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7441): kconfig fixes for tuner-simpleMichael Krufky
Update Kconfig for the hybrid devices recently converted to use tuner-simple rather than dvb-pll. dvb-bt8xx no longer uses dvb-pll at all, so remove all references to dvb-pll within that driver. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7413): use tuner-simple for Philips FMD1216ME digital tuning supportMichael Krufky
Convert cxusb, cx88-dvb and saa7134-dvb to use tuner-simple instead of dvb-pll for Philips FMD1216ME Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7412): use tuner-simple for LG TDVS-H06xF digital tuning supportMichael Krufky
Convert cx88-dvb, dvb-bt8xx, b2c2-flexcop, cxusb and cx23885 to use tuner-simple instead of dvb-pll for LG TDVS-H06xF Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7399): Removes video_dev from tuner-xc2028 config structMauro Carvalho Chehab
The video_dev parameter, on tuner-xc2028 were used to pass i2c private data to tuner_callback. Since the driver already have a pointer to i2c_adap->algo_data, uses this instead. This parameter were used also as a magic number to idenfity if two drivers are trying to register the same xc3028 tuner. This occurs with boards with DVB support, where both DVB and V4L drivers will share the same tuner. Instead of using the algo_data as a private number, after this patch, the driver will use i2c_adap->dev, with seems more consistent. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-20V4L/DVB (7328): usb/opera1.c: fix a memory leakAdrian Bunk
This patch fixes a memory leak in the "testval == 0x67" case spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7186): tda10086: make the 22kHz tone for DISEQC a config optionHartmut Hackmann
Some cards need the diseqc signal modulated, while some just need the envelope to control the LNB supply. This fixes Bug 9887 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7075): Make a local function staticPatrick Boettcher
Make a local function static Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7073): DiB7070: Reception quality improvedPatrick Boettcher
Removing two bugs to improve sensitivity for DiB7070 and Dib7000P with MT2266. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7072): sets the MT2060 IF1 frequency according to EEPROMOlivier DANET
Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users. It sets the MT2060 IF1 frequency according to the calibration values stored in the EEPROM. It is supposed to enhance the signal quality, but, hey, there is no guarantee. Feedbacks would be much appreciated, to know whether it deserves being applied. Signed-off-by: Olivier DANET <odanet at caramail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7071): DiB0700: Start streaming the right wayPatrick Boettcher
There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7069): Support for myTV.tDarren Salt
Here's a roll-up which provides support for both this and the myTV.t. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7068): Add support for WinTV Nova-T-CE driverTim Taubert
Add support for WinTV Nova-T-CE driver Signed-off-by: Tim Taubert <ttmails@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7066): ASUS My Cinema U3000 Mini DVBT TunerDaniel Gimpelevich
Adding support for ASUS My Cinema U3000 Mini DVBT Tuner Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7065): Artec T14BR patchesYousef Lamlum
Added Artec T14BR support Signed-off-by: Yousef Lamlum <yousef@youseflamlum.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7054): ansonic branded dvb-t usb stick support in the af9005 driverLuca Olivetti
Marcos Melero (marcosmelero at gmail.com) reported he could make his dvb-t usb stick work with the af9005 driver by changing the device ids (10b9:6000). The stick is branded "Ansonic" (one of the brands of a spanish chain of supermarkets) with no other identification of the model. Since neither Marcos nor me know the OEM for the stick, in the attached patch I used Ansonic for the ids/description. Signed-off-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6659): Convert MTS to bitfieldMauro Carvalho Chehab
Xc2028.3028 has two type of firmwares: audio-standard specific ones and baseband MTS firmwares. MTS firmwares provide stereo decoding for 6 MHz BTSC/EIAJ and for monoaural audio decoding on 8 MHz firmwares. It seems that the option to use MTS or a standard-specific audio decoding depends on the way xc2028/3028 is connected. Instead of wasting 32 (or 64 bits) to signalize if the driver needs to use MTS firmware, this patch converts it to a bitfield that can be shared with other proprieties of xc2028/3028. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6656): zl10353: store frequencies in 0.1kHz to eliminate rounding ↵Chris Pascoe
errors Whilst reanalysing my formulas I realised it was no longer possible to get the right values for a 36.1667MHz IF due to rounding problems. Storing frequencies in units of 0.1kHz makes it possible to calculate these again correctly. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6655): Add support for MT352-based DViCO FusionHDTV DVB-T NANO devicesChris Pascoe
There are at least three variants of the DViCO FusionHDTV DVB-T NANO that share the same USB device ID. The first (ZL10353 w/ firmware in ROM) is already supported; the latter two both require firmware and have either an MT352 or ZL10353 demodulator, and have a different IR receiver from the first. This introduces a new identify_state that can tell the difference between a "warm" device which is running the embedded firmware, and a "cold" device that needs us to upload firmware to it before it will work. We patch the uploaded device ID (like we do for other bluebird devices) to make it easy to identify the particular device variant when it reattaches. NB: These devices use a different firmware file from previous bluebird devices. You need a new firmware file to make this work. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6653): Add support for the DViCO FusionHDTV NANO2 w/ZL10353 and ↵Chris Pascoe
firmware Add support for the DViCO FusionHDTV DVB-T NANO with zl10353 demodulator and firmware in ROM on the device. Again, this is based on the great work of Mike Krufky with my modifications to use the in-tree XC2028 driver. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6649): Add support for the DViCO FusionHDTV Dual Digital 4Chris Pascoe
Add support for DViCO's Dual Digital 4 with xc3028 tuner, zl10353 DVB-T demodulator and a new-style I2C IR remote control receiver. This would not have been possible without the work of and advice from Mike Krufky, who originally got the Dual Digital 4 and second-gen DVB-T NANO devices working with the out-of-tree XC3028 driver. I converted it to use the in-tree XC3028 driver (after making it suitable for our use), and added the IR remote control support based on his advice. NB: a firmware package is required to use this device. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6627): CXUSB: handle write then read from different addressChris Pascoe
The path to perform a read immediately after a write was not checking that the address being read from was the same as the one that was written. Handling this case correctly should mean that we now can handle more than two i2c messages at a time. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6626): CXUSB: support only-read i2c requestsChris Pascoe
Any i2c read request that was not immediately preceded by a write request was incorrectly taking the write path. Add the capability to handle individual read requests. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6625): CXUSB: i2c transfer failure notificationChris Pascoe
The i2c master_xfer routine should return a negative result if not all transfers completed successfully. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6624): CXUSB: return control message transfer result to callerChris Pascoe
Callers to cxusb_ctrl_msg currently do not receive any indication that their transfer failed. Return the true return code from dvb_usb_generic_{rw,write}. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6589): Gigabyte u7000 usb dvb-t supportdominik
Signed-off-by: dominik <dominik95@free.fr> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6588): Leadtek Winfast DTV Dongle remote controlJaroslav Barton
Add remote controller support for Leadtek Winfast DTV Dongle based on DiB7700P, MT2060 and using last drivers (6040:6a79c243aecc), firmware dvb-usb-dib0700-03-pre1.fw Signed-off-by: Jaroslav Barton <djaara@djaara.net> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6578): dvb-usb: make some debug vars staticAdrian Bunk
This patch makes some needlessly global debug variables static. opera1.h became so small that I removed it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6572): dvb-usb/vp702x.c: cleanupsAdrian Bunk
This patch contains the following cleanups: - make the needlessly global vp702x_usb_out_op() static - #if 0 the unused vp702x_power_ctrl() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 19:51:25 +0000